Vstarcam C24S 1080 P - Discussion | Swivel 1080p IP Camera with Wi-Fi, IR LED Vstarcam C24S
DiscussionVstarcam C24S 1080P (C8824 C82R)
Official site | Discussion пїЅ
CH-sys-48.53.203.95.zip(1.03 MB)
CH-sys-48.53.203.97.zip(1.03 MB)
CH-sys-48.53.203.98.zip(806.52 KB)
CH-sys-48.53.203.103.zip(844.53 KB)
CH-sys-48.53.203.104.zip(847.83 KB)
CH-sys-48.53.203.105.zip(888.35 KB)
CH-sys-48.53.203.109.zip(986.09 KB)
CH-sys-48.53.203.110.zip(899.79 KB)
CH-sys-48.53.203.111.zip(900.64 KB)
CH-sys-48.53.203.113.zip(895.18 KB)
CH-sys-48.53.203.115.zip(929.8 KB)
CH-sys-48.53.203.116.zip(941.75 KB)
CH-sys-48.53.203.117.zip(940.8 KB)
CH-sys-48.53.203.118.zip(1.02 MB)
CH-sys-48.53.203.119.zip(968.85 KB)
CH-sys-48.53.203.120.zip(1,003.76 KB)
CH-sys-48.53.203.123.zip(1010.76 KB)
CH-sys-48.53.203.125.zip(1,009.92 KB)
Web interface:
CH-app-EN203.8.1.10_VSTARCAM.zip(1.09 MB)
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the button
under the messages to which you want to add links.
Post has been editedAgrons - 20.06.19, 20:37
Official site | Discussion пїЅ
Description
Vstarcam C24S is a Vstarcam wireless PTZ IP camera with FullHD video quality (1920 x 1280 p), P2P, support for memory cards up to 128GB, and the ability to view from Apple and Android devices.
The Vstarcam C24S is easy to configure thanks to Sonic Transfer Convenient technology, PTZ horizontal and vertical rotation, IR illumination up to 10 meters, RJ-45 and WIFI lan connector, RTSP and Onvif protocols.
Recording to a Micro SD card up to 128GB takes place cyclically, old files are automatically erased and replaced with new ones.
It is possible to remotely access the memory card through the application.
The camera has a set of scenarios:
- record on the movement,
- scheduled recording
- recording by event.
The camera can transmit alarm messages to your phone, tablet, computer.
Vstarcam has a representative office in the Russian Federation.
The Vstarcam C24S is easy to configure thanks to Sonic Transfer Convenient technology, PTZ horizontal and vertical rotation, IR illumination up to 10 meters, RJ-45 and WIFI lan connector, RTSP and Onvif protocols.
Recording to a Micro SD card up to 128GB takes place cyclically, old files are automatically erased and replaced with new ones.
It is possible to remotely access the memory card through the application.
The camera has a set of scenarios:
- record on the movement,
- scheduled recording
- recording by event.
The camera can transmit alarm messages to your phone, tablet, computer.
Vstarcam has a representative office in the Russian Federation.
Specifications
Sources1 link 2 link
Maximum Resolution 1920x1280 (FHD)
The minimum operating temperature (В° C) -10 in the absence of humidity
Night IR illumination up to 10 meters
Remote steering is
Optical ZOOM no
Motion detector Yes
Image: 1 / 2.7inch 1080p Progressive Scan CMOS Sensor
Viewing Angle 4.0mm / 107.7 В°
Adjust video contrast, brightness, saturation, hue
Video stream (Bit rate) 128 ~ 4096 kbps
Audio input 1 channel internal microphone - 48 dB
Audio output internal speaker (8О©1W)
ADPCM / 32kbit / s audio compression
Record: Micro SD card up to 128 GB, class 10
Network: Ethernet (LAN) 10Base-T / 100Base-TX, RJ45 connector
Wi-Fi WiFi802.11b / g / n
Protocols TCP / IP, HTTP, TCP, UDP, DHCP, DNS, NTP, RTSP, P2P etc
No static IP address required
PTZ functions
Angle of rotation Horizontal: 355 В°, Vertical: 80 В°
Operating system Embedded Linux OS
Other characteristics
Power supply 5 V В± 5%
Weight 588 g.
