Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Philips S337 - Firmware |
Message#1 22.04.16, 00:38 | |
Unknown [offline] Group: Friendssavagemessiahzine.com Messages 731 Check in: 12.12.15 Xiaomi Redmi Note 5 3/32 Reputation: 24 | Philips S337 - Firmware Philips S337 Description | Discussion � | Philips S337 Owners Club � | Firmware � Important information ATTENTION! Before asking a question, usesearch by topicandCAREFULLY study the topic header. In order to get an answer to your question,state it concretely and to the point, with a complete description of the problem. Before any manipulations with the phone (firmware, flashing, etc.)backup important data,as well as backup NVRAM (IMEI). Consider, if as a result of your hasty or unskillful actions you have done mischief, there will be no one to make a claim, except to yourself. All actions you do at your own peril and risk, neither the forum administration, nor the authors of the firmware (ports, instructions, or other materials) that are laid out in this topic, as well as no one or the other is responsible for your actions. All responsibility lies entirely on you. Drivers and Utilities DriverUpdated driver, now you do not need to disable the driver signature. Program for flashingS337 + ResearchDownload + tools.zip(4.85 MB) Adb and Fastboot driverUniversalAdbDriverSetup.msi(16.27 MB) Help! No drivers are installed! If you also have Windows 10, then you need to disable driver signature verification. To do this, go toStart menu-->System settings-->Update and Security-->Recovery-->Special reboot options and below will be the "Restart Now" button. After the reboot, there will be a menu in front of you. Farther:Diagnostics-->Extra options-->Boot options-->Reload. Next you will see a menu where you can select the download option, but press the number"7", your computer will restart already with the driver signature verification turned off. P.S On WinXp driver check is not performed! Firmware Official Updated posts with firmware Instructions Disable driver signature verification 100% Root rights to build V29 Another flashing instruction [Video tutorial on firmware] --- TWRP and FASTBOOT --- Twrp firmware via fastboot Switch to Fastboot mode SuperSu firmware via TWRP TWRP 3.1.1 firmware via fastboot Installing TWRP 2.8.7.0 without using a computer Instructions for installing TWRP recovery from a computer through the program ResearchDownload TWRP 3.1.1 Recovery and Kernels Stock recovery: Stock recovery miscellanea Firmware reviews Poll results While empty. Changes in the cap 06.10.18 Adding a section Recovery and Kernels Adding a section Poll results Adding a section Changes in the cap Transfer subsection Customizationin sectionmiscellanea Adding a subsection Fixesin sectionmiscellanea Remove obsolete links Adding a section Important information There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedrageentic - 06.10.18, 03:10 Reason for editing: Cap changed |
Message#2 28.04.16, 12:41 | |
Veteransavagemessiahzine.com [offline] Group: Friendssavagemessiahzine.com Messages 8895 Check in: 27.03.08 Meizu Pro 6 Plus 64GB Reputation: 3659 | S337 T7731K 1604 V19A RU - extreme factory firmware (I haven't sent newer ones yet) - the firmware manual is the same as forPhilips S307. Flash driver and drivers compatible with S337. - The only difference from the instructions for the S307: 7. Press and hold the BOTH volume buttons and, without releasing them, insert the battery. DOWNLOAD Post has been editedDOC2008 - 20.05.16, 15:19 -------------------- Philips S257 / E722G / TLE821L. Portable sound: Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900. |
Message#3 20.05.16, 15:07 | |
Veteransavagemessiahzine.com [offline] Group: Friendssavagemessiahzine.com Messages 8895 Check in: 27.03.08 Meizu Pro 6 Plus 64GB Reputation: 3659 | S337 T7731K 1620 V22A RU - they fixed the speakerphone (the microphone did not work in WhatsApp and Viber if you turn on the speakerphone) - fixed a problem with contacts - the firmware manual is the same as forPhilips S307. Flash driver and drivers compatible with S337. - The only difference from the instructions for the S307: 7. Press and hold the BOTH volume buttons and, without releasing them, insert the battery. DOWNLOAD Post has been editedDOC2008 - 20.05.16, 15:20 -------------------- Philips S257 / E722G / TLE821L. Portable sound: Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900. |
Message#4 31.07.16, 22:08 | |
Novice [offline] Group: Active users Messages 32 Check in: 21.08.10 Xiaomi Redmi 4 Prime Reputation: 0 | Found on the Internet. "Recommended programs for root-rights" 1) Framaroot 2) vRoot 3) Kingo Android Root + more 4) 360Root as Enotom wrote. You can add to the cap for the convenience of those in need. |
