[X]Assistant

[Archi007]

Uhans A6 - Firmware
Uhans A6
Description | Discussion пїЅ | Firmware пїЅ

Important information:

• When describing the problem, specify the name of the firmware and its version. Also, if possible, specify the revision of the device.
  
• If you did not find the information of interest in the header, you can always use the search in the topic.

Drivers and utilities:

Drivers:

• ADB Driver Installer- universal ADB drivers for Android devices.

Utilities:

• MauiMETA- A program to restore IMEI and control the modem device.
  
• USBDeview- A program to manage the installed USB-drivers.
  
• SP Flash Tool- the program-flasher for smartphones based on MTK, as well as instructions, drivers and other utilities.
  
• Infinix Flash Tool- firmware utility.
  
• Partitions Backup & Restore- A program to create and restore backup section NVRAM.
  
• ADB (Android Debug Bridge)- a console application for Windows, which is used to debug Android devices.

Official firmware:

Android 6.0:

• Download• x32 / 3.18.19+ (v2.01) / SP Flash Tool
  

Android 7.0:

• Download• x32 / 3.18.35+ (v3.05) / SP Flash Tool
  
• Download• x32 / 3.18.35+ (v3.07) / SP Flash Tool
  
• Download• x32 / 3.18.35+ (v3.08) / SP Flash Tool
  

Informal firmware:

6.x:

• Resurrection Remix 5.7.4• x32 / 3.18.19 / TWRP • fromArchi007
  
• ValidusOS• x32 / 3.18.19 / TWRP • fromArchi007
  
• Android Open Kang Project• x32 / 3.18.19 / TWRP • fromArchi007
  
• MIUI 8.4• x32 / 3.18.19 / TWRP • fromArchi007
  
• MIUI 8.6• x32 / 3.18.19 / TWRP • fromArchi007
  
• Bliss Rom v6.4• x32 / 3.18.19 / TWRP • fromArchi007
  
• Homtom mod• x32 / 3.18.19 / TWRP • fromArchi007
  
• Lineage OS 13• x32 / 3.18.19 / TWRP • fromArchi007
  
• FlymeOS Release 6.7.12.22IR• x32 / 3.18.19 / TWRP • fromArchi007

Android 7.0:

• Cubot R9• x32 / 3.18.35 / TWRP • fromArchi007
  
• FreemeOS 7• x32 / 3.18.35 / TWRP • fromArchi007
  
• XOS 2.3• x32 / 3.18.35 / TWRP • fromArchi007
  
• RR5.8.5• x32 / 3.18.35 / TWRP • fromArchi007
  

Recovery:

• TWRP 3.1.1• x32 • fromjemmini
  

Miscellanea:

• Engineering Menu MTK Shortcut.
  
• An increase in the signal of sim-cards and wi-fi (as well as a trifle, which speeds up / optimizes the system).
  
• Modems with Asus Zenfone Go.
  
• Remove Gapps from firmware.
  
• Installing themes with MIUI Theme Editor.
  
• Dolby Atmos В® R6.5 Armor OS MOD (Multilingual)
  
• Saving Charge of Google Play Services
  
• Modem from Asus Zenfone Go for installation via TWRP
  
• Addition to the firmware RR5.8.5.
  

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedArchi007 - 17.09.18, 15:21

Reason for editing: Addition to firmware RR5.8.5.

[jemmini]

TWRP 3.1.1 пїЅпїЅпїЅ Uhans A6 download

- based on the firmware coreAndroid 6.0versions WF562K.YH2.UHANS.M0.H.SSAL8G5LBG6.B125.0406.V2.01 / 2017 04 жњ€ 06 ж�џжњџе›› 10:21:29 CST:recovery.img(10.91 MB)

- based on the firmware coreAndroid 7.0versions UHANS_A6_0627_V3.05 / Tue Jun 27 21:30:14 CST 2017:recovery.img(12.12 MB)