Dimensions 196 * 165 * 138 mm
Processor Hisilicon Hi3518 ERBCV200
NAND Flash GigaDevice 25Q127CSIG
Maximum Resolution 1920x1280 (FHD)
The minimum operating temperature (В° C) -10 in the absence of humidity
Night IR illumination up to 10 meters
Remote steering is
Optical ZOOM no
Motion detector Yes
Image: 1 / 2.7inch 1080p Progressive Scan CMOS Sensor
Viewing Angle 4.0mm / 107.7 В°
Adjust video contrast, brightness, saturation, hue
Video stream (Bit rate) 128 ~ 4096 kbps
Audio input 1 channel internal microphone - 48 dB
Audio output internal speaker (8О©1W)
ADPCM / 32kbit / s audio compression
Record: Micro SD card up to 128 GB, class 10
Network: Ethernet (LAN) 10Base-T / 100Base-TX, RJ45 connector
Wi-Fi WiFi802.11b / g / n
Protocols TCP / IP, HTTP, TCP, UDP, DHCP, DNS, NTP, RTSP, P2P etc
No static IP address required
PTZ functions
Angle of rotation Horizontal: 355 В°, Vertical: 80 В°
Operating system Embedded Linux OS
Other characteristics
Power supply 5 V В± 5%
Weight 588 g.
Dimensions 196 * 165 * 138 mm
Processor Hisilicon Hi3518 ERBCV200
NAND Flash GigaDevice 25Q127CSIG
Photo
Equipment
1 x VStarcam IP Camera
1 x User Manual
1 x Power Adapter
1 x Network cable
1 x Camera Holder
4 x Screws
1 x User Manual
1 x Power Adapter
1 x Network cable
1 x Camera Holder
4 x Screws
Instructions
Firmware
CH-sys-48.53.203.95.zip(1.03 MB)CH-sys-48.53.203.97.zip(1.03 MB)CH-sys-48.53.203.98.zip(806.52 KB)CH-sys-48.53.203.103.zip(844.53 KB)CH-sys-48.53.203.104.zip(847.83 KB)CH-sys-48.53.203.105.zip(888.35 KB)CH-sys-48.53.203.109.zip(986.09 KB)CH-sys-48.53.203.110.zip(899.79 KB)CH-sys-48.53.203.111.zip(900.64 KB)CH-sys-48.53.203.113.zip(895.18 KB)CH-sys-48.53.203.115.zip(929.8 KB)CH-sys-48.53.203.116.zip(941.75 KB)CH-sys-48.53.203.117.zip(940.8 KB)CH-sys-48.53.203.118.zip(1.02 MB)CH-sys-48.53.203.119.zip(968.85 KB)CH-sys-48.53.203.120.zip(1,003.76 KB)CH-sys-48.53.203.123.zip(1010.76 KB)CH-sys-48.53.203.125.zip(1,009.92 KB)Web interface:
CH-app-EN203.8.1.10_VSTARCAM.zip(1.09 MB)Useful
Page on the website of the manufacturer C24S
Page on the website of the manufacturer C8824 C82R
VSTARCAM cameras demo center online
Default login / password: admin / 888888 (root / 123456)
Telnet access: login: vstarcam2015 passw: 20150602; root / 123456; vstarcam2017 / 20170912
Increase ftp by telnet: tcpsvd -vE 0.0.0.0 21 ftpd -w / &
Restore factory settings: Long press reset for 15 seconds
Page on the website of the manufacturer C8824 C82R
VSTARCAM cameras demo center online
Default login / password: admin / 888888 (root / 123456)
Telnet access: login: vstarcam2015 passw: 20150602; root / 123456; vstarcam2017 / 20170912
Increase ftp by telnet: tcpsvd -vE 0.0.0.0 21 ftpd -w / &
Restore factory settings: Long press reset for 15 seconds
Buy
Applications
Reference 1
Reference 2
Reference 3
Eye4 and Vscam in the Google store for Android (Download from the store). Applications from Shenzhen VStarcam Technology Co., Ltd.,
Reference 2
Reference 3
Eye4 and Vscam in the Google store for Android (Download from the store). Applications from Shenzhen VStarcam Technology Co., Ltd.,
- Before posting read the message Video section rules
- Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the button
under the messages to which you want to add links. Post has been editedAgrons - 20.06.19, 20:37
Reason for editing: firmware
The logical continuation of the IP cameraVstarcam c7824wip 720P
Post has been editedAgrons - 24.11.17, 01:13
Post has been editedAgrons - 24.11.17, 01:13
There are some differences in the characteristics of the camera, for example, weight, and on the same page of the official websiteVstarcam.
