PuTTY to help. Login and password from SSH are the same as from web muzzle.


It is high time. I have a switch out today, most likely because of this.
She is still very experimental.

Post has been editedDart raiden - 15.03.19, 18:48

The question is so many complain about the small radius of transmission over a wireless network, is it somehow solved or not?

Best of all, this is solved by purchasing several access points to cover the necessary territory.

Post has been editedDart raiden - 15.03.19, 19:09

There is a problem in the discussion of the people and exactly the opposite - when turned on - no.
So, I think, will not be demolished. But what patch is understandable.

Shl. It seems that it is necessary to throw from the branch 18.06 to the master. At 18.06 even this item did not enter the kernel config, which is necessary for the patch.

Alas, if the frame size is 64/128/512/1280, and the number of threads is 5/10/25? Without claiming to rfc 2544, of course, just load the piece of hardware with traffic to see its actual performance.

Dart raiden , drive in the address 192.168.1.1 and 31.1, does not work. Maybe I'm doing something wrong. Now there is a padawan firmware

wvoland
Normal radius is not worse than others. I compare with tplink 1043ndV2 and a couple of different weaker ones in a treshka.
For normal reception, place in the center of the apartment so that there is a minimum of walls to different points of the apartment and there will be happiness, finish with miwifi 3g rotoers placed at different ends of the apartment and connected to each other with cable as access points.
Do not use an external screw without external power supply and do not use it in USB3 mode if you need 2.4GHz wifi, or have the hard drive as far as possible and preferably around the corner from the router ;-).

Post has been editedalex-1900 - 15.03.19, 20:17

I also think about it sometimes, I want to touch WPA3, whose support in the master branch is already there.

Posted 03/15/2019 at 20:17:


First you need to enable SSH in the settings, right?
Advanced Settings в†’ Administration в†’ Services в†’ Enable SSH Server: Yes

Post has been editedDart raiden - 15.03.19, 20:17

Can anyone share Padavan firmware with QoS support or give a link?

did thisinstructions

but when executing the script produces the following:


/ home / root # /etc/storage/shaper.sh
/etc/storage/shaper.sh: line 11: tc: not found
/etc/storage/shaper.sh: line 14: tc: not found
/etc/storage/shaper.sh: line 17: tc: not found
/etc/storage/shaper.sh: line 18: tc: not found
/etc/storage/shaper.sh: line 19: tc: not found
/etc/storage/shaper.sh: line 20: tc: not found
/etc/storage/shaper.sh: line 21: tc: not found

Firmware MI-R3G_3.4.3.9L-100.zip from Rodstvennik63 In the description it is written that the QOS modules are disabled, but in the description they seem to be included:

### Include network QoS scheduling modules. ~ 0.2MB
# CONFIG_FIRMWARE_INCLUDE_QOS = y

### Include IMQ module for shapers (a bit of performance degradation). ~ 0.02MB
# CONFIG_FIRMWARE_INCLUDE_IMQ = y

### Include IFB module for shapers. ~ 0.03MB

or
#CONFIG_FIRMWARE_INCLUDE_IFB = y means that this line is skipped for processing?

You need to write the following:


Yes. To be simpler, this is called commenting a line.

Post has been editedNitrooxid - 15.03.19, 20:50

Sharovik
Perfectly going on Windows 10 on the built-in ubuntu, no virtual machines are needed.
mitnick
I can say that Xiaomi has no competitors in this price range.
Compared in terms of range and stability with the actual old man asus rt-n56u (I don’t remember how old it is), tp-link of all stripes, linksys, netgear, dlink and so on.

Post has been editedtaxion - 15.03.19, 21:41

People, please tell me why the router does not download the torrent in the MiWFi application, puts it on the download, but the download does not go. What in the settings you need to podshamanit?

I purchased this router, I did not flash it, I decided to connect it via miwifi.com for the time being. It did not work, I called my operator TTK, they have IPoE protocol, there is no such choice in the list. Actually the question, or I looked through where you can configure via IPoE or just have to flash?

Art_tai
IPoE at the provider is a dynamic IP at the router, because The provider seeing the mac of the router automatically issues an IP.Example.
Mac router provider registered or you have cloned mac on router from previous hardware?

assembled Padavan firmware with QoS, suddenly someone will come in handy, QoS configured byinstructions, CPU load 11-15% when running speedtest on the channel 50 Mbit


MI-R3G_3.4.3.9L-100-witch_QoS.rar(11.9 MB)

Sharovik
For one stream is great, and if the torrent in ~ 500 connections or 10+ devices?

Post has been editedtaxion - 16.03.19, 09:33

I myself did not clone the address, I will not say for the operator, but if there is no connection, then I think it is unlikely. Is it necessary for me to call the operator and register the mas of the new router? And what protocol to choose in the list, there is DHCP (it was by default), PPPoE, Static IP?

Art_tai
DHCP.

Posted on 03/16/2019 09:52 AM:

sivukhin
http on httpS hands correct in the address bar?

We all have different tasks, for a more stable operation of the TV, the set-top box is suitable for me (so that there are no gaps when someone else uses the Internet)

Hello everyone, all the indicator shines through the upper part of the body?