2088 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Hackintosh on PC - discussion | [macOS] Installation, methods and builds
ctich
Message#1
02.10.08, 21:31
Guru
*********
[offline]

Group: Moderators
Messages 14796
Check in: 04.05.09
Apple iPhone 7

Reputation:-  1720  +

Hackintosh on the PC - discussion

Attached Image

BIOS setup
    UEFI bios:
  1. We reset all settings in default.
  2. AHCI - enable;
  3. Vt-d: Disable (+ in Clover drop DMAR table)
  4. Vt-d: Enable (only for 10.13 and if you are using virtual machines)
  5. Intel Virtualization Technology (for 10.13 is mandatory, otherwise the interface will be slowed down)
  6. Serial port: Disable
  7. XHCI Hand-off: Disable (recommended)
  8. XHCI Hand-off: Enabled (only if something is not working in Disable mode)
  9. IOAPIC 24-119 Entries: Enabled (it is noticed that many people panic with this item, so test it)
  10. CSM: Disable (if possible)
  11. Fasboot: Disable
  12. Secure boot: Disable or Other OS

    Legacy bios:
  13. AHCI: enable;
  14. HPET: enable;
  15. Vt-d: disable;
  16. ACPI Suspend Type - S3 (Only);
  17. No Execute memory - enable;
  18. USB Legacy - enable;
  19. Turning off all peripherals (webcam, smart, bluetooth whistles, card readers, etc.)

. ...
[i] Note:
  1. HDD must be connected to SATA-0, Intel controller.
  2. ... [/ i]

Installing macOS via Boot Disk Utility

To install, you will need a flash drive at least 8GB.
  1. PC on Windows XP / 7/8.
  2. Download Boot Disk Utility withcvad developer pagesor from the forum applelife.ru pagededicated to this utility.
  3. Set byinstructions
  4. Go to the USB flash drive in the EFI \ CLOVER \ folder and delete the OEM folder and the config-sample file(not to be confused with config.plist) .
  5. Go tohttps://github.com/aci...pleSupportPkg/releasesdownloadApfsDriverLoader.efi and copy it to the EFI \ CLOVER \ drivers64UEFI folder (necessary for macOs 10.13 and higher!)
  6. Add to EFI \ CLOVER \ Kext \ Otherhttps://github.com/acidanthera/Lilu/releases
  7. Add to EFI \ CLOVER \ Kext \ Otherhttps://github.com/aci…WhateverGreen/releases
  8. Download the Mac OS X image from the links below:
    Click and download!
  9. Deploy the downloaded image to the prepared flash drive.
    1. Instructions from applelife.ru item"Filling the macOS distribution on the second volume of the bootable USB Flash drive:":
    2. In the main window of the program ->Destination Disk - choose our USB Flash Drive ->Part2.
    3. Click the "Restore Partition" button.
    4. In the opened window of the explorer select the unpacked file with the extension * .hfs.
  10. Those who install on a laptop(or has a PS / 2 mouse or keyboard), be sure to downloadAttached fileVoodooPS2Controller.kext.zip(97.46 KB)
    , a new version:Attached fileVoodooPS2Controller.kext.zip(93.86 KB)
    put in the folder EFI / CLOVER / KEXT / 10.X or Other
  11. Everything, the installation flash drive is ready, you can start the installation.


We thank cvad and Skvo for this installation method.
This instruction is written on materials from applelife.ru
After installation

Install one of the bootloaders to disk(if it is not included in the assembly):
- Loader в„–1 - Clover (recommended) ;
How to do it: UEFI, Legacy bios.
- Loader # 2 - Chameleon(currently exists for very old systems and special cases);
* install only one loader of your choice

After logging into macOS, the first thing we do:
  1. Install the kext for the network card;
  2. Configure SMbios;
  3. "Set up" a video card(the resolution must be correct, and the top line is transparent);
  4. Raise the processor's native power management;
  5. Sound up through AppleALC or VoodooHDA