Message#5 14.09.16, 09:55 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 474 Check in: 08.10.11 Xiaomi Redmi Note 3 Standard Edition Reputation: 37 | I read here that for the appearance of cyan there is not enough TWRP or CWM ... :) Although I read that there is no such thing for the SC7731 processor ... also MIUI ... So I decided not to help much ... I propose to try to put TWRP 2.8.7.0. Themselves for the DEXP EL350 also did (characteristics are similar) -link Installation without using a computer. Butneed ROOT rights InstallFlashify When downloading the application, we provide ROOT Next, select the item "Image recovery" We point to the downloaded fileTWRP_s337.img(13.2 MB) We agree with the firmware Reboot into recovery (for verification) You can from the application I do not know exactly how you have it, but most likely to enter the recovery as well as on DEXP: To enter the recovery Turn off the machine. Hold down the power key and the volume key (+) The splash screen will appear - release the power key, hold the volume key (+) until the TWRP menu appears. Release the volume key (+) Bug:interface trembles Well, just in case, the stock recovery is also installed via Flashify -stock.img(9.84 MB) If Flashify fails, you can try to flash it through the computer. You do everything at your own peril and risk, no one except you is responsible. Post has been editedmr_striks - 14.09.16, 12:32 |
Message#6 29.09.16, 23:15 | |
匿å [offline] Group: Curators Messages 1232 Check in: 09.09.15 DEXP Ixion ML245 Electron Reputation: 92 | |
Message#7 29.09.16, 23:22 | |
匿å [offline] Group: Curators Messages 1232 Check in: 09.09.15 DEXP Ixion ML245 Electron Reputation: 92 | How and what files to fix bugs in ports on SC7731 I will leave here, it may be useful to someone Tyk The files themselves need to be taken.from drainPhilips S337. Posted on 09/29/2016, 23:26: There is also info that soon the CM 11 porting instructions will appear for the SC7731 processor. I can search for instructions from Indonesian romodels, and throw a translation here. Post has been editedMgalex - 08.10.16, 19:15 Reason for editing: In the header -------------------- |
Message#8 04.12.16, 17:57 | |
Veteransavagemessiahzine.com [offline] Group: Friendssavagemessiahzine.com Messages 8895 Check in: 27.03.08 Meizu Pro 6 Plus 64GB Reputation: 3659 | Instructions for installing TWRP recovery from a computer through the program ResearchDownload. 1. Download and unpack the archive with the program S337 ResearchDownload tools.zip 2. Download TWRP recovery (in the header) and rename it to recovery.img 3. Run ResearchDownload 4. press the leftmost button (button 1 in the screenshot) and select the factory firmware in * .pac format 5. after downloading the firmware to ResearchDownload, go to the \ S337 folder ResearchDownload tools \ Bin \ ImageFiles \ _DownloadFiles and replace the file recovery.img with the file from item 2 6. press the second button on the left (button 2 in the screenshot) and remove all the checkmarks from the firmware elements, except for the ones in the screenshot. 7. press the third button on the left (button 3 in the screenshot above) 8. turn off the smartphone and take out the battery 9. Connect USB cable to smartphone. 10. Hold down both volume buttons and, without releasing them, insert the battery 11. wait until the end of the firmware Getting root through TWRP - copy SuperSU-v2.78.zip to SD card - turn off the device. Hold down the power key and the volume key (+). a splash screen appears - release the power key, hold down the volume key (+) until the TWRP menu appears. release the volume key (+) - select Install and specify the path to SuperSU-v2.78.zip - wait for the installation and reboot Attached files S337 ResearchDownload tools.zip(4.85 MB) SuperSU-v2.78.zip(4.77 MB) Post has been editedvelikashkin - 04.12.16, 22:49 Reason for editing: In the header -------------------- Philips S257 / E722G / TLE821L. Portable sound: Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900. |
