Assistant
REPLY |
Xiaomi Yeelight Smart LED Ceiling Light / Lamp Kids | [smartHome] Xiaomi Smart Ceiling Light |
Message#1 19.10.17, 15:37 | ||
Experienced [offline] Group: Curators Messages 519 Check in: 11.07.14 Oneplus one Reputation: 70 | Xiaomi Yeelight Smart LED Ceiling Light / Special Edition / Lamp Kids - Discussion Official site | Purchase �| Discussion »|Yeelight application � | Xiaomi club � Devices discussed in the topic:
Device photos Device description Xiaomi Yeelight Smart LED Ceiling Light Minimalistic and versatile design, effective “smart” development, healthy, high-quality lighting. Reading or ordinary room lighting - Yeelight will be for you not only a lamp, but also a caring companion. Sunlight is considered to be the ideal lighting. The Yeelight luminaire uses 240 Lumileds / OSRAM LEDs with a high color rendering ratio of 95Ra: it is through them that it can provide you with real natural light, preventing distortion of colors. The drawings of the baby or the makeup of his mother - all colors will now become more real than ever before. Good lighting - the way to the world of true colors! Ra is the color rendering ratio obtained when testing 8 reference colors; The indicator under the international standard should exceed 80. R9 is an indicator of red color, according to the international standard should be greater than 0. Realism of red color plays an important role in the display of food and tones of human skin, which is the weak point of most LED lamps from Chinese manufacturers. Do you still remember how you fell asleep in childhood under the moonlight that seeps through the window? The intellectual Yeelight lamp will be able to return those quiet moon nights to our modern life, full of worries and troubles. A low luminance of 0.1 lumens will turn the lamp into a real moon: its soft light will take care of your eyesight and help you fall asleep faster. Good lighting is the way to a healthy life! Xiaomi Yeelight Smart LED Ceiling Light The description is similar to Xiaomi Yeelight Smart LED Ceiling Light. See differences incharacteristics. Xiaomi Yeelight Smart LED Ceiling Lamp Kids 5 minutes. Quick install It promises quick installation in just 5 months. Innovative motors with quick coupler allow you to easily and simply press and slide to fix the lamp in the holder. App and Bluetooth remote control The yeelight ceiling lamp connects to the Mi Home APP or Yeelight APP via WiFi, it can be monitored using smartphones via Wi-Fi or Bluetooth, don't be afraid of the signal unit even in a blanket. Up to 0.1 lumens of ultra-low brightness, which, just like a full moon, provides a warm and cozy light to take care of children. Bright and natural lighting 240 high-quality LED lamps, whose color rendering index (Ra) is up to 95, give the most natural light without affecting the visual effect of the low color rendering index. It comes with a bluetooth remote control, which allows you to remotely start and stop lights, without necessarily being in the same room. Convenient remote control for children The control has only five buttons with indicative icons for guidance, children can learn to use it easily. Mi band linkage Via Mi Home APP or Yeelight APP, the ceiling lamp and your Mi band tape, then the ceiling lamp will be based on your sleep state to determine if the lights are turned off, do not interrupt your foggy dream anymore. IP60 dustproof design The lamp is designed for IP60 dust protection, which protects it from dust and can get rid of annoying insects that usually soar around illuminated lamps. Device characteristics Xiaomi Yeelight Smart LED Ceiling Light
Xiaomi Yeelight LED Ceiling Light Special Edition
Xiaomi Yeelight LED Ceiling Lamp Kids
Platform Compatibility Android, iOS Useful Instructions in Russian Script Translation 开 - On 关 - Off 开 / 关 - Switch On / Off 亮度 + - Brightness + 亮度 - - Brightness - 亮度 切换 - Brightness switch 色温 + - Color temperature + 色温 - - Color temperature - 色温 切换 - Color temperature switch 开启 夜灯 模式 - Turn on night light mode 关闭 夜灯 模式 - Turn off night light mode Brightness 或 切换 亮度 - Turn on or switch the brightness 开 或 切换 色温 - Turn on or switch color temperature 调节 亮度 - Adjust the brightness 调节 色温 - Adjust the color temperature Off 并 延时 关灯 - Turn Off The Lights 并 设置 灯光 - Turn on and set the lights 1. Make the lamps turn on when the motion sensor is triggered on schedule, during the day in normal mode, and at night and in the early morning hours at night 2. Make it so that when you open the entrance door on which the (opening sensor) is installed, the lamps turn on in day mode, regardless of the time of day and a notification is sent to the phone There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links. Post has been editedALEX @! - 26.06.18, 23:18 | |
