Keenetic Giga (KN-1010) - Discussion | [wifirouter]
RU C-TW.РђРЇ46. Р’.82580 (up to 10.26.2022) .pdf.zip
Instructions for use KN-1010.pdfI'm tired of waiting for our region to appear ...
Who has already taken, as with the stability of the case?
My first kenetic costs, it works 24/7 for its figs it knows how many years, it didn’t even reload it))
Who has already taken, as with the stability of the case?
My first kenetic costs, it works 24/7 for its figs it knows how many years, it didn’t even reload it))
metalcore @ 03.02.18, 19:01
Who has already taken, as with the stability of the case?
My first kenetic costs, it works 24/7 for its figs it knows how many years, it didn’t even reload it))
My first kenetic costs, it works 24/7 for its figs it knows how many years, it didn’t even reload it))
I support the reviews.
I also have the first kinetics. So if you do not reboot once a week, then:
1. DHCP falls
2. web muzzle is not loaded
3. CPU utilization over 60%
It can be connected with the load, all the same, 20 devices ... in short, once a week, a hard reboot on nutrition ...
Bugs__bunny @ 03.02.18, 19:13
I support the reviews.
I also have the first kinetics. So if you do not reboot once a week, then:
1. DHCP falls
2. web muzzle is not loaded
3. CPU utilization over 60%
It can be connected with the load, all the same, 20 devices ... in short, once a week, a hard reboot on nutrition ...
I also have the first kinetics. So if you do not reboot once a week, then:
1. DHCP falls
2. web muzzle is not loaded
3. CPU utilization over 60%
It can be connected with the load, all the same, 20 devices ... in short, once a week, a hard reboot on nutrition ...
I think that the point is in the load, I immediately run ahead - approximately 15-20 people easily hang ULTRA II.
P.S. I checked it, in this new year, on the last stable firmware, the router is not mine - a friend.
Of these, 10-15 people were on the waffle, the router itself did not hang, the waffle with dhcp fell off.
If you have a lot of clients, I would look in the direction of Mikrotik, at work I most often use them.
I just have Cisco and Mikrotik enough at work, so I decided to use a new kinetics =)
Post has been editedmetalcore - 03.02.18, 20:20
metalcore @ 03.02.18, 20:19
If you have a lot of clients, I would look in the direction of Mikrotik, at work I most often use them.
I just have Cisco and Mikrotik enough at work, so I decided to use a new kinetics =)
I just have Cisco and Mikrotik enough at work, so I decided to use a new kinetics =)
I have many wired customers who eat well: 2TV, soundbar, 2 pcs.
But on the wafer ... 4 phones, printer and tablet ...
Damn, in short a bit too much, I hope will pull. Well, or again I will restart once a week. I've already got used to it ... I want 5 GHz more, and I hope I’ll probably have a zone more ... (this is the main complaint)
Post has been editedbugs__bunny - 03.02.18, 21:14
In Arkhangelsk in TechnoPoint, the price is 7390. In principle, if 6650 + is delivered on an OnlineTrade, then that will be the case. But with a guarantee (if anything) in a local store is easier to understand !!! Although probably wait ULTRA. At IXBT, a good vecta about new Kineticshttp://forum.ixbt.com/topic.cgi?id=14:64881
Post has been editedAndreiyArh - 03.02.18, 21:21
Post has been editedAndreiyArh - 03.02.18, 21:21
Gan77, a router as a router, only a miserable torrent (speed is 2.5 times lower than it should be), it will be necessary to install a normal one via opkg
AndreiyArh @ 03.02.18, 14:09
Warranty only 12 months.
She has always been 12 months. When registering a device in support, an additional second year is given.
metalcore @ 03.02.18, 19:01
Who has already taken, as with the stability of the case?
I think it will not be much different from the same Ultra II, except for the wireless part
metalcore @ 03.02.18, 20:19
15-20 people hang easily ULTRA II.
Wireless - I will believe. Wired - weird. Giga II keeps calm ~ 40 wired clients, Ultra II and more. But with WiFi in G3 / U2, in some cases a lot of strange glitches occur, here we are promised a new chip, which in theory will decide a lot of old sores (whether new ones will add - that is the question).
AndreiyArh @ 03.02.18, 21:20
But with a guarantee (if anything) in a local store is easier to understand
The zuhel with mailing under warranty has long had no problems (well, except for the time spent, but local SCs often take the same amount of time as sending to Moscow time and back), Neoset SC and sending mail to it remained after the separation.
