[X]Assistant

[enpa]

Keenetic Giga (KN-1010)- Discussion
ZyXEL Keenetic Giga III - Discussion

Information

• Official Keenetic Community Firm Support Forum
  
• Official Support Center on Keenetic.net (registration is required)
  
• Registering a device on Keenetic.net (3 years warranty from the date of purchase + 1 year upon registration)
  
• Keenetic authorized service centers:Russia, Ukraine, Kazakhstan, Republic of Belarus
  
• Transmitter Power at Keenetic Home Internet Centers

Description

• Product Name:Giga
  
• Part Number:KN-1010-01RU
  
• NDM HW ID:KN-1010

• Wi-Fi AC1300 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  
• Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  
• SFP port for connecting via fiber optic cable
  
• USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  
• File server, DLNA, Time Machine, standalone torrent client Transmission
  
• Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  
• Configure and manage your home network via mobileattachment

Additional photo

foto by enpa

Specifications

Main characteristics

The index of the model is KN-1010
The processor - MediaTek MT7621AT (MIPS1004Kc) 2x 880MHz
RAM - 256 MB (DDR3)
Flash memory - 128 MB (DB NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Wi-Fi class - MediaTek MT7615DN - 2x 2T2R 2.4 / 5GHz (867 + 400Mbps)
Antennas - 4x 5dBi (FEM, fixed PIFA ext), AC1200 (ARM + Andes)
Ports - SFP: 1x GbE (RJ45 / Combo), RJ45: 5x GbE, Switch: int. 5x GbE LED
Wi-Fi / WPS button вњ”
FN button - Yes, two buttons
USB ports вњ”
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Modes of access point, amplifier, adapter вњ”

Performance

2.4 GHz Wi-Fi network speed - 400 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
Gigabit home network вњ”
For tariffs above 100 Mbit / s вњ”
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE вњ”
PPPoE вњ”
PPTP вњ”
L2TP вњ”
802.1x
CABiNET вњ”
Multiple PPP Tunnels вњ”
PAP / CHAP / MS-CHAP / MS-CHAP v2 вњ”
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q вњ”
Route Table (DHCP / Manual) вњ”
Link Duo вњ”
IntelliQoS вњ”
DHCP (client / server) вњ”
IPv6 Dual Stack вњ”
NAT вњ”
Igmp вњ”
UPnP
Manual port forwarding вњ”
PPTP / L2TP Transit вњ”
SPI DoS Attack Firewall вњ”
Ping checker вњ”

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection вњ”
Support for additional guest Wi-Fi network вњ”
MAC access control вњ”
WPS Quick Setup вњ”
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS вњ”
Transmission torrent client вњ”
File server вњ”
DLNA server вњ”
UDP to HTTP proxy вњ”
FTP server вњ”
Print server вњ”
IPSec VPN Client / Server вњ”
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS вњ”
Parental control SkyDNS вњ”
Dynamic DNS client вњ”

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian вњ”
Command Line (CLI) by TELNET
The ability to control from the external network вњ”
Backup and restore configuration вњ”
Software update features вњ”
Logging system events вњ”

Equipment

Device
Power adapter вњ”
Ethernet cable вњ”
Instructions for use вњ”

List of supported SFP modules

These SFP modules were tested with Keenetic KN-1010, KN-1810 models by Keenetic engineers and owners of KN-1010 \ KN-1810:

List of SFP modules for working with Keenetic Giga (KN-1010) and Ultra (KN-1810)
SFP modules: MlaxLink ML-SG-3WDS-LB31S, Atop AP-B35121-3CS3, SNR SNR-SFP-W35-20 and KN-1810 with self-test & photo from enpa

Certificates

RU C-TW.РђРЇ46. Р’.82580 (up to 10.26.2022) .pdf.zip(3.25 MB)

RU00000034231 (up to 10/01/2025) .pdf.zip(574.25 KB)

Documentation

Instructions for use KN-1010.pdf(491.37 KB)

Description and Specifications KN-1010.pdf(442.65 KB)

Reference CLI command interface KN-1010 from 21.12.2018.pdf(4.14 MB)

Reference CLI command interface KN-1010 from 24.05.2019.pdf(4.48 MB)

Reviews, links

Keenetic Resources

Keenetic official website
Official Keenetic Block
VK official group
Official Facebook page
Instagram official page
Keenetic Telegram's Unofficial Channel
Information channel Keenetic firmware in Telegram
KeeneticOS Developer Forum

Reviews, tests, reviews

Full info on Giga KN-1010 on Keenetic.com
Keenetic Giga KN-1010 on the market.yandex.ru
Keenetic Giga KN-1010 router review: good luck! from 3dnews.ru
Introducing the Keenetic Giga KN1010 router from ixbt.com
Keenetic Giga KN-1010 Review from foxnetwork.ru
Feedback on KN-1010 from stalker-ua
We configure VPN on the KN-1010 router from denismajor.ru
Oneplus 6 Wi-Fi MINO 2x2 5 GHz + Keenetic KN-1010 + 1Gb Eth Provider from enpa
Read / write speed of SSD & Keenetic KN-1010 from enpa
Feedback on the work of the router and 4K from Pevzner
Feedback on the work of the router and 4K from IQman
Review of Wi-Fi router Keenetic GIGA (KN-1010): explosive mixture from weblance.com.ua
Feedback on the work of the router from Kemsone
An example of the work of a torrent client on a router with MTK7621 using the example of netdata graphics from balian007
Description, speed example, example of operation of the Transmission firmware torrent client in KN-1010 from enpa

Useful information

Problem solving, setup

NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ОњTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information 4.4.1.2 from Padavan
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Bridge mode for the optical terminal Rostelecom from healer2001
An example of creating a directory using the command 'mkdir' in the console from enpa
Using Emoji in the name of the Access Point of the Keenetic router from enpa
Registering the MAC address of the host in the Home segment using the console from enpa
Adding the MAC address of the Wi-Fi client device to the white or black list. When will the setting return to WebUI?
Setting up selective routing via imageMaster TOR
Anonymous access requests username / password via SMB \ CIFS protocol
Configuring access to the web interface via the Guest network from enpa
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
4K and KN-1010 bedrocker tuning and testing recommendation
How to make friends with a device with GPON Rostelecom via SFP connector
Installing and configuring the smstools3 package on the Keenetic Giga (KN-1010) router for sending SMS