Message#22 08.11.17, 09:43 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 111 Check in: 05.04.07 ZTE Nubia Z17 Lite 6/64 Reputation: 1 | |
Message#23 08.11.17, 11:49 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | |
Message#24 08.11.17, 12:06 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 111 Check in: 05.04.07 ZTE Nubia Z17 Lite 6/64 Reputation: 1 | And how does the control go through the switch in general, if you do not take into account the disconnection of the physical line. The switch is synchronized with the lamp, and can control it even without wifi, or the lamp responds only on events in the michome. (or is this just the way this lamp works, or all devices?) I honestly don't understand the zigbee chip. After syncing the device via zigbee, can I work regardless of whether there is wifi, or should everything be online all the same?) |
Message#25 08.11.17, 12:19 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | |
Message#26 08.11.17, 12:45 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 111 Check in: 05.04.07 ZTE Nubia Z17 Lite 6/64 Reputation: 1 | |
Message#27 08.11.17, 14:03 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | James026,: offtopic: She's in my wifi too. Now all mihome wifi + zigbee gateways, so the question is not relevant. Post has been editedaspector - 03.11.18, 23:19 |
Message#28 09.11.17, 17:18 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 60 Check in: 16.10.15 Reputation: 1 | People help how to connect the remote? I did it several times according to the instructions, but I don’t see the lamp and that's it. P.S. found. hands to tear off who wrote instructions off Post has been editedkazzap - 09.11.17, 17:22 -------------------- xiaomi mi6 128GB mipad 4 (4g) |
Message#29 10.11.17, 04:50 | |
Novice [offline] Group: Active users Messages 31 Check in: 10.11.17 Reputation: 0 | [email protected], 17:18 People help how to connect the remote? I did it several times according to the instructions, but I don’t see the lamp and that's it. P.S. found. hands to tear off who wrote instructions off write share the same whole head broke (and xs as the first time he set up Posted 10/11/2017 04:51 AM: I ran into Result's problem (this topic does not work for five seconds for two seconds for some reason ( |
Message#30 10.11.17, 09:04 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | kobagaz, Pull out the power, bring it close to the lamp, hold down M and OFF. Need 2 people. And I cut the power through the machine in the shield. Post has been editedaspector - 10.11.17, 09:18 |
Message#31 10.11.17, 11:48 | |
Novice [offline] Group: Active users Messages 31 Check in: 10.11.17 Reputation: 0 | kobagaz, Pull out the power, bring it close to the lamp, hold down M and OFF. Need 2 people. And I cut the power through the machine in the shield. [Attachment = "11468342: Screenshot_2017-11-10-08-03-12-812_com.yeelight.cherry.png"] [Attachment = "11468343: Screenshot_2017-11-10-08-03-12-812_com.yeelight.cherry.png"] I tried it all ( Not only can I not configure the remote so I also cannot reset the factory settings, although it will simply work from the network |
Message#32 10.11.17, 12:26 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | kobagaz Video report to the studio. First, that the battery is inserted into the remote control correctly (that the gasket from the remote under the battery is removed). Then, that you turn off not with a logic switch, but with a plug from the network. Then we will find out if the remote control is working and how to properly throw off the lamp. Tied and dropped 2 lamps. Confused, but possible. Mow somewhere. Post has been editedaspector - 10.11.17, 12:27 |
Message#33 10.11.17, 12:35 | |
Novice [offline] Group: Active users Messages 31 Check in: 10.11.17 Reputation: 0 | kobagaz Video report to the studio. First, that the battery is inserted into the remote control correctly (that the gasket from the remote under the battery is removed). Then, that you turn off not with a logic switch, but with a plug from the network. Then we will find out if the remote control is working and how to properly throw off the lamp. Tied and dropped 2 lamps. Confused, but possible. Mow somewhere. read again what the problem is, and I could describe it if I hadn’t removed the plug from the battery compartment, the solver |
Message#34 10.11.17, 13:14 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | kobagaz 1) you didn’t describe your problem in a normal, long way and in steps. Briefly, I understood this: you can not bind the regular remote to the lamp. 2) if everyone is attached and you don’t, then you shouldn’t go around telling that you are smart and the rest are undergraduates. So you do not solve the problem, and ruin your reputation. 3) two options a) marriage - 0.3% b) you mow 99.7%. |
Message#35 10.11.17, 14:43 | |
Novice [offline] Group: Active users Messages 31 Check in: 10.11.17 Reputation: 0 | kobagaz 1) you didn’t describe your problem in a normal, long way and in steps. Briefly, I understood this: you can not bind the regular remote to the lamp. 2) if everyone is attached and you don’t, then you shouldn’t go around telling that you are smart and the rest are undergraduates. So you do not solve the problem, and ruin your reputation. 3) two options a) marriage - 0.3% b) you mow 99.7%. what is there to describe? that there is no connection to the remote base? What have all the options been tried? you had enough to ask how that blonde whose car doesn’t like gasoline))) I have 24 xiaomi devices from the series. Probably I can customize? About the reputation of the Internet is just do the fire most likely factory marriage and don’t write to me and don’t answer, I’d rather read people who don’t work out and understand what they are writing about |
Message#36 11.11.17, 13:46 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | |
Message#37 11.11.17, 17:10 | |
Visitor [offline] Group: Active users Messages 15 Check in: 23.10.08 Samsung Galaxy Note 2 GT-N7100 Reputation: 0 | Say I'm trying to understand all this and I’m not really catching up yet. For the lamp you need another server? or it works through the application on the phone, and can a two-button switch be tied to two lamps or already current scenarios on the server. |
Message#38 11.11.17, 17:44 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | For the lamp you need another server? or it works through the application on the phone, and can a two-button switch be tied to two lamps or already current scenarios on the server. 1) your server is optional. 2) There are two applications for the phone mihome and yeelight. 3) you can buy a mihome gateway and aqara two-button wireless switch, it will be on / off without internet (but through home wifi). upd: 4) with crutches (their equipment) other scenarios are possible. 5) Included is a bluetooth remote and in my opinion you can do a total on / off for a group of lamps. Post has been editedaspector - 11.11.17, 17:52 |
Message#39 11.11.17, 19:07 | |
Visitor [offline] Group: Active users Messages 15 Check in: 23.10.08 Samsung Galaxy Note 2 GT-N7100 Reputation: 0 | those. The akara switch works only with a mihom, or on the phone too. and if the phone is not in the apartment? |
Message#40 11.11.17, 19:46 | |
Novice [offline] Group: Active users Messages 31 Check in: 28.09.14 Highscreen Boost 2 SE Reputation: 3 | The work on the schedule (on / off) does not work, the same with switching on and off the night light. In the English / Mainland China settings. I set the local time (MSK) and +5 ... what is the reason? Opel application |
Message#41 11.11.17, 21:19 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3929 Check in: 19.07.13 Xiaomi Redmi Note 2 Prime Reputation: 465 | neez, The aqara switch works with the device - the zigbee / wifi gateway from the mihome ecosystem. The smartphone is needed only for setup. You press a button - it sends a signal to the zigbee to the gateway - the gateway to the wifi sends a signal to the home router - the yeelight ceiling router. Posted 11/11/2017 21:21: andyholding, I do not know anything about the nightlight. Is he already new with wifi? Application from Yeelight enjoyed? If you have nothing else, then you can change the server from China. |
mobile version | Now: 04/29/19, 23:56 |