Hackintosh on PC - discussion | [macOS] Installation, methods and builds



Rep: (1983)
Hackintosh on the PC - discussion
The choice of components for macOS | 10.11 El Capitan | macOS Sierra 10.12 | macOS High Sierra 10.13 | macOS Mojave 10.14 | macOS 10.15 Catalina | Hackintosh on a PC - macOS Big Sur 11.0 Preview
Thin macOS customization | Mac OS Fans Club | Mac OS X software | Apple MacBook - general theme | Mac OS X talk |

Attached Image

BIOS setup
    UEFI bios:
  1. We reset all settings in default.
  2. AHCI - enable;
  3. Vt-d: Disable (+ in Clover drop DMAR table)
  4. Vt-x: Enable (only for 10.13 and if you use virtual machines)
  5. Intel Virtualization Technology - Enable
  6. Serial port: Disable
  7. XHCI Hand-off: Disable (recommended)
  8. XHCI Hand-off: Enabled (only if something is not working in Disable mode)
  9. IOAPIC 24-119 Entries: Enabled (it is noticed that many people panic with this item, so test it)
  10. CSM: Disable (if possible)
  11. Fasboot: Disable
  12. Secure boot: Disable or Other OS

    Legacy bios:
  13. AHCI: enable;
  14. HPET: enable;
  15. Vt-d: disable;
  16. ACPI Suspend Type - S3 (Only);
  17. No Execute memory - enable;
  18. USB Legacy - enable;
  19. Turning off all peripherals (webcam, smart, bluetooth whistles, card readers, etc.)

. ...
[i] Note:
  1. HDD must be connected to SATA-0, Intel controller.
  2. ... [/ i]

Installing macOS via Boot Disk Utility

To install, you will need a flash drive at least 8GB.
  1. PC on Windows XP / 7/8.
  2. Download Boot Disk Utility withcvad developer pagesor from the forum applelife.ru pagededicated to this utility.
  3. Set byinstructions
  4. Go to the USB flash drive in the EFI \ CLOVER \ folder and delete the OEM folder and the config-sample file(not to be confused with config.plist).
  5. Go tohttps://github.com/aci...pleSupportPkg/releasesdownloadApfsDriverLoader.efi and copy it to the EFI \ CLOVER \ drivers64UEFI folder (necessary for macOs 10.13 and higher!)
  6. Add to EFI \ CLOVER \ Kext \ Otherhttps://github.com/acidanthera/Lilu/releases
  7. Add to EFI \ CLOVER \ Kext \ Otherhttps://github.com/aci…WhateverGreen/releases
  8. Download the Mac OS X image from the links below:
    Click and download!
  9. Deploy the downloaded image to the prepared flash drive.
    1. Instructions from applelife.ru item"Filling the macOS distribution on the second volume of the bootable USB Flash drive:":
    2. Before unpacking the image, you must press ^ Format disk ^.
    3. In the main window of the program ->Destination Disk - choose our USB Flash Drive ->Part2.
    4. Click the "Restore Partition" button.
    5. In the opened window of the explorer select the unpacked file with the extension * .hfs.
  10. Those who install on a laptop(or has a PS / 2 mouse or keyboard), be sure to downloadAttached fileVoodooPS2Controller.kext.zip(97.46 KB)
    , a new version:Attached fileVoodooPS2Controller.kext.zip(93.86 KB)
    put in the folder EFI / CLOVER / KEXT / 10.X or Other
  11. Everything, the installation flash drive is ready, you can start the installation.


