MuHuCTP23 @ 11/21/17, 07:55
I have no problems described above. Everything works well.
Well, so I do not argue, I am to myself. It seems to be the same device, the same apk set, but you have this item, but I do not. Probably, during my use of different Sony I have exhausted the limit of using double tapas :)
MuHuCTP23 @ 11/21/17, 07:55
Look at your dpi value.
If you change the dpi with your hands, it is reset after a reboot. We were advised to put a small screen viewing mode, it just turns out to be 640. For me, it's fine. The main measure for me is to see the numbers when I sit in the car, and the tablet in the holder. On sony, I saw charge numbers without problems, but here with this dpi you have to bend over. But this is a trifle, but in other situations everything is fine.
MuHuCTP23 @ 11/21/17, 07:55
Below is a screenshot of the GravityBox - Status Bar Settings.
I'm not saying that he does not work at all. He set the daw, works twice to the third. And the curtain does not stretch the first time. To make it clearer: the screen is blocked, unlock the print. I make a double slippers on the state line. Does not work. Once again - does not work. Trying to pull the curtain down - does not go. Once again - goes. After you stretch out the curtain once, the double slippers work immediately. If you do not stretch, then almost never at once. If you turn off the double slippers in the gravitybox, then there are no problems with the curtain. It seems that when the double tap is turned on, the touch in the state of the state begins to dull.
MuHuCTP23 @ 11/21/17, 07:55
Below is a screenshot of the lock screen.
Well, on the screen the battery is in a circle, the numbers are small. I'm talking about the option of individual numbers that can be made larger in size, so there are no locks on the screen.
In addition, the unstable work got tired of you, when you have to regularly reinstall the framework.
As a result, it is not suitable for customization for my specific requests. Oh well, nothing critical, I'll get used to everything))
Post has been editedSergeySN - 21.11.17, 09:35