Put the firmware AOSP Extended v4.6 20180418-1704 from Pranavaryans. What I liked - autonomy is comparable to Miui, many settings, finally normal android)
When charging is heated stronger MIUI, but not critical. Fast charging works.

From bugs:
- Periodically crashes the error in the Equalizer program.
- The built-in player for Music Retro Music is not started (it writes - a failure occurred in the application), I had to remove.
- The brightness repulsion works with a delay of 5-20 seconds or does not work at all (annoying when he has already left the illuminated zone, and the phone is such a time - and added more brightness).
- The built-in Google camera removes noticeably worse than the camera on MIUI. Noise, graininess. Few settings. I tried several cameras from thisTopicsThey or are not installed (the error "Pack is damaged"), or fly when started, or give an error of access to the chamber.

Who will tell how to defeat the last two problems - camera and autostarity?

I put this camera, without Camera_2api_Addon2, it will not work for you! From TWRP to flash the archive Camera_2api_addon2.zip and only then apk! , checked on several firmware 8.1 and 7.1, HDR + and bokeh everything works as it should, is the best camera for Makh2


_Gcam_5.1.018 super.apk.(36.81 MB)
Camera_2api_addon2.zip.(179.06 KB)


Post has been editedavatar.evg - 27.07.18, 19:47

Set Dolby Atmos.

Posted on 07/27/2018, 12:19:

https://androidFilehost.com/?w=Files&flid=250342.

https://yadi.sk/d/dxfumqsa3znhyi.


GoogleCamera-Pixel2Mod-Arnova8G2-V8.apk(37.24 MB)
60_120fps_hevc_mimax2.zip.(283,88 KB)
60_120fps_mimax2.zip.(283.83 KB)


Post has been editeddestroyer71 - 28.07.18, 15:07

Only there is not a chamber Google, but a snapping camera ....

That is, using TWRP MOD you can set firmware from this list?

vova13415,
You would even read the list of devices supported. Our smart is not in officially supported in anyone. So I would like to put it.

tagiyev83,
avatar.evg,
Thank you answered! I will try.

How to remove the delay in triggering, someone knows?

I also noticed a fingerprint mistakenly more often than on Miui. It seems that a trifle, the second time to attach a finger, and per day accumulates, annoying) I tried and reprints, and change your hand.

Has anyone conducted experiments with Project Treble? Our body appeared in unofficial support.

thengabbot ,
This is me yesterday the author of the topic wrote to our device to be added.
It works with Treble.
Naders for this two: from Pixel Experience, and Hardrock 13.1 Treble
VENDOR SECTION WH ALL ONLY ONE, from PIXEL EXPERIENCE

Post has been editedVirusMobile - 29.07.18, 16:30

VirusMobile And please tell me how to sew, there are instructions? Or is it common?

thengabbot ,
Instructions are generally from the topic Treble.

Only here I am still to answer my statement that everything works.
The firmware starts, but bugs through Chur a lot, plus the reboot while running time. Some cant with drivers in the VENDOR section.

Only Pixel Experience Treble works well

Post has been editedVirusMobile - 29.07.18, 17:12

VirusMobile and TWRP standard will suit?

thengabbot ,
No, the modified version of TWRP laid out by Pixel Experience
twrp_mod.img(19.14 MB)

VirusMobile , All the same, tell pliz what instruction to take? Thanks in advance.

thengabbot,
With bricks for a long time not tormented?

thengabbot,
Sketch in brief myself:

0) Make backup, just advise you to keep the standard version of TWRP on the device to roll back

1) Downloadingmodified recovery : TWRP_MOD.
2) Downloadingfirmware : Pixel Expirience Treble
3) Downloadingroot : Magisk 16.7
4) Restart into TWRP and install a modified versionTWRP_mod.img From paragraph 1
5) Restart Recovery
6) MakingWipe : Dalvik / Art Cache, System, Data, Cache
7) Install the firmwarePixel Expirience Treble as ordinary zip.
8) We go to TWRP to the item"Mounting" , remove all the checkboxes and re-set on: "System", "Data", "Cache", "Vendor"
9) InstallMagisk 16.7 as ordinary zip.

Ready, Firmware with Trebel support is installed, works.

Now about working with GSI images:
1) Swing the Treble firmware you are interested in in the form of GSI (there will be only firmware in the archive.img, immediately remove). It is suitable for usARM64 A-ONLY
2) Go to TWRP
3) Making Wipe: Dalvik / Art Cache, System, Data, Cache
4) In TWRP, choose "Installation" ->"Installing IMG" and choose downloaded firmware.img
5) To the TWRP question about the form of the selected image, you answer "System Image" (the first item)

We are waiting for the end of the firmware, restart. There will be a couple of reboots and the firmware starts.

But, as I wrote above, there is a glitch in the Vendor section. Something out of drivers is missing.
Can generally find the missing in VENDOR-E from the working System

And again:Make backups! Time takes a couple of minutes, but the nerves will save.

VirusMobile , And if you make a backup in TWRP MOD, then you can restore? And how do you yourself, I'm talking about Pixel Experience?

Post has been editedthengabbot - 29.07.18, 19:12

Yes, you can restore your own backup to the same TWRP. Repeatedly restored. But backup from the original TWRP is unlikely to be restored.


I put myself on a dawning, I like it. Bugs as on any OREO - no sound is regulated during a conversation and speaker external without low frequencies.
She asked for all the time two rebuts, but also those on the Web View (in Kate Mobile very actively brush-brush, pink and ... op, reboot)
There were no other inconvenience for myself, but on the firmware - you know, it's all taste.

thengabbot , VirusMobile , I read about the Web View yesterday, which can be corrected by updating the WebView itself. I will try to try later.