TTL lock

How to fix TTL
YOTA restrictions bypass
Management of TTL value for incoming (from provider) and outgoing (to provider) packets

Keenetic Recovery

Example of restoring service code (servicetag) from olegk1
Example of restoring service code (servicetag) from LuckyNeo
An example of recovery through the unsoldered connector of the router console from Must_Die
Example of firmware recovery with the replacement of the firmware file from Leonid28
Detailed instructions for restoring environment variables in ZyXEL Keenetic series Internet centers and new Keenetic series from _Danila_Master_

Instructions

Keenetic Support Center (articles, instructions)

Internet connection setup:

• NetFriend Initial Setup Wizard
  
• Ways to connect to the Internet
  
• Ethernet connection to the Internet
  
• Internet connection via optics (SFP module)
  
• PPPoE Internet connection
  
• Connect to the Internet via PPTP or L2TP
  
• Connecting to the Internet via a 3G / 4G modem
  
• Connect to the Internet via ADSL
  
• Connect to the Internet via VDSL
  
• Configure a VDSL connection between two Internet centers
  
• Connecting to a Wi-Fi network (Wireless ISP)
  
• Other connections
  
• Connection Priorities
  
• Connecting home network devices
  
• Web Configurator (control panel)
  
• Instructions for the initial setup of Internet centers through the Quick Setup Wizard (for NDMS versions 2.11 and earlier)
  
• Self-configuring Keenetic to connect to the Internet via an Ethernet cable (for NDMS versions 2.11 and earlier)
  
• Internet Center and GPON-modem sharing options
  
• MTU value setting
  
• Configuring the network adapter MAC address cloning (for NDMS versions 2.11 and earlier)
  
• WAN MAC address change

Install and configure KeeneticOS:

• System monitor
  
• Host traffic monitor
  
• Network accelerator
  
• Windows network (file and printer access)
  
• Online Center Software Update
  
• Automatic update of the operating system
  
• Beta Software Update
  
• Installing and updating firmware by downloading the system file
  
• Saving startup-config configuration file
  
• Saving self-test system file
  
• Change the mode of operation and assignment of network connectors
  
• Purpose of buttons and indicators of the Internet center
  
• Indicator Management
  
• Users and access (how to change the administrator password)
  
• Description of the components of the Internet Center firmware
  
• Installing and upgrading NDMS versions by downloading a file (for NDMS versions 2.11 and earlier)
  
• Configuration files (system files)
  
• Updating the components of the Internet center through the mobile application My.Keenetic
  
• Installation of NDMS operating system components via a web interface (for NDMS versions 2.11 and earlier)
  
• Setting up Internet center user accounts
  
• Internet center light indicators control (for NDMS versions 2.11 and earlier)
  
• Why is Keenetic Internet Center unavailable at my.keenetic.net web address, but only at IP address?
  
• How to assign functions to the buttons that are located on the Keenetic case (for NDMS versions 2.11 and earlier)
  
• Variants of the DHCP server on the interfaces of the Internet center
  
• Option "Install updates automatically" (for NDMS versions 2.11 and earlier)

Reset:

• Resetting the Internet center and administrator password
  
• Resetting the Internet center and administrator password (using the Reset button)

Diagnostics:

• Diagnostics
  
• Collecting logs from the Keenetic system log when the device is unavailable (hang)
  
• Perform diagnostics (debugging) to resolve configuration issues or troubleshoot (for NDMS versions 2.11 and earlier)
  
• Saving configuration file, system log and diagnostic file (for NDMS versions 2.11 and earlier)
  
• Configure SNMP server
  
• Saving the log of system messages (logs) on the Syslog server
  
• Diagnostics of client and DHCP server operation
  
• Capture network packets using Wireshark
  
• Using the built-in network packet capture module (for NDMS versions 2.11 and earlier)
  
• How to find out port numbers for some services displayed on the Connections tab in the System Monitor?
  
• Setting speed / duplex parameters on the Ethernet port (for NDMS versions 2.11 and earlier)
  
• When do I need to collect network packet dumps from a computer or a router port?
  
• The ability to use one of the LAN ports as a WAN port in Keenetic Giga III / Ultra II

Recovery firmware:

• How to restore the operating system of the Internet center?
  
• KeeneticOS recovery method (for advanced users)

Reservation

• Connect to multiple providers and reserve online channel
  
• Setting up Internet reservations via 3G / 4G-modem
  
• Internet Accessibility Checker - Ping Check (for NDMS versions 2.11 and earlier)
  
• Simultaneous connection to two providers and reservation of the Internet channel (for NDMS versions 2.11 and earlier)

Speed ​​Limit:

• Speed ​​limit for home network devicesGuest Wi-Fi network
  
• Setting a speed limit for a home network device (for NDMS versions 2.11 and earlier)
  
• Connection speed limit for Guest Wireless devices (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Remote access:

• Domain Name Service KeenDNS
  
• An example of remote access to home network resources via KeenDNS
  
• Access to the Internet center via KeenDNS over HTTPS
  
• How to provide remote access to Keenetic Internet Center for technical support?
  
• Remote access via SSH to the Keenetic command line
  
• What is the difference between the "white" and "gray" IP-address?Using KeenDNS remote access service (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via KeenDNS using domain names 4th level (for NDMS versions 2.11 and earlier)
  
• Setting up remote access to the Internet center from the Internet
  
• Remote access from the Internet to a home network computer connected via Keenetic (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode
  
• An example of remote access to home network resources via the KeenDNS service (using classic NAT rules)
  
• Wake device over network (Wake-on-LAN)
  
• Transfer the domain name KeenDNS to another Internet center

VLAN:

• Sharing tagged and untagged traffic on the WAN port of the Internet centerConfiguring simultaneous operation with tagged and untagged traffic
  
• Organization of several local networks with different main gateways
  
• Creation of several independent subnets on the local area network's Internet using VLAN
  
• Internet reservations between two Internet centers

Forwarding and port configuration:

• Port Forwarding
  
• Forwarding all ports to a local network host (organization of a DMZ host)
  
• Using Xbox and PS4 when connected via Keenetic
  
• Syntax and description of the ip static command to configure NAT network address translation
  
• What to do if port forwarding does not work?
  
