18 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Keenetic 4G (KN-1210) - Discussion | [wifirouter]
enpa
Message#1
10.01.18, 16:19
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Keenetic 4G (KN-1210)- Discussion
ZyXEL Keenetic 4G - Discussion
Attached Image

Attention! This model of the router does not support connecting USB-drives!

Information
Description
  • Product Name:4G
  • Part Number:KN-1210-01RU
  • NDM HW ID:KN-1210
  • Supports more than 150 models of USB modems for primary or backup Internet connection
  • Continuous 24/7 communication monitoring
  • Ethernet connection reservation
  • High-precision 5-dBi printed Wi-Fi antennas
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment
Additional photo
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

foto by enpa
Specifications
Main characteristics

Model Index - KN-1210
The processor - MediaTek MT7628N (MIPS24Kc) 575MHz
RAM - 64 MB DDR2
Flash Memory - 16 MB (Dual Boot)
Wi-Fi 2.4 - Yes
Wi-Fi Class - WiSoC 2T2R / 300Mbps (2.4GHz)
Antennas - 2 x 5 dBi
Ethernet ports - 4 x 100 Mbit / s

USB Ports - USB 2.0 (Modems Only)
Wi-Fi / WPS Button - Yes
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL

Performance

2.4 GHz Wi-Fi network speed, Mbps - 300
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection ✔
Support for additional guest Wi-Fi network ✔
MAC access control ✔
WPS Quick Setup ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
UDP to HTTP proxy ✔
IPSec VPN Client / Server ✔
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H 107 mm x 91 mm x 26 mm
Mass device 138g
Operating temperature range 0–40 ° С
Humidity of air at work 20–95%
Power supply voltage 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
How to print from phone to printer via Android OS
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
We fix the display of interfaces in the Connections section of enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Comments on the work of the Padavana TX Burst
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
XMEye and KN-1210 camera operation by furry-cheetah
TTL lock
Keenetic Recovery
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule:

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

Digital television:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

IntelliQoS:
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.10

2.11

2.12

2.13

2.14

2.15
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.
The program for recovering KN-1210 firmware.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 25.05.19, 18:30
Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic
Vitaly7979
Message#22
23.04.18, 09:47
Visitor
**
[offline]

Group: Active users
Messages 26
Check in: 23.05.10

Reputation:-  1  +

Greetings

Can you please tell me if this unit will suit me?
You need to plug in the 825FT USB modem and that the transmission should work on the zidoo prefix connected with the cable.
The problem is that the mobile operator cuts down the speed of the torrents.
The question is: is it possible to configure vpn on the router so that the torrents normally swing on the console?

Thank.
romicom
Message#23
14.05.18, 23:21
Novice
***
[offline]

Group: Active users
Messages 45
Check in: 12.01.10
Jiayu G4 Advanced

Reputation:-  5  +

Tomorrow I go to the store for the box, I will use the MegaFon M150-2, tell me which mode the modem will work best for, I mean the stick or Hilink modem firmware, I just need to set up and send far away, where there is no one to experiment with the modems, you need to install and forget .


--------------------
Jiayu G4 Advanced 2/32/3000 (black) + vredniy mod v2.6.1
HiMedia Q10II eMMC
The machine loves affection, cleanliness and lubrication!
alex58penza
Message#24
15.05.18, 01:06
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 30.11.15

Reputation:-  1  +

In Hilink
enpa
Message#25
23.05.18, 17:36
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Official beta firmware version2.12.B.0.0-0 dated 05.23.2018for KN-1210

<Starting with firmware version 2.12, the old web interface has been removed. >

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
usb
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
usbdsl
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
nortondns
ddns
nathelper-ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

New WebUI Screenshots
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Changes
Version 2.12.B.0.0-0 (official beta *):

Available for: Keenetic 4G III rev.B, Keenetic 4G (KN-1210),

New features and other improvements:

• Changed web interface design
• Added the ability to select the default route for hosts and home network segments (Policy Based Routing)
• SSTP server and client added
• Added SSH server
• AdGuard DNS filter added.
• Added support for MegaFon USB modems: MR300-1 (Huawei E5786), MR150-2 (ZTE MF910); MTS 829FT (Huawei E3372h-210); TELE2 WeWins OSH-150
• Added support for ARP Proxy on L2TP / IPsec and SSTP server
• Improved Wi-Fi performance
• SIP: SIP ALG port setting added
• IPsec: improved connection stability
• IPv6: added ability to set home host access rules over TCP / UDP
(with)http://service.ndmsystems.com/changelog.html