We thank cvad and Skvo for this installation method.
This instruction is written on materials from applelife.ru
After installation

Install one of the bootloaders to disk(if it is not included in the assembly):
- Loader в„–1 - Clover (recommended for most users) ;
How to do it: UEFI, Legacy bios.
- Loader в„–2 - OpenCore(for advanced users)
- Loader number 3 - Chameleon(currently exists for very old systems and special cases);
* install only one loader of your choice

After logging into macOS, the first thing we do:
  1. Install the kext for the network card;
  2. Configure SMbios;
  3. "Set up" a video card(the resolution must be correct, and the top line is transparent);
  4. Raise the processor's native power management;
  5. Sound up through AppleALC or VoodooHDA

...
21. We put programulaki and ryushechki.
Video, Sound, USB, Network, other:
CPU:
Video:
Sound:
Network:
USB:
MacAppStore and iCloud; iMessage and FaceTime:
Problem solving
useful links
  1. Intel factory Wi-Fi + Bluetooth (itlwm.kext / itlwmx.kext)
  2. Boot Disk Utility - creating a bootable flash drive from under Windows.
  3. Clover - download EFI downloader.
  4. Clover - discussion on applelife.ru
  5. HWmonitor - monitoring all system indicators | RehabMan HWmonitor | Discussion on applelife.ru.
  6. Kext Utility - Restore rights in the system, installing kekstov.
  7. Chameleon
  8. Driver base (kext) for Hackintosh
  9. Good foreign hackintosh forum (insanelymac)
  10. Compatible hardware wiki base (wiki.osx86project)
  11. The best forum on hackintosh (applelife.ru)
  12. Rutracker.org branch on poppies (retails, builds, software)
  13. Installing Mac OS X 10.9.2 - 10.10.3 on Lenovo A730
  14. Installing Clover on a hard drive for Legacy bios (old motherboards)
  15. Installing Clover on a hard disk for UEFI motherboards.
  16. DarwinDumper - utility to remove the full report on the system.
  17. Editors config.plist
  18. How to install kext on Mac OS X
  19. How to remove a kext on Mac OS X
  20. Changing disk partitioning from MBR to GPT without data loss
  21. How to convert a hard disk with Windows 10 installed from MBR to GPT without data loss!
  22. How to enable Dark Graphite mode in OS X 10.10 Yosemite
  23. How to enable USB Bluetooth on a CSR chip
  24. Mac OS X 10.8.5 Update on Mac OS X 10.9 Mavericks
  25. Method number 1 Activation of TRIM on SSD, fix "orange" icons in Clover | Method number 2
  26. Creating a flash drive to install Windows on a disk with Mac OS X
  27. Creating a bootable USB flash drive Mac OS X Mavericks or Yosemite with Clover bootloader
  28. Elan Touchpad Driver for laptops
  29. Create Legacy kext for Bluetooth
  30. Clover GUI Screenshots
  31. Key assignments(boot arguements)in Clover bootloader
  32. How to access the EFI section from Windows (clover is hiding here) on Mac OS
  33. Installing Mac Os X on Asus N / k / s Core I 3 \ 5 \ 7 Ivy Bridge laptops.
  34. Installing Windows and Mac on one hard drive
  35. Short description of the cases: FakeSMC.kext, AppleHDA.kext, etc.
  36. How to recover EFI partition HDD Mac OS X
  37. Collection of useful programs in one archive
  38. USB setting at 10.11
  39. Patches for macOS Sierra and SkyLake
  40. FakeSMC + HWSensors with Kaby Lake support \
  41. Install Mac OS X on the HP ProBook, Elitebook family of laptops
  42. We deploy macOS Sierra on Intel-PC in detail and clearly
  43. Creating a downloadable installer for macOS from apple.com
  44. How to take screenshots on a Mac computer
  45. Installing OS X on Haswell Pentium / Celeron
  46. Installing Hackintosh with a BDU and Recovery Image
  47. Fix for ICH10 with High Sierra
  48. Script for creating bootable Windows UEFI-flash drives from under macOS
  49. How to change the hardware data in the section "About This Mac" to any other
  50. Error solution Error loading kernel cache (0x1)
  51. Script for editing config.plist in EFI section from under Windows
  52. The patch for Intel HD 3000 and older NVIDIA Graphics macOS Catalina 10.15
  53. sensors for monitoring the program and iron out of VirtualSMC


Current builds:
Finished images macOS 10.10 - 10.15 + clover
macOS Sierra 10.12-10.14
OS X El Capitan 10.11
OS X Yosemite 10.10
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard
Clover Manuals Archive

Top Clover Manual Attached fileCloverHackyColor_rus_5114.pdf (4.66 MB)

Clover current release Picture
Settings, patches, fixes are entered into the EFI / CLOVER / file config.plist , need to edit this file by this .
In macOS, the VGA port does not work, you need to connect the monitor to DVI-D / HDMI / DP. There are exceptions for some models. On the Intel HD graphics, the VGA port does not work with any tricks!

