Xiaomi Mi Router 3G - discussion | Wi-Fi Router



Rep: (1185)
Xiaomi Mi WiFi Router 3G - discussion »
Wi-Fi Router

Attached Image


Description
This device is an improved modification.Xiaomi Mi WiFi Router 3. In appearance, there are no differences, except for the weight of the device, since the novelty received a built-in aluminum radiator.
The router fitted with a dual core processor MT7621A with a frequency of 880 MHz, 256 MB RAM DDR3-1200MGts and 128 MB flash memory. The device simultaneously in two bands: the 2.4 GHz band (up to 300 Mbit / s mimo 2x2 40MHz) and 5 GHz (up to 867 Mbit / s mimo 2x2 80MHz).
From the ports on the device one USB 3.0 port, two LAN ports (1 Gb / s) and one WAN port (1 Gb / s). The difference between Mi Router 3 and 3G in featuresofficial website.
Additional Images
Attached Image
Attached Image

Specifications
Official site
  • CPU: MT7621A 880 MHz
  • ROM: 128 MB SLC Nand Flash
  • RAM: 256MB DDR3-1200
  • USB 3.0 (5V / 1A)
  • 2.4 Ghz WiFi 2x2 (up to 300 Mbps)
  • 5 Ghz WiFi 2x2 (up to 866 Mbit / s)
  • WAN up to 1 Gbps
  • LANx2 up to 1 Gbit / s
  • Power supply 12V / 1.5A Plug: 5.5x2.1 mm
Instructions and useful information
All actions performed with the router you do at your own peril and risk. When using custom firmwares, it is useful to have a USB-UART TTL 3.3v adapter

When installing firmware via Breed, pay attention to the choice of section and additional steps in the instructions.
Currently, the memory markup for unification has two cores (0x200000 and 0x600000).
From the first work: runoff, build OpenWRT frommogvai, PandoraBox and AsusWRT.
From the second: stock, original OpenWRT and Padavan.
Ignoring the correct choice of the kernel leads to the inability to start the firmware, problems in the work and failure of the update through the web interface.


Full team instruction for flashing from scratch


General instructions and information Stock Breed Padavan Pandorabox Openwrt Gargoyle
Firmware
Custom firmware and bootloaders
Modernization
The authors of the instructions are not responsible for the failure of your device. All manipulations are done only at your own peril and risk, and with understanding why this is necessary!

Applications
Applications miwifi and mirouter are designed and work only with stock firmware!
PictureXiaomi MiWiFi
PictureXiaomi MiRouter
PicturePadarouter -An application to work with iOS Padavan. Versionfromback37 and one more version from Sotik ;
Xiaomi family of routers onsavagemessiahzine.com
Previous polls
Attached Image
Attached Image

Picture
If you are here for the first time or want to ask a question, first look below

Mini FAQ on the topic. Novice Questions

"Version" R3GV2 - is not more than mi4Agigabit with another label. Differences clearly. Carefully read the description and picture before the purchase. All discussions device profile topic

Are there differences between "international / European" and "Chinese" versions of xiaomi routers
The difference is only in the plug of the power adapter and the pre-installed firmware, there are no other differences
I bought a router. Should I change the firmware?
Not worth it yet. Read the cap and topic, assess your needs and capabilities, the answer will become more obvious to you.
How to bind a router to your xiaomi account?
  • At initial setting, the plugin-locator should bedisabled .
  • You must be registeredxiaomi accountand installed an application forandroid, iosorwindows
  • The router must have access to the Internet (for example, wan xiaomi is connected to the lan of another working router)
  • The device from which the binding is made must be connectedonly to xiaomi router network.

