[X]Assistant

[mr.dinu]

DiscussionNomi C070011 Corsa 2
Nomi Corsa 2, C070011
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications

Screen view
Capacitive
Screen diagonal
7"
RAM
1 GB
Wireless capabilities
Wi-Fi
Bluetooth
3G (UMTS)
operating system
Android 7.0
Internal memory
16 GB
Screen resolution
1280x800
Number of Cores
4
CPU
MediaTek MT8321 (1.3 GHz)
Rear camera
2 Mp
Navigation system
GPS
Matrix type
IPS
Front-camera
0.3 MP
Memory card support
microSD / microSDHC
Maximum capacity of memory cards
32 GB
Built-in 3G module
there is
SIM card dimensions
Ordinary
The ability to make calls
there is
Connectors
microUSB
3.5 mm plug
2 SIM card slots
Body material
Plastic + metal
Additional functions
OTG support
additional characteristics
GPS Navigation: GPS, A-GPS
Wi-Fi: 802.11 b / g / n
Bluetooth 4.0
Battery
2500 mAh battery
Width
107.5 mm
Height
186 mm
Depth
8.48 mm
Weight
265 g

Photo

Useful

TWRP 3.0.2 and Root
Firmware V14_20170830
Google Account Bypass (FRP)

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedAlexanderL - 17.08.18, 18:52

Reason for editing: Google Account Bypass (FRP)

[mr.dinu]

TWRP 3.0.2 download

Installation Instructions

Extract the contents of the archive to the root of the disk (any)
Launch SP Flash Tool version 5.1744.00.000 (you can downloadhere)
In the scatter-loading file field Select the previously extracted MT6580_Android_scatter.txt
Press the Download button, connect the switched off tablet to the computer (will offer to install the driver if it has not been previously installed) and wait for the firmware to finish

How to enter Recovery

To go into the recovery you need to hold and holdpower buttonandvolume +until a menu appears and selectRecovery Mode(Navigation through the menu is done with the buttonvolume +To select the desired menu item, clickvolume -)

Root

HERE

Download

Post has been editedmr.dinu - 23.11.17, 11:22

Reason for editing: In the header

[mr.dinu]

Drivers
Download

[AlexanderL]

M

Topic moved to subsectionOther brands

[piento]

Thank you -), now to wait for a cleaned drain, it would be generally excellent.

[mr.dinu]

piento
tomorrow I will lay out the firmware under the Flash tool and will do the cleaning of the drain

[piento]

Why does not want to sew a root. Error in the attached file. TVRP is fine stitched.

Post has been editedpiento - 22.11.17, 17:57

Reason for editing: Spoiler

[mr.dinu]

piento
sew firstMagisk-v14.3-171028, then Magisk_fix_new_for_v.14.0, and you, apparently, undertook to sew Magisk_fix_new_for_v.14.0 right away, from this and an error.
P.S. hide the image under the spoiler

Post has been editedmr.dinu - 22.11.17, 17:54

[piento]

mr.dinu
Shil in order, just photographed like this, try again.

Posted 11/22/2017 5:56 PM:

Here is:

Attached images

[mr.dinu]

piento
And you just installed TWRP? These archives can only be sewed through custom recovery (TWRP)

[mr.dinu]

piento
must be

So

[piento]

I guess where my mistake is.
First field, need to specify img file?
(download - agent - the second picture)
-----
Amendment, now I see that the recovery file itself is normally specified.
Then I do not know what's the matter. Showed that flashed.

Attached images

Post has been editedpiento - 22.11.17, 18:17

[mr.dinu]

piento
On the second screen, everything is correct, click the Download button (above) and connect the disabled tablet via usb. a red stripe should appear at the bottom, then a yellow one, at the end of the firmware a window with a tick will appear

[piento]

It turned out, thank you

Post has been editedpiento - 22.11.17, 18:43

[mr.dinu]

Roo methodt

Instruction

Download the archive and flash through TWRP.Do not forget about backup before any manipulations with the tablet
SR1-SuperSU-v2.82-SR1-20170608224931.zip(5.99 MB)

Post has been editedmr.dinu - 23.11.17, 11:23

[piento]

In the end, I flashed the device for the root, the second way. Thank.

Post has been editedpiento - 23.11.17, 01:46

Reason for editing: Correction

[mr.dinu]

Firmware forSP Flash Tool

Information

The firmware is made on the basis of a dump from my tablet.
Firmware versionNomi_C070011_V14_20170830

Instruction

Download the archive with the firmware and extract it to any place convenient to you (it is important that there are no folders with Russian names on the way to the firmware)
Launch SP Flash Tool
In the Scatter-loading File field, specify MT6580_Android_scatter.txt, which is located in the folder with the extracted firmware

It turns out so

Remove the checkbox in front of the preloader item (preloader stitching only as a last resort, if the tablet does not start without its firmware)

Press the Download button and plug the tablet off via USB cable
Install the driver (if necessary)
If the drivers are installed correctly, the firmware will go on (first red bar, then yellow)
The firmware process lasts for some time, at the end of the firmware a window will appear with a check mark
You can disconnect the tablet from the computer and turn it on.

ATTENTION! Unpacked firmware weighs 14.5 GB. This is due to the fact that it (firmware) is made from a dump, and the dump is an image of all sections of memory, and not a copy of their (sections) content.
The userdata.img file weighs 11.6 GB, its firmware will take a very long time, so in order to speed up the firmware process, you can not flash it (uncheck the userdata box)

If you do not flash the userdata section, then after the firmware is finished, you will need to load the tablet into Recovery (drain or custom, no difference) and make a Factory Reset, and only then boot into the system.

Download

SP Flash Tool
Drivers
Firmware

Post has been editedAlexanderL - 07.12.17, 11:12

Reason for editing: In the header

[rus1973]

I bought 2 such tablets for children. I hope the theme will evolve. Thank you!

[rus1973]

randomly chose the volume up + power Fast Fast mode now the tablet is hanging with this label and does not react to anything. how to be (I figured out there is a hole R with a needle tyk .. and everything is reset

Is it possible to install the firmware Resurrection Remix 5.7.3? with themes Nomi C070010 Corsa

Post has been editedrus1973 - 26.11.17, 14:40

[mr.dinu]

rus1973 @ 11.26.17, 1:05

Is it possible to install the firmware Resurrection Remix 5.7.3? with themes Nomi C070010 Corsa

No, there is Android 6 (core 3.18.19), we have Android 7 (core 3.18.35). As a normal build appears under our kernel, I’ll do porting.

[Citrus]

How is he at work (Internet, calls. Games are not interested.)
Are there any bugs?
How is the battery, how much does it hold on one charge?
Thank.

Post has been editedCitrus75 - 27.11.17, 14:02