• What to do if port forwarding does not work? (for NDMS versions 2.11 and earlier)
  
• When should you use port forwarding and firewall rules?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• Configuring port forwarding through a backup connection
  
• Configuring port forwarding in the Internet center (for NDMS versions 2.11 and earlier)
  
• Setting port forwarding in Keenetic to work correctly with the ВµTorrent program
  
• Configure forwarding of all ports to one computer in a local network (for NDMS versions 2.11 and earlier)
  
• How to replace the port number of the Internet center?
  
• Change of standard ports of control of the Internet center
  
• UPnP service

Wi-Fi setup:

• Wi-Fi seamless roaming
  
• Captive portal
  
• Connect to a Wi-Fi network
  
• How to change the name and password of the Wi-Fi network?
  
• 2.4 GHz wireless Wi-Fi network
  
• Wi-Fi 5 GHz Wireless Network
  
• General recommendations for the placement in the apartment of an Internet center with Wi-Fi interface for stable and high-quality wireless network
  
• What affects the operation of wireless networks, Wi-Fi? What could be a source of interference and what are their possible causes?
  
• Keenetic Wireless Power Level Indicator Scale
  
• Wireless connection to the Internet center from Windows 10
  
• Mobile device does not see the Wi-Fi network 5 GHz?
  
• Wi-Fi signal attenuation coefficients when passing through various environments
  
• Why is the Wi-Fi connection speed lower than stated?
  
• MAC address of the access point (BSSID) to connect
  
• Print a QR code to connect to a Wi-Fi network
  
• Wi-Fi network management with a button on the case
  
• Same network name (SSID) in the 2.4 / 5 GHz band
  
• The "Hide SSID" option in the access point settings
  
• Do I need to register an Internet center in Roskomnadzor?
  
• Guest Wi-Fi network
  
• Setting up a Wi-Fi guest wireless network (for NDMS versions 2.11 and earlier)
  
• Setting up an Internet center in WISP mode to work with an upstream access point or a Wi-Fi provider (for NDMS versions 2.11 and earlier)
  
• Selecting a wireless channel for the access point to work
  
• Real connection speed used in Wi-Fi technology
  
• How to scan a Wi-Fi network and determine the most free channel?
  
• How to set the direction of antennas on the Internet center of the Keenetic series?
  
• No internet access from the guest Wi-Fi network
  
• Create additional Wi-Fi access points
  
• What affects the change in the signal power parameter in the settings of the access point?
  
• Basic provisions of the IEEE 802.11ac standard
  
• Basic provisions of the IEEE 802.11n standard
  
• Setting the width of the wireless channel 20/40 MHz
  
• Ways to increase connection speed, bandwidth and stability of a wireless Wi-Fi network
  
• Possible malfunctions of the Wi-Fi network after connecting a USB 3.0 device to the Internet center
  
• Band steering
  
• Beamforming technology
  
• How the Band Steering mechanism works and why include it (for NDMS versions 2.11 and earlier)
  
• Differences in the 2.4 GHz and 5 GHz frequency bands

WPS (Wi-Fi Protected Setup):

• Connect to a Wi-Fi network using the WPS standard
  
• Quick WPS configuration (for NDMS versions 2.11 and earlier)
  
• Setting up a connection to the Internet center via Wi-Fi from a mobile device running Android OS using the WPS function

Security and DNS:

• How is the firewall implemented?
  
• Firewall
  
• Configuring Firewall Rules from the Command Interface
  
• Copy, move and delete multiple firewall rules
  
• The brute force protection feature for accessing the Internet Center
  
• Denying access to the web configurator from the guest network
  
• AdGuard DNS Internet Filter
  
• Internet filter Yandex.DNS
  
• Internet filter SkyDNS
  
• Home network protection and content filtering using the Yandex.DNS service (for NDMS versions 2.11 and earlier)
  
• Protect your home network and filter content using SkyDNS (for NDMS versions 2.11 and earlier)
  
• DDNS Domain Name
  
• Setting up and using the dynamic DNS service from No-IP
  
• Dynamic DNS Service Setup - DNS Master
  
• Using a firewall to provide different access rights to the Internet
  
• Examples of using firewall rules
  
• Examples of using firewall rules (for NDMS versions 2.11 and earlier)
  
• Internet access control feature on home network devices page
  
• How in the Internet center to block access to the Internet on port 80 (HTTP) to all users, except one, with the specified IP address?
  
• How to block access to a specific site?
  
• Configuring the Internet Center to block the access of the home network to a specific web resource (for NDMS versions 2.11 and earlier)
  
• How to block access to your own Internet center resources (web, cli, cifs, ftp, transmission) from the Guest Wireless Network?
  
• Configure Internet Center firewall rules that use a range of IP addresses or ports
  
• Examples of Internet center firewall rules that use port ranges
  
• When should you use port forwarding and firewall rules?
  
• Wi-Fi access control
  
• MAC access control for Wi-Fi wireless network (for NDMS versions 2.11 and earlier)
  
• In what order are the firewall rules executed?
  
