[X]Assistant

[enpa]

Keenetic 4G (KN-1210)- Discussion
ZyXEL Keenetic 4G - Discussion

Attention! This model of the router does not support connecting USB-drives!

Information

• Official Keenetic Community Firm Support Forum
  
• Official Support Center on Keenetic.net (registration is required)
  
• Registering a device on Keenetic.net (3 years warranty from the date of purchase + 1 year upon registration)
  
• Keenetic authorized service centers:Russia, Ukraine, Kazakhstan, Republic of Belarus
• Transmitter Power at Keenetic Home Internet Centers

Description

• Product Name:4G
  
• Part Number:KN-1210-01RU
  
• NDM HW ID:KN-1210

• Supports more than 150 models of USB modems for primary or backup Internet connection
  
• Continuous 24/7 communication monitoring
  
• Ethernet connection reservation
  
• High-precision 5-dBi printed Wi-Fi antennas
  
• Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  
• Configure and manage your home network via mobileattachment

Additional photo

foto by enpa

Specifications

Main characteristics

Model Index - KN-1210
The processor - MediaTek MT7628N (MIPS24Kc) 575MHz
RAM - 64 MB DDR2
Flash Memory - 16 MB (Dual Boot)
Wi-Fi 2.4 - Yes
Wi-Fi Class - WiSoC 2T2R / 300Mbps (2.4GHz)
Antennas - 2 x 5 dBi
Ethernet ports - 4 x 100 Mbit / s
USB Ports - USB 2.0 (Modems Only)
Wi-Fi / WPS Button - Yes
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL

Performance

2.4 GHz Wi-Fi network speed, Mbps - 300
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE вњ”
PPPoE вњ”
PPTP вњ”
L2TP вњ”
802.1x
CABiNET вњ”
Multiple PPP Tunnels вњ”
PAP / CHAP / MS-CHAP / MS-CHAP v2 вњ”
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q вњ”
Route Table (DHCP / Manual) вњ”
Link Duo вњ”
DHCP (client / server) вњ”
IPv6 Dual Stack вњ”
NAT вњ”
Igmp вњ”
UPnP
Manual port forwarding вњ”
PPTP / L2TP Transit вњ”
SPI DoS Attack Firewall вњ”
Ping checker вњ”

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection вњ”
Support for additional guest Wi-Fi network вњ”
MAC access control вњ”
WPS Quick Setup вњ”
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS вњ”
UDP to HTTP proxy вњ”
IPSec VPN Client / Server вњ”
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS вњ”
Parental control SkyDNS вњ”
Dynamic DNS client вњ”

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H 107 mm x 91 mm x 26 mm
Mass device 138g
Operating temperature range 0–40 ° С
Humidity of air at work 20–95%
Power supply voltage 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian вњ”
Command Line (CLI) by TELNET
The ability to control from the external network вњ”
Backup and restore configuration вњ”
Software update features вњ”
Logging system events вњ”

Equipment

Device
Power adapter вњ”
Ethernet cable вњ”
Instructions for use вњ”

Certificates

RU C-TW.РђРЇ46. Р’.82580 (up to 10/26/2022) .pdf(3.34 MB)

RU00000034232 (up to 10/01/2025) .pdf(793.28 KB)

Documentation

Instructions for use KN-1210.pdf(360.84 KB)

Description and specifications of KN-1210.pdf(761.08 KB)

Reference CLI command interface KN-1210 of 12/21/2018.pdf(4.01 MB)

Reviews, links

Keenetic Resources

Keenetic official website
Official Keenetic Block
VK official group
Official Facebook page
Instagram official page
Keenetic Telegram's Unofficial Channel
Information channel Keenetic firmware in Telegram
KeeneticOS Developer Forum

Reviews, tests, reviews

Full info on 4G KN-1210 on Keenetic.net
Keenetic 4G KN-1210 on the market.yandex.ru

Useful information

Problem solving, setup

Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
How to print from phone to printer via Android OS
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
We fix the display of interfaces in the Connections section of enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Comments on the work of the Padavana TX Burst
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
XMEye and KN-1210 camera operation by furry-cheetah

TTL lock

How to fix TTL
YOTA restrictions bypass
Management of TTL value for incoming (from provider) and outgoing (to provider) packets

Keenetic Recovery

Example of restoring service code (servicetag) from olegk1
Example of restoring service code (servicetag) from LuckyNeo
An example of recovery through the unsoldered connector of the router console from Must_Die
Example of firmware recovery with the replacement of the firmware file from Leonid28
Detailed instructions for restoring environment variables in ZyXEL Keenetic series Internet centers and new Keenetic series from _Danila_Master_

Instructions

Keenetic Support Center (articles, instructions)

