4 pagesV  1 2 3 4 > »  
 
REPLY
> TP-LINK TL-WR902AC - Discussion | Wi-Fi Router: 300Mb \ s - 433Mb \ s | 1x100Mb | 3G 4G
Ageron
Message#1
16.08.17, 00:27
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

TP-LINK TL-WR902AC- discussion »
Wi-Fi Router: 2.4GHz (300Mbit \ s) - 5GHz (433Mbit \ s) | 1 • 100Mbit \ s | USB: 3G 4G


Attached Image

Description
Portable design - small size and weight allow you to take a router on the road and create a Wi-Fi network when connected to an Ethernet, 3G / 4G USB modem or WISP network
Dual band Wi-Fi and AC750 - a powerful and fast connection to view HD video on all devices
Mobile 3G / 4G connection sharing *: compatible with multiple UMTS / HSPA / EVDO 3G USB modems. Check compatibility list
Select the connection mode - suitable for Wi-Fi at home, in a hotel or on a trip
Convenient Power - Micro USB port for connecting to an adapter, portable charger or laptop
Multifunctional USB port - support file-, media-, FTP-server
Additional Images
Attached Image
Attached Image
Specifications
HARDWARE CHARACTERISTICS
Interface 1 10/100 Mbps WAN / LAN port
1 reset button
1 USB 2.0 port
1 mode switch
1 WPS button
External power supply 5V / 2A
Dimensions (WxLxH) 74 x 67 x 22 mm
Antenna Type Built
PARAMETERS OF WIRELESS MODULE
IEEE 802.11ac / n / a 5 GHz wireless networking standards
IEEE 802.11b / g / n 2.4 GHz
The frequency range (reception and transmission) 2400-2483.5 MHz
5150-5350 MHz
Transfer speed 5 GHz: up to 433 Mbps (only with Wi-Fi adapter 11ac);
up to 150 Mbps with Wi-Fi adapter 11n
2.4 GHz: up to 300 Mbps
Sensitivity (reception) 11a 54 Mbit / s: -76 dBm;
11ac VHT20 MCS8: -70 dBm;
11ac VHT40 MCS9: -65.5 dBm;
11ac VHT80 MCS9: -61.5 dBm
2.4 GHz:
11g 54 Mbps: -76 dBm 11n; HT20 MCS7: -74 dBm;
11n HT40 MCS7: -71 dBm
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless features Wi-Fi on / off, WDS bridge, WMM, wireless statistics
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Encryption
CHARACTERISTICS OF SOFTWARE
QoS (data prioritization) WMM, bandwidth control
Management Access Control
Local management
Remote control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access)
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) DoS, firewall SPI, filter by IP address / domain name, bind by IP address and MAC address
Protocols Supported IPv4
2.4 GHz guest network guest network
one 5 GHz guest network
OTHER
CE, FCC, RoHS certification
Scope of Delivery TL-WR902AC
Power adapter
Ethernet RJ45 cable
Quick Tin Guide
System requirements Windows 10 / 8.1 / 8/7 / Vista / XP, Mac OS or Linux-based OS
Environmental Parameters Operating Temperature: 0 в„ѓ - 40
Storage temperature: -40 в„ѓ - 70 в„ѓ
Operating Humidity: 10% - 90%, without condensation
Humidity during storage: 5% - 90%, without condensation
Firmware


There is no curator in the subject. For questions about filling caps, please contactauto RUin QMS or moderators section through a buttonPictureunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedAgeron - 16.08.17, 00:37
Ageron
Message#2
16.08.17, 10:54
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

Found more LEDE firmware fromhometunnel.net
Vech
Message#3
22.08.17, 11:18
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7896
Check in: 27.06.06
Xiaomi Mi A1 4/64

Reputation:-  476  +

Is there such a thing on Ali?