• Using public DNS servers in the Internet center
  
• Firewall Description (for NDMS 2.11 and earlier)
  
• WPA2 KRACK vulnerability protection

schedule:

• Connection schedule
  
• Schedule home network devices
  
• Setting up schedules in the Internet center (for NDMS versions 2.11 and earlier)
  
• Parental Control: Disconnecting the Internet on a Schedule (for NDMS versions 2.11 and earlier)
  
• Disable all indicators on schedule
  
• Internet center reboot on schedule
  
• Schedule of firewall and port forwarding rules

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

• All about IPIP, GRE and EoIP tunnels (starting with firmware v2.08)
  
• Tuning IPIP, GRE and EoIP tunnels
  
• Setting up an IPSec VPN tunnel between the Internet hub and a Windows computer
  
• IPSec VPN client / server
  
• IPSec VPN tunnel organization between two Keenetic Internet Centers (for NDMS versions 2.11 and earlier)
  
• An example of creating IPSec connections using Windows operating system
  
• Connect Windows to IPsec Virtual-IP via Shrew VPN Client
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a mobile device with Android OS
  
• Setting up an IPSec VPN tunnel (IPSec Virtual IP) between Keenetic and a mobile device with iOS
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a Windows computer
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a computer with Mac OS
  
• Combining two local area networks with gray IP addresses using Keenetic via vpnki
  
• PPTP VPN server
  
• Setting up a PPTP VPN server in Keenetic (for NDMS versions 2.11 and earlier)
  
• Creating a PPTP Connection in Windows OS to the Internet Center VPN Server
  
• Static IP address for user when connecting to Keenetic PPTP server
  
• Connection to the PPTP server of the Internet center for several users under one account
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Network Routing through VPN
  
• Connect two local networks using Keenetic Internet Centers using PPTP Server (for NDMS versions 2.11 and earlier)
  
• Connect to the VPN server of the Internet center to access a remote local network and to gain access to the Internet
  
• Features of connecting to the PPTP server of the Internet center from Windows
  
• Is it possible to connect more than two home networks with the help of Internet centers using PPTP Server?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• OpenVPN Client
  
• OpenVPN server
  
• Local area networking via OpenVPN
  
• An example of setting up access between local networks of Keenetic Internet Centers using the OpenVPN server located in the cloud hosting
  
• Is it possible to create an OpenVPN server like TAP?
  
• Using the OpenVPN client (for NDMS versions 2.11 and earlier)
  
• OpenVPN server on Keenetic (for NDMS versions 2.11 and earlier)
  
• Connecting via SSTP from Windows
  
• SSTP connection from Android
  
• SSTP VPN server
  
• L2TP / IPsec Client (L2TP over IPsec)
  
• Connecting to the integrated L2TP / IPSec VPN server from a device on iOS and Windows
  
• L2TP / IPsec connection example in Windows 7
  
• VPN server L2TP / IPsec
  
• Configuring Windows Firewall for connections from the network behind a Keenetic VPN server

File server and USB-drives:

• USB folder access control
  
• Setting access rights to a network drive connected to the Internet center (for NDMS versions 2.11 and earlier)
  
• The computer does not see an external hard drive connected to the Internet center
  
• Work via a web interface with files on a USB drive connected to the Internet center
  
• How to create a network drive in Windows to access data from a USB drive connected to the Internet center?
  
• Backup System Support Time Machine
  
• Backup System Support Time Machine (for NDMS versions 2.11 and earlier)
  
• USB drive connection
  
• Connecting a USB drive to the Internet center (for NDMS versions 2.11 and earlier)
  
• Using the EXT4 file system on USB drives
  
• Using the EXT3 file system on USB drives
  
• Connecting to a multi-partitioned hard disk center
  
• After what time does the hard drive connected to Keenetic go into power saving mode (sleep mode) if there are no accesses to it?
  
• What should I do if the Internet center does not "see" the USB drive connected to it?
  
• Using the zRam paging file
  
• How to prepare a USB-drive for use as storage and at the same time expanding the amount of RAM in the Internet center?

FTP server:

• FTP server
  
• Setting up an Internet center for organizing an FTP server with access from the Internet (for NDMS versions 2.11 and earlier)

BitTorrent Transmission Client:

• Torrent client
  
• Transmission Torrent Client Interface
  
• Restoring Transmission torrent client settings
  
• Work with the torrent client Transmission (for versions of NDMS v2.05 - v2.07)
  
• There is no download via the built-in torrent client Transmission
  
• Access to the BitTorrent client management of the Internet Center Transmission (for NDMS versions 2.11 and earlier)
  
• Manage your Transmission torrent client via the My.Keenetic mobile app
  
• How can I download a torrent to a second USB-drive in the Internet center using the built-in torrent client?
  
• Solving the problem with downloading torrents from the built-in BitTorrent client Transmission when connected via a 3G / 4G modem
  
• Working with the Transmission torrent client (for NDMS versions 2.08 - 2.11)
  
• Using the Transmission Remote GUI program to remotely manage the integrated BitTorrent client of the Internet center
  
• Access to the Transmission web interface via KeenDNS cloud

DLNA:

• DLNA Media Library
  
• Sort files on the DLNA server
  
• Using the DLNA server (for NDMS versions 2.11 and earlier)
  
• Watching video through DLNA server (for NDMS version 2.11 and earlier)
  
• Setting up a DLNA server to hang media content from two USB-drives or several directories from one media

Digital television:

• Setting up an IPTV connection (IPTV)
  
• Setting up Keenetic Internet Center for watching digital television (IPTV) (for NDMS versions 2.11 and earlier)
  
• UDP proxy
  
• Setting up IPTV viewing using the UDP Proxy function (UDP-HTTP proxy) (for NDMS versions 2.11 and earlier)
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Setting up Keenetic DSL Internet Center for IPTV
  
• The option of using the Internet center to watch IPTV, which comes to the GPON-modem
  
• Setting up an IPTV from Rostelecom when connected to the Internet via Ethernet
  
• Setting up simultaneous access to the Internet and IPTV service through two different providers
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)

USB printer:

• List of supported printers
  
• Printer connection
  
• Connecting a USB printer to the Internet center (for NDMS versions 2.11 and earlier)
  
• Remote access to a printer connected to the Internet center
  
• Connecting the printer in Direct mode (Direct)
  
• Connect a USB printer using JetDirect to an Internet center (for NDMS versions 2.11 and earlier)
  
• Setting up printing from an Android-based mobile device through a printer connected to the Internet center
  
• Remote access to a printer connected to the Internet center
  
• Does not print a USB printer connected to the internet center. Diagnostics and guide to action.

