ASUS RT-N13U B1 - discussion | Wi-Fi Router: 300Mb \ s | 5x100Mb | x1 (3g, torrent, ftp, print server)



Rep: (29)
ASUS RT-N13U B1 - discussion пїЅ
Wi-Fi Router: 2.4GHz (300Mbit \ s) | 5 • 100Mbit \ s | USB: x1 (3g, torrent, ftp, print server)


Attached Image

Description
ASUS RT-N13U B1 is equipped with a built-in switch, which allows you to change the mode of operation of the device. The switch has 3 positions. Router mode is used when a user connects to the ISP through Ethernet-cable, if there is already a working wired network, the choice of mode of AP (Access Point) to connect to the network will allow wireless clients, and Repeater mode will expand the coverage of the existing wireless network. The router comes with a new version of the utility Download Master, which is a BitTorrent client that provides a high speed of downloading files and supporting Torrents-resources using a rating.
Additional Images
Attached ImageAttached ImageAttached ImageAttached ImageAttached Image
Specifications
CPU
  • Ralink RT3052 384MHz

Ram
  • 64 Mb

Flash
  • 8 Mb

Standards
  • IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.11d, IEEE802.3, IEEE802.3u, IEEE802.1X, WPA, WMM, IPv4

Wan ports
  • 1 x RJ45 for 10/100 BaseT
  • Support Ethernet and 802.3 with max. bit rate 10/100 Mbps and auto cross-over function (MDI-X)

LAN Ports
  • 4 x RJ45 for 10/100 BaseT
  • Support Ethernet and 802.3 with max. bit rate 10/100 Mbps and auto cross-over function (MDI-X)

USB port
  • 1 x USB 2.0

Reset button
  • Push for above 5 seconds to restore factory settings

EZ Setup button
  • Yes (WPS)

Management
  • Internet connection type: Automatic IP, Static IP, PPPoE (MPPE supported), PPTP, L2TP
  • Dual Link support
  • WAN Bridge support
  • Multicast Proxy support
  • Multicast Rate Setting support

Firewall
  • Firewall:
    • NAT and SPI (Stateful Packet Inspection)
    • enable / disable WAN ping
    • allow access from WAN
    • log of accepted and dropped

  • Filtering:
    • Single Port and Port Range
    • URL based
    • MAC Address

Operating Frequency
  • 2.4Ghz

Modulation
  • 802.11n:
    • BPSK / QPSK / 16QAM / 64QAM

  • 802.11g:
    • ODFM @ 6, 9, 12, 18, 24, 36, 48, 54Mbps

  • 802.11b:
    • DBPSK @ 1Mbps
    • DQPSK @ 2Mbps
    • CCK @ 5.5 / 11Mbps

Data rate
  • 802.11n Draft 2.0: up to 300Mbps
  • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
  • 802.11b: 1, 2, 5.5, 11Mbps

Operation Channel
  • 11 for N.America, 14 Japan, 13 Europe (ETSI)

Antenna
  • 2 x internal antenna
  • Antenna Gain in 3 dBi

Range
  • outdoor (LOS, Light-Of-Sight) 200 m at 802.11n * *

Output power
  • 15.5 ~ 16.5dBm (n mode)
  • 15.5 ~ 16.5dBm (g mode)

Receive Sensitivity (10MHz BW)
  • -74 ~ -75dBm @ 54Mbps
  • -89 ~ -92dBm @ 11Mbps
  • -91 ~ -95dBm @ 1Mbps

Encryption
  • 64/128-bit WEP
  • WPA-PSK, WPA2-PSK,
  • WPA-Enterprise, WPA2-Enterprise, Radius with 802.1x

Authentication
  • MAC address, 802.1x

Power adapter
  • AC Input:
    • 100V ~ 240V (50 ~ 60HZ)

  • DC Output:
    • 12V with max. 1 A current

Products webpage
Firmware
Useful information


There is no curator in the subject. For questions about filling caps, please contactauto RU in QMS or moderators section through a button Pictureunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedDronozoider - 21.03.18, 03:53



Rep: (46)
* luk13, while the firmware is happy, what the speed of the wafer?



Rep: (9)
Hello. Prompt AMPs.
I want to make an open wi-fi with this router, but connect what would show ads. As well as what it can be implemented?



Rep: (0)
* anato671, I have a web 30 / 10Mbps with him cope any router :). Who checked the file transfer within the network. With one nouta on the other, both of WIFI showed ~ 40Mbit. C wired to WIFI ~ 75Mbit. After midnight, the provider removes the restrictions and in theory should be 100/100. I will try to check on the torrent.



Rep: (0)
Hello! Put wive firmware, the router just does not know! Before firmware constantly hung wifi and had to reboot. Now all the rules!
IPTV set up for consoles from Onlaym (Rostelecom), also work. On the drain firmware from Asus failed to set up IPTV.

Post has been editedDen4er12 - 18.12.17, 21:49



Rep: (46)
* luk13, It is not necessary to torrents iroveryat, I myself kruglosutosno 100Mbps for 370rubley. I am interested in the speed of vayfay, and then I have a 93 firmware only 45 Mbps.



Rep: (0)
* anato671, 100 a 370 is good, but in our area for 30 330 sold :(. I checked to download the torrent of 80Mbit WIFI. Speed ​​test WIFI is also 80.
speedtest
Attached Image



Rep: (0)
anato671 @ 18.12.17, 23:35*
I am interested in the speed of vayfay, and then I have a 93 firmware only 45 Mbps.
~ 94 Mbps, the rate of 100, firmware ddwrt.