GettingROOT

To get ROOT install this patch from TWRP:SR1-SuperSU-v2.82-SR1-20170608224931.zip(5.99 MB)

Stock recovery

- from firmware WF562K.YH2.UHANS.M0.H.SSAL8G5LBG6.B125.0406.V2.01:recovery.img(8.5 MB)
- from firmware UHANS_A6_0627_V3.05:recovery.img(10.22 MB)

Attached files

MT6580_Android_scatter.zip(1.09 KB)
MT6580_Android_scatter_Android6.zip(1.11 KB)


Post has been editedjemmini - 24.08.17, 11:35

[Archi007]

For those who have a ROOT!
Increase the signal of sim-cards and wi-fi (as well as a trifle that speeds up / optimizes the system)

Instruction:

1. Go through any file ROOT manager (in my case - ROOT Explorer) to the system folder.
2. Open in the text editor file build.prop
3. Scroll to the bottom and, if it has not been previously edited, then there will be indentation after the last line, indent 2 and paste this text (Tweak's):

Tweak's

#TWEAKS
ro.ril.enable.amr.wideband = 1

dalvik.vm.dexopt-flags = m = v, o = y
#Bravia Engine Service
ro.service.swiqi.supported = true
persist.service.swiqi.enable = 1

ro.HOME_APP_ADJ = 1
windowsmgr.max_events_per_sec = 60
dalvik.vm.execution-mode = int: jit
persist.adb.notify = 0
ro.kernel.android.checkjni = 0
ro.ril.hsxpa = 2
ro.ril.gprsclass = 10
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.hsdpa.category = 10
ro.ril.enable.a53 = 1
ro.ril.enable.3g.prefix = 1
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
ro.ril.hsupa.category = 5
net.tcp.buffersize.default = 4096, 87380, 256960, 4096, 16384, 256960
net.tcp.buffersize.wifi = 4096, 87380, 256960, 4096, 16384, 256960
net.tcp.buffersize.umts = 4096, 87380, 256960, 4096, 16384, 256960
net.tcp.buffersize.gprs = 4096, 87380, 256960, 4096, 16384, 256960
net.tcp.buffersize.edge = 4096, 87380, 256960, 4096, 16384, 256960

persist.sys.ui.hw = 1
ro.max.fling_velocity = 12000
ro.min.fling_velocity = 8000
ro.kernel.checkjni = 0
ro.config.nocheckin = 1
ro.telephony.call_ring.delay = 0
ro.lge.proximity.delay = 25
mot.proximity.delay = 25

4. Press the "back" button and confirm the saving of changes (in a different way it does not save from 1 time).
5. If everything is done correctly, the file build.bak will appear, delete it (otherwise the system can restore everything to Tweak's, this is a backup) and restart the phone.

Conclusion

Personally, I have very “good” walls at home, thanks to which the signal of the Tele2 operator continually disappeared, didn’t notice this after Tweak’s application, didn’t test the Wi-Fi signal, Tweak's is my personal build, which roams from phone to phone, while I’m slowly added new Tweak's to this list.

Post has been editedArchi007 - 27.01.18, 00:32

Reason for editing: Amendment.

[Archi007]

: congratulate:The first port on the Uhans A6: congratulate:

RR 5.7.4 Uhans A6

Biography

Find a normal port helpedska-vovaembed Gapps and Magisk (non-system ROOT)andrey167Well, as well as the guys from the topic"Porting firmware to MTK6580 / MTK8321". Port was takenfrom here.

Bugs

If you find - write toqms

: tommy:All that is in the spoiler "Installation" is mandatory for reading and execution !!!

Installation

1. Install stock 6.0 if it is not worth it.
   
2. Make all wipe in TWRP except sd card.
   
3. Install by custom, Gapps and ROOT (in the form of a Magisk) are already embedded.
   
4. Wait for the installation, the phone will reboot itself.

The first download can take from 5 to 15 minutes.

ScreenshotsLots of ! CAUTION, TRAFFIC!

Download (I.D.)

https://yadi.sk/d/kQMZxp1l3Py38r

Post has been editedAkella_MC - 23.11.17, 21:29

Reason for editing: Clause 4.16 of the Resource Rules. In a hat

[Archi007]

Android Open Kang Project Uhans A6

Description:

• New CM port with many built-in settings.
  
• Themes work as they should, unlike the 1 port (I don’t know how to fix it).
  
• Built-in non-system ROOT (Magisk) =>Sberbank Online is not trimmed.
  
• GAPPS is also embedded.
  
• I built modems from 1 custom, communication and the Internet should catch as well, but this is relative to the region ...
  
• A source -Doogee x5 max.
  
• Pioneer -papaniy10.

Bugs:

LiveDisplay:

After the first power up, you need to turn off LiveDisplay along the path: Settings / Display / LiveDisplay, otherwise the system “thinks for a long time”} -).

Screenshot:

Wi-Fi hotspot:

The bug is that you cannot connect to the point, but if you turn on the Bluetooth-modem or simply Bluetooth, then the connection goes (after connecting Bluetooth you can turn off). Further, for a device that has already connected, you do not need to turn on Bluetooth, 2 and further times the connection will go without Bluetooth turned on.

Screenshot:

All that is in the spoiler "Installation" is mandatory for reading and execution !!!: stop_holywar:

Installation:

1. Install stock 6.0 if it is not worth it.
   
2. Make all wipe in TWRP except sd card.
   
3. Install by custom, Gapps and ROOT (in the form of a Magisk) are already embedded.
   
4. Wait for the installation, the phone will reboot itself.

The first download can take from 5 to 15 minutes.

Screenshots Lots of ! CAUTION, TRAFFIC!

Download (I. D,):

https://yadi.sk/d/Na3RtMSO3QMLuK

Post has been editedArchi007 - 07.12.17, 21:21

Reason for editing: In the header

[Archi007]

: girl_werewolf:Modems with Asus Zenfone Go: clapping:

Preface:

• Modems from the Asus Zenfone Go device under the kernel 3.18.19, android 6.0.
  
• According to the subjective opinion of some people - modems are good, 3G catches steadily.
  
• ROOT rights must be present on the device.
  
• Only you will vouch for the malfunction of your hands; perform a replacement at your own risk and withhold the responsibility from yourself.

Instruction:

1. Download the archive "system.rar".
   
2. We go through any ROOT-conductor to the root of the system (ROOT Explorer is convenient and familiar to me personally).
   
3. Go to system / etc and delete the firmware folder (this is in the system itself).
   
4. Now unzip the archive and go to the firmware folder (for convenience, made the same way as in the system, so as not to go back to the client if you are on the forum from the phone).
   
5. Well, we copy the firmware into the system / etc folder (before that, it’s better to delete it and not to throw it with a replacement, it's more reliable, even though the names of the files inside are identical).
   
6. Reboot the device and enjoy)

system.rar

system.rar(3.48 MB)

I made a post for those who prefer the stock, because the modems in it are disgusting, in my region for sure ...

Post has been editedAkella_MC - 07.12.17, 21:14

Reason for editing: In the header.

[Archi007]

MIUI 8.4 Uhans A6

Description:

• New port - MIUI 8.4.
  
• Built-in non-system ROOT (Magisk).
  
• GAPPS is also embedded.
  
• I built modems from 1 custom, communication and the Internet should catch as well, but this is relative to the region ...
  
• A source -Asus zenfone go.
  
• Pioneer -ska-vova.

Bugs:

• The network indicator in the blind says that there is no network signal, (the signal is OK).
  
• If your network indicator is no longer displayed. There is a useful program, Fix Signal, reloads the graphical interface.
  
• The second way, turn on and turn off the "Flight"
  
• The third way is to press the lock button 2 times (this will also restart the GUI).
  
• Incorrect display of RAM (2.5GB instead of 2).
  
• Miui has its own security, yes ROOT access, it provides nothing to do with system applications.
  
