HomTom HT16 - Firmware



Rep: (46)
HomTom HT16 - Firmware
PictureHT16
Description | Owners Club � | Discussion � | Modification and decorations � | Firmware �

Important information!
Drivers and Utilities
Firmware
Official firmware
Unofficial firmware
Recovery and root
Instructions
miscellanea

There is no curator in the subject. For questions about filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 18.10.19, 08:29
Reason for editing: lineage-14.1-20190625-UNOFFICIAL



Rep: (4)
steel-v @ 12/18/16, 23:32*
now have flown

Try it.


Moving to engineering, for this type * # * # 3646633 # * # *;
We are looking for the tab "Telephony" and then choose "GPRS";
Alternately, select SIM1 and SIM2, drive in IMEI and click "WRITE IMEI";
Reload the device and IMEI on the spot!

One more.

Go, select the tab «Connectivity», hereinafter «CDS Information», of the «Radio Information». You will see two items «Phone1» and «Phone2». In the first paragraph Phone1 established imei, in the second paragraph Phone2 established imei. Go to the first item Phone1, in the column «AT +» appends «EGMR = 1,7," YOUR IMEI1 "». As a result, it should get a line AT + EGMR = 1,7, "YOUR IMEI 1". During the press «END AT COMMAND». Go to point Phone2, in the column «AT +» appends «EGMR = 1,10," YOUR IMEI2 "». As a result, the line should get AT + EGMR = 1,10, "YOUR IMEI 2". During the press «END AT COMMAND». Exit the engineering menu and restart the smartphone.
https://www.youtube.com/watch?v=QZDp1BuE96U

Post has been editedMagnifikus - 19.12.16, 11:10
Reason for editing: In the header



Rep: (8)
* ginger, 74
In order not to overwrite user data. This is only an assumption.
Are there upgrad-a options without clearing user data?



Rep: (4)
Arlissa @ 12/19/16, 10:26*
Are there upgrad-a options without clearing user data?

Probably, I always tear off everything so that the old sores do not remain. Alternatively, backup to the cloud. Go, then come back.

Post has been editedginger 74 - 19.12.16, 08:31



Rep: (0)
I sew on a new 6.06 and test it in it. At first glance, it became visually darker somewhere.



Rep: (291)
I did not find it in the cap, I did not find it with a search either, so here is a present for you to NG

Unlink from Google account / FRP RESET


Download the attached file MT6580_Android_scatter.zip, unarchive where you want, run the SP Flash Tool, select the downloaded scatter file, go to the Format tab, select Manual Format Flash, fill in the windows as follows:
Begin adress0x4fa0000
Format lenght0x100000
Click Start,
We connect the switched off phone (it is possible without a battery), wait until the green window OK appears.
Turn on the phone and use. Happy New Year!

Attached files

Attached fileMT6580_Android_scatter.zip(1.12 KB)


Post has been editedNumberOne-1 - 16.01.17, 09:34
Reason for editing: In the header



Rep: (169)
v6.0.7
New firmware from the official sitehttp://www.homtom.cc/DownFilefrom 2016.12.22
Download: https: //drive.google.c...QNYndzQkVWN3Fmckk/view or https://yadi.sk/d/OuUYhTxc36t4mi
Attached Image
Attached Image
Attached Image

What's New: The firmware has become almost completely Russified. Finally, when connecting to a computer, you can go into the memory of the phone and flash drives. And the most important thing is now the percentage of the battery does not jump, as before. At least with me.
How to put root and twrp:https://www.youtube.com/watch?v=oQh6reK43hI


Post has been editedsanyok5050 - 05.02.17, 00:39



Rep: (0)
This is what I put today, it seems to be working.



Rep: (11)
onehalfxp @ 03.01.17, 21:12*
Yesterday I installed 6.0.7, through flash thuls, just did not remove the daw from the preloader, made the format and added them all, turned it on and they went, okay, after the purchase I made backups to nrav through twrp right after flashing through the flash I installed the recovery from the header and restored it area nravm, and put root, booted and this firmware immediately pleased

I reread the phone with formatting, I also did not remove the daw from the preloader. They flew off, but unlike smart people, there are no bumps to nrams (((
I tried to restore them from the utilities utility box (like chamelephone). The phone sometimes catches the network (even the operator’s sms called and came in) but not for long, then there is no signal and there are no networks available. After rebooting the phone, the network does not find at all (((
Can someone tell me how to cure?

Posted 04/01/2017, 17:23:

After installing the stock firmware (3 different), the stock recovery is never loaded. Is it just me so "gifted" or is it all so?



Rep: (0)
* Alexe23b , in the subject on FT in black in Russian it is written that it is not necessary to sew a preloader.
On recovery, everything works there, press volume up (or down) + power, a dead droid with an opened belly appears, then you need to press volume up (or down) + power again and you are in recovery. This is a double foolproof.

Post has been editedfreakapotamus - 04.01.17, 17:31
Reason for editing: completed the answer



Rep: (151)
Factory mode

Translation from Chinese to English

Patch for TWRP

Screenshot
Attached Image

Description : Test mode that appears when the buttons are held down Vol_Down + Power
Add. screenshots
Attached Image

Download : Attached fileFactory-Mode-English_x32.zip (665.33 KB)


Post has been editedAlexanderL - 13.03.17, 19:54
Reason for editing: In the header



Rep: (151)
Changed curtain and status bar (SystemUI)

Patch for TWRP

Edit SystemUI:removed large icons in front of network icons (3G, E, etc.), changed the background color of the curtain, corrected the translation, removed extra languages ​​(only RU, EN, UK were left)

Screenshots:
Attached Image
Attached Image

Old
Patch for firmware v6.0.8:
Attached fileSystemUI.zip(3.77 MB)

Attached fileSystemUI_6.1.0.zip(1.57 MB)

Attached fileSystemUI_HT16_v9.1.1.zip(1.09 MB)

Attached fileSystemUI_1.0.5.zip(1.09 MB)
- for firmware HT16_v1.0.5 from 20180115
Attached fileSystemUI_1.0.5_deodex.zip(1.92 MB)
- universal, for all firmware (deodexed)

Post has been editedKiev! - 06.02.18, 16:51
Reason for editing: In the header



Rep: (86)
* gruzdev_f,
The latest firmware is always on the off site.



Rep: (14)
* cat alien if she had always been there, there would be no questions, at the moment a link to the office is dead, I wrote technical support to them, but not the fact that they would fix it.

Post has been editedgruzdev_f - 29.03.17, 23:00



Rep: (47)
* gruzdev_f, Usually this happens before the appearance of a new firmware, so most likely it will be posted soon.
P.S. I hope at least the "Wireless Update" will be fixed. There and in the rest of the texts a lot of mistakes.



Rep: (0)
the site already has no firmware 6.0.1, either something happened, or one of the two

Feels like - after the previous one, with 6.0.1, the charge lasts longer



Rep: (21)
* drumbone , probably 6.1.0, but not 6.0.1



Rep: (14)
for cap:
TWRP firmware video and getting roothttps://www.youtube.com/watch?v=oQh6reK43hI

Post has been editedMagnifikus - 31.03.17, 12:43
Reason for editing: In the header



Rep: (2)
Restored IMEI on firmware 6.1.0 using Chamelephone program®Chamelephon

Post has been editedRaveboy - 03.04.17, 06:40
Reason for editing: In the header



Rep: (274)
TWRP 3.0.2-0

Gathered a normal multilingual TWRP

Attached fileRecoveryTWRP.zip(10.77 MB)



Rep: (274)
CyanogenMod 13

Port

Download


Post has been editedtribetmen - 13.04.17, 22:23
Reason for editing: In the header


Full version    

Help     rules

Time is now: 10/02/20, 22:28