CLI (command line), SSH:

• Internet Center Command Line Interface (CLI)
  
• Terminal program for Windows
  
• Enabling Telnet and TFTP services in Windows
  
• Connect to the command line interface (CLI) of the Internet Center from Mac OS

Modes:

• Additional modes of operation
  
• Access Point Mode
  
• Amplifier Mode
  
• Adapter Mode
  
• Expansion of Wi-Fi network coverage in "Amplifier" mode (for NDMS versions 2.11 and earlier)
  
• How to configure the wireless bridge mode in the Internet center? (for NDMS versions 2.04)
  
• Access to the Keenetic web configurator when it works in one of the additional modes
  
• Ability to access the web configurator when Keenetic Lite III is in Access Point mode (for NDMS versions 2.11 and earlier)
  
• Internet center in the mode of a normal wireless access point (for NDMS version 2.04)
  
• Update NDMS OS when the Internet center is operating in the mode of a normal wireless access point
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode

3G / 4G modems:

• List of supported USB modems
  
• APN parameter setting for USB modem
  
• How to add a new USB-modem, which is not in the list of supported?
  
• Update NDMS components of the Internet center via a 3G / 4G modem, added only in the beta version, which is not on the site
  
• Access to USB modem web interface via KeenDNS service

Digital telephony:

• Digital telephony
  
• Telephone Station Keenetic Plus DECT (for NDMS versions 2.11 and earlier)
  
• DECT base station
  
• DECT tube setup
  
• Telephone lines
  
• Using the Keenetic Plus DECT module to implement a DECT cordless telephone station
  
• Which DECT handsets can be used with the Keenetic Plus DECT telephone exchange?
  
• SIP telephone line setup
  
• Call Log

OPKG packages:

• OPKG
  
• Installing external Opkg-packages (for NDMS versions 2.11 and earlier)
  
• Installing and configuring the OPKG package rTorrent
  
• Installing and configuring the OPKG package ntfs-3g-utils to check the USB-drive
  
• Installing and configuring OPKG-package e2fsprogs to check the USB-drive with file system EXT2 / 3/4
  
• Installing IP PBX Asterisk 11 on the Internet center Keenetic
  
• Installing and configuring the OPKG exfat-fuse package to support the exFAT file system

IntelliQoS:

• IntelliQoS service
  
• Description of the setting and operation of the IntelliQoS function (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Internet speed testing

http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.

Application to manage the router

My.Keenetic (iOS) - provides management of basic settings and built-in services of Keenetic Internet Centers

My.Keenetic (Android) - provides management of basic settings and built-in services of Keenetic Internet Centers

Keenetic (Android) - beta version of the new application for managing routers Keenetic

Transmission Management Application

Transmission Remote (Android OS) - Client for remote control of the torrent client Transmission

Firmware

Table of current versions of KeeneticOS

Information about releases of KeeneticOS (Announcements of new versions of the embedded operating system with a list of changes)

The official version of KeeneticOS

KeeneticOS out of the box

Keenetic Giga_KN-1010_2.10.B.1.0-2.bin.zip(10.39 MB)

2.10

Stable firmware version 2.10.C.2.0-0 from 12/31/2017 for Giga KN-1010

2.11

The official beta firmware version 2.11.B.1.0-0 dated 02.22.2018 for Giga KN-1010

Stable firmware version 2.11.C.0.0-1 from 03/03/2018 for Giga KN-1010

Stable version of the firmware 2.11.C.1.0-2 from 04/06/2018 for KN-1010

Stable version of the firmware 2.11.C.1.0-3 from 04/12/2018 for KN-1010

2.12

The official beta firmware version 2.12.B.0.0-0 dated 05.23.2018 for KN-1010

The official beta firmware version 2.12.B.0.0-2 dated 05.31.2018 for KN-1010

Stable version of the firmware 2.12.C.0.0-1 from 07/09/2018 for KN-1010

Stable firmware version 2.12.C.1.0-3 from 08.08.2018 for KN-1010

2.13

The official beta firmware version 2.13.B.0.0-0 of 08/30/2018 for KN-1010

The official beta firmware version 2.13.B.0.0-2 of 09/07/2018 for KN-1010

The official beta firmware version 2.13.B.1.0-1 of 09/17/2018 for KN-1010

Stable firmware version 2.13.C.0.0-0 dated 09/20/2018 for KN-1010

Stable version of firmware 2.13.C.0.0-1 dated 10/02/2018 for KN-1010

Stable firmware version 2.13.C.0.0-3 from 10/17/2018 for KN-1010

2.14

The official beta firmware version 2.14.B.0.0-1 from 11/08/2018 for KN-1010

Stable version of the firmware 2.14.C.0.0-0 from 12/03/2018 for KN-1010

Stable firmware version 2.14.C.0.0-3 from 12/24/2018 for KN-1010

Stable firmware version 2.14.C.0.0-4 from 12/26/2018 for KN-1010

2.15

The official beta version of the firmware 2.15.B.0.0-1 from 02/11/2019 for KN-1010

Stable version of the firmware 2.15.C.0.0-0 from 02/28/2019 for KN-1010

Stable version of KeeneticOS 2.15.C.3.0-0 from 04/01/2019 for KN-1010

Stable version of KeeneticOS 2.15.C.4.0-1 from 05/16/2019 for KN-1010

Debug version of KeeneticOS

Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

• Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  
• Changelog of debug versions of KeeneticOS -here.
  
• Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.

The program for recovering firmware Keenetic Giga KN-1010.

Keenetic Giga_KN-1010-Recovery.zip(12.58 MB)

KeeneticOS firmware catalog

• Keenetic firmware store on cloud.mail from enpa
  
• Keenetic firmware repository on yenpa.disk from enpa
  
• File storage from ndmsystems

The curator of the topic is enpa

Post has been editedenpa - 25.05.19, 21:15

Reason for editing: Stable version of KeeneticOS 2.15.C.4.0-1 from 05/16/2019 for KN-1010 | Reference CLI command interface KN-1010 from 05.24.2019

[VladimirVV84]

s0real,
If my memory serves me in Win10, I need to enable smb1. In the cap was an instruction on this topic!