I’ll get it, I’ll figure it out
Talked with the Chinese, this is an old and new version
Post has been editedAgrons - 03.12.17, 19:24
I’ll get it, I’ll figure it out
Features 1
 |
Characteristics 2
 |
Talked with the Chinese, this is an old and new version
Post has been editedAgrons - 03.12.17, 19:24
The first acquaintance showed typical minor flaws:
- slight slowdown in 1080P mode
- an echo that grows into a howl when you turn on the microphone and camera speaker.
Satisfied with the purchase.
- slight slowdown in 1080P mode
- an echo that grows into a howl when you turn on the microphone and camera speaker.
Satisfied with the purchase.
And did anyone manage to "make friends" this camera with Surveillance Station?
And then I’ve been fighting for a couple of days and the point is zero :(
And then I’ve been fighting for a couple of days and the point is zero :(
Greetings
I can’t really configure the sending of notifications (photos) to the mail by alarm.
In the web interface, this item is not at all.
Delivered several programs: Eye4, IP Camera Super Client.
In IP Camera Super Client I found where you can prescribe mail settings. So while the program is running on the computer, notifications are sent. As soon as the program is closed, notifications are not sent. So conceived?
I can’t really configure the sending of notifications (photos) to the mail by alarm.
In the web interface, this item is not at all.
Delivered several programs: Eye4, IP Camera Super Client.
In IP Camera Super Client I found where you can prescribe mail settings. So while the program is running on the computer, notifications are sent. As soon as the program is closed, notifications are not sent. So conceived?
I have a 23S camera, the firmware is the same, just updated
I can’t connect it to the hikvision registrar and onvif device manager, it worked on old firmware, now an authorization error
direct link with login also does not roll
on the web muzzle comes in, there is a picture, all the rules
regik camera from another manufacturer finds and connects
18 cameras will go to the trash: D, I immediately told the client that they would not
I can’t connect it to the hikvision registrar and onvif device manager, it worked on old firmware, now an authorization error
direct link with login also does not roll
on the web muzzle comes in, there is a picture, all the rules
regik camera from another manufacturer finds and connects
18 cameras will go to the trash: D, I immediately told the client that they would not
For Vstarcam, fresh firmware does not mean the best.
They broke the telnet, they sent it to the post office in the “new” firmware.
Put the old ones in the hat.
Post has been editedAgrons - 22.04.18, 19:17
They broke the telnet, they sent it to the post office in the “new” firmware.
Put the old ones in the hat.
Post has been editedAgrons - 22.04.18, 19:17
Efirus @ 04/16/18, 10:59 PM
I can’t really configure the sending of notifications (photos) to the mail by alarm.
These are the "jambs" of the "new" firmware. Roll back.
As for sending to e-mail, in the settings you need to specify two addresses. This is an old Vstarcam bug.
Here are my settings for C7824WIP, but the essence is the same
 |
Agrons @ 04/22/18, 18:57
They broke the telnet, they sent it to the post office in the “new” firmware.