--------------------
HTC Universal128mb G3 / Toshiba Portege G900 /

HTC HD2 download

/ Philips Xenium W632 / Samsung Galaxy Note II / Xiaomi Mi A1
Ageron
Message#4
22.08.17, 11:22
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

VecH @ 08.22.17, 11:18*
Is there such a thing on Ali?

No, I bought at a local store for 1700rub
Vech
Message#5
22.08.17, 11:50
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7896
Check in: 27.06.06
Xiaomi Mi A1 4/64

Reputation:-  476  +

* Ageron, if you have sewed Lede, please show the dmesg log


--------------------
HTC Universal128mb G3 / Toshiba Portege G900 / HTC HD2 / Philips Xenium W632 / Samsung Galaxy Note II / Xiaomi Mi A1
Ageron
Message#6
22.08.17, 11:56
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

VecH @ 08.22.17, 11:50*
if Lede sewed, please show the dmesg log


hold on
root @ LEDE: ~ # dmesg
[0.000000] Linux version 4.4.83 (buildbot @ buildslave) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4697-736950e)) # 0 Fri Aug 18 16:47:27 2017
[0.000000] MyLoader: sysp = fe9f5e9f, boardp = cf115f15, parts = 1eb1da71
[0.000000] bootconsole [early0] enabled
[0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[0.000000] Determined physical RAM map:
[0.000000] memory: 04000000 @ 00000000 (usable)
[0.000000] Initrd not found or empty - disabling initrd
[0.000000] No valid device tree found
[0.000000] Zone ranges:
[0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[0.000000] Movable zone start for each node
[0.000000] Early memory node ranges
[0.000000] node 0: [mem 0x0000000000000000-0x00000033ffffff]
[0.000000] Initmem setup node 0 [mem 0x0000000000000000-0-0x000000300ffffff]
[0.000000] On node 0 totalpages: 16384
[0.000000] free_area_init_node: node 0, pgdat 8043a4d0, node_mem_map 81000000
[0.000000] Normal zone: 128 pages used for memmap
[0.000000] Normal zone: 0 pages reserved
[0.000000] Normal zone: 16384 pages, LIFO batch: 3
[0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc = 1 * 32768
[0.000000] pcpu-alloc: [0] 0
[0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[0.000000] Kernel command line: board = TL-WR902AC-V1 = squashfs, jffs2 noinitrd
[0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[0.000000] Writing ErrCtl register = 00000000
[0.000000] Readback ErrCtl register = 00000000
[0.000000] Memory: 59968K / 65536K (3128K kernel code, 148K rwdata, 784K rodata, 284K init, 205K bss, 5568K reserved, 0K cma-reserved)
[0.000000] SLUB: HWalign = 32, Order = 0-3, MinObjects = 0, CPUs = 1, Nodes = 1
[0.000000] NR_IRQS: 51
[0.000000] Clocks: CPU: 650.000MHz, DDR: 391.186MHz, AHB: 216.666MHz, Ref: 25.000MHz
[0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
[0.000010] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
[0.008256] Calibrating delay loop ... 432.53 BogoMIPS (lpj = 2162688)
[0.071114] pid_max: default: 32768 minimum: 301
[0.076137] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[0.083125] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[0.093982] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275750000 ns
[0.104426] futex hash table entries: 256 (order: -1, 3072 bytes)
[0.112460] NET: Registered protocol family 16
[0.119012] MIPS: machine is TP-LINK TL-WR902AC v1
[0.345881] registering a PCI controller with io_map_base unset
[0.364909] PCI host bridge to bus 0000: 00
[0.369256] pci_bus 0000: 00: root bus resource [mem 0x10000000-0x11ffffff]
[0.376568] pci_bus 0000: 00: root bus resource [io 0x0000]
[0.382448] pci_bus 0000: 00: root bus resource [??? 0x00000000 flags 0x0]
[0.389613] pci_bus 0000: 00: No busn resource found for root bus, will use [bus 00-ff]
[0.398008] pci 0000: 00: 00.0: [168c: 0050] type 00 class 0x028000
[0.398040] pci 0000: 00: 00.0: invalid calibration data
[0.403498] pci 0000: 00: 00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[0.403558] pci 0000: 00: 00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[0.403630] pci 0000: 00: 00.0: supports D1
[0.403645] pci 0000: 00: 00.0: PME # supported from D0 D1 D3hot
[0.403880] pci_bus 0000: 00: busn_res: [bus 00-ff] end is updated to 00
[0.403922] pci 0000: 00: 00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
[0.411643] pci 0000: 00: 00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
[0.419307] pci 0000: 00: 00.0: using irq 40 for pin 1
