[X]Assistant

[ALEX @!]

Xiaomi Yeelight Smart LED Ceiling Light / Special Edition / Lamp Kids - Discussion

Official site | Purchase пїЅ| Discussion В»|Yeelight application пїЅ | Xiaomi club пїЅ

Devices discussed in the topic:

• Xiaomi Yeelight Smart LED Ceiling Light
  
• Xiaomi Yeelight Smart LED Ceiling Light Special Edition
  
• Xiaomi Yeelight Smart LED Ceiling Lamp Kids

• In the subject are allForum Rules | Section Rules;
  
• Useful topics to note:Forum FAQ | How to clean the image under the spoiler;
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where you were helped, and write thanks;
  
• In the absence of the curator, the moderator fills the topic header. Use the buttonon the message, which, in your opinion, you need to add to the header to contact the moderator.
  

Device photos

Xiaomi Yeelight Smart LED Ceiling Light

Xiaomi Yeelight LED Ceiling Light Special Edition

Xiaomi Yeelight LED Ceiling Lamp Kids

Device description

Xiaomi Yeelight Smart LED Ceiling Light

Minimalistic and versatile design, effective “smart” development, healthy, high-quality lighting. Reading or ordinary room lighting - Yeelight will be for you not only a lamp, but also a caring companion.

Sunlight is considered to be the ideal lighting. The Yeelight luminaire uses 240 Lumileds / OSRAM LEDs with a high color rendering ratio of 95Ra: it is through them that it can provide you with real natural light, preventing distortion of colors. The drawings of the baby or the makeup of his mother - all colors will now become more real than ever before. Good lighting - the way to the world of true colors!

Ra is the color rendering ratio obtained when testing 8 reference colors; The indicator under the international standard should exceed 80.
R9 is an indicator of red color, according to the international standard should be greater than 0. Realism of red color plays an important role in the display of food and tones of human skin, which is the weak point of most LED lamps from Chinese manufacturers.
Do you still remember how you fell asleep in childhood under the moonlight that seeps through the window? The intellectual Yeelight lamp will be able to return those quiet moon nights to our modern life, full of worries and troubles. A low luminance of 0.1 lumens will turn the lamp into a real moon: its soft light will take care of your eyesight and help you fall asleep faster. Good lighting is the way to a healthy life!

Xiaomi Yeelight Smart LED Ceiling Light

The description is similar to Xiaomi Yeelight Smart LED Ceiling Light. See differences incharacteristics.

Xiaomi Yeelight Smart LED Ceiling Lamp Kids

5 minutes. Quick install

It promises quick installation in just 5 months. Innovative motors with quick coupler allow you to easily and simply press and slide to fix the lamp in the holder.

App and Bluetooth remote control

The yeelight ceiling lamp connects to the Mi Home APP or Yeelight APP via WiFi, it can be monitored using smartphones via Wi-Fi or Bluetooth, don't be afraid of the signal unit even in a blanket. Up to 0.1 lumens of ultra-low brightness, which, just like a full moon, provides a warm and cozy light to take care of children.

Bright and natural lighting

240 high-quality LED lamps, whose color rendering index (Ra) is up to 95, give the most natural light without affecting the visual effect of the low color rendering index. It comes with a bluetooth remote control, which allows you to remotely start and stop lights, without necessarily being in the same room.

Convenient remote control for children

The control has only five buttons with indicative icons for guidance, children can learn to use it easily.

Mi band linkage

Via Mi Home APP or Yeelight APP, the ceiling lamp and your Mi band tape, then the ceiling lamp will be based on your sleep state to determine if the lights are turned off, do not interrupt your foggy dream anymore.

IP60 dustproof design

The lamp is designed for IP60 dust protection, which protects it from dust and can get rid of annoying insects that usually soar around illuminated lamps.

Device characteristics

Xiaomi Yeelight Smart LED Ceiling Light

• Body Color: White
  
• Weight 1360 g
  
• Body Material Plastic
  
• Input current, A 0.12
  
• Rated power, W 28
  
• Wireless Protocols - Wi-Fi 2.4 Ghz, Bluetooth 4.2
  
• Luminous flux, lm 1800 + 10%
  
• Color temperature, K 2700 - 6500
  
• Color Rendering Index (CRI) ≥95
  
• Illuminated field: 10-20mВІ
  
• IP60 degree of protection
  
• The term of operation is 25000 h
  
• Product Size (L x W x H): 32.00 x 32.00 x 7.30 cm / 12.6 x 12.6 x 2.87 inches
  
• Package Size (L x W x H): 39.00 x 38.00 x 10.00 cm / 15.35 x 14.96 x 3.94 inches
  