    In some cases, it is necessary to make a full reset with the reset button or try binding from different devices (phones, tablets, computers). All the above conditions must be fully met.
What is the difference between firmware, which one to choose?
Stock
  • The router comes with a "stock" firmware. There were no firmware with English for this router, no, and, practically guaranteed, it will not, but there is no fundamental difference between the "English" and "Chinese" versions, except for the presence of English in the first and more frequent updates of the second. Versions for developers also do not carry significant differences from the usual except for access via SSH.
  • The firmware is based on OpenWRT, but has very limited functionality, so if you need IPTV, a media server on the router, ipv6, bypass blocking, advanced network settings, connecting usb modems and printers, full torrent clients and other amenities, look in the direction of alternative firmware.
  • The miwifi app and the rest of the xiaomi ecosystem only work with stock firmware.
Padavan
  • Stable, high-quality and smart firmware, covering almost all possible needs of the ordinary and advanced user, having an interface in Russian.
  • It features convenient and clear settings.
  • There is support for multicast IPTV (Rostelecom, Beeline and any others), ipv6, hdd connection (including several), dlna media server, work with usb modems, printers, other usb devices, bypassing locks, downloading torrents, scheduler, launching custom scripts, installing additional packages from Entware and more.
  • Of the minuses, the difficulty of self-assembly.
  • It is possible to download the finished firmware
Openwrt
  • Known fresh kernel firmware from an international development team. Covers all possible standard and non-standard needs, incl. advanced users.
  • There is support for multicast IPTV (Rostelecom, Beeline and any others), ipv6, hdd connection (including several), dlna media server, work with usb modems, printers, other usb devices, bypassing locks, downloading torrents, scheduler, launching custom scripts, installing additional packages.
  • From minuses - the complexity of self-installation of the packages and settings. Sometimes behaves not stable.
  • There is an opportunity to download ready assemblies from updated posts in this topic.
The router cuts speed, problems with range and stability, what to do?
The first step is to understand the reason:
  • If problems are observed whenwired connecting:
    - Check the speed by connecting the provider cable directly, bypassing the router.
    -Check the number of wires in the cable and the quality of crimping of the connectors, in case of doubt, check on the other cable / replace the connector.

  • If problems withwirelessly connecting:
    - Check the settings set in the router and clients: region, range and width of channels, version of the communication protocol, support on the end device (relevant for 5 GHz).
    - Analyze the broadcast and select the least loaded channel.
    - Check the speed whenever possible on multiple devices.
    RWhen the air is loaded, far away from the router, there is interference from other devices (microwave oven, bluetooth device, etc.), the speed will always bemuch Below the maximum possible, these are the laws of physics and the principle of wifi.
    The range of action and penetrating ability of a 5GHz signal is noticeably lower than 2.4, this is a feature of the technology, and not a problem with your device.
    -In rare cases, it makes sense to check the reliability of the contacts of the antennas and the radiator on the router board by disassembling the device case.
    SpeedTest and similar online services are not reliable indicators of speed. The real speed can be found either with the help of iperf or a test download torrent with a large number of distributors. Mobile devices due to limited computing resources and, in some cases, rigid fixation of a narrow channel are also not always able to display real results.