[0.425623] clocksource: Switched to clocksource MIPS
[0.432538] NET: Registered protocol family 2
[0.438275] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[0.445718] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[0.452439] TCP: Hash tables configured (established 1024 bind 1024)
[0.459288] UDP hash table entries: 256 (order: 0, 4096 bytes)
[0.465470] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[0.472539] NET: Registered protocol family 1
[0.477306] PCI: CLS 0 bytes, default 32
[0.483361] Crashlog allocated RAM at address 0x3f00000
[0.507057] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[0.513227] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[0.526913] io scheduler noop registered
[0.531062] io scheduler deadline registered (default)
[0.536956] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[0.546664] console [ttyS0] disabled
[0.570610] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[0.579726] console [ttyS0] enabled
[0.587280] bootconsole [early0] disabled
[0.602412] m25p80 spi0.0: found s25fl064k, expected m25p80
[0.608281] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[0.613258] 4 cmdlinepart partitions found on MTD device spi0.0
[0.619382] Creating 4 MTD partitions on "spi0.0":
[0.624339] 0x000000000000-0x000000020000: "u-boot"
[0.632344] 0x000000020000-0x000000750000: "firmware"
[0.655900] 2 tplink-fw partitions found on MTD device firmware
[0.662037] 0x000000020000-0x000000180000: "kernel"
[0.668828] 0x000000180000-0x000000750000: "rootfs"
[0.675960] mtd: device 3 (rootfs) set to be root filesystem
[0.681857] 1 squashfs-split partitions found on MTD device rootfs
[0.688281] 0x000000400000-0x000000750000: "rootfs_data"
[0.695931] 0x000000750000-0x0000007f0000: "tplink"
[0.703062] 0x0000007f0000-0x000000800000: "art"
[0.735838] libphy: ag71xx_mdio: probed
[1.328583] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1: 04 [uid = 004dd042, driver = Generic PHY]
[1.338813] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: MII
[1.347698] NET: Registered protocol family 10
[1.357420] NET: Registered protocol family 17
[1.362106] bridge: automatic filtering via arp / ip / ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[1.375349] 8021q: 802.1Q VLAN Support v1.8
[1.381974] hctosys: unable to open rtc device (rtc0)
[1.393255] VFS: Mounted root (squashfs filesystem) readonly on device 31: 3.
[1.403063] Freeing unused kernel memory: 284K
[2.284015] init: Console is alive
[2.287924] init: - watchdog -
[3.410356] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[3.455875] usbcore: registered new interface driver usbfs
[3.461621] usbcore: registered new interface driver hub
[3.467265] usbcore: registered new device driver usb
[3.479542] ehci_hcd: USB 2.0 Enhanced Host Controller (EHCI) Driver
[3.488551] ehci-platform: EHCI generic platform driver
[3.494063] ehci-platform ehci-platform: EHCI Host Controller
[3.500118] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[3.510453] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[3.535666] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[3.543215] hub 1-0: 1.0: USB hub found
[3.547603] hub 1-0: 1.0: 1 port detected
[3.552755] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[3.562888] init: - preinit -
[4.479694] IPv6: ADDRCONF (NETDEV_UP): eth0: link is not ready
[4.508836] random: procd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
[7.861621] jffs2: notice: (399) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[7.879769] mount_root: switching to jffs2 overlay
[7.907919] urandom-seed: Seeding with /etc/urandom.seed
[8.068123] procd: - early -
[8.071236] procd: - watchdog -
[8.704978] procd: - watchdog -
[8.708661] procd: - ubus -
[8.831674] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.849224] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.859163] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.868650] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.878714] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.888162] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.897708] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.907300] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[8.917125] procd: - init -
[9.409547] kmodloader: loading kernel modules from /etc/modules.d/*
