Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
Specifications
Produced in 2 versions: 1. with 512Mb RAM, 4Gb ROM 2. with 1024 RAM, 4Gb ROM other parameters are the same: CPU: ARM Cotex A7 dual Core CPU with frequency of 1.5GHz MAX GPU: Multi-core Mali -400MP2 Wi-Fi 2.4Ghz, LAN 100Mbit, 2 USB 2.0, VGA, HDMI 1.4, 2 AV-IN, MicroSD, Eartphone. Power supply: 12V 4A OS: Android 4.4 Supports (for now)only ANALOG TV + DVB-C. T2 is not working yet. Miracast / DLNA. Matrix resolutions: 1280 * 1024, 1366 * 768, 1440 * 900, 1600 * 900, 1680 * 1050, 1920 * 1080
action on tv 1. flooded the firmware 2. put the language 3. Settings - About phone - Build number (tap until we become a Developer) 4. connected via Ethernet (the network must be working). Go Settings - Ethernet, look at your IP (for example, 192.168.1.146) actions on the PC 5. we clamp "Shift" and we click PKM on the folder with adb we select the item "Open a window of teams" 6. enter adb connect 192.168.1.146 here enter your ip in the command line window will be the answer "connected to 192.168.1.146 Low555" on TV pops up a request "Debugging via USB" - tick "Always allow debugging from this computer" - OK 7. install Kingo Android Root on the PC (I already had it) 8. launch Kingo, it will connect and issue two buttons, press ROOT and wait for the installation, in parallel there will be progress on TV. Root Succeeded! Pluses compared to 360Root: In Russian + familiar su su. Related software:ROOT, Adb Instruction providedFoxtrot_KZ,
------------------------------ And also, a little later we will add a partitioning disk ROM. Option to change the screen saver when turned on, Useful software (launchers, programs for IPTV, etc.)
------------------------------ ATTENTION! If after the firmware you do not see the image on the display, see the bands, etc. use the "BLIND" method of flashing: When the power is turned off, insert the USB flash drive, hold down the Power button to give power and hold until the LED starts to blink. The firmware has begun.MUST WAIT until the diode turns red (5-7 minutes), then remove the flash drive. Enter RECOVERY or Safe Mode. Disconnect the power from the scaler, then .. Press the "VOL +" button to turn on the power and turn on from the remote control - loading modeRecovery Press the "VOL-" button to turn on the power and turn on from the remote control - "Safe mode", downloads pure android without user applications. Entrance to the engineering menu:SOURCE 2580(all changes in the engineering menu at your own risk)
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.
Post has been editedCrazy_cooler - 28.05.19, 23:27
Reason for editing: GZGT_MSD338-V5.0_TestIII_1G_4G_FullHD_Alegord_20190508_eng
then ALL: Can anyone use which program "remote" via WiFi? - advise for the native remote is something sad if there is such a decent one can also have a hat
I tried the firmware from the caps. Firmware for China. Launcher is different, there is no playmarket. Only Chinese and English languages. Returned to my firmware.
Do you generally experiment with tvconfig? If I were you, I would try to transfer it with bbk, along with the rest of the tv folders. The fact is that in their structure they are universal, and your architectures are the same. Either, nothing will happen, or if that can be felt, you can finish it.
acura2, Do you have folders in a disassembled form or as an image? The fact is that in addition to the folders themselves, the image also contains a hidden info, which one ... I don’t know, I understand.