• MIUI does not see the headphones, the settings for the transition sound / vibration - the headset fly out.
  
• Headphones work, but at the same time with the speaker. This bug did not check.
  
• The Wi-Fi access point does not work, or rather you cannot connect in any way, the solution as on 2 custom does not work. Bug fake if there is a solution. Now it is not.

All that is in the spoiler "Installation" is mandatory for reading and execution !!!: flood:

Installation:

1. Install stock 6.0 if it is not worth it.
   
2. Make all wipe in TWRP except sd card.
   
3. Install by custom, Gapps and ROOT (in the form of a Magisk) are already embedded.
   
4. Wait for the installation, the phone will reboot itself.

The first download can take from 5 to 15 minutes.

Screenshots Lots of ! CAUTION, TRAFFIC!

Download (I. D,):

https://yadi.sk/d/0CnUDpn13QXATf

Post has been editedMgalex - 11.12.17, 21:30

Reason for editing: In the header

[Archi007]

PortedValidusOS, screenshots, etc. find it yourself (I don’t remember from which body I took it).
I didn’t bother with the post, as 2-3 people need my ports, only Magisk from the minuses, or rather I built it, but apk should be installed after installing the firmware separately.
Magisk take from this post:

Р’В® Magisk - The Universal Systemless Interface (Post Anais10 # 53515726)

Post has been editedAlexanderL - 17.12.17, 23:40

Reason for editing: In the header

[Archi007]

Bliss v6.4 Rom Uhans A6

Jingle bells:

Description:

• Another port based on CM 13 with a lot of built-in settings.
  
• Built-in non-system ROOT (Magisk) =>Sberbank Online is not trimmed.
  
• GAPPS is also embedded.
  
• I built modems from 1 custom, communication and the Internet should catch as well, but this is relative to the region ...
  
• Bluetooth and the Wi-Fi access point surprisingly work and do it separately, unlikeAOKP.
  
• A source -tyk

Bugs:

LiveDisplay - what yes as already described here -tyk

All that is in the spoiler "Installation" is mandatory for reading and execution !!!: russian_ru:

Installation:

1. Install stock 6.0 if it is not worth it.
   
2. Make all wipe in TWRP except sd card.
   
3. Install by custom, Gapps and ROOT (in the form of a Magisk) are already embedded.
   
4. Wait for the installation, the reboot into the system will occur automatically

The first download can take from 5 to 15 minutes.

Screenshots Lots of ! CAUTION, TRAFFIC!

Download (I. D,):

https://yadi.sk/d/c0Wrgjs-3Qz48h

Post has been editedAlexanderL - 27.12.17, 12:05

Reason for editing: In the header

[Archi007]

For all those who do not like the built-in GAPPS in my custom, who is an economist from God and considers them to be a waste of resources.

• Go to the topicВ®AntiGapps Script
  
• Looking around: rofl:
  
• Install via TWRP and enjoy the removal of all GAPPS: clap:

I'm not going to delete GAPPS from my custom, but if anyone wants to help, I can explain in hp how to remove them, if they are, and someone uploads a firmware without them to your Yadisk or similar resource, then I’ll add a link to my post with a custom. Alas, my place is not rubber and is nearing the limit ..

Post has been editedAlexanderL - 29.12.17, 22:34

Reason for editing: In the header

[Archi007]

MIUI 8.6 Uhans A6

Description:

• The new version of the Chinese firmware from phones Xiaomi - MIUI 8.6.
  
• Unlike 8.4 - to unlock the fingerprint scanner does not need to turn on the screen.
  
• And also now correctly displays the RAM - our 2GB, instead of 2.5GB.
  
• Built-in non-system ROOT (Magisk).
  
• GAPPS is also embedded.
  
• A source -Asus zenfone go.
  
• Pioneer -ska-vova.

Bugs:

• The network indicator in the blind says that there is no network signal, (the signal is OK).
  