[9.431120] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[9.439496] Backport generated by backports.git backports-20160324-13-g24da7d3c
[9.545332] PCI: Enabling device 0000: 00: 00.0 (0000 -> 0002)
[9.551470] ath10k_pci 0000: 00: 00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[9.771123] ath10k_pci 0000: 00: 00.0: Direct firmware load for ath10k / pre-cal-pci-0000: 00: 00.0.bin failed with error -2
[9.782255] ath10k_pci 0000: 00: 00.0: Falling back to user helper
[9.921354] firmware ath10k! Pre-cal-pci-0000: 00: 00.0.bin: firmware_loading_store: map pages failed
[10.042372] ath10k_pci 0000: 00: 00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000: 0000
[10.051979] ath10k_pci 0000: 00: 00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[10.066247] ath10k_pci 0000: 00: 00.0: firmware ver 10.2.4-1.0-00013 api 5 features no-p2p, ignore-otp, skip-clock-init, mfp crc32 14a57ac6
[10.142838] ath10k_pci 0000: 00: 00.0: board ignore it
[10.150327] ath10k_pci 0000: 00: 00.0: Direct firmware load for ath10k / QCA9887 / hw1.0 / board-2.bin failed with error -2
[10.161143] ath10k_pci 0000: 00: 00.0: Falling back to user helper
[10.242229] firmware ath10k! QCA9887! Hw1.0! Board-2.bin: firmware_loading_store: map pages failed
[10.273804] ath10k_pci 0000: 00: 00.0: board_file api 1 bmi_id N / A crc32 546cca0d
[11.330731] ath10k_pci 0000: 00: 00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[11.437838] ath: EEPROM regdomain: 0x0
[11.437862] ath: EEPROM indicates default country code should be used
[11.437871] ath: doing EEPROM country->regdmn map search
[11.437891] ath: country maps to regdmn code: 0x3a
[11.437902] ath: Country alpha2 being used: US
[11.437911] ath: Regpair used: 0x3a
[11.586573] nf_conntrack version 0.5.0 (941 buckets, 3764 max)
[11.734003] xt_time: kernel timezone is -0000
[11.745398] ip_tables: (C) 2000-2006 Netfilter Core Team
[11.764349] PPP generic driver version 2.4.2
[11.772023] NET: Registered protocol family 24
[11.797301] ath: EEPROM regdomain: 0x0
[11.797330] ath: EEPROM indicates default country code should be used
[11.797339] ath: doing EEPROM country->regdmn map search
[11.797365] ath: country maps to regdmn code: 0x3a
[11.797376] ath: Country alpha2 being used: US
[11.797384] ath: Regpair used: 0x3a
[11.809705] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[11.817296] ieee80211 phy1: Atheros AR9531 Rev: 2 mem = 0xb8100000, irq = 47
[11.904497] kmodloader: done loading kernel modules from /etc/modules.d/*
[11.119959] random: jshn: uninitialized urandom read (4 bytes read, 21 bits of entropy available)
[19.249917] device eth0 entered promiscuous mode
[19.265742] IPv6: ADDRCONF (NETDEV_UP): br-lan: link is not ready
[19.419249] eth0: link up (100Mbps / Full duplex)
[19.424024] br-lan: port 1 (eth0) entered forwarding state
[19.429712] br-lan: port 1 (eth0) entered forwarding state
[19.535758] IPv6: ADDRCONF (NETDEV_CHANGE): br-lan: link becomes ready
[20.734122] ath: EEPROM regdomain: 0x8283
[20.734150] ath: EEPROM indicates we should expect a country code
[20.734163] ath: doing EEPROM country->regdmn map search
[20.734174] ath: country maps to regdmn code: 0x3
[20.734186] ath: Country alpha2 being used: RU
[20.734194] ath: Regpair used: 0x3
[20.734207] ath: regdomain 0x8283 dynamically updated by user
[20.734321] ath: EEPROM regdomain: 0x8283
[20.734330] ath: EEPROM indicates we should expect a country code
[20.734342] ath: doing EEPROM country->regdmn map search
[20.734352] ath: country maps to regdmn code: 0x3
[20.734360] ath: Country alpha2 being used: RU
[20.734369] ath: Regpair used: 0x3
[20.734378] ath: regdomain 0x8283 dynamically updated by user
[21.425687] br-lan: port 1 (eth0) entered forwarding state
[22.735114] IPv6: ADDRCONF (NETDEV_UP): wlan1: link is not ready
[22.746044] device wlan1 entered promiscuous mode
[23.192914] IPv6: ADDRCONF (NETDEV_CHANGE): wlan1: link becomes ready
[23.199807] br-lan: port 2 (wlan1) entered forwarding state
[23.205552] br-lan: port 2 (wlan1) entered forwarding state
[25.195633] br-lan: port 2 (wlan1) entered forwarding state
[46.622603] random: nonblocking pool is initialized
Vech
Message#7
22.08.17, 13:18
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7896
Check in: 27.06.06
Xiaomi Mi A1 4/64