[VladAsta]

s0real,

http://winitpro.ru/index.php/2018/01/24/ne-otkryvayutsya-smb-papki-posle-ustanovki-windows-10-1709/

[s0real]

VladAsta, VladimirVV84
Thanks, but it didn't help.
And there are no problems with the lack of access to the disk itself - I can see it through the explorer, I can go to it, move through folders, but I cannot change the contents of the disk. The last build of win10 1809 was from November - and everything worked on it. Now it is, accordingly, the same 1809 ..

Upd.I connected the HDD as a network drive in OS, through it everything works correctly.
But why access is limited if you go through the "Network location" =>"Keenetic Giga" - is unclear ...

Post has been editeds0real - 19.03.19, 16:06

[_mad_]

s0real,
Try to make access not anonymous, but for example for the admin of the router - will it work like that?

[Zhzhzhzh18]

s0real,
Local Computer Policy \ Computer Configuration \ Administrative Templates \ Network \ Lanman Workstation \
Enable Unsafe Guest Inputs - Enabled Status

[send_1111]

Prosvyatite people, which means in the system log

kernel: fastvpn: bind table cleared

very often repeated. Up to
Core :: Syslog: last message repeated 9 times.

[user_23]

plander_kozzeron, installed rtorrent for this instructionhttps: //help.keenetic .../articles/360000264829

Everything went fine.

Post has been editeduser_23 - 19.03.19, 21:07

[Sibiryak_mt]

Friends, I raised the openvpn server, (not through OPKG) I cling to the android. I connect, everything is clear - and the traffic does not go to the tunnel, something has already been worn out. No one came across?

[mosdim]

Mitki @ 03.20.19, 13:20

Who has the tariff of 100 Mbit / s and gadgets from Apple iPhone and Mac, what speeds

The tariff is 300 Mbit (peak hours), so the speed is usually higher
Macbook pro 2013 gives out 200 with a small Mbit on speedtest, but it has wi-fi N in 5 GHz
Well, on an iPhone like this:

Connection speed with iPhones (7, 7+) in the web interface, if you are near, 866 MBits writes

Post has been editedenpa - 22.03.19, 07:01

[Varom]

[email protected], 21:14

"/opt/etc/init.d/rc.unslung"

This line in the settings itself will appear after the successful installation of entware, you do not need to register it before.

Posted 03/20/2019 5:30 PM:

[email protected], 21:29

flash drive and partition on the hard disk

no matter what the carrier.

[ebsysert1983]

plander_kozzeron,
After the file was dropped into the install folder, did the router restart? Check that the install folder contains Cyrillic and is in the root of the disk.
Try to download the installation file, suddenly it is broken.
If nothing helps, go to my link, there the guys on this dog have eaten, help you figure it out.
P.S. partition of the hard disk in which program formatted? Is it normal in kinetics?
I myself did this:
I formatted the partition using the paragon partition manager, connected the disk to the kinetics through the docking station, made sure that the partition is visible, created the install folder in the root of the disk and copied the installation file into it. I rebooted the router, made sure that there were entries in the log about the successful installation.

Post has been editedebsysert1983 - 20.03.19, 17:51

[Varom]

[email protected], 21:55

we select the necessary section and we register the script,

No need to prescribe the script at the time of installation! This line itself will appear after a successful installation.

Posted 03/20/2019 6:10 PM:

plander_kozzeron @ 03/20/19, 10:05

console as in the instructions and through gparted, etc.

Try fs ext3 type.

[valeramalko]

Vartom @ 03/20/19 20:09

No need to prescribe the script at the time of installation!

The instructions for the keenetic database indicate what you need:

plander_kozzeron @ 03/20/19, 20:05

via gparted

What about gpartedformatting note
You can go online to this disk partition and see if there is an install folder and what's in there, and show a screenshot.

Post has been editedvaleramalko - 20.03.19, 18:20

[Varom]

valeramalko @ 03/20/19, 10:11

The instructions for the keenetic database indicate what you need:

I used this instruction and do not need it.
https://forum.keenetic.net/topic/4299-entware/plus if after reviewing the installation process, the script for installation appears in this script (line).

Post has been editedVarom - 20.03.19, 18:21

[festo_s]

alexius133,
and rTorrent will give? I would have found it myself, but today I was busy all day, I could not format the flash drive into the necessary system

[alexius133]

festo_s, for information
Keenetic Giga (KN-1010) - Discussion (Post enpa # 82549356)
And here is at the expense of speeds
https: //help.keenetic .../articles/360000851899

Post has been editedalexius133 - 20.03.19, 22:41

[alexius133]

enpa, How can I download a torrent to a second USB-drive in the Internet center using the built-in torrent client?

Attention! This instruction is relevant only for Keenetic Internet Centers with NDMS version 2.07 and below. Starting with version 2.08, the integrated Torrent client Transmission has been updated, in which there is no possibility to add a new task for downloading a torrent to the second USB-drive.

I understand that this is not easy to get around? And the easiest - after downloading the torrent, physically move the file to another disk yourself.

Post has been editedalexius133 - 20.03.19, 22:47

[balian007]

Ssersh @ 03/21/19 12:11

On openvpn works fine. Only there is not enough speed to view in better quality.

What exactly and what speeds are we talking about.

