Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Asus ZenFone Max ZC550KL (MSM8939) - Firmware |
Message#2 29.10.16, 07:59 | |
Fluffy and merciless! [online] Group: Friendssavagemessiahzine.com Messages 1187 Check in: 14.01.10 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 156 | shapiton, Post above because he wrote shortly. Well, if detailed, Installing the firmware clean: If stock recovery is installed: 1 step) full reset via "menu" ->"settings" ->"reset and restore"; Step 2) go into the recovery and do wipe: a) "Wipe Cache" b) "Wipe Data / Factory Reset" If custom recovery is installed: 1 step) full reset via "menu" ->"settings" ->"reset and restore"; Step 2) go into the recovery and do wipe: a) "Wipe Cache" b) "Wipe Dalvik \ art cache" c) "Wipe User media" d) "Factory Reset" d) "Clean to install a new rom Post has been editedAlexanderL - 21.07.17, 21:38 Reason for editing: In the header -------------------- Any power corrupts, and absolute power corrupts absolutely !!! |
Message#3 14.11.16, 08:20 | |
Trying to help [offline] Group: Friendssavagemessiahzine.com Messages 1066 Check in: 09.08.12 Asus ZenFone Max ZC550KL (MSM8939) Reputation: 94 | rasik07go overherechooseFirmwareand look in the listVersion WW 8939_V13.8.26.36. Attached installation instructions, the principle is similar.WW official firmware from ASUS.pdf(8.43 MB) -------------------- Sony Ericsson K750i ->Nokia 6303 classic ->Samsung Galaxy Ace II GT-I8160 ->Samsung Galaxy Ace 3 GT-S7270 ->Asus Zenfone Max ZC550KL MSM8939 / 3Gb / 32Gb (13.8.26.98) |
Message#4 02.12.16, 08:17 | |
Trying to help [offline] Group: Friendssavagemessiahzine.com Messages 1066 Check in: 09.08.12 Asus ZenFone Max ZC550KL (MSM8939) Reputation: 94 | Firmware Khms, look at 36 for 8939 on the site. Clicking on “Global” will start downloading. It is easier to download on the computer, but if you can on the phone, or you prefer on the phone, then download them. After downloading the firmware file (downloaded archive) you need to copy to the memory card, if you downloaded the phone, then yes, it is advisable to specify the memory card immediately. You do not need to create any folders, throw them into the root - that is, just onto the card. Rename is better to 57, then turn off the phone and hold down the "Power" + "Volume -" keys, as the phone vibrates, release "Power", "Volume -" to continue to hold. With the volume keys "+" and "-" you can switch items. Select "Update from SD", press the power key (this is a choice). As the phone puts a new firmware, also go into recovery, there already choose wipe - both items (selection key - power). But this will delete all data. Then choose Restart, the phone will reboot. Data backup To save the data we use the program.Helium, but, unfortunately, it will not back up all programs. Also, it will need to remove the tick "Only application data", thereby it will completely save the application with their settings.Herewritten about the stored data. For Helium to work, you will also need to install their program on the computer (there will be a "ClockworkMod" folder in the Start-up, the Helium program in it, if you have Windows 7),hereWrote how to install smartphone drivers on your computer. To copy SMS, go to SMS / MMS (I use it), 3 points ->Settings ->General settings ->Copy SMS ->Save backup ... The save folder will be in the phone’s memory; To backup the "memorized words" go Settings ->Language and input ->ZenUI Keyboard ->Personal dictionary, there and reserve. The file dictionary.dic is also copied to the memory card, we restore it identically. Contacts can be saved as: Contacts ->3 points next to contact filter ->Contact Management ->Import Export ->Export to the drive, copy the file 00001.vcf to the USB flash drive, restore it identically as before. Post has been edited*** Oriens *** - 14.05.17, 15:43 Reason for editing: Added information -------------------- Sony Ericsson K750i ->Nokia 6303 classic ->Samsung Galaxy Ace II GT-I8160 ->Samsung Galaxy Ace 3 GT-S7270 ->Asus Zenfone Max ZC550KL MSM8939 / 3Gb / 32Gb (13.8.26.98) |
Message#5 13.05.17, 10:34 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 6831 Check in: 21.02.13 Lenovo P2 4/64 Reputation: 1448 | Instructions for flashing with AFT:Asus ZenFone Max ZC550KL (MSM8916) - Firmware (Post MaxMixPro # 48111725) Option 2:Asus ZenFone 2 - Official firmware (Post alex @ rya # 48003961) We do not wait for the robot, the appearance of the inscription "CSC Mode. Long press POWER to restart system" is enough Post has been editedAlexanderL - 13.05.17, 18:48 Reason for editing: In the header -------------------- |
Message#6 21.07.17, 18:36 | |
Trying to help [offline] Group: Friendssavagemessiahzine.com Messages 1066 Check in: 09.08.12 Asus ZenFone Max ZC550KL (MSM8939) Reputation: 94 | Instructions for firmware ASUS ZenFone Max ZC550KL (MSM8939) Firmware. You can flash the phone in several ways - through recovery or through a message in the "curtain", in case of any problems, you can try flashing the service firmware using the ASUS FlashTool utility (hereinafter AFT). Let's start the analysis in order. In all cases, you should download the firmware (links to service will be below). Here are all versions: Firmware
Stable is considered to be the 36th version, however, the 98th also does not have major drawbacks. In ninety-eighth, unlike thirty-sixth, the AUX operation was corrected (a connector for connecting an external audio media device and so on. For example, you can connect your smartphone via cable to a tape recorder or other audio device to play music from a smartphone), the animation is changed when using the utility from “Curtain” “Power and acceleration”, the “Energy Saving” application has changed to “PowerMaster” (in no case do not use the “2x service life” option in it, so your phone will not fully charge and be discharged - that is, it will increase Number of discharge / charge cycles), Avast antivirus has been added to the mobile manager. But the 98th version of the firmware in relation to the 36th can keep less charge at approximately the same usage, and instead of 11-13 (who may have +/– from the indicated) hours of the screen will go 10-12 (also +/–) . Someone talked about increasing the volume of sound when recording video (a common problem). Having chosen the firmware you need, you should copy it to a USB flash drive (you do not need to pull anything out of the archive, the archive is thrown to the root of the flash drive, you do not need to create separate folders). Now about the ways of flashing. Recovery. Copying the archive with the firmware to the flash card, turn off the smartphone, then immediately hold down the two keys “ nutrition "And" volume - "As soon as you feel the vibration, release the key power supply , volume keep going. So you got into recovery . The screen does not work here, it is controlled by the keys: volume + / - it up / down respectively key power supply it is a “choice”. Scroll to the point " apply update from microSD And click on nutrition . After looking for the name of the file, and also select the power button, wait until the phone is completely flashed. Important! For firmware, the battery level should be at least 50%. After the firmware, it is advisable to do a “wipe” (reset) - you can do it through Settings ->Restore and reset ->Reset or booting into recovery and by choosing items “ wipe data "And" wipe cache �. Attention! When resetting, all applications except standard ones, contacts, sms messages and data (photos, videos, music, etc., which must be copied to external storage in advance) from the internal memory of the phone will be deleted. Below will be described how to create a backup. Standard message in the curtain about the update. In this case, the file with the firmware is also copied to the root of the card. If you want to flash the same firmware version or roll back (downgrade) the version, then the firmware file needs to change the last digit so that it is more than the firmware version installed on the smartphone. You can find out your firmware version by the way Settings ->Reference ->Software Information WW_13.8.26. xx where xx firmware version. By changing these numbers from the firmware file ( change it from the computer ) and disconnecting the smartphone from the computer, you will have in the "curtain" a proposal to update the firmware, click and flash. As is the case with recovery It is recommended (but not necessary) to do a reset. Instructions on how to flash service firmware:
