[X]Assistant

[olegan48]

DiscussionDigma Plane 7546S 3G
Digma Plane_7546S 3G, PS7158PG
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications

Screen diagonal 7 inches (17.78cm)
Resolution 1024x600
Matrix type ips
Screen resolution wsvga
Multitouch support
Processor spreadtrum sc7731 four nuclear
1.2GHz frequency
1GB RAM
8GB ROM (in fact, less space is occupied by the OS)
MicroSD support up to 64 GB
Android OS 7.0
Front Camera 0.3Mp
No rear camera
Bluetooth v4.0
WIFI 802.11b / g / n
3g support
The number of SIM cards 2
Built-in gps
Battery capacity 2400 mA
Black colour
Support otg after dancing with a tambourine

Photo

Useful

Regarding Win 10, if you do not install drivers, drive into the search: "Disable driver signature verification Win 10"
Digma site
Firmware

TWRP

new_twrp.img(13.41 MB)

Getting Root rights
Device Check Codes
Replacing a boot
Additional settings in System UI Tuner
Recovery firmware separately
Google Account Bypass (FRP) after Reset
If Spreadtrum_Tools_R20 when you open the firmware gives an error "image is damaged"

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedAlexanderL - 01.10.18, 09:27

Reason for editing: If Spreadtrum_Tools_R20 when opening the firmware gives an error "image is damaged"!

[olegan48]

Mig_44,
And what about the old tablet?

[Mig_44]

olegan48,
Prestigio GeoVision Tour 7795

[olegan48]

Mig_44,
I asked again and earned it before me, too, on the MTC was and sometimes gps also fell off the firmware helped

[Mig_44]

olegan48 @ 01.21.18, 21:31

Ask again

I tried the hard reset first, then the flashing.
Then all sorts of methods to restore the GPS, download the EPO, etc. and nifiga.

[olegan48]

Mig_44 @ 01.21.18, 18:22

"do not use while charging otherwise the battery will swell"

So you can also use without charging, but if you sit down to charge from the same car charger. There the charge current is only 1.5 amperes.

[Mig_44]

In the morning I rode in the car with the navigator for about 30 minutes, then the tablet just lay there.
I decided to connect to wifi, it was 30% of the charge, while I was picking up the network and began to enter the password, it became 0% and it went out.
Who as with power consumption?

[beldimas]

cwolo4 @ 27.12.17, 15:12

Hello everyone, I bought this gadget for my youngest daughter, and since she is only 2.5 years old, it’s not clear how the screen burst. ordered FPC-FC70S589-00 Touchscreen 7.0 "30 pin (104x184mm), got up like a native. Repair is simple, unscrewed 2 bolts and with a pick from a click, unfastened the cable latch in place. Heated the screen with a pick for a pick and removed.

I climbed on an Internet and found compatible touchscreens for Digma Plane 7546S 3G:

Explay Hit / Digma TT7007MG / Supra M727G / Explay S02 3G / Surfer 7.34 3G / Leader / Tornado 7 '/ Digma HIT 3G / Supra M725G / Prestigio P3038 / Prestigio Multipad Wize PMT3047 / Mystery MID-703G / TurboPad 721 / KingTop KT07

I also changed the touch, put Digma HIT 3G, it was perfect. Yes, and the cost of 126 rubles. On our tablet, our sensor price is 620-700 rubles.

Post has been editedbeldimas - 29.01.18, 00:14

[cwolo4]

Mig_44 @ 01.26.18, 08:29

In the morning I rode in the car with the navigator for about 30 minutes, then the tablet just lay there.
I decided to connect to wifi, it was 30% of the charge, while I was picking up the network and began to enter the password, it became 0% and it went out.
Who as with power consumption?

My daughter’s tablet, in the morning we remove from charging and it lasts until evening, though in the evening he already squeals what needs to be charged. It is necessary to try instead of the navigator it, maybe gps eats so

Posted 01/31/2018 01:30:

Beldimas @ 01.28.18, 23:51

I also changed the touch, put Digma HIT 3G, it was perfect. Yes, and the cost of 126 rubles.

Well, I get 450r for 3 days with home delivery, I’ve already changed 2 times, and I don’t even understand how she broke it a second time. I think now immediately order 5 pieces, so as not to spend money on delivery

Post has been editedcwolo4 - 31.01.18, 01:31

[Mig_44]

cwolo4,
Even just lying on the table in the "airplane" mode, the charge is spent.

[cwolo4]

Mig_44 @ 01/31/18, 06:40

Even just lying on the table in the "airplane" mode, the charge is spent.

Strange, my child does not let out during the day and the battery is normally consumed
See what kind of jamb with a tablet, maybe something with a battery or some kind of application constantly eats a battery?

[osy-78]

I turned off all Google services, the battery lasts about 6 hours.

[beldimas]

[email protected], 01:26

Well, I get 450r for 3 days with home delivery, I’ve already changed 2 times, and I don’t even understand how she broke it a second time. I think now immediately order 5 pieces, so as not to spend money on delivery

Where did you order?

[thirsty for death]

All good. Guys who faced Google binding on this tablet? How to untie, tell me

[osy-78]

All campaign faced. Something that you can disable in applications, such as services and the market. To completely clean out need root.

Post has been editedosy-78 - 05.02.18, 07:16

[warrkos]

Hello everyone, help solve the problem, after these actions, BetterBatteryStats (Post gaich # 53640479) rebooted the tablet and it no longer turns on, tried hard reset - the tablet does not respond. I downloaded the official firmware and UpgradeDownload - there is also no reaction. Is it possible to restore it somehow, preferably without disassembling it?

[warrkos]

It turned out to flash, it was necessary to clamp the reset button, both volume buttons and insert usb into the computer

[cwolo4]

[email protected], 19:12

Where did you order?

4ip.info

Posted 02/11/2018 01:01 AM:

Warrkos @ 10.02.18, 21:53

It turned out to flash, it was necessary to clamp the reset button, both volume buttons and insert usb into the computer

And I passed under the guarantee that they themselves understood why it does not turn on

[beldimas]

After replacing the wheelbarrow, everything worked fine, then the strip of millimeters 8 from the right edge (vertical) stopped obeying. The reinstallation (pulled out the inserted) of the loop helped, but not for a long time, after a few days the same problem again. dancing with a tambourine around the cable and connector did not give anything.
What is the reason? Touch set from Digma HIT 3G (https://taggsm.ru/inde..._200&product_id=25949)Possible marriage or breakage of the loop? Or something with a plug?

Post has been editedbeldimas - 11.02.18, 18:22

[cwolo4]

Beldimas @ 11.02.18, 18:21

After replacing the wheelbarrow, everything worked fine, then the strip of millimeters 8 from the right edge (vertical) stopped obeying. The reinstallation (pulled out the inserted) of the loop helped, but not for a long time, after a few days the same problem again. dancing with a tambourine around the cable and connector did not give anything.
What is the reason? Touch set from Digma HIT 3G (https://taggsm.ru/inde..._200&product_id=25949)Possible marriage or breakage of the loop? Or something with a plug?

problem with connector, it does not tightly press the cable, I have 2 tablets, on one I replaced the connector latch when I replaced it, I had to cut it out of the bottle, grind and fasten, there are no more bands that do not react

[beldimas]

Cwolo4 @ 12.02.18, 10:23

problem with connector, it doesn’t press tightly

The connector presses it seems to be quite good, I was advised to clean the tail of the wheel with a solvent, tomorrow I'll do it. If I don’t help, I’ll go for a new one, I’ll immediately check if it isn’t working in the store.