Rep: (0)
Krc has managed to put my dd-wrt firmware now can not roll back to the sink and tried all ways not achieved results
Maybe someone has already done, and knows how to Izzy. ..
I will be grateful. ...



Rep: (5)
Hello.
Can who knows at the drain insertion can be done sl.shtuku?
Is one of the computers, with their the IP, connected to the router (net of organized data router).
Can I include a schedule for the IP, which used switched on and off Internet on time only for this IP?
It must be the child at night to cut down the 'Net ... ((

Or this operation can be done on the other to ask? Then, on what?

Thank. And all with the come !!!!



Rep: (4)
* Mr.Miller In ddwrt possible
Attached Image



Rep: (5)
redL1nE_87 @ 03.01.18, 02:50*
ddwrt possible

And in the home such a chip can be done?
ddwrt as that set, not on this device, remember that long to understand and there ... just now everything works, no special requests. For the sake of this piece again climb to understand ...



Rep: (0)
Good day!
Can I connect to this router 3G modem ZTE MF730M ??? Firmware should own, in the list of supported modems is not present, but a router determines it.



Rep: (5)
Guys, hands only reached. But I can not swing by askinghttps: //www.dd-wrt.com…upport/other-downloads
The header link does not work. Does anyone have dd-wrt firmware for this device?



Rep: (0)
Ewgeshka @ 08.11.17, 15:12*
Yes, the piece of iron is unkillable. Utility from ASUS firmware restoration raises any brick. Just if you get a brick, there’s no panic.

Yes, and I removed the metal cover on my own where to find the percent with memory and slapped the heatsink from geforce 8400 =)

I copied the instructions with ddwrt, do not kick =)) Somehow I was flashing it.

Asus Firmware Restoration for the 13th
OpenWrt firmware from dir 615, suits us too
Wive_WR-300NU-RT3052-2T2R-USB - for routers Asus N13U-B1
пїЅ#


My Asus RT-N13U B1 does not accept the firmware Wive_WR-300NU-RT3052-2T2R-USB. I am using the proposed tool and 57% loading stops. He writes that error and there is no connection. The instructions to install prescribed 192.168.1.2 address of the computer and the mask 255.255.255.0 A string default gateway is left blank, or what?



Rep: (3)
Oleg4200 @ 27/02/18, 13:52*
My Asus RT-N13U B1 does not accept the firmware Wive_WR-300NU-RT3052-2T2R-USB. I am using the proposed tool and 57% loading stops. He writes that error and there is no connection. The instructions to install prescribed 192.168.1.2 address of the computer and the mask 255.255.255.0 A string default gateway is left blank, or what?

Most likely you have previously filled in router firmware size of 4MB. You need to sew up the image of the transition to recover the flash memory size of up to 8MB.
http://forum.ixbt.com/...gi?id=14:58466:453#453
very imagehttp://yadi.sk/d/pdblyl493x0GW
Unpack from zip, flash through the Firmware Restoration. Next, you can sew Wive_WR-300NU-RT3052-2T2R-USB directly from the Web interface wive.



Rep: (3)
I rebuilt the original Wive-NG-RTNL under RT-N13U B1 from sources.
Changes:
1 The Power LED indicator has been corrected, now it always shines (In the original Wive, the indicator is "dead" after loading the router).
2 Corrected default settings, when reset to Default
2.1 WAN port is installed correctly (In the original Wive, jumped to LAN4)
2.2 Login and password: admin admin as in ASUS (In the original Wive was Admin Admin - with a capital letter)
2.3 UPNP Enabled (Original Wive Off By Default)
2.4 Nat FCone (In the original Wive Linux default nat), which, together with UPNP, gives us automatic port forwarding for torrent and online games
3 FoE Size: 16384 (In the original Wive, the default is FoE Size: 4096). HW_NAT hardware handles 16384 connections.
Link to firmware:https://yadi.sk/d/diuKRTY93SquKr

Post has been editedBolenb - 28.02.18, 07:30



Rep: (46)
* BolenB, When will fill themselves, share impressions.



Rep: (3)
anato671 @ 28.02.18, 13:32*
BolenB, When will fill ourselves, share impressions.

Well, if compiled from source, meaning filled and checked on me.
Usual Wive-NG-RTNL.
On IpoE and PPPoE protocols through hardware nat speed 100Megabit / s torrent-c ah about zero CPU load.
Stable, no hangs, the router can not restart the years.

Diff s changes are here:https://yadi.sk/d/LuyrZXjX3Srm56
Who is able to collect firmware can apply a patch and collect yourself.
Sami firmware source are here:
git clone git: //git.code.sf.net/p/wive-ng/wive-ng-rtnl wive-ng-wive-ng-rtnl



Rep: (12)
Mr.Miller @ 24.02.18, 20:34*
Guys, hands only reached. But I can not swing by askinghttps: //www.dd-wrt.com…upport/other-downloads
The header link does not work. Does anyone have dd-wrt firmware for this device?


Here's a link for you:https: //download1.dd-w.../downloads/betas/2018/
I stably 34929



Rep: (46)
* BolenB, How then revert to the drain, if your not to like? And what speed vayfay, and that the drain in my forty kopecks.


Full version    

Help     rules

Time is now: 10/01/19, 1:23