Drivers / Utilities / Service Firmware Drivers: Firmware Utilities (AFT):
Service firmware:
Backup copy. To create a backup copy of applications, contacts and sms-messagesASUS Backup v1.1.0.55 160216and installed (in the Play Store, disable the update of this application). Accept the license agreement, you can put a tick "All data", Or select the applications you need. Do not forget to mention "Call Logs�, �Contacts"And"SMS / MMS"(Or those applications that you use for calls and messages). At the bottom choose "Data and applications", Thereby creating a backup copy of not only the data, but also the applications themselves, which do not have to re-download and install. Then you will be prompted to name your backup, you can not change anything and click "OK", then you will be prompted to set a password, and after that you will be warned that you need to wait until the end and not pull out the memory card.Attention! Copying large amounts of data can take a long time, make sure that the battery charge is at least 50%. PDF file with instructions Post has been edited*** Oriens *** - 22.07.17, 09:39 Reason for editing: In the header -------------------- Sony Ericsson K750i ->Nokia 6303 classic ->Samsung Galaxy Ace II GT-I8160 ->Samsung Galaxy Ace 3 GT-S7270 ->Asus Zenfone Max ZC550KL MSM8939 / 3Gb / 32Gb (13.8.26.98) |
Message#7 21.07.17, 20:47 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 6831 Check in: 21.02.13 Lenovo P2 4/64 Reputation: 1448 | How to flash service firmware without Asus Flash Tool For the way we say thank uv.madlzz 1. Unpack the firmware. 2. Press Shift and without releasing click on a free space in the firmware folder (without selecting any file) with the RIGHT mouse button. 3. In the menu that opens, choose "open command line here" (or whatever you have on the "seven", I do not remember already) 4. Drag the file "flashall_AFT.cmd" to the command window. After the file name, you should put a space and "0" if you do not need a full wipe, or "1" if you need a full wipe. 5. Click "enter" - the script will wait for the phone. 6. We drive the bodies into fastboot (volume up + power) and connect to the computer. If everything is normal, then the firmware process will go. The first bun: I want to draw attention to the fact that with AFT firmware, it creates a temporary file three times the size of the firmware in the / Temp folder on the system drive (usually drive C :). And it does not depend on which disk the AFT itself is installed. This means that if there is not enough space on the system disk, then it will not work to flash the phone through AFT. When flashing from the command line, a temporary file is created directly in the firmware folder, which can be located on any disk of your computer. The second bun: It is noticed that on some machines AFT often cannot complete the firmware process, it hangs, or throws out errors. Perhaps this is the result of a conflict with hardware or drivers. Unfortunately, I myself have such a piece of iron. In such cases, rescues the firmware from the command line. Not a single misfire has yet occurred, floods the firmware brazenly and cheerfully. Third bun: Unlike AFT, when flashing from the command line, the process is fully visualized. You can see what is happening with the phone at the moment, and the bulging eyes of a friend / girlfriend at the sight of scary running lines on the screen and the unbounded belief that it was you who derailed the elections in America will keep you amused for a long time. In addition, it is very nice to be aware of yourself as the coolest hacker :) Post has been editedaleksgrayvoron - 21.07.17, 22:26 Reason for editing: In the header -------------------- |
Message#8 01.08.17, 12:50 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 63 Check in: 24.11.05 Reputation: 4 | ZC550KL_8939_SIGNED_Android_M_UnlockTool_2016_0706.apk(786.2 KB) People, Hurray! The site posted an unlock for our model !!!https://www.asus.com/r…0KL/HelpDesk_Download/ Post has been editedAlexanderL - 01.08.17, 13:13 Reason for editing: In the header |
