[X]Assistant

[5 [Strogino]]

Huawei Mate 9 / Mate 9 Pro - Firmware (Android OS 8.X)
MHA-L29, MHA-L09, MHA-AL00, LON-L29, LON-AL00
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Firmware (OS 8.X) пїЅ | Firmware (OS 7.X) пїЅ | Camera talk пїЅ | Unlocking Huawei & Honor Device Downloader пїЅ | Google Account Bypass (FRP) Ways After Reset | Themes for Huawei Emotion UI пїЅ

Important information!

Dual OTA on some firmware versions
One arrives update no others | HiCare official response

For those who use the programHuawei Firmware Finderto update the firmware:

Huawei made changes to the process of installing the firmware. Now the firmware passes the online check before installation. If you get an "authentication failure" when installing the firmware, then this firmware cannot be installed on this machine at the moment. You need to wait until your imei (and other data; no exact information) will be listed to receive this firmware, or make it "accessible to all."
For those who are readyunlock bootloader and reset to factory settings , there is means to install any stock firmware through pushing the update in the recovery.

Drivers and Utilities

• Huawei Firmware Finder - Search, download and install Huawei firmware.
  
• Huawei HiSuite - Utility for synchronization, backup and much more from Huawei (contains the ADB and MTP drivers)
  
• Huawei Update Extractor - Utility to unpack the original update package UPDATE.APP | Profile for Mate 9
  
• Huawei Multi-Tool - Utility from inside! out for firmware recovery, opening the bootloader, getting root rights, changing localization, models and other things
  

Official firmware

The following options for flashing the device are currently available:

• (Be sure to unlock the bootloader ) Installing any stock firmware through pushing the update in rekoveri - HwOTA 8
  
• Installing authorized Huawei stock firmware by pushing the update to the system update usingHuawei Firmware Finder - Instruction

Custom firmware

Modified firmware from KangVIP

Recovery / Root

• TWRP 3.2.1-0 with encryption support
  
• Preliminary TWRP 3.1.1-0 Recover (Some functions do not work)
  
• Ruth (SuperSU v2.82)

Instructions

• Update Android 8 to Android 8 and Rollback from Android 8 to 7
  
• How to install the firmware using Firmware Finder aka FF (video)
  
• Instructions for unpacking the firmware (file update.app), as well as unpacking specific .img files (thanks to svikfromorel from the Honor 6 branch)
  
• Inputs in different modes on the phone
  
• Using FunkyHuawei (as a last resort)
  
• Install magisk
  
• Installation magisk (video)
  

miscellanea

• Oeminfo collection for Android 7 (use under Android 8 is not recommended)
  
• Service Codes for Huawei Mate 9
  
• How to find out the exact location of the phone
  
• What are the locations and their territorial affiliation
  
• About google services
  

Post has been editedsnekt - 04.11.18, 17:46

Reason for editing: TWRP 3.2.1-0 with encryption support

[L.A.F.A]

wolfhound88, even considering the new settings on the Oreo? : blink:

[<<Wolfhound>>]

miklyaev, The telegram does not come to me exactly if you close it by accident. For the rest I do not know, I hold under the locks

[Overlord_084]

wolfhound88, unlimited access to data transmission - telegrams, put a tick?

[<<Wolfhound>>]

miklyaevnaturally

[serign1981]

Aric, I'm talking about YouTube for example in a separate window .. As in pixels�️

[Overlord_084]

serign1981,

[Aric]

miklyaev
These are two windows and not PIP, I did not manage to activate PIP.

[Overlord_084]

AricWhere to look for this pip?
ps Along the way, we haven’t delivered this chip yet ...

Post has been editedmiklyaev - 05.12.17, 17:28

[alexeei]

But I was pleased with the work time, it really became almost like in xiomi note 4 with 2g network, there was 10 hours of the screen, in mate 9 auto 3g / 2g network (in fact always 3g), auto brightness, hour of calls, without games, with disabled Gugloservisami, basically the browser, vatsap, telegrams and the like work, and with 100% now there are 60 left, with 4 hours of the screen. I don’t know how it will go further, on Android 7 it happened that after 50% faster the percentages went away, but there was a maximum of 7 hours of the screen with the same mode of use, then an increase of + 1.5-2 hours is clearly visible)
And another note, went from 7 android through FF, before, when changing versions of 7 android through HiCare, I blocked the whole loader and after unlock everything was formatted and reset to factory ones. Now, of course, because of the fact that it was updated via FF, although I installed the FullOTA firmware, the bootloader didn’t seem to be blocked (I tried to unlock it, but huawei multi tool gave an error, there was nothing to unlock) and root without reinstalling everything again, which is nice)

Addition after full discharge, everything is not as cool as it seemed initially, after 50% the percentages began to run faster, as a result, the total increase time was +1 hour, those 8 hours of the screen, 2 hours of calls for 2 days of work, with 2G / 3G and auto brightness, to Note 4, alas, did not reach, miracles do not happen)

Post has been editedalexeei - 07.12.17, 21:32

[gvaleks]

miklyaev, we launch a regular video player, open any file, we perceive, there is an icon in the upper right corner, we click and here it is a picture in a picture.

[Overlord_084]

gvaleksIn the regular player there is, in Yutyube not and in chrome there is no ...

[malah]

malah @ 5.12.17, 9:13

I installed 334 firmware, the screen lock label disappeared somewhere.
That is, the list is, but in fact not.

So also the new launcher has become, in some magical way, a system application ...

Post has been editedmalah - 06.12.17, 01:24

[kapitan27]

Hello to all.
The phone (C636B188) unlocked, downloaded the c636B360 firmware, I flashed the instructions from the header, at the end it gave an error, but the body started, firmware 8, oreo, but the name of the firmware remained the same as C636B188, although the firmware is different.
I tried to flash a new instruction for Oreo, flashed a new TvRP, put the files on the card, when flashing, TvRP flies, and the firmware does not change.
I tried to fill the C636 service, turned off the body, clamped 3 buttons, at the beginning of the download it issues software install failed
I do not know what to do next, help. I want to flash normally oreo
I planned to reset everything with the service firmware, and then flash it again to Oreo, so that without errors. With me +
Can be in lichku

Post has been editedkapitan27 - 06.12.17, 09:47

[<<Wolfhound>>]

kapitan27, Flash again, but through hwota for oreo. The link was somewhere in the subject

[kapitan27]

wolfhound88 @ 06.12.17, 10:16

Flash again, but through hwota for Oreo. The link was somewhere in the subject

I was just following the new instructions for Oreo

[<<Wolfhound>>]

kapitan27, then rollback through hisuite, and by new

[kapitan27]

wolfhound88 @ 06.12.17, 10:48

then roll back through hisuite, and on new

How did I find through hisuite, I did not find it in the cap

[<<Wolfhound>>]

kapitan27In the suite, everything is simple and clear in my opinion. Choose "update", then "other version", all

[kapitan27]

wolfhound88 @ 12.6.17, 10:52

In the suite everything is simple and clear in my opinion. Choose "update", then "other version", all

Some kind of nonsense, downloaded ove version of hisuite, clicked to update, you have the latest version, no "other version", no, absolutely no word.
downloaded the second version of hisuite same
What to do???

[<<Wolfhound>>]

kapitan27That is already worse ...
Then in order. What is the firmware now? Better with screenshots