• If your network indicator is no longer displayed. There is a useful program, Fix Signal, reloads the graphical interface.
  
• The second way, turn on and turn off the flight mode.
  
• The third way is to press the lock button 2 times (this will also restart the GUI).
  
• MIUI has its own security, ROOT access yes it provides, with system applications does not do anything.
  
• The Wi-Fi access point does not work, or rather you cannot connect in any way, the solution as on 2 custom does not work. Bug fake if there is a solution. Now it is not.

All that is in the spoiler "Installation" is mandatory for reading and execution !!!: drinks:

Installation:

1. FlashSTOCK6.0, if not worth it.
   
2. Make all wipe in TWRP except sd card.
   
3. Install by custom, Gapps and ROOT (in the form of a Magisk) are already embedded.
   
4. Wait for the installation, the phone will reboot itself.

Screenshots Lots of ! CAUTION, TRAFFIC!

Download (I. D.):

https://yadi.sk/d/GJXIOZfr3R9dEC

Post has been editedMagnifikus - 02.01.18, 10:01

Reason for editing: In the header

[Archi007]

HomTom Mod Uhans A6

Description:

• Based on the stock HomTom HT16, fully cleaned and optimized.
  
• Built in modem fromRRv5.7.4 Asus Zenfone Go, communication and the Internet should also catch well, but this is relative to the region ...
  
• A source -Doogee x5 max.
  
• Fashion author -papaniy10.

Bugs:

• Gestures do not work.

Solving the problem withSuperSU(after deactivation):

• If you deactivate Super SU, if you want to activate it later, there will be an error that some SU file is occupied.
  
• To reactivate, you need to re-flash the archive with SuperSU via TWRP.
  
• Re-flashing for this is not needed, you can install immediately without wipe.
  
• After installing SuperSU and starting the system, SuperSU is activated.

Download SuperSU:

SuperSU + PRO + v2.82SR5.zip(6.32 MB)

All that is in the spoiler "Installation" is mandatory for reading and execution !!!: girl_triniti:

In addition to the profile Viper4Android, install it in your own way.

Installation:

1. FlashSTOCK6.0, if not worth it.
   
2. Make all wipe in TWRP except sd card.
   
3. After wipeMANDATORYreboot into TWRP! (Otherwise, get error 7 when installing).
   
4. Install HomTom mod.
   
5. Wait for the installation, the phone will reboot itself.

Install profile Viper4Android.

1. Unpack the contents of ViPER4Android.zip into internal memory.
   
2. In the settings of the wiper, select a profile, it is there alone.
   
3. Turn on the convolver and choose a boost.

Download Viper4Android:

ViPER4Android.zip(494.51 KB)

Screenshots Lots of ! CAUTION, TRAFFIC!

Update v1.6.1:

Download (I. D,):

• HomTom mod v1.5
  
• Update v1.6.1

Post has been editedArchi007 - 27.02.18, 23:25

Reason for editing: Update v1.6.1

[natnat77]

Archi007The firmware is good, very beautiful, nothing superfluous, everything works, I really liked it!

[DG75]

Archi007, MIUI 8.6 already a week the flight is normal! Put the topic Simbian

I had 5228 lost ... When installing via the built-in application, I got the error "Themes downloaded from third-party sources are not supported" Therefore, thanks to the forum I downloaded from the Play Market Miui Theme Editor

[Archi007]

DG75,
if you can describe well how to make the themes work (step by step), then add it to the header so that others do not fool around, I did everything I could, MIUI no longer wants to install and finish, because the bugs are unsolvable (at the moment) ..

[DG75]

Here isCatalog of themes MIUI v6 / v7 / v8 / v9
itMIUI Theme Editor
1. Download the archive with the theme.
2. Find the archive — rename — remove the zip extension. - mtz will remain
3. Open the MIUI Theme Editor - review, find the topic and so on. etc.
4. Go to the stock application of the theme, select your - apply-reboot - enjoyment - search for a new theme: diver:

Post has been editedAlexanderL - 09.01.18, 22:30

Reason for editing: In the header

[vaalf]

M

We move to subsection:Other brands
A fruitful discussion.

[Tenuem92]

Guys, help please screw on the stock firmware Dolby Atmos

[andrey167]

Besser3224shedding through twrpDolby ATMOS (Post by staryigutsul # 64428336)
In the post option for magisk and normal

[Archi007]

Saving Charge of Google Play Services!

When entering the path "Settings / Battery / Battery saving /", it can be noted thatGoogle Play servicesare in the section "Do not save a charge". To "remove the crown from them" and move it to the "All Applications" section (there are slaves living there and they have "Battery Saving included") you need to do this:

Spoiler:

1. Download google.xml for your version andoid:
   Andoid 6.0/7.1

   google.xml(3.34 KB)
   
   Andoid 8.0/8.1

   google.xml(4.93 KB)
   
   
   
2. Next, go to any ROOT-conductor, go to system / etc / sysconfig.
   
3. In the name of the file "google.xml" located there, append the extension ".bak" at the end (this way you can restore this file by deleting that file and this extension, you can also just move it to another place - your choice).
   
4. After you can with a soul full of calm, insert the downloaded "google.xml" into the folder.
   
5. Permissions need to be set to 0644/0666, personally for me, in ROOT Explorer everything is set as follows:
   Spoiler:

Result:

After reboot:

A source:

Tyk

Post has been editedArchi007 - 19.08.18, 04:36

Reason for editing: In the header

[Archi007]

Lineage OS 13 Uhans A6

Description:

• New port Lineage OS 13 based on Cyanogen Mod 13 with many built-in settings.
  
• Despite the fact that it is Lineage OS 13 - the engine of themes from Cyanogen Mod 13 and their work is checked by me personally.
  
• Built-in non-system ROOT (Magisk) =>Sberbank Online is not trimmed.
  
• This is the first custom, which will have two versions: with Gapps and without Gapps.
  
• Both versions are built in: Magisk and Dolby Atmos.
  
• Kernel 3.18.19+.
  
• A source -Doogee x5.
  
• Involved in itpodkopaewandrock1234- do not forget to thank them too, without them there would be no my port.

Bugs:

LiveDisplay:

After the first power up, you need to turn off LiveDisplay along the path: Settings / Display / LiveDisplay, otherwise the system “thinks for a long time”} -).

Screenshot:

Wi-Fi hotspot:

The bug is that you cannot connect to the point, but if you turn on the Bluetooth-modem or simply Bluetooth, then the connection goes (after connecting Bluetooth you can turn off). Further, for a device that has already connected, you do not need to turn on Bluetooth, 2 and further times the connection will go without Bluetooth turned on.

Screenshot:

All that is in the spoiler "Installation" is mandatory for reading and execution !!!: friends:

Installation:

Preliminary:

To install custom you need:

• To begin with, if you are a person with experience, it is necessary to make a backup of the NVRAM partition before flashing any drain or custom.
  
• Put the stock 6.0 through the SP Flash Tool in the "Firmware Upgrade" mode, if there is a drain 7.0 or a custom based on its kernel (3.18.35+ - you can look at the screens).
  
• If you already have stock 6.0 or a custom based on its core (3.18.19+ - you can look at the screenshots), then you can immediately proceed to install the custom.

Instructions for installing custom:

1. Install stock 6.0 if it is not worth it ↑.
   
2. Make all wipe in TWRP except sd card.
   
3. Install the custom, Gapps (if you choose the version with them) and ROOT (in the form of a Magisk) are already embedded.
   
4. Wait for the installation, the phone will reboot itself.

The first download can take from 5 to 15 minutes.

Screenshots Lots of ! CAUTION, TRAFFIC!

Download (I. D.) :

• Without Gapps -tyk.
  
• With embedded gapps -tyk.

Post has been editedArchi007 - 24.06.18, 21:35

Reason for editing: In the header