Attention!
Pictures are removed under the spoiler.
How to remove the image under the spoiler in the official client of the site
How to remove images under the spoiler from the PC

Post has been editedkerbala - 02.03.19, 18:54

Yeah ... Did ... :)

Big fred Well, yes, everything will be in one place here :)
Orderedsuch a vacuum cleanerwe'll see..

Post has been editedkerbala - 04.08.17, 23:18

So, while the best result, in the economy class - the radiator from the old motherboard,
cooler 40x40x10, cover off, the device is hidden behind the TV, voila ...
Ali-Ready Solution, also has the right to life.
But, I was faced with the fact that the 12V cooler from 5V starts up through time. I ordered from the Chinasconvertersuntil I wait ...

Posted 08/04/2017 23:21:


My appearance does not warp, I have a PC-wk rashristanny worth,
so that consoles, I have two, undress and hide behind the telly ...)

I propose to put a waterblock or freonku on the chip ..: D
People, why?
Chips work fine up to 90s.
Who is heated above?

I took myself likethisandcoverto him, the backlight had to be abandoned, it protrudes 3mm higher, on the stock radiator without gum (on paste) 4 self-tapping screws perfectly hooked it. I powered it on the board, soldered to USB. I punched a button, neat, red and put it in the gap to the power supply from the unit. I am satisfied!

Post has been editedSAMDE - 04.08.17, 23:27

me in principle, too, just setting there is easier, and as an experiment.

Posted 08/04/2017 23:27:


Yes! It comes to 95 ..

Too much, you need to deal with it !!!

I agree, so I'm looking for something better ..

Can I have a photo, how was it?

Post has been editedkerbala - 04.08.17, 23:54

A person also lives at a temperature of 42c ... but not for long ...
Sorry, but change the temperature mode of the chip, for about 50 r,
This is not a perversion, but taking care of the device.

Famously..
Just planning to buy this set-top box, and the heat is looking at a painful topic for her.
Of course, my hands are straight, I can do any radiators in bulk from old motherboards and even with coolers.
What is the situation with heating at x98pro?
Is there better cooling due to the hull?

Post has been editedKlez777 - 04.08.17, 23:34

but it is decided ..

I have such a beauty on one console.
It is necessary to disassemble, drill out the body, for circulation ... While laziness ...

Big fred also took this type

but for now I think about the vacuum cleaner: D

It looks like a cooler with a vidyahi, and their center axis - 55, alas, and not sawing ice.
I have one from the motherboard, with a mount, now I’m waiting for 40x40, just on the heatsink,
perfectionism poboku ...)

When I found the phrase I wrote: "In general, the fight with temperature reminds me of anorexia: it seems that there is already a little, but I always want less ...": D

Drill ... like legs allow.
And anyway, with the lid closed, even with additionally drilled
heat transfer holes worse.
Here I will wait for coolers and converters, finally finish everything,
pictures lay out.

This is true by heating with a drain, but there was not even one cement, who would say that his prefix died of heat).
I don’t mind cooling, and of course I myself slightly modified the cooling console, but the fact about the reliability of the chip remains a fact.

I looked at your future vacuum cleaner, immediately thinking it came - you can put it inside, and if you change the polarity, it will no longer be a vacuum cleaner, but a cooler will blow a radiator and blow air out of the console if you correctly place it and have ventilation holes next to it, for example, left body parts.

I plan to make a hole for connecting a vacuum cleaner. And so, as we come to see live what it is ...