Message#9 01.08.17, 21:00 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3473 Check in: 16.11.10 Reputation: 441 | TWRP 3.0.2 recovery.img(13.3 MB) Most likely our mana will go Asus ZenFone Max ZC550KL (MSM8916) - Firmware (Post lemlis1 # 48733048) Post has been editedJeka061288 - 10.01.18, 14:00 Reason for editing: In the header -------------------- |
Message#10 02.08.17, 13:41 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 6831 Check in: 21.02.13 Lenovo P2 4/64 Reputation: 1448 | Install TWRP First of all, you need to unlock the bootloader with this application:ZC550KL_8939_SIGNED_Android_M_UnlockTool_2016_0706.apk(786.2 KB) Install it as a normal application, run, agree with everything that offers. Deletion of your data will not happen. Also, you need to enable USB debugging in the menu For developers. If you do not have this menu, go to settings.>reference>Software Information>build number. Tap on it about 7 times, exit to Settings. 1. Install drivers on PC:adb-setup-1.4.3.exe(9.17 MB) 2. Install Minimal ADB and Fastboot on the computer (when installing, we put a checkmark on "create an icon on the desktop"minimal_adb_fastboot_v1.3.1_setup.exe(749.53 KB) 3. Download the TWRP recovery file and put it on your PC desktop://savagemessiahzine.com/forum/d…/10786296/recovery.img 4. Open Minimal ADB and Fastboot by clicking on the icon on the desktop. 5. Further: - turn off the device, - Press and hold the "Volume Up" button and the "Power" button at the same time, - "CSC Mode. Long press POWER to restart system" - this is it and is the mode Fastboot (Bootloader), -connect to the computer. 6. In the terminal window we write the commandfastboot devicesand hit enter. 7. In the terminal window we write the commandfastboot flash recovery, space, dragging the file recovery.img with the mouse, which you will install, on the terminal window (there should not be Russian letters on the path to the file) or manually prescribe the path to the file and the name and press Enter. 8. The inscription "FAILED (remote: cant flash unsigned image)" does not pay attention. 9. We write a teamexit, press Enter. Disconnect the phone from the computer,turn off and immediately turn on the recovery mode(press minus Volume and Power, after vibration we drop Power, while continuing to hold down the Volume key). If you do not immediately go into the recovery, but turn on the phone, the stock recovery will recover. 10. If the recovery offers to format the data, we do it. How not to lose user applications located in the data section, look here:We make a backup of the configured system in TWRP 11. When requesting a password: go to the Cleaning section and select Format Data: In the row of the tab that appears we writeyes Pay attention to the content indicated in red on top. Accordingly, all valuables are discarded in advance on the PC. All data will be deleted, including encrypting the partition that caused the password request. 12. MANDATORY!Immediately install SuperSu, because without it, a bootlap is possible:PRO-SuperSU-v2.67.zip Post has been editedaleksgrayvoron - 06.09.18, 17:11 Reason for editing: In the header -------------------- |
Message#11 02.08.17, 14:14 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 6831 Check in: 21.02.13 Lenovo P2 4/64 Reputation: 1448 | SuperSu installation 1. Install TWRPby thisin a way. 2. we throw in memory sdPRO-SuperSU-v2.67.zip 3. We go into TWRP recovery (Turn off the body, press simultaneously -Volume and Power, after vibration we drop Power, while continuing to hold down -Volume), Select Install, select the desired .zip file, flash it and reboot the phone. Post has been editedgrafom - 02.08.17, 14:28 Reason for editing: In the header -------------------- |
Message#12 02.08.17, 19:52 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3473 Check in: 16.11.10 Reputation: 441 | marat0, So that 100% of the stock recovery does not appear, after starting TvRP (it has a file manager), delete the file at the path system \ bin \ install-recovery.sh without this file stock. Recovery will not recover after reboot Post has been editedAlexanderL - 02.08.17, 20:10 Reason for editing: In the header -------------------- |