...
21. We put programulaki and ryushechki.
Video, Sound, USB, Network, other:
CPU:
Video:
Sound:
Network:
USB:
MacAppStore and iCloud; iMessage and FaceTime:
Problem solving
useful links
  1. Boot Disk Utility - creating a bootable flash drive from under Windows.
  2. Clover - download EFI downloader.
  3. Clover - discussion on applelife.ru
  4. HWmonitor - monitoring all system indicators | hwsensors | Discussion on applelife.ru.
  5. Kext Utility - Restore rights in the system, installing kekstov.
  6. Chameleon
  7. Driver base (kext) for Hackintosh
  8. Good foreign hackintosh forum (insanelymac)
  9. Compatible hardware wiki base (wiki.osx86project)
  10. The best forum on hackintosh (applelife.ru)
  11. Rutracker.org branch on poppies (retails, builds, software)
  12. Installing Mac OS X 10.9.2 - 10.10.3 on Lenovo A730
  13. Installing Clover on a hard drive for Legacy bios (old motherboards)
  14. Installing Clover on a hard disk for UEFI motherboards.
  15. DarwinDumper - utility to remove the full report on the system.
  16. Editors config.plist
  17. How to install kext on Mac OS X
  18. How to remove a kext on Mac OS X
  19. Changing disk partitioning from MBR to GPT without data loss
  20. How to convert a hard disk with Windows 10 installed from MBR to GPT without data loss!
  21. How to enable Dark Graphite mode in OS X 10.10 Yosemite
  22. How to enable USB Bluetooth on a CSR chip
  23. Mac OS X 10.8.5 Update on Mac OS X 10.9 Mavericks
  24. Method number 1 Activation of TRIM on SSD, fix "orange" icons in Clover | Method number 2
  25. Creating a flash drive to install Windows on a disk with Mac OS X
  26. Creating a bootable USB flash drive Mac OS X Mavericks or Yosemite with Clover bootloader
  27. Elan Touchpad Driver for laptops
  28. Create Legacy kext for Bluetooth
  29. Clover GUI Screenshots
  30. Key assignments(boot arguements)in Clover bootloader
  31. How to access the EFI section from Windows (clover is hiding here) on Mac OS
  32. Installing Mac Os X on Asus N / k / s Core I 3 \ 5 \ 7 Ivy Bridge laptops.
  33. Installing Windows and Mac on one hard drive
  34. Short description of the cases: FakeSMC.kext, AppleHDA.kext, etc.
  35. How to recover EFI partition HDD Mac OS X
  36. Collection of useful programs in one archive
  37. USB setting at 10.11
  38. Patches for macOS Sierra and SkyLake
  39. FakeSMC + HWSensors with Kaby Lake support \
  40. Install Mac OS X on the HP ProBook, Elitebook family of laptops
  41. We deploy macOS Sierra on Intel-PC in detail and clearly
  42. Creating a downloadable installer for macOS from apple.com
  43. How to take screenshots on a Mac computer
  44. Installing OS X on Haswell Pentium / Celeron
  45. Installing Hackintosh with a BDU and Recovery Image
  46. Fix for ICH10 with High Sierra
  47. Script for creating bootable Windows UEFI-flash drives from under macOS
  48. How to change the hardware data in the section "About This Mac" to any other
  49. Error solution Error loading kernel cache (0x1)
  50. Script for editing config.plist in EFI section from under Windows


Current builds:
macOS Sierra 10.12-10.14
OS X El Capitan 10.11
OS X Yosemite 10.10
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard
How to ask a question

When asking a question please indicate:
Processor: Intel i7 4770;
Motherboard: GA-Z87-DH3;
Video card: NV GTX660;
Loader:
Clover - 4011;
Chameleon - 2258;

MacOS version;
Attach a screen with a problem and hide it under the spoiler.
If you want help with this topic,highly recommended enter the description of the components in signature : (example: Processor / Motherboard / Video Card / Bootloader).
[b] Processor: [/ b] | [b] Motherboard: [/ b] | [b] Video card: [/ b] | [b] OS version and bootloader: [/ b]
[spoiler = problem screenshots] Attach screenshots or photos here [/ spoiler]

Clover manuals
Manual Clover ==>> Attached fileKlever_cveta_xaki_3545.zip (4.18 MB)

Manual Clover ==>> Attached fileKlever_cveta_xaki_4000.zip (3.77 MB)

Manual Clover ==>> Attached fileKlever_cveta_xaki_4244.pdf.zip (3.72 MB)

Attached fileClover khaki 4415.zip(3.68 MB)

Attached fileClover khaki 4450.pdf(4.05 MB)

Attached file431566_Klever_cveta_xaki_4542.pdf(4.33 MB)

Top Clover Manual Attached fileClover khaki 4871.zip (11.6 MB)

Clover current release Picture
Settings, patches, fixes are entered into the EFI / CLOVER / file config.plist , need to edit this file by this .
In macOS, the VGA port does not work, you need to connect the monitor to DVI-D / HDMI / DP. There are exceptions for some models. On the Intel HD graphics, the VGA port does not work with any tricks!

