[X]Assistant

[Win xp]

drivers and utilities

driverhttps: //drive.google.c...BIZk0/view? usp = sharingflashlighthttps: //drive.google.c...5vc1k/view? usp = sharing

firmware

http://m.myflashgsm.net/rm-1190-russian-rar/

special thanks [spoiler]Ximik_Boda GOOSE8998 .

instructions

Password reset
Nokia 150 rm1190 firmware (Fasting Foreen # 68204691)

Post has been editedWin xp - 08.02.18, 21:37

[Win xp]

here is the link for x86

https: //drive.google.c....VaUFk/view? usp = sharing

[Ximik_Boda]

Win xp,
And I can help you to backup backup?

[Win xp]

Ximik_Bodaseems not

[Ximik_Boda]

Win xp,
read back

[bakiche]

Hello, there is no scatter / config file in the firmware. How to flashtoto flash without this file.

[JAMB0007]

Bakiche @ 10/12/17, 09:15

Hello, there is no scatter / config file in the firmware. How to flashtoto flash without this file.

Hello everyone, the question is relevant, how to flash this miracle?

[uran-7]

someone made the firmware or reset user code?

[lumia_525]

scatter / config no ...: angry:: angry:
And what to do?

link by the way x86 is not working

Post has been editedlumia_525 - 11.11.17, 17:36

[lumia_525]

Nokia 150 rm-1190
For those who just need to reset the secret code: P, I give info:
It is based on the Miracle Box prog. Next, the driver and the appropriate OS.

I personally installed it on XP, but I didn’t get a driver like 10 (it would probably be worth turning off the digital signature, but I didn’t want to because of the second Windows)
So: put the x64 or x86 driver (for the phone to be detected), launch the Miracle box and perform the manipulations: click on MTK - check mark on Format - select 12th - safe mode - click start and connect the phone. Phone minute reset and OK! You can restart the phone and everything is ready.

Necessary:

https://www.youtube.com/watch?v=zDhWSnMYzxs- instruction
http://tinyium.com/2sb5- Miracle Box
http: //server1.infinit…/pub.php? dir = software /- driver

Post has been editedlumia_525 - 12.11.17, 08:59

[Win xp]

lumia_525Is boxing necessary for this or not?

[sako_333]

Win xp @ 02.12.17, 16:24

Is boxing necessary for this or not?

Not needed, just reset the password through this program)
Thank you lumia_525

[Win xp]

lumia_525it looks like the firmware for miracle box

[ekspert_80]

It was possible to remove the password on the same machine using a broken program from the miracle box. Here is the link:https: //www.mediafire……11crue2x382d/Setup.rararchive password: hup-tin
After installing the program, go to the path: "C: \ Program Files \ Miracle by Ashraful \ BOX_Data" delete the file Handle.
Restart the computer, run the program as an administrator, everything was done on windows 7 & 32bit.

[Foreen]

Password reset. working method.

1. Download and install the driver from the header
or here:Drivers_MTK_USB_Serial_Port_x64.7z(309.56 KB)


2.We swing flashtool from a cap
or here:FlashTool_v5.1420.00 Azeem.rar(4 MB)


3.Downloading FlashTool firmware
here:RM-1190.rar(3.39 MB)


3aThe path to Flashtool and firmware should not contain Russian letters!

4.Open the archive with the firmware (do not unpack ), open the file password , select and copy the password, unpack the firmware.
(you can copy the password from here -Maqsood Mobile Software ).

5. Run as administrator Flashtool

6. Push button scatter \ config file , we specify.

7. Push button Format . Put a tick on the top item Reset to factory default. Click OK.

8. We take out the battery from the phone, keep it ready

9. We connect the phone without acb to the computer, after a second we insert the acb.

10. We are waiting (it took me 10 seconds, maybe longer) green the circle.

11. You can disconnect the phone from the computer and everything. Done, no password.

Everything you do - you do at your own peril and risk. Be careful.

[jut7676]

RM 1190 Does not charge, does not see the computer when flashing.
He does not see charging; he solved the problem with a jumper instead of a blown fuse and removing the burned-out glass next to it. Charges normally, current ~ 0.700 mAh, the computer began to be detected normally

A photo

Post has been editedjut7676 - 24.12.17, 15:43

[remontnik2891]

Made according to the instructions from the post number 15. lock code left ...

[ekspert_80]

Remontnik2891 @ 12.26.17, 02:17

Made according to the instructions from the post number 15. lock code left ...

Make through this program Miracle by Ashrafu, the code will be removed. Verified personally !!!! (post # 14)
And watch this video here:https://www.youtube.com/watch?v=A-TFPNVU9Jk
Everything will turn out !!!

Post has been editedekspert_80 - 21.01.18, 12:44

[camel87]

ekspert_80 @ 12.12.17, 08:59

It was possible to remove the password on the same machine using a broken program from the miracle box. Here is the link:https: //www.mediafire……11crue2x382d/Setup.rararchive password: hup-tin
After installing the program, go to the path: "C: \ Program Files \ Miracle by Ashraful \ BOX_Data" delete the file Handle.
Restart the computer, run the program as an administrator, everything was done on windows 7 & 32bit.

thank you ekspert_80

[landers7]

Nokia 150 rm1190 Hard Resed, reset the password in this way:

Dial * # 7370 #
Security Code 12345
Rejoice