Reputation:-  476  +

650 mhz
8mb flash
64 mb ram

Patch for Lede not lying around?


--------------------
HTC Universal128mb G3 / Toshiba Portege G900 / HTC HD2 / Philips Xenium W632 / Samsung Galaxy Note II / Xiaomi Mi A1
Ageron
Message#8
22.08.17, 13:35
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

VecH @ 08.22.17, 13:18*
Patch for Lede not lying around?


why patch?

source code here

do not need anything else,
make image PROFILE = tl-wr902ac-v1 PACKAGES = "uhttpd uhttpd-mod-ubus libiwinfo-lua luci-base luci-app-firewall luci-mod-admin-full luci-theme-material -luci-theme-bootstrap luci-proto -ppp kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca9887 -swconfig -uboot-envtools -ip6tables -odhcp6c -kmod-ipv6 -kmod-ip6tables "



Specification:

- 650/391/216 MHz (CPU / DDR / AHB)
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (GPIO-controlled power)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch
- UART pads on PCB (TP1 ->TX, TP2 ->RX, TP3 ->GND, TP4 ->3V3, jumper resitors are missing on TX / RX lines)
- 1x micro USB (for power only)

Post has been editedAgeron - 22.08.17, 13:39
Vech
Message#9
22.08.17, 13:37
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7896
Check in: 27.06.06
Xiaomi Mi A1 4/64

Reputation:-  476  +

So the patch has already been included in the general branch, it pleases


--------------------
HTC Universal128mb G3 / Toshiba Portege G900 / HTC HD2 / Philips Xenium W632 / Samsung Galaxy Note II / Xiaomi Mi A1
Vech
Message#10
22.08.17, 17:47
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7896
Check in: 27.06.06
Xiaomi Mi A1 4/64

Reputation:-  476  +

Is the power supply to the USB port pass-through from MicroUSB or is it filtered (besides the GPIO trigger)?


--------------------
HTC Universal128mb G3 / Toshiba Portege G900 / HTC HD2 / Philips Xenium W632 / Samsung Galaxy Note II / Xiaomi Mi A1
vovan26_
Message#11
22.08.17, 22:56
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3427
Check in: 15.06.16

Reputation:-  399  +

* Ageron
This is not the source, this is a ready night cut.
With the help of image builder, of course you can assemble, but this is not very interesting.
Link to source: git clonehttps://github.com/lede-project/source.git
Look:https://github.com/lede-project/source.git

Post has been editedvovan26_ - 22.08.17, 23:14


--------------------
The desire to get an answer implies the ability to formulate a question. (I.V. Stalin)
I do not answer general questions in a personal, ask it on the forum.
Linux OS Debian
Ageron
Message#12
23.08.17, 08:49
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

oh, we need specialists to build the firmware,

I configure pppoe,
I enter my login password, click save and apply
and everything hangs like

after reboot I can not connect via wifi

Posted 08/23/2017 08:51 AM:

Ageron @ 08/23/17, 08:49*
Is the power supply to the USB port pass-through from MicroUSB or is it filtered (besides the GPIO trigger)?


I could not open it, the latches are very dense, traces of cracking will be seen

here it canwill help
Vech
Message#13
23.08.17, 10:55
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7896
Check in: 27.06.06
Xiaomi Mi A1 4/64

Reputation:-  476  +

* Ageron
No, it does not help, it is too small, the wiring is not visible on the board


--------------------
HTC Universal128mb G3 / Toshiba Portege G900 / HTC HD2 / Philips Xenium W632 / Samsung Galaxy Note II / Xiaomi Mi A1
ubuntu-fox
Message#14
31.10.17, 11:22
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1010
Check in: 17.09.11
Sony Xperia C4

Reputation:-  27  +

If you connect the network to it from the provider, will it distribute Wi-Fi? Work as a router?
TRENDnet TEW-684UB WI-FI receiver. Will it connect at 5GHZ?


--------------------
Sony xperia cosmos
Ageron
Message#15
03.11.17, 08:53
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

ubuntu-fox @ 10/31/17 11:22*
If you connect the network to it from the provider, will it distribute Wi-Fi? Work as a router?
TRENDnet TEW-684UB WI-FI receiver. Will it connect at 5GHZ?



LAN is connected to the provider via PPPoE

distributes 5 and 2.4 at the same time, the speed is good, not heated


can see the native firmware emulatorhere
login admin
pass admin
edward1q2w3e
Message#16
05.11.17, 11:41
Visitor
**
[offline]

Group: Active users
Messages 15
Check in: 11.01.13
Fly Whiz IQ240

Reputation:-  0  +

Help, I updated the router with this file firmware / hometunnel-tl-wr902ac-factory.bin. The router is now dead, only the power is on

Post has been editededward1q2w3e - 05.11.17, 11:45
benedict2007
Message#17
11.11.17, 20:41
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 13.04.12

Reputation:-  0  +

The same garbage.
Sewing up different firmware, and as a result, brickid.
Does anyone have a recovery bin with the original?
benedict2007
Message#18
11.11.17, 20:50
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 13.04.12

Reputation:-  0  +

In general, no single firmware firmware.
I downloaded the official one and also downloaded it via tftp - everything works.
does not want to take ice in any version
benedict2007
Message#19
11.11.17, 21:25
Visitor
**
[offline]

Group: Users
Messages 13
Check in: 13.04.12

Reputation:-  0  +

The main problem is that when you hook up a modem in usb, the distribution through the wafer works, but the localhost is chopped off.
LEDE can not deliver.
Are there any other options?
Something unfortunate pokupochka proved.
As12
Message#20
16.11.17, 15:28
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 202
Check in: 10.11.08

Reputation:-  1  +

The main problem is that when you hook up a modem in usb, the distribution through the wafer works, but the localhost is chopped off.
Same problem. Any other firmware?
Ageron
Message#21
16.11.17, 21:51
Novice
***
[offline]

Group: Active users
Messages 42
Check in: 16.11.08
Xiaomi Redmi 3S Prime

Reputation:-  7  +

benedict2007 @ 11.11.17, 21:25*
The main problem is that when you hook up a modem in usb, the distribution through the wafer works, but the localhost is chopped off.


the developer acknowledged this error, a hardware error
affects only version v1

In version v3, all fixed

4 pagesV  1 2 3 4 > » 


 mobile version    Now: 06/16/19 07:30