When installing macOS, the presence of keys -v debug = 0x100 keepsyms = 1 is mandatory!
When installing macOS High Sierra and newer, you must addAPFS driverin Clover!

K
The main rule / requirement of the topic: if you want help / advice - fill in your signature, indicating:
Processor | Motherboard | Video Card | OS X version | Loader.
Without a signature, all messages are deleted.


Post has been editedctich - 09.04.19, 16:15
Reason for editing: Script for editing config.plist in EFI section from under Windows
slimest
Message#22
07.12.08, 16:49
grandfather
*********
[offline]

Group: Honorary Gameday
Messages 7966
Check in: 22.04.06
Samsung Galaxy Tab S2 SM-T715

Reputation:-  1698  +

iPryanik,
you made me happy ... I just don’t need WiFi, because I’m clinging a computer over a twisted pair, but I was strained by the lack of Intel’s compatible network cards in the list. Or did I look at something?


--------------------
Regards, slimest
e-ch!
Message#23
07.12.08, 19:03
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1685
Check in: 10.12.05
Apple iPhone 6s Plus

Reputation:-  228  +

slimest
if you have USB hard you can try to install on it, and if you don’t start something you’ll lose it, I advise you to install the latest ideneb (v1.3 - OSX 10.5.5) - there seem to be more drivers in it than in previous builds of hackintoshs.


--------------------
And the drive does not know which file was the end ...
slimest
Message#24
07.12.08, 23:16
grandfather
*********
[offline]

Group: Honorary Gameday
Messages 7966
Check in: 22.04.06
Samsung Galaxy Tab S2 SM-T715

Reputation:-  1698  +

e-ch! @ 12.12.2008, 19:03*
if there is a USB hard you can try to put on it, and if something necessary does not start, then you will not lose anything

My friend, there is a USB drive. But, as I understand it, the system is placed on a specific partition and the entire physical disk does not beat, right? For rollback, in which case, I always have backups of OSes made by Norton Ghost.
Thank you very much for the thread you created. If it were not for her, I would not have hemorrhoids with a new axis: D You described everything so great and tasty that only completely indifferent will pass by :)


--------------------
Regards, slimest
iPryanik
Message#25
08.12.08, 06:36
Vanilla bear
********
[offline]

Group: Honorary Gameday
Messages 1608
Check in: 07.11.07
Apple iPhone 6s Plus

Reputation:-  155  +

slimest
I put on a separate hard, that would not risk it. The system formats it in Mac OS Extended (journal)


--------------------
Just believe!
slimest
Message#26
08.12.08, 21:17
grandfather
*********
[offline]

Group: Honorary Gameday
Messages 7966
Check in: 22.04.06
Samsung Galaxy Tab S2 SM-T715

Reputation:-  1698  +

So I did not manage to put Hackintosh on my Sonya ... I used the recommended distribution kit - the latest ideneb. When loading the message takes off - waiting for boot volume. Googled - Duc all start with the fact that you need to change the access to the disks to ACHI, and I have only two and a half lines in the BIOS, except for monitoring the fans and changing the priority of the boot devices :) I tried using the rd = diskX command - unsuccessfully ... Well, a negative result is also a result.
For reference, the Sony Vaio VGC-LN1MR computer.


--------------------
Regards, slimest
e-ch!
Message#27
08.12.08, 23:09
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1685
Check in: 10.12.05
Apple iPhone 6s Plus

Reputation:-  228  +

slimest
Well, I sympathize, bios in the laptops is really for a tick.


--------------------
And the drive does not know which file was the end ...
slimest
Message#28
09.12.08, 13:02
grandfather
*********
[offline]

Group: Honorary Gameday
Messages 7966
Check in: 22.04.06
Samsung Galaxy Tab S2 SM-T715

Reputation:-  1698  +

e-ch! @ 12/8/2008, 23:09*
in in really for a tick.

My situation is worse - this is not a laptop, but a candy bar, such as a multimedia center, for housewives. Even if I put up all the horns and put a mac-axis, still some of the very tasty multimedia functions of this computer will not work.
By the way, I tried to install the operating system on both the built-in screw and the USB stick.


--------------------
Regards, slimest
e-ch!
Message#29
09.12.08, 14:51
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1685
Check in: 10.12.05
Apple iPhone 6s Plus

Reputation:-  228  +

slimest
understood: aimak from sony, if not secret, why did he attract you like that, compared to the same aimag 24?