Message#9 14.12.16, 20:50 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 843 Check in: 16.05.15 Honor 8 Lite PRA-TL10 Reputation: 56 | deanamb, 1. Download the ResearchDownload_VER_2.9.7017 program as well as phone drivers: Spredtrum Drivers LATESTSpreadtrum DriversSCI-android-usb-driver-jungo-v4 Connect the phone and install the driver. 2. If you are afraid of breaking something with the firmware, then use the UpgradeDownload_R2.9.9005 program - it will set all the necessary settings for the firmware of your phone, you will only need to specify the firmware file you want to install in your phone. If you have already flashed the phone and are familiar with the ResearchDownload program, then use it. 3. Download the necessary firmware for your phone on the Spreadtrum platform. To determine the phone model, use the MTK Droid Root & Tools program. 4. Start ResearchDownload or UpgradeDownload using the gear button (Load Packet) to specify the file of the unpacked from the firmware archive that you want to download to your phone. 5. Remove the battery, SIM card and flashcard from your phone. Insert the microUSB cable into the phone, and in ResearchDownload or UpgradeDownload, click the button with the button Play (Start Downloading). Hold down the volume key on the phone and keep it pressed, insert the USB cable from the phone into the computer. Insert the battery into the phone. The phone will start flashing. Do not release the volume down button and do not pull the phone until you see a green inscription about the end of the firmware download to your phone. 6. When the firmware is finished, remove the microUSB cable from the phone, release the volume down button and turn on the phone (you may need to remove and insert the battery back into the phone). After some time, the phone will load and you will see the new firmware of the phone. Keep in mind that during the firmware your accounts, passwords and programs installed in the old firmware will be deleted from the phone. 7. If you want to flash the phone and not lose your data, then there is a way that allows you to do this, but it does not always work and it may happen that you still have to use the steps described and flash the phone completely with data loss. To do this, you need to use the program ResearchDownload. Using the gear button (Load Packet), select the firmware, then go to the button with two gears (Settings) and on the Main Page tab leave all the checkboxes except UserData. Click OK and then proceed as described in paragraphs 5-6. 8. If an error occurs in ResearchDownload during the firmware, for example Progress: Failed: Operation failed, then you need to specify the correct FDL files in the settings of the ResearchDownload program by clicking on the Settings button with two gears FDL files are downloaded to the phone in order to execute the ResearchDownload commands, the script for reading markup, runs FDL2 in accordance with its contents, If you do not know which pair of FDL files to use for your phone, then you can pick it up. For this, it is necessary that the mtdparts = sprd-nand line, written in FDL2, correspond with the markup line from the cmdline.info backup file (/ proc / cmdline). K Images should be hidden behind the spoiler. Post has been editedSlendy00880 - 17.10.17, 17:24 -------------------- Honor 8 lite PRA TL-10 ; Samsung Galaxy A6 (T285) |
Message#10 02.04.17, 16:59 | |
Veteransavagemessiahzine.com [offline] Group: Friendssavagemessiahzine.com Messages 8895 Check in: 27.03.08 Meizu Pro 6 Plus 64GB Reputation: 3659 | S337 T7731K 1712 V28A RU - Factory firmware for installation from a computer through the program UPGRADEDOWNLOAD - history of changes is unknown DOWNLOAD Post has been editedvelikashkin - 07.04.17, 11:35 Reason for editing: In the header -------------------- Philips S257 / E722G / TLE821L. Portable sound: Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900. |
Message#11 22.04.17, 12:29 | |
Veteransavagemessiahzine.com [offline] Group: Friendssavagemessiahzine.com Messages 8895 Check in: 27.03.08 Meizu Pro 6 Plus 64GB Reputation: 3659 | S337 T7731K 1717 V29A RU - official firmware for installation from a computer through the program UPGRADEDOWNLOAD - history of changes is unknown to me DOWNLOAD Post has been editedAlexanderL - 26.04.17, 20:07 Reason for editing: In the header -------------------- Philips S257 / E722G / TLE821L. Portable sound: Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900. |
Message#12 30.06.17, 23:25 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 515 Check in: 21.08.16 Xiaomi Mi A1 4/64 Reputation: 43 | Lewa_OS_Perfect_Edition About the firmware! The firmware is suitable for everyday use, there is a lack of translation, the market is working, wai and the network catches without any complaints. Use on health! : D https://mega.nz/#!stVz…9OJhMK6743rehCAfpm2LSU https://cloud.mail.ru/public/4RDg/TQ1ECg2Zy Post has been editedAlex2880 - 10.08.17, 16:53 Reason for editing: Link updated |
Message#13 05.07.17, 12:34 | |
Unknown [offline] Group: Friendssavagemessiahzine.com Messages 731 Check in: 12.12.15 Xiaomi Redmi Note 5 3/32 Reputation: 24 | If anyone is interested, go to fastboot mode by pressing and holding two buttons: power and volume down. Sequence: first, hold down the power button and then immediately hold down the volume down button PRESENT (you need to have time before the Philips logo appears). When the logo appears, then release the buttons and wait for the robot with the words "No command". increase the volume, after pressing to release. You should have a menu open and there find a reboot bootloader. Post has been editedMgalex - 05.07.17, 14:30 Reason for editing: In the header -------------------- |