Message#13 02.08.17, 22:49 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1262 Check in: 12.04.13 Xiaomi Redmi Note 5 3/32 Reputation: 41 | Twrp root 1. Unlock the bootloader with the help of. utilitiesZC550KL_8939_SIGNED_Android_M_UnlockTool_2016_0706.apk(786.2 KB) 2. Go to developer mode to enable usb debugging. 3. InstallMAF32.exe(29.18 KB) 4.Connect the device to the Pk when prompted on the screen to press yes 5. Upload flash driveSuperSU-v2.67.zip(7.56 MB) 6. Start Minimal ADB and Fastboot 7.In the window, run the command adb reboot bootloader, press Enter 8. The body will reboot into adb mode, we enter the following commands fastboot devices we press Enter fastboot flash recovery, space, drag the file with the mouseZ010D_3.1.1.t1.img(13.3 MB) in the window we press Enter 9. Press the minus button and turn on. 4 seconds let go of the turn. We fall into twrp. 10. In the TWRP menu we perform format data ALL THE DATA WILL BE CLEARED 11.Select the menu Reebot recovery reboot system wait a few minutes hold down the turn button until vibro-sig 12.After the launch of the device, enter the data of Google Play and load into the recovery mode 13.InstalSuperSU-v2.67.zip(7.56 MB) Post has been editedgrafom - 03.08.17, 08:55 Reason for editing: In the header |
Message#14 05.08.17, 11:44 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 6831 Check in: 21.02.13 Lenovo P2 4/64 Reputation: 1448 | We make a backup of the configured system in TWRP If you have full access to TWRP (you formatted data immediately after installing TWRP), read from step 5. If there is no full access and the recovery offered to format the data-read from point 1. 1. We do not format and load into the system. 2. Asus Backup application version v1.1.0.55 (pick up here) make backup applications and their data. 3. Go to TWRP, do the data formatting. 4. We reboot into the system and restore the saved applications and data to the Asus Backup application. 5. We customize the system for yourself: accounts, passwords, contacts, etc. 6. Go to TWRP and click Backup. 7. We mark all the points, even with a data volume of 0 mb. At the bottom click the button Select Drive. 8. Choose where the archive of the system will be stored. 9. At the top, click Options and put a check on Use compression. Archive in this case will be less in volume exactly 2 times. 10. Do svayp from left to right. 11. We are waiting for the end of archiving in 5-10 minutes. All tinctures, browser tabs, contacts, sms, call log and the rest of the buns will be saved and will be successfully restored the next time, if you play with your playful;) hands in the system and it will be colored and not loaded (bootlup). Backup recovery: Well, the system "arrived"? Or do you want to return your favorite firmware? Then: 1. We go to TWRP. 2. Select Cleaning. At the bottom click custom cleaning. 3. Check off the items. Daws on the device memory can not be set, especially if there are the necessary files. Do svayp. 4. Go to the main TWRP window and click Restore. Select the desired archive. If you did not immediately fall into the section with the archive, you need to select the drive on which it is located. Usually this is a memory card. 5. Mark all items. Do svayp. We are waiting for about 5 minutes. Reboot. Welcome to the past !!! Post has been editedaleksgrayvoron - 14.07.18, 21:54 Reason for editing: in the header -------------------- |
Message#15 05.08.17, 21:03 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3473 Check in: 16.11.10 Reputation: 441 | just_gleb, roseev, If you do not see the backup on a flash drive, do this: - select any one item, make it a backup - then connect the phone to the computer, find the folder twrp on the flash drive - at the end of the path there will be two folders: one with a normal backup that does not see TvRP and one folder with a backup of one item (understand what is what!) - all the contents of the normal backup from the folder move to the folder where the files of one item are located - after this tvrp again will see a normal backup Karoch, the point is that on one firmware the phone identifier is one, and on the other there can be another identifier, and TvRP refers to the folder whose identifier coincides with the firmware I hope not much confused explained Posted on 08/05/2017 at 21:05: Sergental, There is a setting in TvRP, the default disk for backup Post has been editedAlexanderL - 07.08.17, 22:44 Reason for editing: In the header -------------------- |