Internet connection setup:

• NetFriend Initial Setup Wizard
  
• Ways to connect to the Internet
  
• Ethernet connection to the Internet
  
• Internet connection via optics (SFP module)
  
• PPPoE Internet connection
  
• Connect to the Internet via PPTP or L2TP
  
• Connecting to the Internet via a 3G / 4G modem
  
• Connect to the Internet via ADSL
  
• Connect to the Internet via VDSL
  
• Configure a VDSL connection between two Internet centers
  
• Connecting to a Wi-Fi network (Wireless ISP)
  
• Other connections
  
• Connection Priorities
  
• Connecting home network devices
  
• Web Configurator (control panel)
  
• Instructions for the initial setup of Internet centers through the Quick Setup Wizard (for NDMS versions 2.11 and earlier)
  
• Self-configuring Keenetic to connect to the Internet via an Ethernet cable (for NDMS versions 2.11 and earlier)
  
• Internet Center and GPON-modem sharing options
  
• MTU value setting
  
• Configuring the network adapter MAC address cloning (for NDMS versions 2.11 and earlier)
  
• WAN MAC address change

Install and configure KeeneticOS:

• System monitor
  
• Host traffic monitor
  
• Network accelerator
  
• Windows network (file and printer access)
  
• Online Center Software Update
  
• Automatic update of the operating system
  
• Beta Software Update
  
• Installing and updating firmware by downloading the system file
  
• Saving startup-config configuration file
  
• Saving self-test system file
  
• Change the mode of operation and assignment of network connectors
  
• Purpose of buttons and indicators of the Internet center
  
• Indicator Management
  
• Users and access (how to change the administrator password)
  
• Description of the components of the Internet Center firmware
  
• Installing and upgrading NDMS versions by downloading a file (for NDMS versions 2.11 and earlier)
  
• Configuration files (system files)
  
• Updating the components of the Internet center through the mobile application My.Keenetic
  
• Installation of NDMS operating system components via a web interface (for NDMS versions 2.11 and earlier)
  
• Setting up Internet center user accounts
  
• Internet center light indicators control (for NDMS versions 2.11 and earlier)
  
• Why is Keenetic Internet Center unavailable at my.keenetic.net web address, but only at IP address?
  
• How to assign functions to the buttons that are located on the Keenetic case (for NDMS versions 2.11 and earlier)
  
• Variants of the DHCP server on the interfaces of the Internet center
  
• Option "Install updates automatically" (for NDMS versions 2.11 and earlier)

Reset:

• Resetting the Internet center and administrator password
  
• Resetting the Internet center and administrator password (using the Reset button)

Diagnostics:

• Diagnostics
  
• Collecting logs from the Keenetic system log when the device is unavailable (hang)
  
• Perform diagnostics (debugging) to resolve configuration issues or troubleshoot (for NDMS versions 2.11 and earlier)
  
• Saving configuration file, system log and diagnostic file (for NDMS versions 2.11 and earlier)
  
• Configure SNMP server
  
• Saving the log of system messages (logs) on the Syslog server
  
• Diagnostics of client and DHCP server operation
  
• Capture network packets using Wireshark
  
• Using the built-in network packet capture module (for NDMS versions 2.11 and earlier)
  
• How to find out port numbers for some services displayed on the Connections tab in the System Monitor?
  
• Setting speed / duplex parameters on the Ethernet port (for NDMS versions 2.11 and earlier)
  
• When do I need to collect network packet dumps from a computer or a router port?

Recovery firmware:

• How to restore the operating system of the Internet center?
  
• KeeneticOS recovery method (for advanced users)

Reservation

• Connect to multiple providers and reserve online channel
  
• Setting up Internet reservations via 3G / 4G-modem
  
• Internet Accessibility Checker - Ping Check (for NDMS versions 2.11 and earlier)
  
• Simultaneous connection to two providers and reservation of the Internet channel (for NDMS versions 2.11 and earlier)

Speed ​​Limit:

• Speed ​​limit for home network devicesGuest Wi-Fi network
  
• Setting a speed limit for a home network device (for NDMS versions 2.11 and earlier)
  
• Connection speed limit for Guest Wireless devices (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Remote access:

• Domain Name Service KeenDNS
  
• An example of remote access to home network resources via KeenDNS
  
• Access to the Internet center via KeenDNS over HTTPS
  
• How to provide remote access to Keenetic Internet Center for technical support?
  
• Remote access via SSH to the Keenetic command line
  
• What is the difference between the "white" and "gray" IP-address?Using KeenDNS remote access service (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via KeenDNS using domain names 4th level (for NDMS versions 2.11 and earlier)
  
• Setting up remote access to the Internet center from the Internet
  
• Remote access from the Internet to a home network computer connected via Keenetic (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode
  
• An example of remote access to home network resources via the KeenDNS service (using classic NAT rules)
  
• Wake device over network (Wake-on-LAN)
  
• Transfer the domain name KeenDNS to another Internet center

VLAN:

• Sharing tagged and untagged traffic on the WAN port of the Internet centerConfiguring simultaneous operation with tagged and untagged traffic
  
• Organization of several local networks with different main gateways
  
• Creation of several independent subnets on the local area network's Internet using VLAN
  
• Internet reservations between two Internet centers

Forwarding and port configuration:

• Port Forwarding
  
• Forwarding all ports to a local network host (organization of a DMZ host)
  
• Using Xbox and PS4 when connected via Keenetic
  
• Syntax and description of the ip static command to configure NAT network address translation
  
• What to do if port forwarding does not work?
  
• What to do if port forwarding does not work? (for NDMS versions 2.11 and earlier)
  
• When should you use port forwarding and firewall rules?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• Configuring port forwarding through a backup connection
  
• Configuring port forwarding in the Internet center (for NDMS versions 2.11 and earlier)
  
• Setting port forwarding in Keenetic to work correctly with the ВµTorrent program
  
• Configure forwarding of all ports to one computer in a local network (for NDMS versions 2.11 and earlier)
  
• How to replace the port number of the Internet center?
  
• Change of standard ports of control of the Internet center
  
• UPnP service

Wi-Fi setup:

• Wi-Fi seamless roaming
  
• Captive portal
  
• Connect to a Wi-Fi network
  
• How to change the name and password of the Wi-Fi network?
  
• 2.4 GHz wireless Wi-Fi network
  
• Wi-Fi 5 GHz Wireless Network
  
• General recommendations for the placement in the apartment of an Internet center with Wi-Fi interface for stable and high-quality wireless network
  
• What affects the operation of wireless networks, Wi-Fi? What could be a source of interference and what are their possible causes?
  
• Keenetic Wireless Power Level Indicator Scale
  
• Wireless connection to the Internet center from Windows 10
  
• Mobile device does not see the Wi-Fi network 5 GHz?
  
• Wi-Fi signal attenuation coefficients when passing through various environments
  
• Why is the Wi-Fi connection speed lower than stated?
  
• MAC address of the access point (BSSID) to connect
  
• Print a QR code to connect to a Wi-Fi network
  
• Wi-Fi network management with a button on the case
  
• Same network name (SSID) in the 2.4 / 5 GHz band
  
• The "Hide SSID" option in the access point settings
  
• Do I need to register an Internet center in Roskomnadzor?
  
• Guest Wi-Fi network
  
• Setting up a Wi-Fi guest wireless network (for NDMS versions 2.11 and earlier)
  
• Setting up an Internet center in WISP mode to work with an upstream access point or a Wi-Fi provider (for NDMS versions 2.11 and earlier)
  
• Selecting a wireless channel for the access point to work
  
• Real connection speed used in Wi-Fi technology
  
• How to scan a Wi-Fi network and determine the most free channel?
  
• How to set the direction of antennas on the Internet center of the Keenetic series?
  
• No internet access from the guest Wi-Fi network
  
• Create additional Wi-Fi access points
  
• What affects the change in the signal power parameter in the settings of the access point?
  
• Basic provisions of the IEEE 802.11ac standard
  
• Basic provisions of the IEEE 802.11n standard
  
• Setting the width of the wireless channel 20/40 MHz
  
• Ways to increase connection speed, bandwidth and stability of a wireless Wi-Fi network
  
• Possible malfunctions of the Wi-Fi network after connecting a USB 3.0 device to the Internet center
  
• Band steering
  
• Beamforming technology
  
• How the Band Steering mechanism works and why include it (for NDMS versions 2.11 and earlier)
  
• Differences in the 2.4 GHz and 5 GHz frequency bands

WPS (Wi-Fi Protected Setup):

• Connect to a Wi-Fi network using the WPS standard
  
• Quick WPS configuration (for NDMS versions 2.11 and earlier)
  
• Setting up a connection to the Internet center via Wi-Fi from a mobile device running Android OS using the WPS function

Security and DNS:

• How is the firewall implemented?
  
• Firewall
  
• Configuring Firewall Rules from the Command Interface
  
• Copy, move and delete multiple firewall rules
  
• The brute force protection feature for accessing the Internet Center
  
• Denying access to the web configurator from the guest network
  
• AdGuard DNS Internet Filter
  
• Internet filter Yandex.DNS
  
• Internet filter SkyDNS
  
• Home network protection and content filtering using the Yandex.DNS service (for NDMS versions 2.11 and earlier)
  
• Protect your home network and filter content using SkyDNS (for NDMS versions 2.11 and earlier)
  
• DDNS Domain Name
  
• Setting up and using the dynamic DNS service from No-IP
  
• Dynamic DNS Service Setup - DNS Master
  
• Using a firewall to provide different access rights to the Internet
  
• Examples of using firewall rules
  
• Examples of using firewall rules (for NDMS versions 2.11 and earlier)
  
• Internet access control feature on home network devices page
  
• How in the Internet center to block access to the Internet on port 80 (HTTP) to all users, except one, with the specified IP address?
  
• How to block access to a specific site?
  
• Configuring the Internet Center to block the access of the home network to a specific web resource (for NDMS versions 2.11 and earlier)
  
• How to block access to your own Internet center resources (web, cli, cifs, ftp, transmission) from the Guest Wireless Network?
  
• Configure Internet Center firewall rules that use a range of IP addresses or ports
  
• Examples of Internet center firewall rules that use port ranges
  
• When should you use port forwarding and firewall rules?
  
• Wi-Fi access control
  
• MAC access control for Wi-Fi wireless network (for NDMS versions 2.11 and earlier)
  
• In what order are the firewall rules executed?
  
• Using public DNS servers in the Internet center
  
• Firewall Description (for NDMS 2.11 and earlier)
  
• WPA2 KRACK vulnerability protection

schedule:

• Connection schedule
  
• Schedule home network devices
  
• Setting up schedules in the Internet center (for NDMS versions 2.11 and earlier)
  
• Parental Control: Disconnecting the Internet on a Schedule (for NDMS versions 2.11 and earlier)
  
• Disable all indicators on schedule
  
• Internet center reboot on schedule
  
• Schedule of firewall and port forwarding rules

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

• All about IPIP, GRE and EoIP tunnels (starting with firmware v2.08)
  
• Tuning IPIP, GRE and EoIP tunnels
  
• Setting up an IPSec VPN tunnel between the Internet hub and a Windows computer
  
• IPSec VPN client / server
  
• IPSec VPN tunnel organization between two Keenetic Internet Centers (for NDMS versions 2.11 and earlier)
  
• An example of creating IPSec connections using Windows operating system
  
• Connect Windows to IPsec Virtual-IP via Shrew VPN Client
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a mobile device with Android OS
  
• Setting up an IPSec VPN tunnel (IPSec Virtual IP) between Keenetic and a mobile device with iOS
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a Windows computer
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a computer with Mac OS
  
• Combining two local area networks with gray IP addresses using Keenetic via vpnki
  
• PPTP VPN server
  
• Setting up a PPTP VPN server in Keenetic (for NDMS versions 2.11 and earlier)
  
• Creating a PPTP Connection in Windows OS to the Internet Center VPN Server
  
• Static IP address for user when connecting to Keenetic PPTP server
  
• Connection to the PPTP server of the Internet center for several users under one account
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Network Routing through VPN
  
• Connect two local networks using Keenetic Internet Centers using PPTP Server (for NDMS versions 2.11 and earlier)
  
• Connect to the VPN server of the Internet center to access a remote local network and to gain access to the Internet
  
• Features of connecting to the PPTP server of the Internet center from Windows
  
• Is it possible to connect more than two home networks with the help of Internet centers using PPTP Server?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• OpenVPN Client
  
• OpenVPN server
  
• Local area networking via OpenVPN
  
• An example of setting up access between local networks of Keenetic Internet Centers using the OpenVPN server located in the cloud hosting
  
• Is it possible to create an OpenVPN server like TAP?
  
• Using the OpenVPN client (for NDMS versions 2.11 and earlier)
  
• OpenVPN server on Keenetic (for NDMS versions 2.11 and earlier)
  
• Connecting via SSTP from Windows
  
• SSTP connection from Android
  
• SSTP VPN server
  
• L2TP / IPsec Client (L2TP over IPsec)
  
• Connecting to the integrated L2TP / IPSec VPN server from a device on iOS and Windows
  
• L2TP / IPsec connection example in Windows 7
  
• VPN server L2TP / IPsec
  
• Configuring Windows Firewall for connections from the network behind a Keenetic VPN server

Digital television:

• Setting up an IPTV connection (IPTV)
  
• Setting up Keenetic Internet Center for watching digital television (IPTV) (for NDMS versions 2.11 and earlier)
  
• UDP proxy
  
• Setting up IPTV viewing using the UDP Proxy function (UDP-HTTP proxy) (for NDMS versions 2.11 and earlier)
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Setting up Keenetic DSL Internet Center for IPTV
  
• The option of using the Internet center to watch IPTV, which comes to the GPON-modem
  
• Setting up an IPTV from Rostelecom when connected to the Internet via Ethernet
  
• Setting up simultaneous access to the Internet and IPTV service through two different providers
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)

CLI (command line), SSH:

• Internet Center Command Line Interface (CLI)
  
• Terminal program for Windows
  
• Enabling Telnet and TFTP services in Windows
  
• Connect to the command line interface (CLI) of the Internet Center from Mac OS

Modes:

• Additional modes of operation
  
• Access Point Mode
  
• Amplifier Mode
  
• Adapter Mode
  
• Expansion of Wi-Fi network coverage in "Amplifier" mode (for NDMS versions 2.11 and earlier)
  
• How to configure the wireless bridge mode in the Internet center? (for NDMS versions 2.04)
  
• Access to the Keenetic web configurator when it works in one of the additional modes
  
• Ability to access the web configurator when Keenetic Lite III is in Access Point mode (for NDMS versions 2.11 and earlier)
  
• Internet center in the mode of a normal wireless access point (for NDMS version 2.04)
  
• Update NDMS OS when the Internet center is operating in the mode of a normal wireless access point
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode

3G / 4G modems:

• List of supported USB modems
  
• APN parameter setting for USB modem
  
• How to add a new USB-modem, which is not in the list of supported?
  
• Update NDMS components of the Internet center via a 3G / 4G modem, added only in the beta version, which is not on the site
  
• Access to USB modem web interface via KeenDNS service

Digital telephony:

• Digital telephony
  
• Telephone Station Keenetic Plus DECT (for NDMS versions 2.11 and earlier)
  
• DECT base station
  
• DECT tube setup
  
• Telephone lines
  
• Using the Keenetic Plus DECT module to implement a DECT cordless telephone station
  
• Which DECT handsets can be used with the Keenetic Plus DECT telephone exchange?
  
• SIP telephone line setup
  
• Call Log

IntelliQoS:

• IntelliQoS service
  
• Description of the setting and operation of the IntelliQoS function (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Internet speed testing

http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.

Application to manage the router

My.Keenetic (iOS) - provides management of basic settings and built-in services of Keenetic Internet Centers

My.Keenetic (Android) - provides management of basic settings and built-in services of Keenetic Internet Centers

Keenetic (Android) - beta version of the new application for managing routers Keenetic

Firmware

Table of current versions of KeeneticOS

Information about releases of KeeneticOS (Announcements of new versions of the embedded operating system with a list of changes)

The official version of KeeneticOS

KeeneticOS out of the box

Keenetic 4G_KN-1210_2.10.A.7.0-2.bin.zip(6.39 MB)

2.10

Keenetic 4G_KN-1210_2.10.C.1.0-0.bin.zip(6.56 MB)

2.11

The official beta firmware version 2.11.B.1.0-0 dated 02.22.2018 for 4G KN-1210

Stable version of the firmware 2.11.C.0.0-1 from 03/05/2018 for 4G KN-1210

Stable version of the firmware 2.11.C.1.0-2 from 04/06/2018 for KN-1210

Stable version of the firmware 2.11.C.1.0-3 from 04/12/2018 for KN-1210

2.12

The official beta firmware version 2.12.B.0.0-0 dated 05.23.2018 for KN-1210

The official beta firmware version 2.12.B.0.0-2 dated 05.31.2018 for KN-1210

Stable version of the firmware 2.12.C.0.0-1 from 09/07/2018 for KN-1210

Stable firmware version 2.12.C.1.0-3 from 08.08.2018 for KN-1210

2.13

The official beta firmware version 2.13.B.0.0-0 from 08/30/2018 for KN-1210

The official beta firmware version 2.13.B.0.0-2 from 09/07/2018 for KN-1210

Stable firmware version 2.13.C.0.0-1 dated 10/02/2018 for KN-1210

Stable version of the firmware 2.13.C.0.0-3 from 10/17/2018 for KN-1210

2.14

The official beta firmware version 2.14.B.0.0-1 dated 11/08/2018 for KN-1210

Stable firmware version 2.14.C.0.0-0 from 12/03/2018 for KN-1210

Stable firmware version 2.14.C.0.0-4 from 12/26/2018 for KN-1210

2.15

The official beta version of the firmware 2.15.B.0.0-1 from 02/11/2019 for KN-1210

Stable firmware version 2.15.C.0.0-0 dated 02.28.2019 for KN-1210

Stable version of KeeneticOS 2.15.C.3.0-0 from 04/01/2019 for KN-1210

Stable version of KeeneticOS 2.15.C.4.0-1 from 05/16/2019 for KN-1210

Debug version of KeeneticOS

Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

• Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  
• Changelog of debug versions of KeeneticOS -here.
  
• Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.

The program for recovering KN-1210 firmware.

Keenetic-4G-KN-1210-Recovery.zip(7.3 MB)

KeeneticOS firmware catalog

• Keenetic firmware store on cloud.mail from enpa
  
• Keenetic firmware repository on yenpa.disk from enpa
  
• File storage from ndmsystems

The curator of the topic is enpa

Post has been editedenpa - 25.05.19, 18:30

Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic

[am_rus]

Dear, what say for this model.

I have been using the whole line of Keenetic 4G for a long time (since the first version). Zyxel products are completely satisfied, but this child has not yet tried. Is it worth it to take KN-1210 and install it for clients to work in 3G and 4G networks?

[Antoxa34]

The description is written. Supports more than 150 models of USB modems, but which ones and which one is better to buy for a stable 4G (LTE)? The question is very relevant in connection with the imminent opening of the summer season and the organization of wireless Internet)

[enpa]

Antoxa34,table of supported USB-modems can be found in the article Knowledge Base -List of supported USB modems.

Which is better? This is a different topic, the topics of the modems need to be asked. In each area, it catches different things, etc.

[Kehke]

I connected the yota swift modem to it, I bought it just a week ago. The serial number of the modem begins with the numbers 1740 ... Measured - 22 mb / s. On the laptop, the modem connected directly, about the same showed the modem. In general, at least 20MB this router can squeeze out of the ee, if of course the connection allows.

The next month I will test it in conjunction with a link 841. Let's look at stability.

[Non.I]

Does this router work with a static IP address?

[enpa]

Stable unofficial firmware version2.10.C.2.0-4 dated 01.15.2018for 4G KN-1210

Component kit

base
easyconfig
config-ap
ppp
corewireless
config-client
usb
pppoe
ydns
config-repeater
pptp
skydns
ppe
l2tp
dhcpd
dot1x
igmp
usbdsl
kabinet
miniupnpd
cloud
cloudcontrol
usbmodem
usbnet
pingcheck
usblte
trafficcontrol
ddns
nathelper-ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes

Version 2.10.C.2.0-4:

• Wi-Fi: Band Steering defaults to passive mode - without sending a forced DEAUTH client
  
• Wi-Fi: Fixed desynchronization of the Band Steering tables after the timeout expired, which led to the client being locked
  
• Wi-Fi: Fixed shutting down client isolation when adding an additional access point to a segment
  
• Wi-Fi: fixed the passage of multicast and broadcast packets between clients of one access point when isolation is turned on
  
• Wi-Fi: fixed a possible reason for blocking BBP with the termination of the distribution of beacons for 10-15 seconds

(c)https://forum.keenetic.net/

Keenetic 4G_KN-1210_2.10.C.2.0-4.bin.zip(6.56 MB)

Mirror:
cloud.mail - 2.10.C.2.0-4 Firmware Keenetic
yandex.disk - 2.10.C.2.0-4 Firmware Keenetic

[Acidjazzzy]

Hello! I want to buy this router.
Is it possible to configure a wi-fi network in it? Those. To log all traffic via Wi-Fi (what resources a child visits).
Very necessary! A matter of life and death ...

[enpa]

Official beta firmware version2.11.B.1.0-0 dated 02.22.2018for 4G KN-1210

Component kit

base
easyconfig
ppp
config-ap
corewireless
config-client
pppoe
ydns
usb
pptp
skydns
config-repeater
ppe
l2tp
dhcpd
dot1x
usbdsl
igmp
kabinet
miniupnpd
angular-ndw
cloud
cloudcontrol
usbmodem
usbnet
pingcheck
usblte
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
madwimax
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.B.1.0-0 (official beta *):

• Fixed deadlock in hw_nat when deleting PPP interface
  
• fixed bug with broken flow control on WAN MDI and SFP ports KN-1010
  
• Improved the performance of the ISP Giga III interface when the flow-control is disabled by the provider
  
• Fixed the operation of the E3272s-210 HiLink modem in RNDIS mode
  
• fixed PPTP GRE processing with ppe software enabled
  
• replaced the kernel network stack discipline from pfifo_fast to fq_codel (with BQL), providing minimal latency under load
  
• corrected session breaks in the DHCP client "rebind" handler
  
• Wi-Fi: Band Steering defaults to passive mode - without sending a forced DEAUTH client
  
• Wi-Fi: fixed WPS button operation with Band Steering
  
• Wi-Fi: Fixed desynchronization of the Band Steering tables after the timeout expired, which led to the client being locked
  
• Wi-Fi: Fixed shutting down client isolation when adding an additional access point to a segment
  
• Wi-Fi: fixed the passage of multicast and broadcast packets between clients of one access point when isolation is turned on
  
• Wi-Fi: fixed a possible reason for blocking BBP with the termination of the distribution of beacons for 10-15 seconds
  
• Wi-Fi: added display of open networks in site-survey (KN-1010)
  
• Wi-Fi: fixed reboot with double deletion of STA record, prone to Giga (KN-1010)
  
• Wi-Fi: fixed possible deadlock system, subject to Keenetic Giga III, Ultra II, Air, Extra
  
• Wi-Fi: fixed bug with 2-way / 4-way handshake (GTK / PTK), all mt7628 models are affected
  
• Wi-Fi: added Reason logging for DEAUTH and DEASSOC events
  
• DNS: Enables the use of provider's servers for non-filtered Yandex.DNS and Norton hosts.
  
• Netflow: fixed launch of flow-export on hotplug interfaces (reported by @feoser)
  
• Transmission: added ability to get Magnet links
  
• Web (beta): added CIFS and AFP setting
  
• Web (beta): added support for access point, adapter and repeater modes
  
• Web (beta): added segment management in access point mode
  
• Web (beta): English added
  
• Web (beta): fixed scrolling on high resolution screens
  
• Web (beta): added current status next to IPoE, PPP sections
  
• Web (beta): Added a list of 3G profiles in UsbModem connection settings
  
• Web (beta): added directory access control
  
• Web (beta): added support for 6in4 connections
  
• Web (beta): added support for Keenetic Plus DECT
  
• Web (beta): updated file browser component

* Officially released for Keenetic Giga (KN-1010), Start (KN-1110), 4G (KN-1210), Lite (KN-1310), Start II, Lite III rev.B, 4G III rev.B, Giga III , Ultra II, Air and Extra II.
Rebuilt into delta for Keenetic II, III, Giga II, Ultra, Lite II, Lite III, 4G III, Omni, Omni II, Viva, Extra, DSL, VOX and LTE.

(with)https://forum.keenetic.net/

Installation process and debug mode

1. Download firmware version 2.11.B.1.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.B.1.0-0 you have problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic 4G_KN-1210_2.11.B.1.0-0.bin.zip(7.11 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic

[Kehke]

3 weeks use. So far everything is stable. Yota, was able to squeeze 55 megabits.

[enpa]

Stable firmware version2.11.C.0.0-1 dated 03/05/2018for 4G KN-1210

Component kit

base
easyconfig
config-ap
ppp
corewireless
pppoe
usb
ydns
config-client
pptp
ppe
skydns
config-repeater
dhcpd
l2tp
usbdsl
igmp
dot1x
miniupnpd
kabinet
angular-ndw
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
ddns
nathelper-ftp
madwimax
nathelper-pptp
usbserial
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.C.0.0-1 (official release *):

• restored compatibility with NordVPN
  
• fixed change of priorities of connections at boot
  
• IPsec: improved connection stability, fixed removal of CHILD_SA
  
• CIFS: fixed buffer overflow and process restart when writing in large blocks
  
• CIFS: fixed Unix directory permissions
  
• CIFS: fixed calculation of the volume of network drives with long names
  
• CIFS: Fixed flags in NetBIOS Registration Requests
  
• CIFS: Keenetic NetBIOS detection fixed, for example, using NetBScanner
  
• CIFS: Fixed work with WD TV Live

* Officially released for Keenetic Giga (KN-1010), Start (KN-1110), 4G (KN-1210), Lite (KN-1310), Start II, Lite III rev.B, 4G III rev.B, Giga III , Ultra II, Air and Extra II.
(c)https://forum.keenetic.net/

Installation process and debug mode

1. Download firmware version 2.11.C.0.0-1
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.C.0.0-1 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic 4G_KN-1210_2.11.C.0.0-1.zip(7.11 MB)

Mirror:
cloud.mail - v2.04-v2.11 Firmware Keenetic
yandex.disk - v2.04-v2.11 Firmware Keenetic

[Iyudakov]

enpa,Hello, how to use TTL commit on the router?

[enpa]

IyudakovHello, there is information in the cap \ Useful information \ TTL fixation. And how to do? An example is described -here.

[renegat_nsk]

Good day,

A week ago, I purchased Keenetic 4G (KN-1210), works in tandem with a USB modem from Beeline, there are no wire providers. After the purchase, I updated the firmware but the latest version.
The problem is the following, after some time of inactivity (turned off the PC for the night for example) the Internet does not work, it is treated by rebooting Keenetic 4G on power.
Is this some kind of energy-saving feature in the settings or buggy firmware?

[Zver1000]

Hello! Dear experts please tell me who may be faced with this issue. The fact is that about 2 months ago, Keenetic 4G (KN-1210) was acquired together with a Huawei 3372h-153 USB modem with a SIM card Megaphone unlimited. Everything worked for about an excellent month, then some strange glitches were sent, their meaning is that the Internet is disconnected approximately 2-3 times a day. THOSE. The Wi-fi network itself is, that is, the Keenetic 4G (KN-1210) works, the status of the Huawei 3372h-153 USB modem (if you go to its web-face) is active. But there is no INTERNET at all until you restart the Huawei 3372h-153 USB modem itself, i.e., disconnect it from Keenetic 4G (KN-1210) and reinsert it into the USB port. As soon as an Internet procedure is performed, the Internet reappears and works for 2-3 days and then the problem repeats again.

In the screenshot, I traced the status of the USB modem Huawei 3372h-153 (RESERVATION). There is also a log file that I took with Keenetic 4G (KN-1210)log.txt(250.25 KB)
. The fact is that before this case I put several such kits and no one has any problems. Keenetic 4G (KN-1210) itself is configured in the easiest way.

Post has been editedenpa - 03.04.18, 14:34

[skalper]

Zver1000,
Ping Check on the router is enabled?
Highlink modem and webbord modem in a mobile connection ->Does auto shutdown mode always on?

[Ilya Khrupalov]

renegat_nsk,when next time there is no Internet, go to the web-kinetics kinetics and right on the first page press the circular arrow opposite the modem (if it will show itself). This will restart the modem (but not the kinetics). If the Internet appears, then, I hope, it is clear who is to blame. To prevent this from happening, it is advisable to enable / tweak pingchik in kinetics. If you do not understand, ask for the support of the kinetics, they will teach there.

Posted 04/04/2018 01:52:

Zver1000,state all this in support of the kinetics.

[enpa]

Stable firmware version2.11.C.1.0-2 dated 04.04.2018for KN-1210

Component kit

easyconfig
base
config-ap
ppp
corewireless
pppoe
config-client
ydns
usb
pptp
skydns
config-repeater
ppe
l2tp
dhcpd
usbdsl
igmp
dot1x
kabinet
miniupnpd
cloud
angular-ndw
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
ddns
nathelper-ftp
madwimax
nathelper-pptp
usbserial
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.C.1

Available for: Keenetic 4G III rev.B, Keenetic 4G (KN-1210),

New features and other improvements:

• Added support for Beeline ZTE MF833T USB modems; MegaFon MR150-5
• Fixed possible errors in the work of Internet Filters

(c)http://service.ndmsystems.com/

Installation process and debug mode

1. Download firmware version 2.11.C.1.0-2
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.C.1.0-2 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic 4G_KN-1210_2.11.C.1.0-2.zip(7.16 MB)

Mirror:
cloud.mail - v2.04-v2.11 Firmware Keenetic
yandex.disk - v2.04-v2.11 Firmware Keenetic

[genasi1]

Why does keenetic 1210 4g speed torrents? modem huawei 1506 axis win 7 pro 64

[enpa]

Stable firmware version2.11.C.1.0-3 dated 04.04.2018for KN-1210

Component kit

base
easyconfig
config-ap
ppp
corewireless
config-client
usb
ydns
pppoe
skydns
pptp
config-repeater
ppe
dhcpd
l2tp
usbdsl
igmp
dot1x
kabinet
miniupnpd
angular-ndw
cloud
cloudcontrol
usbmodem
usbnet
pingcheck
usblte
trafficcontrol
ddns
nathelper-ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.C.1.3

Available for: Keenetic Giga III, Keenetic Ultra II, Keenetic Extra II, Keenetic Giga (KN-1010), Keenetic Omni (KN-1410), Keenetic Extra (KN-1710), Keenetic Ultra (KN-1810), Keenetic 4G III rev.B, Keenetic 4G (KN-1210), Keenetic Start II, Keenetic Lite III rev.B, Keenetic Start (KN-1110), Keenetic Air, Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:

• Fixed a problem with access to local resources for domain names of the 4th level through the service KeenDNS
• Removed the "Debug version" banner in the beta version of the web interface

(c)http://service.ndmsystems.com/

Installation process and debug mode

1. Download firmware version 2.11.C.1.0-3
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.C.1.0-3 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic 4G_KN-1210_2.11.C.1.0-3.zip(7.17 MB)

Mirror:
cloud.mail - v2.04-v2.11 Firmware Keenetic
yandex.disk - v2.04-v2.11 Firmware Keenetic

[wasiluk]

Is it possible to make this router work with the printer via USB?

Post has been editedwasiluk - 20.04.18, 18:44