Assistant
REPLY |
MJX B3 Bugs 3 | [drone] |
Message#1 25.08.17, 19:04 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | MJX B3 Bugs 3
Device description Quadcopter MJX Bugs 3 B3 with brushless motors and suspension for GoPro action cameras and others The quadcopter on brushless MJX Bugs 3 (B3) engines will appeal to both children and adults. It can accelerate to 80 km / h, and the battery of increased power at 1800 mAh allows you to fly up to 19 minutes on one charge. Radio range control equipment 300-500 meters. The MJX Bugs 3 radio quadcopter can take on board an action camera of Go Pro format and analogs (SJCAM, EKEN and others) (mount-frame is in complete set). With large legs and supports, the quadrocopter is less dynamic, but this does not prevent it from performing flips 360 degrees with ease. With a weak battery charge quadrocopter MJX B3 Bugs control panel will warn you with a beep so that you have time to land it before than the battery is discharged (at least 1 minute before the fall), and there is also a warning about leaving the radio coverage area. Bright stylish lights for flying at night. Device characteristics Dimensions: 440 x 440 x 150 mm with screw protection Diagonal distance between engines: 310mm Engines: 1805 1800KV / 190 mm propellers Weight: 447 g (with battery / without screw protection) Battery: 7.4V 1800mAh 25C Li-Po (XT30 connector) Charging time: about 240 minutes Flight time: about 18-20 minutes (no load) / 10-15 minutes (with camera landing legs) Control distance: about 500 meters Battery 7.4V 1800mAh XT30 connector Features of the model 3D flight, LED housing lights, Brushless motors Size Medium Availability of camera option Gyro presence yes Environment exploitation outdoors Skill management For all The main material of the model High-quality plastic 2.4G equipment type Power supply of control panel 4 pcs 1.5V AA The range of the remote 300-500 m Number of control channels 4 Post has been editedKWolt74 - 08.05.18, 22:31 |
Message#2 30.08.17, 16:49 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | |
Message#3 30.08.17, 22:04 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | Has anyone tried on this quadric to use third-party batteries of larger capacity? |
Message#4 30.08.17, 22:11 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | Has anyone tried on this quadric to use third-party batteries of larger capacity? I use this one On YouTube came across a video with a battery for 3000 Post has been editedKWolt74 - 30.08.17, 22:11 |
Message#5 30.08.17, 22:13 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | Fine. I ordered one exactly the other day. As I understood it gets into the compartment. And how is the mass / flight time in comparison with the standard? Post has been editedilja43198 - 30.08.17, 23:07 |
Message#6 30.08.17, 22:17 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | |
Message#7 30.08.17, 23:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | And another question: on the remote there is a switch immediately to the right of the left stick. The manual says that it is reserved for additional functions. I disassembled the remote and it turned out that no contacts were made to it. Dummy. Although some video reviews on youtube say that this switch activates the calibration of the console when it is clamped. And in my instructions it says that this function is activated by a switch that is to the left of the right stick (pitch). I failed to activate the calibration in this way. Where is the truth? |
Message#8 31.08.17, 16:48 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | on the remote there is a switch immediately to the right of the left stick This switch does not work for me either. I have all the switches, buttons, sticks correspond to the instructions Post has been editedKWolt74 - 31.08.17, 16:51 |
Message#9 01.09.17, 01:44 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | |
Message#10 07.09.17, 15:32 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | Today, upgraded the TX02 camera to connect OSD. |
Message#11 07.09.17, 18:12 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | |
Message#12 07.09.17, 20:33 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | ilja43198, I have so far collected on the table, I have not yet fastened the bugs. Before mounting OSD tried to fly. Installed instead of the LED. The TX02 camera is included with the antenna. If the weather at the weekend is normal, I will try to fly with OSD and accomplish my goal in range. Post has been editedKWolt74 - 07.09.17, 20:38 |
Message#13 10.09.17, 01:51 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | |
Message#14 10.09.17, 09:37 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | Alteration of FPV camera 3-1 EACHINE TX02 under OSD Of course, you can immediately buy a 3-1 system in which there is a separate video output and video input or a separate camera and transmitter, but since I already had a 3-1 EACHINE TX02 FPV camera and it was OSD that I decided to try connecting it all up. In order for the information from the OSD board to be superimposed on the video signal, the video signal from the camera must be submitted to the OSD input and returned to the transmitter from the OSD output. 1. Cut in the connector connecting the camera with the transmitter contact number 1 2. Contact # 1 on the camera side is video output. 3. Contact number 1 on the transmitter side is the video input to the transmitter. 4. Contact number 3 is GND Post has been editedKWolt74 - 10.09.17, 09:39 |
Message#15 10.09.17, 09:50 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | How is the camera with the transmitter located in the head of the beetle? Camera 3-1 is freely placed in place of the LED. True, I have not yet fixed it. I think to fix it with a glue gun, and maybe some other thoughts will come. OSD and GPS are still thoughts to place in the lid. Post has been editedKWolt74 - 10.09.17, 09:53 |
Message#16 10.09.17, 15:36 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | |
Message#17 17.09.17, 14:40 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 370 Check in: 17.08.10 Xiaomi Redmi 4X 2/16 Reputation: 25 | Dependence of flight time on quadcopter weight Opportunities to take measurements in the open air yet, therefore experiments performed at home on the couch in front of the TV. He flew at a height of 30 cm to 1 meter, sometimes rising to the ceiling. Battery standard 1800 mAh. After each flight, the battery charged imax b6. The stopwatch stopped at the beginning of the flashing of the LEDs. 1. Mjx bugs 3 without legs and protection. Weight 416 g, flight time 14:59. 2. Established legs and protection. Weight 484 g, flight time 11:35. 3. Install FPV with OSD. Weight 514 g, flight time 10:46. 4. Install the EKEN 9H camera and mount for Syma x8. Weight 587 g, flight time 8:36. 5. Put the camera in the aquabox. Weight 664 g, flight time 5:44. 6. Mjx bugs 3 without legs and protection with battery 2600 mAh. Weight 437 g, flight time 18:51. After the flashing of the LEDs began, more than 30 seconds passed before the motors were completely turned off. Post has been editedKWolt74 - 17.09.17, 16:22 |
Message#18 18.09.17, 23:05 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | KWolt74, time is very dependent on wind and degree of load. With a suspended YI4K, with my legs and screw protection, I have a maximum of 8 minutes. Although no camera no more than 10 minutes. When shooting a video, you try to move smoothly, but without a camera, I’m going to break the second expenses. Therefore, the time to go about the same. Still waiting for a 2300 battery ... |
Message#19 15.10.17, 08:49 | |
a guest [offline] Group: Users Messages 6 Check in: 11.06.16 Reputation: 0 | tell me what is preferable: MJX B3 Bugs 3 (up to 19.10 on the coupon discount up to $ 77), or MJX B2 with GPS? https: //www.gearbest.c...l? wid = 26 & lkid = 11583763 |
Message#20 15.10.17, 11:00 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 508 Check in: 17.02.16 Sony Xperia X Compact Reputation: 30 | |
Message#21 15.10.17, 12:18 | |
a guest [offline] Group: Users Messages 6 Check in: 11.06.16 Reputation: 0 | Did anyone compare them "live"? |
mobile version | Now: 04/18/19, 16:35 |