--------------------
And the drive does not know which file was the end ...
slimest
Message#30
09.12.08, 17:08
grandfather
*********
[offline]

Group: Honorary Gameday
Messages 7966
Check in: 22.04.06
Samsung Galaxy Tab S2 SM-T715

Reputation:-  1698  +

e-Ch !,
I apologize for the small offtop, but since I was asked: when I recently chose a new computer for myself, my requirements were: a monoblock and a high-quality monitor on it. At first, I just came to the salon selling poppies, and it seemed I even picked up a model, but then, going to a similar salon, but selling Sonya, I chose the last one, because the drive is larger in size, more memory is used, the processor is more fun smaller, better built-in sound (IMO). And remote control on Sonya more functional. Again, reads Blue-Rey :)
In addition - well, I bought a poppy, everything works, nothing special can be changed ... But what about the struggle, new achievements, etc.? ;) Boring ...
A 24 inch monitor is too big for me. Everything rests on the distance to it.

In principle, now, while I have no productive thoughts, what can I do to install MacOS on my computer, but oh well, I’ll google it, read the opinions of the authorities, you see - it will be established ..


--------------------
Regards, slimest
Yasha!
Message#31
10.12.08, 07:28
Guru
*********
[offline]

Group: Honorary Gameday
Messages 2253
Check in: 27.03.07
Xiaomi Mi Mix 2 Ceramic

Reputation:-  673  +

On a gray background, the apple icon hangs for a while, then a circle appears in the apple on top of it: wacko:. The installation does not move any further what could be the matter? : blink:
My iron. : kindness:: spiteful:
Prots - Core 2 Duo E8500 3.16 GHz
Mother: Asus P5QL
Video Card: Nvidia 8600 GT
Operatiff: 4 gb ddr2
: girl_wacko:


--------------------
slimest
Message#32
10.12.08, 18:12
grandfather
*********
[offline]

Group: Honorary Gameday
Messages 7966
Check in: 22.04.06
Samsung Galaxy Tab S2 SM-T715

Reputation:-  1698  +

Yasha !,
it is described literally a few lines above. When the download starts, press F8
Installing Hackintosh on a PC (Post # 2190368)


--------------------
Regards, slimest
Anathema
Message#33
10.12.08, 18:39
santtiaga
*********
[offline]

Group: Honorary Gameday
Messages 5415
Check in: 25.04.06
Apple iPhone Xs Max

Reputation:-  459  +

Anathema
CPUIntel Core 2 Duo E6300
Board / BIOS: ASUS 5LD2 SE
Video card / driver installed: nvidia geForce 7600 GT / NVinject 256
Sound / Driver: 1986A
Network: Realtek
Installed assembly: iDeneb v1.3 10.5.5 (kernel 9.5 Voodoo RC)
Ethernet, sound work.
Sometimes I get kernel Panic, after restart bt-keyboard and settings of Logitech Revolution mouse fall off.


MSI Wind U100, 2Gb, 80Gb
CPUIntel Atom Z270 / SpeedStep 800MHz ~ 1600MHz (works through GenericCPUPMControl)
Wifi:RTL8187SE works through the office. firewood
Sound / Driver: speakers and headphones work (via CHUD and Audieee4Wind)
Installed assembly: OSXWind 10.5.4 (kernel 9.5)
Video card / driver installed: GMA 950 (keep native resolution)

Post has been editedAnathema - 11.12.08, 10:17
angel-4d
Message#34
11.12.08, 22:14
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 11.12.08

Reputation:-  0  +

Good day.
I decided to putApple Mac OS X Leopard 10.5.2 (2008 / Kalyway / x86 / RUS) , naturally first having studied the details of the installation. The computer meets all requirements and is very similar to the configurations indicated here. But there are a couple of questions:

My Asus drive has an IDE interface, you advise patching the build from under Windows, but how and how to do it?

Next on the sections on the hard disk. I have one physical disk divided into 3 logical, 25 under XP, 25 under some other axis(before it was Vista), and remaining for the data. The disk has file system NTFS, interface SATA-II. As I understand it, creating a partition when installing an apple OS is killing all partitions and data, and if the logical disk already exists, can you put the OS there?
Alex_DFR
Message#35
12.12.08, 16:32
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 752
Check in: 17.05.07
Samsung Galaxy S9 Plus Exynos

Reputation:-  204    +

On IDE, a patch is necessary only if the jmicron drive. On sata, I heard there are problems with the drivers. If the installation disk is loaded and the sections on the hard will be visible in the menu, it means you can install. On the logical partition without problems (if you are not going to write to disk from Linux or freebsd - choose the type of Mac OS Journal system, taking into account the case of letters). Only you will have to find the file boot_v9 (it is from pc_efi v9) and add it to the whist loader (well, as a record in the table, it keeps efi). Or put GRUB and the bootloader in it (like mine). Or put Makovsky loader in mbr