In the "new" firmware telnet control (on-off), done through cgi-requests - trans_cmd_string.cgi
For version CH-sys-48.53.75.113 - 0x00018410
Well, the management itself
Well, the management itself
Post has been editedGosudar - 22.04.18, 21:26
Gosudar @ 04/22/18, 9:20 PM
In the "new" firmware telnet control (on-off), done through cgi-requests - trans_cmd_string.cgi
Describe in detail how to use for uninitiated users, I will add to the header.
This C24S is equipped with NAND Flash from the manufacturer GigaDevice
It contains the camera firmware.
Marking on the chip itself in the camera:
Hj1733
25Q127CSIG
Post has been editedAgrons - 13.05.18, 10:50
It contains the camera firmware.
Marking on the chip itself in the camera:
Hj1733
25Q127CSIG
GD25Q127C - description on the manufacturer's website and datasheet
A photo
 |
Post has been editedAgrons - 13.05.18, 10:50
Tempero @ 07/13/18, 08:05
This is not an analogue of the C8824?
Based on the fact that the C8824 camera is not available on the manufacturer’s website, it is likely that under the name C8824 the C24S camera was sent to the post-Soviet market.
On my C8824 below on a sticker with the password and other it is indicated C82R.
Onlinehttp: //www.vstarcam.co...ome-IP-Camera-199.html
Compared to the C24S, it differs by the location of the microSD card slot. (on my back) and body color (black). In the tables, the parameters are the same.
Firmware 66.53.203.98
Web interface RU203.8.1.11
There are no telnet and mail in IE.
Onlinehttp: //www.vstarcam.co...ome-IP-Camera-199.html
Compared to the C24S, it differs by the location of the microSD card slot. (on my back) and body color (black). In the tables, the parameters are the same.
Firmware 66.53.203.98
Web interface RU203.8.1.11
There are no telnet and mail in IE.
Attached images
 |
Tempero @ 07/19/18, 13:02
Compared to the C24S, it differs by the location of the microSD card slot. (on my back) and body color (black)
Mine is also behind. This is a slot updated in the head.
The color of the case does not matter.
Your firmware starts at 66, i.e. for the CIS market.
48 - global sales.
The fourth group is the firmware version.
Web interface RU203.8.1.11 - Russian (you can put any other)
Only the second and third groups of numbers matter in the firmware, in our case * .53.203. *
If they match, then the cameras are the same.
Feel free to upload firmware from the header if necessary, they will do.
But if everything works fine and everything suits the camera, in vain do not just upgrade the firmware to the latest version.
By analogy with the C7824WIP camera, telnet and sending screenshots from the camera were disabled on the "latest firmware" there.
And, please, post the Russian web interface here, otherwise I only have English in the header.
You can also firmware. I'll also put it in a hat.
If you don’t know how, let me tell you.
Agrons, Thank you for the clarification! If I can gladly lay it out. Explain how.
Today in the morning I stopped recording on alarm on the card.
Response to brake commands until you lower the transmission bitrate.
Post has been editedTempero - 20.07.18, 11:45
Tempero @ 07/20/18, 12:44
Response to brake commands until you lower the transmission bitrate.
The Internet channel is apparently narrow. Bandwidth is not enough in some area.
Tempero @ 07/20/18, 12:44
If I can gladly lay it out. Explain how.
Web interface (simple option):
We govia ftp to the camera
On the way: / system / www copy the www directory to any place on the computer. This is the Web interface (in your case RU203.8.1.11).
Firmware:
Using a traffic sniffer (for example, WiresharkPortable), the path along which the camera downloads the firmware is scanned is remembered. for example
http://cd.gocam.so/FM/system/CH-sys-48.53.203.95.zip
On which site and which way is your firmware located, you must first find the sniffer.
Then this firmware can be downloaded manually via a direct link and share it on the forum.
Web interface (option 2):
As well as firmware, sniffer.
Post has been editedAgrons - 20.07.18, 13:06
Alas! No ftp, no telnet - Putty I already tried.
Wireshark used to scan a wifi network, but in Kali Linux.
I’ll probably see the camera as a device to sniff
Wireshark used to scan a wifi network, but in Kali Linux.
I’ll probably see the camera as a device to sniff
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement