Overclocking - the processor is not possible, but to appease its appetites where necessary - with the help of the XTU program
link to an explanatory post do at your own risk.
You can more easily configure it - with the Windows power management profile - you click on the battery in the system tray - parameters - additional parameters - processor state management.
Example , we put in the field "maximum processor state" - 99% of the processor's turbo-boost is turned off, this significantly reduces the temperature and the processor will become a little less "clever" (suitable for those who do not use heavy programs, for most games there is enough).
Overclock video card - GTX 10 series - it is possible and even necessary (again, the responsibility is on you), and how to do this can be viewed in this video ->
Youtube For convenience, you can prepare several frequency presets - graphs of the core, voltage and memory.
I have 3 profiles for 1050ti:
Minimum- for casual games and low-demand genres, frequencies 1240/7200 (core / memory) card consumption ~ 30W at 100% load of the core and memory controller
Average- for most games 1500 \ 7200 (core \ memory) ~ 39W with 100% load of the kernel and memory controller
Stable maximumfor those cases when you need more power ->1912 \ 9000 (core \ memory) ~ 54W at 100% load of the kernel and memory controller
In all 3 profilesA decrease in the voltage of the core set in the graph of the frequency-voltage ratio is also used in the overclocking guide following the link above.
The numbers are an example. , may differ because the quality of the assembly and the crystals themselves - different.
Overclocking the LDVS bus of the integrated monitor to 100Hz (DANGER) According to the method described in the message by the forum user, he achieved 100Hz
linkHardware optimization - For the most part, in a competent acceleration / deceleration of the video card, as well as processor power tweaking, there is 70% optimization of your laptop’s work, the remaining 30% is proper use and your experience.
According to my tests, after overclocking the video card and lowering the power supply of the CPU and GPU, it was possible to reduce the consumption of the impressive - 36 watts (it was 108 watts received 72 at maximum load), on average, this figure is nearing 60w.
FPS went up by 10-18%, and temperatures did not exceed 70-80 degrees, something like this can be achieved (competent care has not harmed anyone, the equipment is no exception: yes2 :) Enjoy !.
No need to bet extreme values ​​of acceleration \ lowering the voltage, when you only master these tools, start with a small step of frequencies and voltages, suddenly you are lucky and without excessive temperatures, you will get a bonus performance. And if you do not squeeze out all the juices, leave a small margin, then without consequences for the device, try !!! BUT gently take your time! :)