Installation process and debug mode
1. Download firmware version 2.12.B.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.B.0.0-0 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic 4G_KN-1210_2.12.B.0.0-0.zip(6.81 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
Picture
Archimedoff
Message#26
26.05.18, 19:00
Novice
***
[offline]

Group: Active users
Messages 31
Check in: 16.06.10
Xiaomi Mi 5

Reputation:-  0  +

Good day. Please tell me what could be the case on this issue. Previously, opened the network environment and saw the connected USB drive. Now the disk is not visible. I turn to the disk not often, but the problem is more than a month exactly. I suspect after some update. Where to look and what to twist?

Attached images
Attached Image
Attached Image


Post has been editedArchimedoff - 26.05.18, 19:22
dimagrs
Message#27
04.06.18, 20:19
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 619
Check in: 27.09.13

Reputation:-  59  +

I bought myself this unit. I like everything, the only thing that could not find traffic statistics for each day, the whole period of work. Is it possible to see her?
kpaxhost
Message#28
05.06.18, 00:11
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 193
Check in: 23.06.10
Highscreen Boost 3 Pro

Reputation:-  1  +

* alex58penzaAre you ukreny? Hilink before kinetics fulfills another router. Wouldn't it be better to use a Stick so that the kinetics would directly “drive” the connection itself?
Wuga
Message#29
05.06.18, 06:13
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 168
Check in: 06.03.11
Honor 5A L21

Reputation:-  14  +

kpaxhost @ 06/05/18, 0:11*
Wouldn't it be better to use a Stick so that the kinetics would directly “drive” the connection itself?

In the highlink you can see the network settings and steer the modem through the webmord. Especially true when the antenna is connected.
kpaxhost
Message#30
05.06.18, 08:43
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 193
Check in: 23.06.10
Highscreen Boost 3 Pro

Reputation:-  1  +

* Wuga, The stick also shows the network settings (two of them). Why I asked. So, as the modem will work as a bridge, without distributing dhcp and the rest of the router functionality, will there be a smaller load on it? Perhaps he will be less warm?
enpa
Message#31
06.06.18, 01:49
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

* wasilukNo, this router model works only with USB modems.


--------------------
enpa
Message#32
09.06.18, 18:14
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Official beta firmware version2.12.B.0.0-2 of 05/31/2018for KN-1210

<Starting with firmware version 2.12, the old web interface has been removed. >

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
usb
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
usbdsl
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
nortondns
ddns
nathelper-ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
Version 2.12.B.0.0-2 (official beta *):

Available for: Keenetic 4G III rev.B., Keenetic 4G (KN-1210), Keenetic Air II, Keenetic Start II, Keenetic Lite III rev.B, Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• A number of fixes and improvements in the user interface on the pages "Users"
• Also reduced the load on the processor of the Internet center, created by the work of the web interface
• Fixed co-operation of the PingChecker service with OpenVPN
• Fixed access to web applications on the home network via KeenDNS in SSL mode
(with)http://service.ndmsystems.com/changelog.html

Installation process and debug mode
1. Download firmware version 2.12.B.0.0-2
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.B.0.0-2 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic 4G_KN-1210_2.12.B.0.0-2.zip(6.81 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
Picture


Post has been editedenpa - 09.06.18, 18:15
Sasha-star
Message#33
06.07.18, 13:13
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 298
Check in: 28.10.09
Samsung Galaxy Note 3 LTE SM-N9005

Reputation:-  78  +

Great router. In conjunction with zte mf 79 and the operator Tele 2 holds a good speed. The network does not reset, keeps stable. WI-FI coverage is about 100 m / 2.
Attached Image


Post has been editedSasha-star - 06.07.18, 13:19
Reason for editing: Edit
enpa
Message#34
09.07.18, 17:10
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.12.C.0.0-1 from 07/09/2018for KN-1210


Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
usb
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
usbdsl
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
nortondns
ddns
nathelper-ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
Version 2.12.C.0

Available for: Keenetic 4G III rev.B, Keenetic 4G (KN-1210),

New features and other improvements:

• Changed web interface design
• Added the ability to select the default route for hosts and home network segments (Policy Based Routing)
• SSTP server and client added
• Added SSH server
• AdGuard DNS filter added.
• Added support for MegaFon USB modems: MR300-1 (Huawei E5786), MR150-2 (ZTE MF910); MTS 829FT (Huawei E3372h-210); TELE2 WeWins OSH-150
• Added support for ARP Proxy on L2TP / IPsec and SSTP server
• Improved Wi-Fi performance
• Implemented SSID support in UTF-8
• Added SIP ALG port setting
• Improved IPsec connection stability
• IPv6: added ability to set home host access rules over TCP / UDP
• Implemented IGMP snooping in additional modes
• Fixed access to web applications on the home network via KeenDNS in SSL mode

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.12.C.0.0-1
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.C.0.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic 4G_KN-1210_2.12.C.0.0-1.zip(7.08 MB)

Mirror:
cloud.mail - v2.04-v2.12 Firmware Keenetic
yandex.disk - v2.04-v2.12 Firmware Keenetic
Picture
Screwdry
Message#35
09.07.18, 20:41
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 62
Check in: 10.05.09

Reputation:-  0  +

Thanks for the long-awaited stable release!
The only thing really wanted is that the menu sections stand out compared to the items ... At least just in bold text.


--------------------
Sincerely.
pvspec
Message#36
10.07.18, 21:32
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 11.09.12

Reputation:-  0  +

Ilya Khrupalov @ 04/04/18, 01:50*
when next time there is no Internet, go to the web-kinetics kinetics and right on the first page press the circular arrow opposite the modem (if it will show itself). This will restart the modem (but not the kinetics). If the Internet appears, then, I hope, it is clear who is to blame. To prevent this from happening, it is advisable to enable / tweak pingchik in kinetics. If you do not understand, ask for the support of the kinetics, they will teach there.

Please specify, in the new 4G (KN-1210) with a white case does this function work or not? And then in the support they write that with a white case is not supportedArticle FAQ Is it possible to reboot on power USB-modem connected to Keenetic
LMG2
Message#37
11.07.18, 00:50
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 216
Check in: 15.01.09
Samsung Galaxy A6 + SM-A605F

Reputation:-  7  +

In a country house I use the Internet Megaphone.
A bunch of ZyXEL Keenetic III and USB-modem M150-2 in forced 3G mode.
Because in 3G the speed is stable up to 29 Mbit, and in 4G from 5 to 10 Mbit.
Apparently Megaphone cuts speed forcibly, but they do not confess. (wrote a request).
I bought Zyxel Keenetic 4G (KN-1210) and connect the same USB-modem.
Internet speed drops to 5 Mbps.
It turns out that the Zyxel Keenetic 4G (KN-1210) automatically puts the USB modem in 4G mode.
I connect the USB modem to the computer and transfer it again forcibly into 3G mode.
I test the speed - almost 29 Mbit.
But when connected to Zyxel Keenetic 4G (KN-1210), it again goes to 4G.
How to make the USB modem work in a new router only in 3G mode?

Post has been editedLMG2 - 11.07.18, 01:03
Wuga
Message#38
11.07.18, 12:50
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 168
Check in: 06.03.11
Honor 5A L21

Reputation:-  14  +

LMG2 @ 07/11/18, 0:50*
How to make the USB modem work in a new router only in 3G mode?

Ask for a modem threadHuawei E3372 (MTS 827F / 829F, MegaFon M150-2, Beeline E3372 / E3370, TELE2 E3372h-153) - Discussion
LMG2
Message#39
12.07.18, 00:55
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 216
Check in: 15.01.09
Samsung Galaxy A6 + SM-A605F

Reputation:-  7  +

Keenetic support service helped fix the router and modem in 3G mode.
----
Try this command in the CLI kinetics,
it forces the use of only 3G -
Internet Center Command Line Interface (CLI)

interface usbLte0 usb acq umts
system configuration save
----
How to switch back to 4G did not write ...
enpa
Message#40
12.07.18, 12:13
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

* LMG2,To return LTE, you need to enter the following commands:

interface UsbDsl0
usb acq lte
exit
system configuration save

reset default:

interface UsbDsl0
no usb acq lte
exit
system configuration save


Post has been editedenpa - 12.07.18, 12:13


--------------------
Vinnitoo777
Message#41
12.07.18, 19:44
Novice
***
[offline]

Group: Active users
Messages 31
Check in: 04.11.16

Reputation:-  1  +

The same trouble with this update, only I have fun. The modem tele2 breaks constantly to 2g mode. Prior to this unfortunate update, the network kept steadily 3g. While using the Internet, everything is fine. A little 5 minutes of downtime and the scribe comes. It is treated only by rebooting.

18 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/28/19 11:05