When installing macOS, the presence of keys -v debug = 0x100 keepsyms = 1 is mandatory!
When installing macOS High Sierra and newer please addAPFS driverin Clover!


How to ask a question => Hackintosh on PC - discussion (Post ctich # 66244690)


Post has been editedWinSSLioN - 20.08.20, 13:53
Reason for editing: Program for monitoring sensors and iron from under VirtualSMC



Rep: (242)
Iron is very close to typical Khakintoshevsky. After installing kekstov everything should catch up.
Read the help and do as written there, and there will be happiness. In general, on this occasion it is better to use the forum on applelife.ru, rather than 4 pockets - there will be more confusion.

Post has been editedctich - 07.08.17, 16:11



Rep: (211)
Type in any search engineApple Mac OS X Leopard 10.5.2 (2008 / Kalyway / x86 / RUS) - you will be given a bunch of links, then burn to slowm fireOh, the speed of the disc and you load like a normal installation XP Yushi, everything is in Russian, you tick the boxes for your hardware - and you enjoy the beautiful, if you completely get into trouble, then you download the update to 10.5.3 separately! : victory:
Build a lot but fromKalyway - the simplest and most affordable ...
BUT!
In order not to overshadow your enjoyment, buy a separate hard drive, for 800 rubles, so that other sections with Windows will not suffer from your experiments, etc. ... because I myself do not understand how to do this - no boom boom. ..
And you have the same thing as iron, I have almost the same thing myself, except for vidyuhi, so there should be no doubt about compatibility - here you have "guessed" everything ... :)

Post has been editediBARBOSS - 19.07.08, 13:32



Rep: (242)
iBARBOSS 07/19/08 13:29:20
... burning slowlym fireoh speed the disc and ...

added: DVR-R (!!!), but not RW!
And, it is important that the drive does not disappoint (not everyone is coming)



Rep: (80)
In general, I downloaded and tried to install Jas & Leo 10.5.3 after a lot of torment with partinization, I installed it, but after rebooting it does not want to load, rebuild and that's it, climb on the forums and found that it happens quite often, but no method of solution helped me similar problem ...
Type in any Apple Mac OS X search engine Leopard 10.5.2 (2008 / Kalyway / x86 / RUS)

it is her already and I already shake, 2 gigas left download: wink_kind:
added: DVR-R (!!!), but not RW!
And, it is important that the drive does not disappoint (not everyone is coming)

I recorded the image just for rw there were no problems with the installation, I don’t think that the fact that the system doesn’t rise after installation is somehow related to a blank .. And what about drives, like, problems arise with IDE drives)
In general, on this occasion it is better to use the forum on applelife.ru, rather than 4 pockets - there will be more confusion.

I am just these forums and I use it, because there is nothing on this in our native forum ... But I hope we will fix this if I manage to get a Leopard abusingly write a short manual ..

P.S. I wore a little hat, I did not have 6750 percent, but 6550, but with him, it seems there should be no problems: victory:



Rep: (87)
felicita if at least Darwin gets there, then -v write and copy the error here



Rep: (80)
Moscow ,
I did it, it did not help ... But in general, I installed Macos ... Version Kalyway 10.5.2 stood up perfectly, the only thing that did not work the "out of box" network card, but I found it in the patch to my network card and now everything is fine it works, even the bluetooth dongle works) By the way, everywhere it is advised to disconnect the second "screw", I got up with both connected screws (1st Sata, 2nd IDE)

Post has been editedfelicita - 29.07.08, 11:18



Rep: (211)
Garbage, "everything" is - I have at all: 2SATA + 1 IDE , and sections on all of them - as many as 10 pieces ... :)
Everything works and Winda (and two) and the Mac Axis (Leo), all with each other are "friends", in a sense, and there and there they see sections and files of each other ...
I am glad that all you have got up, one "apple" - it became more ... :)



Rep: (80)
iBARBOSS ,
ATP, well, not yet quite a yabloko))) Bye Ubuntist



Rep: (156)
for what I don't like poppy - at least one unsupported device - deploy sneakers and paked!
M
The topic discusses the installation of the OS, rather than personal impressions of the system. Please - do not offtopic.