Message#14 09.07.17, 18:54 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 515 Check in: 21.08.16 Xiaomi Mi A1 4/64 Reputation: 43 |
Bugs The camera does not work, it is possible to transfer via bluetooth, memory only one flash drive is visible, offline charging can something else. Works
DownloadMEGA A-GAPPS 6.0.1.zip(38.72 MB) Post has been editedAlex2880 - 10.07.17, 10:46 Reason for editing: Link |
Message#15 17.07.17, 02:31 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 515 Check in: 21.08.16 Xiaomi Mi A1 4/64 Reputation: 43 | CyanogenMod-12 Installation! Remove from the archive and put on the memory card in the folder TWRP / Backups / your folder where the backup is located. And restore with a wipe. +,- In general, for a whole day, yuzanya problems found these: does not switch to 3g, the proximity sensor does not work (press the button), if you put x-plore not from the store, then the bootlap (from the market everything is fine), like everything. Wifi works, both cameras, video also plays and writes. we will correct it by common means (I hope), I don’t have so much time yet. At work, my opinion has become more juicy. Linkhttps://mega.nz/#!M0MU…LibdoIZ1s-BkDT4BDW7WkY Post has been editedSlendy00880 - 03.10.17, 16:52 Reason for editing: In the header |
Message#16 22.07.17, 07:57 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 515 Check in: 21.08.16 Xiaomi Mi A1 4/64 Reputation: 43 | TWRP 3.1.1 TWRP_3.1.img(14 MB) Post has been editedAlexanderL - 24.07.17, 10:24 Reason for editing: In the header |
Message#17 12.08.17, 01:34 | |
Unknown [offline] Group: Friendssavagemessiahzine.com Messages 731 Check in: 12.12.15 Xiaomi Redmi Note 5 3/32 Reputation: 24 | CyanogenMod 13 (6.0.1) BETA-2 IMPORTANT BEFORE CARRYING OUT ACTIONS, MAKE A BACKUP SYSTEM! CM13 installation We take out the files from the archive and put it on the memory card in the Twrp / Backups / phone name / your folder. After restoring with wipe] Camera Fix Fix We download the archive and put it on the phone's memory card. Then install via "Install ZIP" Log Works Camera, WiFi, data transfer, calls, etc. Does not work Bluetooth does not work (I will soon screw it up), offline charging, does not see the Sd Card (the total commander sees the sd card, but when the phone is connected to the computer, the memory is determined as internal). While more bugs are not found. Download CM13 Download Patch Camera Download patch for bluetooth Soon Attached files GAPPS 6.0.zip(38.72 MB) Post has been editedrageentic - 26.04.18, 11:00 Reason for editing: In the header -------------------- |
Message#18 23.08.17, 15:44 | |
匿å [offline] Group: Curators Messages 1232 Check in: 09.09.15 DEXP Ixion ML245 Electron Reputation: 92 | I suggest adding reviews about firmware and found bugs. MIUI 8 (fake) About firmware A strange and rather crooked copy of MIUI, based on CM 12. Advantages and disadvantages + No bugs - All the firmware for some reason in the negative. Standard HTC Launcher. There is no Russian language. Post has been editedSlendy00880 - 17.10.17, 17:44 -------------------- |
Message#19 23.08.17, 15:50 | |
匿å [offline] Group: Curators Messages 1232 Check in: 09.09.15 DEXP Ixion ML245 Electron Reputation: 92 | For those who do not have a network in CM13. Achtung! This patch enlivens the Internet for only 1 SIM card. Download modem__16.04.zip(4.89 MB) Post has been editedvaalf - 28.11.17, 23:01 Reason for editing: Raised in the topic header -------------------- |
Message#20 26.08.17, 17:10 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 515 Check in: 21.08.16 Xiaomi Mi A1 4/64 Reputation: 43 | CM-13 with Android O interface https://yadi.sk/d/Eubcl9483MM7ii Post has been editedgrafom - 26.08.17, 21:54 Reason for editing: In the header |
Message#21 30.09.17, 15:53 | |
匿å [offline] Group: Curators Messages 1232 Check in: 09.09.15 DEXP Ixion ML245 Electron Reputation: 92 | Fluorine os Firmware with ARK Benefit S502 Plus Bugs for us • "Cursor" circle instead of sensor • Broken IMEI Installation Set as backup, you may need to replace boot.img with my backup from the header or from Mycell Aline (it will work fine) All screenshots and download link can be found here -ARK Benefit S502 Plus - Discussion (Post Spiridovov # 63326175) Post has been editedSlendy00880 - 01.10.17, 10:33 Reason for editing: Corrected -------------------- |
mobile version | Now: 07/05/19, 14:16 |