• Equipment
  
  • 1 x LED ceiling light
    
  • 2 screws, 2 screws, instruction
    
  • 1 x Bluetooth remote control (1 3.3V button battery)

Xiaomi Yeelight LED Ceiling Light Special Edition

• Differences from Xiaomi Yeelight Smart LED Ceiling Light:
  
  Body colors: orange, blue, yellow
  
• Weight 1360 g
  
• Body Material Plastic
  
• Input current, A 0.12
  
• Rated power, W 28
  
• Wireless Protocols - Wi-Fi 2.4 Ghz, Bluetooth 4.2
  
• Luminous flux, lm 1500
  
• Color temperature, K 2700 - 6500
  
• Illuminated field: 10-20mВІ
  
• Color Rendering Index (CRI) ≥95
  
• IP60 degree of protection
  
• The term of operation is 25000 h
  
• Product Size (L x W x H): 32.00 x 32.00 x 7.30 cm / 12.6 x 12.6 x 2.87 inches
  
• Package Size (L x W x H): 39.00 x 38.00 x 10.00 cm / 15.35 x 14.96 x 3.94 inches
  
• Package content
  
  • 1 x LED ceiling light
    
  • 1 x Bluetooth remote control (1 3.3V button battery)

Xiaomi Yeelight LED Ceiling Lamp Kids

• Body colors: orange, blue, yellow
  
• Weight 1360 g
  
• Body Material Plastic
  
• Input current, A 0.12
  
• Rated power, W 28
  
• Wireless Protocols - Wi-Fi 2.4 Ghz, Bluetooth 4.2
  
• Luminous flux, lm 1500
  
• Color temperature, K 2700 - 6500
  
• Illuminated field: 10-20mВІ
  
• Color Rendering Index (CRI) ≥95
  
• IP60 degree of protection
  
• The term of operation is 25000 h
  
• Product Size (L x W x H): 32.00 x 32.00 x 7.30 cm / 12.6 x 12.6 x 2.87 inches
  
• Package Size (L x W x H): 39.00 x 38.00 x 10.00 cm / 15.35 x 14.96 x 3.94 inches
  
• Package content
  
  • 1 x LED ceiling light
    
  • 1 x Bluetooth remote control (1 3.3V button battery)

Platform Compatibility

Android, iOS

Instructions

Restore factory settings

Useful

Instructions in Russian

Script Translation

ејЂ - On
е…і - Off
ејЂ / е…і - Switch On / Off
дє®еє¦ + - Brightness +
дє®еє¦ - - Brightness -
亮度 切换 - Brightness switch
и‰Іжё© + - Color temperature +
и‰Іжё© - - Color temperature -
色温 切换 - Color temperature switch
ејЂеђЇ е¤њзЃЇ жЁЎејЏ - Turn on night light mode
е…ій—­ е¤њзЃЇ жЁЎејЏ - Turn off night light mode
Brightness 或 切换 亮度 - Turn on or switch the brightness
开 或 切换 色温 - Turn on or switch color temperature
и°ѓиЉ‚ дє®еє¦ - Adjust the brightness
и°ѓиЉ‚ и‰Іжё© - Adjust the color temperature
Off 并 延时 关灯 - Turn Off The Lights
并 设置 灯光 - Turn on and set the lights

1. Make the lamps turn on when the motion sensor is triggered on schedule, during the day in normal mode, and at night and in the early morning hours at night
2. Make it so that when you open the entrance door on which the (opening sensor) is installed, the lamps turn on in day mode, regardless of the time of day and a notification is sent to the phone

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedALEX @! - 26.06.18, 23:18

[neez]

aspector,
thank

[andyholding]

The lamp is new with wi-fi, timers do not work in mihome. In the yeelight application, the lamp is located, everything is OK, but after registering, the inscription "offline" and everything is not controlled, changed the server, restarted repeatedly

[aspector]

andyholding,
I would have sinned on a router or provider. Another router (smart with vpn) can test this theory.

[РЇROSLOVE]

On the 12th, the update came to the chandelier and now the device is offline. After the reset of the chandelier, it is seen by the application, and the connection timeout begins to be added. I tried on two phones. In the house, 16 different devices from the Mi kit have been working properly for over a year, and here is the first "swallow" ...

[aspector]

РЇROSLOVE,
1) The last one was this update.
1.4.8_173 .

She got up regularly. Glitches like no.

2) Does the lamp work? Is it controlled from the standard console?

3) I am convinced that the problem may be at the level of the router or provider.
If you want we can search.

Post has been editedaspector - 13.11.17, 10:44

[РЇROSLOVE]

Only with the remote and controlled.

[aspector]

ROSLOVE,
1) The brains are alive.
2) It is necessary to pick the settings of the router.

[ExP2]

In the Yeelight application, when you click on the right button at the bottom of the "Favorites", nothing happens, although a list of pre-installed scripts should be displayed on the video reviews. Did someone have the same? How was it treated? The firmware in the lamp is the last.

[aspector]

ExP2In the new design of the application (well, at least on the android), you need to click on the image of the lamp itself (where it is opposite).

[ExP2]

aspector, sorry, confused. In the Mi Home application, this button does not work.

[aspector]

ExP2,
I confirm. Application with googleplay 5.0.10 is not working.

[ExP2]

aspectorYes, in MiHome_5.0.8_patch_ru_Opel.apk also does not work. So it did not seem.

[ExP2]

The week received a lamp Xiaomi Yeelight Smart LED Ceiling Light. It was interesting to the internal device, so the first thing dismantled.

The disassembly process is quite simple: put the lamp on the table with the diffuser down, see the grooves of the latches along the edge of the case, alternately insert a flathead screwdriver into each of them and push it with the tip towards the center of the lamp, while at the same time slightly bending the rim off the plastic case. It remains only to pull the body up from the rim to remove it.

The panel with LEDs is bolted on 3 screws to the case and connected via a 4-pin connector to the electronics board. The connector supplies +/- power separately for warm and cool white LEDs.

The electronics board is fixed with two latches to the case.

Measured the voltage at the terminals of the connector:
At WW / CW = 27-30.5 volts, depending on the brightness level set.
In the nightlight mode on CW = 23-26 V, depending on the brightness.

Post has been editedExP2 - 16.11.17, 21:31

[aspector]

ExP2,
I can barely suspect the esp in the white box on the right.
Question: is there an option for not complicated reworking on power from direct current like 12vdc or 48vdc?

[codename_47grr]

For information. I ordered a lamp on Gearbest, I came. But the change in color temperature does not work. Ali has such versions, they are cheaper, Zhirbest also declared the full functionality. After a brief dispute, he knocked out from 5 to 30 bucks, i.e. 50% of the cost. Be careful.

Post has been editedcodename_47grr - 17.11.17, 12:52

[aspector]

codename_47grr,
there is a difference in the capspecial version.
It would be necessary to sort out the manufacturer’s codes, otherwise sellers can write what they want.
color case?

Post has been editedaspector - 17.11.17, 14:34

[ExP2]

aspector,
The simplest thing is to connect the LED panel through a dc-dc up-converter for 12vdc or down for 48vdc. At the same time all the lamp functionality will not work. The brightness adjustment will be via a trimmer on the dc converter, and the color temperature will depend on which line of LEDs is energized. This option is not very, it would be much better to exclude the power circuit on the electronics board and apply vdc-power for the rest of it. But it is already more difficult - you need to know the scheme or show the board with all the tracks to competent specialists. I'm not an electronics engineer, I won't help here.
By the way, where it may be necessary to power the lamp from 12 / 48V?

[aspector]

ExP2,
: offtopic:
Powering 12 or 48 vdc may be interesting
a) battery - lamp as emergency lighting
b) in the presence of a mini solar power station (reduces the constant-to-constant-to-constant conversion losses).
c) for use in super wet conditions (hang over the shower).

Post has been editedaspector - 17.11.17, 21:30

[mynik]

Today hung white. Beautiful.
A couple of weeks ago I hung up two color (some that were children’s), there was such a hochma with remotes - one remote worked for both lamps - in different rooms, but the second remote only for one lamp.
Non-lethal, the second remote can be "corrected", but it is a little annoying.
Maybe someone will tell whether it is possible to wean the remote from the second lamp? Without Mihome?
Changed, reset, changed the remotes on the lamp - does not help.
Fearing for the third side of the conflict: rofl:
but she turned out to be self-sufficient, no one bothers her, and she bothers no one.

[aspector]

[email protected], 20:21

Changed, reset, changed the remotes on the lamp - does not help.

: wacko:
I can not even imagine how this is possible.
Maybe the lamps on the servers are connected in a group and the remote is not aisle ...
If the cloud is not needed, re-overwrite them on different servers in the yeelight application.