For reference, somehow tried the tunnels

(iperf3 -c) PC --- LAN ---- ExtraII ----- EoIP / Ipsec ----- KN1810 (iperf3 -s)

35Mbps speed

(iperf3 -s) KN1010 ----- EoIP / Ipsec ----- KN1810 (iperf3 -c)

...
[ID] Interval Transfer Bitrate Retr Cwnd
[5] 0.00-1.00 sec 10.0 MBytes 83.9 Mbits / sec 0 502 KBytes
[5] 1.00-2.00 sec 9.87 MBytes 82.9 Mbits / sec 0 1.03 MBytes
[5] 2.00-3.00 sec 10.2 MBytes 85.3 Mbits / sec 0 1.04 MBytes
[5] 3.00-4.00 sec 8.93 MBytes 74.8 Mbits / sec 0 1.04 MBytes
[5] 4.00-5.00 sec 8.74 MBytes 73.4 Mbits / sec 0 1.04 MBytes
[5] 5.00-6.00 sec 9.62 MBytes 80.8 Mbits / sec 0 1.04 MBytes
[5] 6.00-7.00 sec 9.49 MBytes 79.6 Mbits / sec 0 1.04 MBytes
[5] 7.00-8.00 sec 10.3 MBytes 86.4 Mbits / sec 0 1.04 MBytes
[5] 8.00-9.00 sec 9.74 MBytes 81.8 Mbits / sec 0 1.04 MBytes
[5] 9.00-10.00 sec 9.87 MBytes 82.8 Mbits / sec 0 1.04 MBytes
[5] 10.00-11.00 sec 10.2 MBytes 85.9 Mbits / sec 0 1.04 MBytes
[5] 11.00-12.00 sec 9.87 MBytes 82.7 Mbits / sec 0 1.04 MBytes
[5] 12.00-13.00 sec 10.2 MBytes 85.9 Mbits / sec 0 1.04 MBytes
[5] 13.00-14.00 sec 9.49 MBytes 79.5 Mbits / sec 0 1.04 MBytes
[5] 14.00-15.00 sec 9.24 MBytes 77.7 Mbits / sec 0 1.04 MBytes
[5] 15.00-16.01 sec 10.2 MBytes 85.3 Mbits / sec 0 1.04 MBytes
[5] 16.01-17.00 sec 9.74 MBytes 82.3 Mbits / sec 0 1.04 MBytes
[5] 17.00-18.00 sec 10.1 MBytes 84.8 Mbits / sec 0 1.04 MBytes
[5] 18.00-19.00 sec 10.2 MBytes 86.0 Mbits / sec 0 1.04 MBytes
[5] 19.00-20.00 sec 8.99 MBytes 75.4 Mbits / sec 0 1.04 MBytes
[5] 20.00-21.00 sec 8.80 MBytes 73.9 Mbits / sec 0 1.04 MBytes
[5] 21.00-22.00 sec 10.1 MBytes 84.3 Mbits / sec 0 1.04 MBytes
[5] 22.00-23.00 sec 8.99 MBytes 75.5 Mbits / sec 0 1.04 MBytes
[5] 23.00-24.00 sec 10.6 MBytes 89.0 Mbits / sec 0 1.04 MBytes
[5] 24.00-25.00 sec 9.55 MBytes 80.1 Mbits / sec 0 1.04 MBytes
[5] 25.00-26.00 sec 10.5 MBytes 88.0 Mbits / sec 0 1.04 MBytes
[5] 26.00-27.00 sec 8.99 MBytes 75.4 Mbits / sec 0 1.04 MBytes
[5] 27.00-28.00 sec 9.74 MBytes 81.7 Mbits / sec 0 1.04 MBytes
[5] 28.00-29.00 sec 9.43 MBytes 79.1 Mbits / sec 0 1.04 MBytes
[5] 29.00-30.00 sec. 8.99 MBytes 75.4 Mbits / sec 0 1.04 MBytes
[5] 30.00-31.00 sec 8.93 MBytes 74.9 Mbits / sec 0 1.04 MBytes
[5] 31.00-32.00 sec 9.12 MBytes 76.5 Mbits / sec 0 1.04 MBytes
[5] 31.00-32.00 sec 9.12 MBytes 76.5 Mbits / sec 0 1.04 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ID] Interval Transfer Bitrate Retr
[5] 0.00-32.00 sec 317 MBytes 83.1 Mbits / sec 0 sender
[5] 0.00-32.00 sec 0.00 Bytes 0.00 bits / sec receiver
iperf3: error - the server has terminated

80Mbps speed

(iperf3 -c) PC ----- LAN ------ KN1810 ----- EoIP / Ipsec ----- KN1010 (iperf3 -s)

...
[ID] Interval Transfer Bitrate
[5] 0.00-1.00 sec 10.8 MBytes 90.3 Mbits / sec
[5] 1.00-2.00 sec 11.0 MBytes 92.4 Mbits / sec
[5] 2.00-3.00 sec 11.0 MBytes 91.9 Mbits / sec
[5] 3.00-4.00 sec 11.0 MBytes 92.4 Mbits / sec
[5] 4.00-5.00 sec 11.4 MBytes 95.5 Mbits / sec
[5] 5.00-6.00 sec 11.3 MBytes 95.0 Mbits / sec
[5] 6.00-7.00 sec 11.0 MBytes 91.9 Mbits / sec
[5] 7.00-8.00 sec 10.9 MBytes 91.1 Mbits / sec
[5] 8.00-9.00 sec 10.7 MBytes 90.0 Mbits / sec
[5] 9.00-10.00 sec 11.0 MBytes 91.9 Mbits / sec
[5] 10.00-11.00 sec 11.0 MBytes 92.4 Mbits / sec
[5] 11.00-12.00 sec 11.3 MBytes 94.4 Mbits / sec
[5] 12.00-13.00 sec 11.3 MBytes 94.4 Mbits / sec
[5] 13.00-14.00 sec 11.1 MBytes 93.4 Mbits / sec
[5] 14.00-15.00 sec 11.1 MBytes 93.3 Mbits / sec
[5] 15.00-16.00 sec 11.0 MBytes 92.4 Mbits / sec
[5] 16.00-17.00 sec 10.9 MBytes 91.4 Mbits / sec
[5] 17.00-18.00 sec 11.1 MBytes 93.6 Mbits / sec
[5] 18.00-19.00 sec 10.6 MBytes 89.1 Mbits / sec
[5] 19.00-20.00 sec 11.0 MBytes 92.3 Mbits / sec
[5] 20.00-21.00 sec 11.3 MBytes 95.1 Mbits / sec
[5] 21.00-22.00 sec 11.2 MBytes 94.4 Mbits / sec
[5] 22.00-23.00 sec 9.24 MBytes 77.4 Mbits / sec
[5] 23.00-24.00 sec 10.7 MBytes 89.5 Mbits / sec
[5] 24.00-25.00 sec 9.89 MBytes 83.0 Mbits / sec
[5] 25.00-26.00 sec 10.5 MBytes 87.7 Mbits / sec
[5] 26.00-27.00 sec 10.7 MBytes 89.4 Mbits / sec
[5] 27.00-28.00 sec 10.9 MBytes 91.2 Mbits / sec
[5] 28.00-29.00 sec 10.8 MBytes 90.7 Mbits / sec
[5] 29.00-30.00 sec 10.7 MBytes 89.4 Mbits / sec
[5] 30.00-31.00 sec 10.9 MBytes 91.2 Mbits / sec
[5] 31.00-32.00 sec 10.6 MBytes 89.5 Mbits / sec
[5] 32.00-33.00 sec 10.9 MBytes 91.6 Mbits / sec
^ C [5] 33.00-33.06 sec 756 KBytes 105 Mbits / sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ID] Interval Transfer Bitrate
[5] 0.00-33.06 sec 359 MBytes 91.2 Mbits / sec receiver
iperf3: interrupt - the server has terminated