Should I connect the 2.4 and 5 GHz networks into one and how to do it?
On the stock firmware there is a separate switch in the settings, for any others it is enough to set the same network names and passwords.
However, there is no full-fledged algorithm for working with interconnected networks on any firmware, so the client will choose the connection point himself, and there are no guarantees of the adequacy of this choice:
in the overwhelming majority of cases, the 5 GHz network will be connected to the last even with a weak signal if it is initially selected by the client, and, conversely, the client is unlikely to switch from 2.4 to 5 if it is already connected to it.
thereforeit is strongly recommended to abandon this feature and use separate networks
What is the Breed loader? Do I need it?
The bootloader in a router is similar to bios / uefi for a computer or recovery for a phone: it is he who is responsible for the low-level initialization, repair and download of the main firmware.
If you plan to use only stock firmware, you will hardly be useful, but installing third-party firmware will be your guarantee of security, ease of migration and updates. Therefore,highly recommended before any manipulation of the firmware install Breed: it is primarily in your interest.
  • The stock downloader has the ability to recover only via usb flash with the original firmware image.
  • The bootloaders built into Padavan and OpenWRT allow you to connect using an usb-ttl uart adapter and restore from the command line.
  • The Breed loader allows you to connect over a normal twisted pair, has a graphical interface (including in Russian when using the plug-in), ample opportunities to configure, change system settings, firmware and create backup copies.
I want to connect a modem / printer / ... to the hdd / usb router, will it work?
On the stock firmware, only drives will work, everything else is only on Padavan and OpenWRT.
  • All common file systems, disks are supported.any volume.
  • With a 99% percent chance, your usb modem will also start up without any manipulations, but using and setting up is much more convenient in the "hilink" mode, look for details in the profile topic of your device.
  • Printers will work in one way or another. There is no WPS on the Padavan firmware, use the manual configuration of the network for the printer using the manufacturer’s utilities on the computer.
Can I connect multiple devices to the router via usb?
Yes, there is such an opportunity. Be it several identical or different devices: hdd, flash drives, modems, printers, etc., get along well together.
Only restriction : devices should have enough power. therefore highly recommended Use a quality usb hub with your own power.
How to upgrade firmware? (any)
Two absolutely universal ways that work on all firmware:
  • Through the regular update menu in the web interface and the file with the new firmware.
  • Through the Breed loader with installing the firmware in the desired section in accordance with the instructions.
Nuances of updating builds and versions of OpenWRT, setting autoboot flags to breed and otherspecify in the instructions on which you originally installed the firmware
The router is unavailable, the front diode is off.
First check the power adapter, it should have 12 volts at the output under load.
Connect to the router via LAN and check the resulting IP address:
-169.254.С….С… - automatic windows range (the router did not issue IP),
-192.168.С….С… - received from the router, try to access its web interface.

If the adapter is OK, but the front diode is off, there is no wifi broadcast, no LAN access: the area of ​​the NAND memory loader is corrupted, and the option is only 2:
-Vypivanie memory chip and firmware on the programmer (easier in terms of service, because programmers cost from $ 100-150)
-Transition to NOR (SPI) memory(costs in the range of $ 5)
After switching to SPI, there is also the possibilityrestore native NAND memory
The wrong partition was selected when flashing through Breed, what should I do?
It is enough just to go into the breed again, write the firmware according to the instructions in the desired section and, if necessary, specify the boot section by adding the autoboot rule, again in accordance with the instructions. No other action is required.
How to return / update the firmware if the drain is installed Breed
To do this, go to Breed bootloader firmware to flash the drain in both sections and remove autoboot rules, if any.
What are the differences between the Mi-3, Mi-3G and Mi-4 routers, which one is better to choose?
On the basis of technical characteristics and capabilities, the 3G router will be the clear winner.
Attached Image

Model Comparison Chart routers Xiaomi
Attached Image

  • Purchase, lifehacks at purchase, coupons are discussed in the topicClub lovers overseas shoppingandPurchase Xiaomi devices
  • Questions and answers on the assembly, configuration, and all not specific to this particular model of the router nuances on the firmware Padavan should look inprofile topic
  • Forall common not attached to this router questions on Openwrt take a look atthis topic
  • With questions on choice and comparison, welcomehere


If you could not find the answer to your question in the header, first use the search on the topic.

Picture



For upgrading and filling caps:QMS curatoralways open


Post has been editedM | A | G - 15.02.20, 20:29
Reason for editing: + family



Rep: (12)
Hello, tell in this build (Build OpenWRT v18.06.0 with additional packages), you can configure l2tp protocol? You ate it can tyknete the instruction.



Rep: (0)
Updated assembly.
[...]
PS On this I’m leaving for creative binge .... banally tired ...


How to update your assembly (from movgai) to release OpenWRT 18.06.1 or openwrt trunk?



Rep: (17)
Comrades, sews openwrt by breed (SW instruction. Mogvai) waited for about 2 hours and missing light, try to turn in to the breed through the clamping reset flashes purple, and then all the time the blue LED flashes when through breed enter, it also does not go. Connect the router to the PC pokazivaet, but no internet. If you reload the router, the LED lights up blue.



Rep: (25)
* Game Tascher, and then wait for the 2:00?



Rep: (17)
* vitbomba
Tell us how you are pierced, and which version?



Rep: (25)
* Game Tascher, that is, Brides or OpenVrt?