--------------------
Sony Xperia Z [CM11], Apple Macbook Pro Retina 2012
GIT d- s a-- c ++ UL P ---! J --- L ++++ E --- W- N O? K? w --- o? V PS + PE Y + PGP ++ t +? 5 X ++ R *! tv b ++ DI ++ D ++ G ++ e * h +
I can do linux, u-boot, drivers, embedded, opengl, dsp, cuda, that's all
angel-4d
Message#36
12.12.08, 19:17
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 11.12.08

Reputation:-  0  +

Alex_DFR @ 12.12.2008, 16:32*
Only you will have to find the file boot_v9 (it is from pc_efi v9) and add it to the whist loader (well, as a record in the table, it keeps efi). Or put GRUB and the bootloader in it (like mine). Or put Makovsky loader in mbr

Here in general did not understand a word. How can it be easier? I do not have whists, only XP.

Post has been editedangel-4d - 12.12.08, 19:18
Alex_DFR
Message#37
12.12.08, 20:40
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 752
Check in: 17.05.07
Samsung Galaxy S9 Plus Exynos

Reputation:-  204  +

So. you swing
http://rapidshare.com/files/172759680/chain0.html
you copy to C: \ chain0 (well, that is, you just put it on the root of the disk)
in C: \ boot.ini at the end you add a record

C: \ chain0 = "osx"


--------------------
Sony Xperia Z [CM11], Apple Macbook Pro Retina 2012
GIT d- s a-- c ++ UL P ---! J --- L ++++ E --- W- N O? K? w --- o? V PS + PE Y + PGP ++ t +? 5 X ++ R *! tv b ++ DI ++ D ++ G ++ e * h +
I can do linux, u-boot, drivers, embedded, opengl, dsp, cuda, that's all
CrazyBigCat
Message#38
16.12.08, 17:07
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 05.05.06

Reputation:-  6  +

Hello to all! Retail Mac OS X 10.5.4 with Voodoo Kernel 9.5 R was installed to its configuration described earlier and successfully upgraded to 10.5.5 and then to 10.5.6. Of the third-party stands a few kekstov for iron support, the video got thong. No patches and Russifiers were used - everything works like that.
CrazyBigCat
Message#39
16.12.08, 17:26
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 05.05.06

Reputation:-  6  +

CDK @ 11.26.2008, 5:29*
The question is a bit off topic, but you probably know - is it possible to connect a Mac with a PC via FireWire? PC-PC works fine. I poke one of the ends on Mac - Wind says that I found a new device, there is no firewood for it.


All modern Macs have a special mode - Target mode (T-mode). At the start, you need to press and hold the T button on the keyboard, and the Mac will boot into T-mode, in which it only works in the firewire disk mode.
In Mac's utilities, there is a program, by running it and connecting the Mac to the PC with a FireWar cable, the PC will show the Mac as a regular FireWarn disk in Windows.

Post has been editedCrazyBigCat - 16.12.08, 17:41
angel-4d
Message#40
20.12.08, 12:39
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 11.12.08

Reputation:-  0  +

Good day. Rocked finallyApple Mac OS X Leopard 10.5.2 (2008 Kalyway x86 RUS)besidesKalyway_10.5.2_DVD_Intel_Amd.iso and Readme file there was a daddy ADD_KEXT_TO_DVD in her folder Natit.kext and 2 files Add_kext_to_dvd_boot ReadMe.rtf , Add_kext_to_dvd_boot.command . Here is what is written in the readme "Add it to the folder where you want it to go and add it to your folder and add it to your drive. Add_kext_to_dvd_boot.command !!! . I understand that in order to add driver support to the assembly, you need to add a folder and a command file using UltraISO to an ISO file or what?

Post has been editedangel-4d - 20.12.08, 12:40
angel-4d
Message#41
20.12.08, 16:29
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 11.12.08

Reputation:-  0  +

Well, I recorded the image on a disk without adding any folders, because If you try to throw something into the ISO image of the Mac and save it, it will weigh 300KB. I recorded at 1x speed on DVD-RW SmartTrack disc. When booting from CD-ROM, an inscription appears, press any button to start downloading from the disk, click, the download of some files begins and after about a second this message appears on the black screen in white letters(see attached file) . After this, only Reset helps. What could it be?

P.S. It is a pity that the forum is dead. People here are smart, they will always help, only they practically don’t come here.


Attached images
Attached Image


Post has been editedangel-4d - 20.12.08, 16:56

2088 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19, 20:13