(iperf3 -c ....- R) PC ----- LAN ------ KN1810 ----- EoIP / Ipsec ----- KN1010 (iperf3 -s)
[ID] Interval Transfer Bitrate Retr Cwnd
[5] 0.00-1.03 sec 22.8 MBytes 184 Mbits / sec 0 92.7 KBytes
[5] 1.03-2.00 sec 19.8 MBytes 172 Mbits / sec 0 94.1 KBytes
[5] 2.00-3.01 sec 20.4 MBytes 169 Mbits / sec 0 95.4 KBytes
[5] 3.01-4.14 sec 21.9 MBytes 163 Mbits / sec 0 95.4 KBytes
[5] 4.14-5.09 sec 17.0 MBytes 151 Mbits / sec 0 95.4 KBytes
[5] 5.09-6.12 sec 20.5 MBytes 167 Mbits / sec 0 95.4 KBytes
[5] 6.12-7.00 sec 19.5 MBytes 186 Mbits / sec 0 95.4 KBytes
[5] 7.00-8.00 sec 21.3 MBytes 178 Mbits / sec 0 95.4 KBytes
[5] 8.00-9.11 sec 20.4 MBytes 155 Mbits / sec 0 95.4 KBytes
[5] 9.11-10.09 sec 18.8 MBytes 159 Mbits / sec 0 95.4 KBytes
[5] 10.09-11.00 sec 20.3 MBytes 187 Mbits / sec 0 95.4 KBytes
[5] 11.00-12.00 sec 20.7 MBytes 173 Mbits / sec 0 95.4 KBytes
[5] 12.00-13.00 sec 20.3 MBytes 170 Mbits / sec 0 95.4 KBytes
[5] 13.00-14.00 sec 20.6 MBytes 173 Mbits / sec 0 95.4 KBytes
[5] 14.00-15.00 sec 21.7 MBytes 182 Mbits / sec 0 95.4 KBytes
[5] 15.00-16.00 sec 20.6 MBytes 172 Mbits / sec 0 95.4 KBytes
[5] 16.00-17.07 sec 20.4 MBytes 161 Mbits / sec 0 95.4 KBytes
[5] 07/17/18/09 sec 20.7 MBytes 170 Mbits / sec 0 95.4 KBytes
[5] 18.09-19.11 sec 20.0 MBytes 165 Mbits / sec 0 95.4 KBytes
[5] 19.11-20.00 sec 18.6 MBytes 175 Mbits / sec 0 95.4 KBytes
[5] 20.00-21.08 sec 20.9 MBytes 162 Mbits / sec 0 95.4 KBytes
[5] 08.21-22.09 sec 20.0 MBytes 165 Mbits / sec 0 95.4 KBytes
[5] 22.09-23.03 sec 19.5 MBytes 175 Mbits / sec 0 95.4 KBytes
[5] 23.03-24.00 sec 18.6 MBytes 161 Mbits / sec 0 95.4 KBytes
[5] 24.00-25.03 sec 21.4 MBytes 175 Mbits / sec 0 95.4 KBytes
[5] 25.03-26.00 sec 19.7 MBytes 170 Mbits / sec 0 95.4 KBytes
[5] 26.00-27.12 sec 20.3 MBytes 152 Mbits / sec 0 95.4 KBytes
[5] 12.27-28.01 sec 18.7 MBytes 175 Mbits / sec 0 95.4 KBytes
[5] 01.28-29.09 sec 18.9 MBytes 148 Mbits / sec 0 95.4 KBytes
[5] 29.09-30.09 sec 20.0 MBytes 167 Mbits / sec 0 95.4 KBytes
[5] 30.09-31.11 sec 20.4 MBytes 168 Mbits / sec 0 95.4 KBytes
...

client speed through the EoIP / Ipsec 90Mbps channel and when receiving -R 170Mbps

Post has been editedbalian007 - 21.03.19, 14:53

[kiabs]

People, explain to me stupid, where do the numbers of connection speed come from and what do they mean? Is it traffic to the Internet at the current time? If so, then what the hell, I turn off all devices, but the traffic is still there.

Post has been editedkiabs - 21.03.19, 23:51

[discodies]

Hello! The question is this. There is a Keenetic Giga KN-1010 from him a wire to the switch divorces lokalka. An access point is also inserted in the switch where employees are connected via Wifi. In the Home Network are that users of stationary computers, and users who connect to this access point. I try to prescribe certain rules through the firewall so that WIfi clients cannot get into the local network, so these rules do not work for some reason. What am I doing wrong, tell me!?

Post has been editeddiscodies - 22.03.19, 10:00