Rep: (25)
* Game Tascher, the first section through the Breede



Rep: (17)
Openwrt flashed in the first section, waited 7 minutes, it does not go. What the heck? (



Rep: (25)
* Game Tascher, come on http://192.168.1.1

Post has been editedvitbomba - 23.09.18, 22:10



Rep: (17)
Tortured, tormented, yet he returned to the stock. Tomorrow I will try again, can someone tell me know. All the same, tomorrow is another day,



Rep: (25)
* Game Tascher, sewn as usual and always worked. It is strange that the drain works and OpenVrt not. An hour is not your Chrome browser?



Rep: (17)
* vitbomba
Microsoft edge, internet explorer, opera through them tried to flash.
Only chrome sink set up.
Well, do not throw off screens all of its tabs to breed (in qms), if you please, I do not insist.

Post has been editedGame Tascher - 23.09.18, 23:03



Rep: (185)
Good morning!
Comrades, I have a question to the account backup on the UART.
So, focusing on commentsXiaomi Mi Router 3G - discussion (Post tolikvl # 64292282), Entered commands
setenv uart_en 1
saveenv
reset

and the router is rebooted, picked up a stick and stuck ... - and where in fact enter the commando
cat / proc / mtd

Here is a screen past the log line:
Attached Image

It must press "Enter" eh press (???), so there was something string type
root @ XiaoQiang: ~ #

Or something like this:
MT7621 #



Rep: (180)
HRistose @ 24.09.18, 02:40*
Comrades, I have a question to the account backup on the UART.

HRistose @ 24.09.18, 02:40*
It must press "Enter" eh press


Good morning. That's right - press Enter, the command prompt. Backups can only mtd4 (Factory), but it IMHO.
In general, convenient zabekapit one line (sda1 - your usb disk):
for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13; do dd if = / dev / mtd $ i of = / extdisks / sda1 / mtd $ i.bin; done

And at once I am without registration and other things on the example Padavan'a firmware (again IMHO, I just so convenient).
Split MI-R3G_3.4.3.9-099.trx 4MB and at rest. 4MB sew in "kernel1", the rest sew "rootfs0":
mtd write /extdisks/sda1/kernel1.bin kernel1
mtd write /extdisks/sda1/rootfs0.bin rootfs0
nvram set flag_last_success = 1
nvram commit
reboot

This stock if the loader will be used, and if not allergic to Breed, it is better to sew, and from it has everything else. Again Breed can be sewn later already of alternative firmware.



Rep: (13)
Tell me please. Padawan collected on instructions from Rodstvennik63 in Windows10 Ubuntu 18.04. In the process of inclusion in the config I chose dnscrypt-proxy in the assembly. As this dnscrypt-proxy is now included? Or options other than to connect a repository with advanced USB flash drive and then install dnscrypt-proxy2 not?



Rep: (238)
* Eros,
This service DNSCrypt proxy is on the page "Administrative Tools" - "Services"
Attached Image

And at the expense Entware installation on a flash drive, why? There is the internal memory of the router, which is not used. On it and set Entware. - to cap everything.Installing Entware on the internal flash memory in the free section "RWFS"



Rep: (17)
Which item to edit in the breed to restore seriynika? Who can look set breed name config?



Rep: (12)
Entware tried to install to the internal flash
from this post
Xiaomi Mi Router 3G - discussion (Post LESHIY_ODESSA # 73055482)
everything was got.
Install the package collectd-mod-thermal
from here.
http: //pkg.entware.net...l_5.8.0-1_mipselsf.ipk
but something went wrong and the temperature nor any I saw.
can somebody from guru describe method of outputting temperature?
may have a way to control mene gemoroyny
proca temperature memory?
other routers even have tabs temperature monitoring
this is holy to know the temperature of your iron and everything is forgotten.



Rep: (503)
vladtkach20000 @ 24.09.18, 15:17*
other routers even have tabs temperature monitoring

and you are sure that the board has a temperature sensor?

Post has been editedyadoff - 24.09.18, 15:21



Rep: (12)
* yadoff the concept can not,
it seemed to me that every cent is equipped with a sensor


Full version    

Help     rules

Time is now: 18/02/20 14:00