Post has been editedLenso - 07.10.08, 10:43



Rep: (230)
nikerossxp,
you ratherhere



Rep: (0)
hello everyone ... who tried to install haqintosh on a virtualbox? or can anyone know a gray screen and an apple in the center that I don’t undergo initialization? just want to look at trying and I’ve got two screws occupied by operating systems, and I decided to put it on the box. ...



Rep: (230)
And where did you get that you have a problem? The gray screen with an apple is a boot screen. Or is there then an error sign appears?

Post has been editede-ch! - 13.10.08, 19:25



Rep: (0)
Boys, and on what paw can you invest without any problems? And in general, can anyone of you know what kind of iron is in the macbook? if you know something more specific there. just then it can be assembled to order .. a bottle of the same parts as a poppy. : thank_you: thanks in advance
!
We breakForum Rulesp. 3.4. Verbal warning. Careful ...


Post has been editedJohnny P - 02.11.08, 10:29



Rep: (230)
there you need a mother without a BIOS, with open firmware, and so on apple.com you can see the config.



Rep: (13)
I have 2 computers with HB and laptop (ASUS EEEpc 1000h). Video of the laptop here:
_http://www.youtube.com/watch?v=wjcmR6C4fRU
and here
_http://www.youtube.com/watch?v=ZMQkZKLpuMw
Here is how to configure BIOS BB
_http://www.youtube.com/watch?v=hiCX9sxP3JA
Here what to choose during installation and the process itself (BB)
_http://www.youtube.com/watch?v=UHQ9dPEW8Rk
BB end result
_http://www.youtube.com/watch?v=5inzoY4GacI

BB:
Processor / installed Mac core: AMD Athlon 3200 + / netkas 9.4.0
Board / BIOS: Gigabyte GA-K8NSC-939 / stock
Video card / driver installed: Sapphire ATI Radeon X1650 PRO 256MB DeviceID: 71C6 / Atiinject + AGPGart
Installed separately drivers (after installing the system): Audigy 2 Sound drivers, Samsung ML-2015 Printer
Non-working devices after installing leopard: pinnaclle dc10 + video capture board
Installed assembly: JAS 10.4.8, Uphuck 10.4.9-10-11, Tubgirl 10.4.10, Kalyway Leopard 10.5.2 (updated to 10.5.5), Zephyroth AMD 10.5.1

Note:
TTX and so everyone knows ASUS EEEpc 1000h
Build Kalyway 10.5.2, updated with updates from the apple website
Non-working devices after installing leopard: Ethernet, sound (there are advances)

Post has been editedDrspawn - 21.11.08, 23:45



Rep: (230)
Drspawn
Thank you, added to the cap (albeit changed a little, but with reference to the original post) for the efforts keep +1!



Rep: (187)
The question is a bit off topic, but you probably know - is it possible to connect a Mac with a PC via FireWire? PC-PC works fine. I poke one of the ends on Mac - Wind says that I found a new device, there is no firewood for it.

Post has been editedCDK - 26.11.08, 14:32



Rep: (230)
from Mac to Mac also works fine, even the Internet distributes



Rep: (230)
By the way, if you already measure parrots, then I have in x-Bench 234.

CrazyBigCat,
Thank you so much and +1 for the information!



Rep: (6)
e-ch! @ 12/2/2008 8:50*
By the way, if you already measure parrots, then I have in x-Bench 234.

CrazyBigCat,
Thank you so much and +1 for the information!


: D Not at all ... And the parrots are so, for information, so that the people would find out what kind of performance they will get on the hardware (although it is synthetic, you can make up an idea).


Full version    

Help     rules

Time is now: 25/08/20, 9:19