Message#16 10.08.17, 18:58 | |
(0_o) [online] Group: Friendssavagemessiahzine.com Messages 903 Check in: 08.04.15 Lenovo P2 3/32 Reputation: 286 | Instructions for assembling the official firmware for installation via TWRP Remember! Everything that you do with your phone, you do at your own peril and risk. For the consequences, except for you, no one is responsible! Important! I laid out the instruction so that you yourself could independently assemble the firmware for TWRP. Read the instructions carefully before the procedure! : rtfm: For bricks, etc. I do not take responsibility!: russian: 1 option 1. Download firmware (service will not work) 2. Unpack the archive with the firmware. 3. Download utility.link 4. Unzip the utility files in the folder with the firmware. 5. Run the batch file -Choose 1 item -We press twice -We are waiting for the end of the process -Get unpacked firmware in the "system" folder 6. Downloading ready-made installation script.Script-test.zip(34.67 MB) 7. Unpack script-test. 8. Copy the folder we received earlier."system". 9. Copyboot.imgOur firmware in the script-test folder. 10. In the folderfirmware-updatesThere are 2 files. replace them with your own firmware from the same folder 11. If you do not need root and busbox, delete folderssupersuandbusybox 12. Select all the files in the folder. And collect in the zip archive. 13. Everything can be flashed. Option 2 1. Download firmware(service will not work) 2. Unpack the archive with the firmware. 3. Delete the folder from the firmware"META-INF"and all the files in the folder"firmware-updates"except files"NON_HLOS.bin"and"asusfw.img" 4. Downloading the ready-made installation script (in fact, did not check it, but it should work).script-test-2.zip(333.2 KB) 5. Unpack the script. 6. Copy folder"META-INF"in the folder with the firmware. 7. Select all files in the folder. 8. Build a zip archive. 9. All Post has been editedgrafom - 10.08.17, 19:16 Reason for editing: In the header -------------------- Ingratitude kills enthusiasm ... ClubLenovo P2 |
Message#17 27.08.17, 10:19 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 13.03.16 Asus ZenFone Max ZC550KL (MSM8939) Reputation: 7 | Aim Android N ASUS ZENFONE MAX MSM 8939 Maybe someone will need, so throwing in more detail. Instruction: 1. Downloading rumhttps: //drive.google.c...w3NIfkBZlMxM3dONW94dm8 2. Download fixhttps: //drive.google.c....alk/view? usp = drive_web 3. Download Gapps if necessaryhttps: //drive.google.c....kBNmFpQ2dYWE4xZXM/view 4. Downloading if you need roothttps: //drive.google.c...aDQ/view? usp = drive_web Attention points 1 and 2 must be installed. 5. Drop the downloaded files into the root of the Sd card. 6. Reboot to twrp. 7. We make a wipe completely all sections except sd. 8. Install zip with rum. 9. Roll fix. 10. Install root and gapps (optional) 11. We are happy Android 7.1.2 Bugs: not seen. Ps: do everything at your own peril and risk. Do not forget to backup Post has been editedRezin228 - 27.08.17, 15:22 Reason for editing: Dp |
Message#18 27.08.17, 10:42 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 725 Check in: 17.08.12 Reputation: 26 | |
Message#19 27.08.17, 11:06 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 773 Check in: 13.08.12 Xiaomi Mi Max 2 4/64 Reputation: 13 | Put Mui 8 Global 7.6.24 Magik was installed, and viper, firmware similar to that from Kybyak, sims are also included. |
Message#20 27.08.17, 11:14 | |
(0_o) [online] Group: Friendssavagemessiahzine.com Messages 903 Check in: 08.04.15 Lenovo P2 3/32 Reputation: 286 | |
Message#21 27.08.17, 11:15 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 773 Check in: 13.08.12 Xiaomi Mi Max 2 4/64 Reputation: 13 | KybyakI look at similar firmware. This which was the first? Cool icons. Post has been editedroseev - 27.08.17, 11:33 |
mobile version | Now: 05/19/19, 17:28 |