I sent a white kinetics under warranty in 2012, and that's literally at the end of 2017 Plus DSL.
Worth firmware 2.11 beta. It has the opportunity to see the new interface.
It did not find WOL for registered devices. Who knows, in 2.12 added?
Post has been editeddim_x - 03.02.18, 23:24
It did not find WOL for registered devices. Who knows, in 2.12 added?
Post has been editeddim_x - 03.02.18, 23:24
People! Measure, please, you need an exact figure in millimeters, what is its thickness (along with protruding parts, legs, for example, if there is) ?????? Must be placed between the wardrobe and the concrete wall
dim_x To view the "new web", you need to install the component angular-ndw, aka "New Web Interface Design (beta)". To do this, go to the settings of the router through the console and enter the command: components
install angular-ndw
commit
install angular-ndw
commit
or in WebUI put the checkbox opposite "New web interface design (beta)" inhttp://192.168.1.1/#tools.components, then Install.
WOL is, you can learn about it in the articles of the knowledge base:
Work Wake on LAN through the Internet Center
Using the Wake on LAN feature in Keenetic Internet Centers
Post has been editedenpa - 04.02.18, 15:12
sege33, more information please? Firmware version? Transmission? How is external media connected? Through a hub dock with active power? What file system, markup, partition? What do you download from? What is the internet channel? enpa, NDMS Version 2.10.C.2.0-0
I did not find the Transmission version, how do I find out?
External WD USB 3.0 500GB NTFS drive directly to the router.
I’m downloading, for example, a series from a rutracker, 41.81 GB
Beeline provider, PPPoE 100/100
Download from 2.5 to 3.5 MB / s.
The same file, through UTorrent on the laptop, downloads 8-9 MB / s.
enpa, Found Transmission version: 2.84 (14307)
NikIv @ 04.02.18, 16:55
With firmware 2.11, the download speed limit has been removed
This, as I understand it, is experimental firmware.
How stable is 2.12?
[email protected], 15:10
dim_x, to view the "new web", you need to install the component angular-ndw, aka "New design of the web interface (beta)". To do this, go to the settings of the router through the console and enter the command:
components
install angular-ndw
commit
or in WebUI put the checkbox opposite "New web interface design (beta)" inhttp://192.168.1.1/#tools.components, then Install.
WOL is, you can learn about it in the articles of the knowledge base:
Work Wake on LAN through the Internet Center
Using the Wake on LAN feature in Keenetic Internet Centers
components
install angular-ndw
commit
or in WebUI put the checkbox opposite "New web interface design (beta)" inhttp://192.168.1.1/#tools.components, then Install.
WOL is, you can learn about it in the articles of the knowledge base:
Work Wake on LAN through the Internet Center
Using the Wake on LAN feature in Keenetic Internet Centers
You understood me wrong. I talked about the "wake up on the network" button in the new interface.
In the old there is a button:
 |
In her new no.
Post has been editeddim_x - 04.02.18, 19:07
Gentlemen, how to make crowns work on it? Plain crowns. I know that the question is stupid. there is a bunch of manas, the problem is just in the "heap" - it is difficult to figure out what is suitable / not suitable for firmware I understand that somehow you need to use Entware + OPKG?
PS>On the recommendation of a friend, he took this Keenetic (five years ago I had a kinetics - nothing good, just negative). As always, the kinetics of one problem - a bunch of minced meat and weak iron that doesn’t pull this pile :) Other manufacturers - hellish iron fit for the laptop, and firmware that doesn’t know anything (TP-Link, Netgear). Another nuance of MU-MIMO works crookedly, with the clients option enabled on 5Ghz sausage (unstable signal) when disconnected - all good.
Post has been editedglaberzu - 04.02.18, 18:51
PS>On the recommendation of a friend, he took this Keenetic (five years ago I had a kinetics - nothing good, just negative). As always, the kinetics of one problem - a bunch of minced meat and weak iron that doesn’t pull this pile :) Other manufacturers - hellish iron fit for the laptop, and firmware that doesn’t know anything (TP-Link, Netgear). Another nuance of MU-MIMO works crookedly, with the clients option enabled on 5Ghz sausage (unstable signal) when disconnected - all good.
Post has been editedglaberzu - 04.02.18, 18:51
Glaberzu @ 02/04/18, 18:50
As I understand it, somehow I need to enter Entware + OPKG?
That is the way it is.
there isresourcewhere you can learn a lot of useful things.
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement