[X]Assistant

[xXxDarkGodxXx]

Tenda AC6- Discussion
wifirouter mifi: 2.4GHz (300Mbit \ s) - 5GHz (866Mbit \ s) | 3 • 100Mbit \ s | USB: No

The forum decided to post images under the spoiler

Description

The Tenda AC6 router will allow you to connect to the provider's network in order to “distribute” the Internet to the connected devices. It is distinguished by the support of Wi-Fi standard 5, the module operates in 2.4 GHz and 5 GHz frequencies, while the device supports operation in both bands simultaneously. With a frequency indicator of 5 GHz, the maximum connection speed will be 867 Mbit / s, so you can easily play or run demanding applications on all devices without slowdowns.
The processor with a frequency of 900 MHz, as well as 4 external removable antennas, which increase the coverage area of ​​Wi-Fi, are responsible for a stable and operational connection. 20 dBM - this is the transmitter power. Thanks to DHCP support, IP addresses are automatically assigned to network devices. For the security of the transmitted data in the Tenda AC6 is responsible demilitarized zone, which minimizes damage in the event of an attack on public services.

Additional Images

Specifications

Common parameters:
Type of
router

Model
Tenda AC6

Colour
the black

Internet connection (WAN)

Wireless Internet access
not

IPv6 support
not

Wi-Fi

Wi-Fi support
there is

Wi-Fi standards
802.11aСЃ, 802.11b / g / n

Frequency range of Wi-Fi module
2.4 GHz, 5 GHz

2.4 GHz maximum speed
300 Mbps

Maximum speed in frequency 5 GHz
867 Mbps

Simultaneous work in two ranges
there is

Transmitter power
20 dBM

Type and number of antennas
non-removable external x4

Antenna gain
5 dBi

Connection security
WPA, WPA2, WPA-PSK, WPA2-PSK

Ports

Number of LAN ports
3

Base data rate
100 Mbps

Number and type of USB ports
not

USB port features
not

Routing

DHCP support
there is

Static routing
there is

Dynamic DNS
there is

Security

Firewall
there is

NAT
there is

Demilitarized Zone (DMZ)
there is

Filtration
by MAC address, by IP address, by TCP / UDP, by URL

VPN

VPN features
VPN transit

Functions

Control

Web interface
Control from a smartphone (IOS, Android)

Additionally

Possibility of installation outdoors
not

Equipment

power supply, router, quick setup guide, Ethernet cable

Additional Information

WPS button

Dimensions Weight

Width
220 mm

Length / Depth
141 mm

Height
49.5 mm

Firmware

Differences between TD and RU / TRU firmware

Td- only Chinese and English,RU / TRU- there is a Russian language.

V.1

US_AC6V1.0BR_V15.03.4.10_multi_TD01.zip(6.31 MB)

US_AC6V1.0BR_V15.03.4.11_multi_TD01.zip(6.31 MB)

US_AC6V1.0BR_V15.03.4.15_multi_TD01.zip(6.32 MB)

US_AC6V1.0BR_V15.03.05.08_multi_RU01.zip(6.47 MB)

US_AC6V1.0BR_V15.03.05.16_multi_TD01.zip(6.46 MB)

US_AC6V1.0BR_V15.03.05.16_multi_TRU01.zip(6.47 MB)

US_AC6V1.0BR_V15.03.05.17_multi_TRU01.zip(6.49 MB)

US_AC6V1.0BR_V15.03.05.19_multi_TD01.zip(6.17 MB)

Beta V.1

ac6_kf_V15_03_05_17_8014__cn.zip(7.44 MB)

Beta_ac6_kf_V15.03.05.18 (8239 _) _ cn.zip(6.68 MB)

V.2

US_AC6V2.0RTL_V15.03.06.21_multi_TD01.zip(5.37 MB)

US_AC6V2.0RTL_V15.03.06.23_multi_TD01.zip(5.65 MB)

US_AC6V2.0RTL_V15.03.06.50_multi_TDE01.zip(5.83 MB)

V.3

US_AC6V3.0RTL_V02.03.01.09_cn.zip(1.13 MB)

V.4

US_AC6V4.0RTL_V02.03.01.26_cn.zip(1.08 MB)

Firmwares on the site / Russia /
Firmware on the site / China /
Custom firmware for this router NO.

Useful information

Instructions on firmware

1. Turn off the Internet. Press the Reset button and hold it (at least 5 seconds after switching on) to turn on the router.
2. Flash only by connecting the computer to the router with a cable to the RJ45 "LAN 1" connector. On the computer should be
active "Local Area Connection" with default settings (Auto).
Attention! You can not sew through Wi-Fi!
3. Start the browser "Internet Explorer" (recommended). Using the login "tendawifi.com" (without "") sign in
router management interface, open "system management" - "software upgrades" - click on "local upgrade", locate and select the previously downloaded firmware file with the extension "bin" and Click OK.
4. Be sure to wait until the update is complete. Do not turn off the power during the firmware process!
Stitch at your own risk.

Roll back firmware

To roll back the firmware of the router, you only need to flash a stable firmware over the beta or over the new firmware that you did not like.

Wi-Fi PC Adapters

Wi-Fi adapter NETIS WF2166 2.4GGts / 5GHz(worthxXxDarkGodxXx)
Wi-Fi adapter TP-LINK TL-WN881ND 2.4GHz

Overview and setup.
Differences v.1 (2016) and v.2 (2017)
We read before buying a device

Differences V.1, V.2, V.3 and V.4 by power supply

Problem solving

Overheating of the controller leads to a drop in speed
If the router periodically resets the speed.
We remove regional restrictions on old firmware
Is it hot? Replacing the radiator, example number 1
Is it hot? Replacing the radiator and installing a cooler, example number 2

IMPORTANT

In most cases, routers with AliExpress (even from warehouses in Russia)will have a weakened chip and will work with firmware in English or Russian with a large number of errors. This is due to the fact that Chinese in China make firmware in Chinese for themselves and put international ones for sale outside of China, if you have firmware with support for English or Russian on your device, the router will not be flashed with native firmware and will not work completely correctly . In addition, the firmware for the Russian Federation and Europe is designed for more powerful processors than the Chinese versions of devices and as a result, they simply gradually burn the chip as they try to get it to work at full load 100 percent of the time.TENDA - network equipment for home and office /vk.com/

The curator of the topic isA.r.c.h.e.r.

Post has been editedA.r.c.h.e.r. - 05.02.19, 02:29

[xXxDarkGodxXx]

The router is on its way so I can only say what is on the network about it.

[Advoc @ te]

The router tends to reset the incoming speed to 10 Mbps. To avoid this, it is necessary to turn off his a / b mode and leave only N and AC.

[keha1]

Advoc @ te @ 04.01.18, 15:27

a / b and leave only N and AC.

And where to look in the settings, just never set up, but today I received and assigned to a friend, entered the password from the provider and in the settings only the access point was turned on for both bands, ran a speed test and a pancake on the computer cuts absolutely no place, although I looked at the reviews works fine.

[Advoc @ te]

[email protected], 23:20

where to look in settings

I do not remember exactly. Somewhere in the settings of the wi-fi.

[Greenvood]

I bought a rhinestone 2 such: rofl: I cut down channel 2.4, left 5 GHz. The whole day the flight is normal.

[xXxDarkGodxXx]

GreenvoodAnd do you have all the devices initially supported 5 GHz?

[Greenvood]

xXxDarkGodxXx @ 01/08/2018, 17:39

GreenvoodAnd do you have all the devices initially supported 5 GHz?

Those that are probably connected yes, for no problem arose

[xXxDarkGodxXx]

GreenvoodHm
Can you name the average price range of your devices?

[Greenvood]

UPD: it feels like when the router heats up, the speed drops over the wifi, so at the beginning of work 100/100, but after some time 40-60 / 100 mbps ...

[xXxDarkGodxXx]

GreenvoodWhat did you hang on it?

Posted 08/01/2018 18:49:

GreenvoodTry to change the thermal paste or sticker that I do not know.
But you can attach a cooler for raspberry pi
In general, I'm not sure that it can be very hot
Holes many radiator is also not small.

[Greenvood]

xXxDarkGodxXx,
one laptop, 3 phones, I don’t think it’s serious ... I’ve already thought about the cooler, only xs where to turn it on ...

[xXxDarkGodxXx]

GreenvoodTake off the photo board

[keha1]

Advoc @ te @ 08.01.18, 00:34

I do not remember exactly.

Exhaustive and lucid :) but thanks anyway.

GreenVood @ 01/08/18, 18:43

that when heated router

Strangely, he didn’t notice the setting and testing absolutely for two hours, he was barely warm, felt by inertia because of his TV box and receiver, which during that time were already entering their normal mode 60-70 degrees

[Energe7]

Hi people! Can you please tell me whether to take this router! Will it have enough wi-fi power for 3 room apartment! Need for using 3 smart consoles, PC, and phones. There will be no problems when using several devices via Wi-fi and PC over LAN cable?

[xXxDarkGodxXx]

Energe7I live on the 6th floor in a three-room apartment signal beats right up to the bench.
And yes there is a benforming function in it, i.e. the signal goes not radius but is focused to the client. And yes he supports up to 25computersconnected to it simultaneously without losing speed.
There is nothing to say about consoles

Post has been editedxXxDarkGodxXx - 08.01.18, 22:45

Reason for editing:

[Energe7]

xXxDarkGodxXx,In general, I want it in return for the old Tp-Link WR740N which is not enough not as)) I like to play onlain games, but on the old router when the smart console and phones work, ping starts jumping, would there be such problems on this router?

[xXxDarkGodxXx]

Energe7I wrote that this router was originally designed for the load.

[Energe7]

xXxDarkGodxXx,
I looked in the reviews say that it is heated very much, is it worth paying attention to it or is it not critical?

[xXxDarkGodxXx]

Energe7, Not kretichno if you are not going to transfer gigabytes per second over the local network (joke)
If you can superstitious cooler from raspberry pi put

Posted 08/01/2018 23:09:

For your money (up to 2K) is no better.

[Greenvood]

Energe7,
do not stop thinking at all. Poised with the old bp from the computer and the cooler for cooling - the game is not worth the candle. The load on the provider has become lower and now the speed is 100/100. The piece of iron for the money (and above) just top! I recommend to anyone reading. : thank_you: