Everything stated below is for informational purposes only, all your actions with your equipment are only under your personal responsibility !! READ THE FIRST PAGE, NOT ONLY THE CAP, BELOW DETAILED EXAMPLES AND RECOMMENDATIONS ->method for 3.0<- not the same as for 2.0. obd and demo is not available, choose the right! Which one to buy and download brands for yourself! from the diag zone of individuals. Obd will not go who managed to save the obd and demo, then good ... an example of those who are too lazy to read, and after these actions they create even more problems for themselves:
-->installed easydiag 2.0, upgraded to v11.63, now do not boot even according to the purchased program<-- read carefully the first page. Not just a hat, and do not write stupid questions for which answers have already been written in the subject! after August 31, 2017 do not wait for manna from heaven .... the freebie is over, buy a whistle at once with 2 marks, approximately80 - 90$the price has gone up
or without stamps, but in any case you will have to buy a stamp for $ 50, according to the price tag it will be the same, but if you immediately buy it, you will get 2 stamps.
and it is also not possible to access the obd, then you need to find this obd or demo on the office website x431, which you will have to buy for 1 or zero bucks, in my case a demo was bought for 0 bucks.
but it was still in August, now 1 brand costs 50 bucks, and as a gift, it is NOT ALREADY allowed to download obd or demo, the keyword is NO absolutely WORKS ONLY ON ANDROID DEVICES (4.4 - 5.5, on the above version or below ... as lucky, with xiaomi problems), FIRMWARE FOR THE YELLOW WHISTLE Lord Anyone with an adapter number contains * 90115 * and newer numbers (BOOT version: 1.23.001, software version: 10.01) firmware 11.55, 11.57 with new marks, after August, kill the whistle! FW V11.57EasydiagFW V11.63 software 10.01 -native killer firmware 1. In no casedo not connect native applicationezdiag (Easydiag)from the playmarket with the adapter in any way (not updating the firmware, not connecting to the car via EOBD / DEMO or any other bought MARK for your car!)!
2. changes from Easy concerns for:EasyDiag 2.0, golo EasyDiag, M-Diag : Please download the app.ezdiag . From Apple App. Store or Google Play Store to activate and operate! Carline pay software is available for 1 year download.
(With the native EasyDiag application ONLY we download all DEMO / EOBD variants or other brands without connecting to the adapter). 3. We save all available native versions of brands, or we buy the correct brand, or who managed to download earlier (EOBD / DEMO) in a safe place.
4. Delete the native EasyDiag application with data cleaning / cache, manually delete the EasyDiag folder.5. We put the shell X-431 Pro (any, at least X-431 Pro3),
We work with the adapter ONLY through this X-431 Pro shell - we update the firmware, run EOBD / DEMO of different versions, etc.,
Watch what firmware in the whistle is just the same shell.
5.1. In the language, the language is switched by the device's keyboard layout, first we put the ru or en and then we launch the X431 shell .. New adapters with serial number are fresh * 90156 * are locked from the factory, you need to flash through DZ or tul kit, read the topic, everything you need to eat.
P.S. There was an adapter with the number * 9014 * for a long time, I did not connect the adapter to my native prog, I flashed the adapter with a ProShell shell 11.53->
11.52 and now all brands work fine! 3 peaks when connected.
Posted 08/23/2017 08:04 AM: Optimization instructions:
INSTRUCTIONS FOR INSTALLATION OF NEW VERSIONS OF THE BREAK (AFTER AUGUST 2017): * under the name MARKA can be any name: obd, toyota, bmw .. etc. , read carefully .
1. download the application
ezdiag . From Apple App. Store or Google Play Store to activate and operate! Carline pay software available for download for 1 year
2. We register the device through the ezdiag shell (serial number + pin code)
(
Install the native shellwith PlayMarket
Easydiag Do not connect to the whistle! check if there is access to download other versions of obd)
2.2 - after August 31, access for downloading obd and demo is denied, for this you need to buy 1 mark if you bought just a whistle or buy it immediately with 2 marks (with 1st mark).
3. Download the brand EOBD2 * ("Menu" ->"Update with a single button", there we find the right version .. after the last update, only the latest version (mark *) eobd2 * and demo * are available
4. Remove the native shell of the one that is from PlayMarket, we clean out the excess.
5. Install X431_PRO3S_3_10.020-1.apk, open the installed X-DIAG_PRO3S and close it (we do not do anything there, the program creates the necessary folders)
6. Remove X-DIAG_PRO3S
7. Copy stamps in “Device Memory” ->"cnlaunch" ->"X431Pro3S" ->"96xxxxxxxxxxxxx" (the folder should be called the serial number of the device) ->"diagnostic" ->"vehicles"
eight,. you may also need a patch, it all depends on the database of the break-off, they are usually clean, and the patch is needed for your own version of the license and license.
8. Copy the file LICENSE.DAT
OF "Device Memory" ->"cnlaunch" ->"EasyDiag" ->"96xxxxxxxxxxxxx" (the folder should be called the serial number of the device) ->"diagnostic" ->"vehicles" ->"EOBD2" (file LICENSE.DAT file) in the folder with the program, for example "Device memory" ->"cnlaunch" ->"X431Pro3S" ->"96xxxxxxxxxxxxx" (the folder should be called the serial number of the device) ->"diagnostic" ->"vehicles" ->"AUDI" ->"V27.80" (here is the license, if you also need the patch files)
9. Reinstall X431_PRO3S_3_10.020-1.apk
10. Using X431_PRO3S_3_10.020-1.apkand firmware 11.52 .
11 - NEW: for every whistle after unlocking (as well as bare) the shell X431_PRO3S_3_11.11.apk (X431_PRO3S_3_11.11_mod.apk - sees more than one version)
firmware 11.57 10.03. 11.57 02.24, 11.60 02.24 (it is also possible below) work well with the base August, November and more recent (there may be some problems with some brands)
M-diag whistles are usually clean (without a factory lock), they work with different firmware,
the latter also has an available payout of 22.53 *- now not available, buy with the brand *!
SHELLS WORK WITH INTERNAL MEMORY OF PHONE, DOES NOT WORK WITH USB FLASH,
For a flash drive, you need to have a root and additional programs and that is not a fact that will work, but it is still possible. for some shells, the path may differ, depending on which one you want to use, so this must be taken into account, some examples and the path to the folders ..
The path to the brands should look like this: phone memory \ cnlaunch \ X431Pro3 \ SERIAL_NUMBER \ diagnostic \ VEHICLES \ - here is a list of brands
The path to the firmware should look like this: phone memory \ cnlaunch \ X431Pro3 \ SERIAL_NUMBER \ DIAGNOSTIC \ Configure \ Download \ - here there are 2 firmware files
The path to the brands should look like this: phone memory \ cnlaunch \ X431Pro3S \ SERIAL_NUMER \ diagnostic \ VEHICLES \ - here is the list of brands
The path to the firmware should look like this: phone memory \ cnlaunch \ X431Pro3S \ SERIALNUMER \ DIAGNOSTIC \ Configure \ Download \ - here there are 2 firmware files
The path to the brand should look like this: phone memory \ cnlaunch \ SERIAL_NUMBER \ diagnostic \ VEHICLES \ - here is a list of brands
The path to the firmware should look like this: phone memory \ cnlaunch \ SERIAL_NUMBER \ DIAGNOSTIC \ Configure \ Download \ - here there are 2 firmware files
X431_PRO3S_3_10.020 - the flash drive does not see! works with memory (disk) phone or tablet. shell for fresh brands -
X431 EURO TAB_4.03.023_EOBD2.zip(34.77 MB)
what to do about it there are specific examples above this message and below it is chewed up in more than detail, do just that without any other gestures and you will succeed
go over from the header to the second instruction post with a specific example of what and where for the shell X431_PRO3S and obd 22,51 and not only for ... Concerns for: EasyDiag 2.0 and golo EasyDiag (M-Diag does not stop and sew in 3 stages NADOD! ) - since now they come all locked up,
then they should be flashed in three stages through a diagonal zone (so convenient) or talked,
in the subject discussed what and how, nothing complicated. After that, the device will work on any firmware with any version of the brand and license, it is checked personally.
a small explanation of where to go and what to do to unblock your whistle pumping .. syudy EasyDiag_3.00.009.apk.zip(34.44 MB)
GoloMasterDiag3.0_5.4.8.apk.zip(44.01 MB)
EZdiag_6.4.2.apk.zip(18.62 MB)
EasyDiag_2.01.013.apk.zip(28.3 MB)
EasyDiag_3.00.012.apk.zip (33.11 MB)
EZdiag_6.4.4.apk.zip(18.68 MB)
firmware in three stages through diazone.rar(1.19 MB)
Post has been editedSerhgg - 02.07.19, 12:19