Xiaomi Mi Router 3G - discussion | Wi-Fi Router



Rep: (1185)
Xiaomi Mi WiFi Router 3G - discussion »
Wi-Fi Router

Attached Image


Description
This device is an improved modification.Xiaomi Mi WiFi Router 3. In appearance, there are no differences, except for the weight of the device, since the novelty received a built-in aluminum radiator.
The router fitted with a dual core processor MT7621A with a frequency of 880 MHz, 256 MB RAM DDR3-1200MGts and 128 MB flash memory. The device simultaneously in two bands: the 2.4 GHz band (up to 300 Mbit / s mimo 2x2 40MHz) and 5 GHz (up to 867 Mbit / s mimo 2x2 80MHz).
From the ports on the device one USB 3.0 port, two LAN ports (1 Gb / s) and one WAN port (1 Gb / s). The difference between Mi Router 3 and 3G in featuresofficial website.
Additional Images
Attached Image
Attached Image

Specifications
Official site
  • CPU: MT7621A 880 MHz
  • ROM: 128 MB SLC Nand Flash
  • RAM: 256MB DDR3-1200
  • USB 3.0 (5V / 1A)
  • 2.4 Ghz WiFi 2x2 (up to 300 Mbps)
  • 5 Ghz WiFi 2x2 (up to 866 Mbit / s)
  • WAN up to 1 Gbps
  • LANx2 up to 1 Gbit / s
  • Power supply 12V / 1.5A Plug: 5.5x2.1 mm
Instructions and useful information
All actions performed with the router you do at your own peril and risk. When using custom firmwares, it is useful to have a USB-UART TTL 3.3v adapter

When installing firmware via Breed, pay attention to the choice of section and additional steps in the instructions.
Currently, the memory markup for unification has two cores (0x200000 and 0x600000).
From the first work: runoff, build OpenWRT frommogvai, PandoraBox and AsusWRT.
From the second: stock, original OpenWRT and Padavan.
Ignoring the correct choice of the kernel leads to the inability to start the firmware, problems in the work and failure of the update through the web interface.


Full team instruction for flashing from scratch


General instructions and information Stock Breed Padavan Pandorabox Openwrt Gargoyle
Firmware
Custom firmware and bootloaders
Modernization
The authors of the instructions are not responsible for the failure of your device. All manipulations are done only at your own peril and risk, and with understanding why this is necessary!

Applications
Applications miwifi and mirouter are designed and work only with stock firmware!
PictureXiaomi MiWiFi
PictureXiaomi MiRouter
PicturePadarouter -An application to work with iOS Padavan. Versionfromback37 and one more version from Sotik ;
Xiaomi family of routers onsavagemessiahzine.com
Previous polls
Attached Image
Attached Image

Picture
If you are here for the first time or want to ask a question, first look below

Mini FAQ on the topic. Novice Questions

"Version" R3GV2 - is not more than mi4Agigabit with another label. Differences clearly. Carefully read the description and picture before the purchase. All discussions device profile topic

Are there differences between "international / European" and "Chinese" versions of xiaomi routers
The difference is only in the plug of the power adapter and the pre-installed firmware, there are no other differences
I bought a router. Should I change the firmware?
Not worth it yet. Read the cap and topic, assess your needs and capabilities, the answer will become more obvious to you.
How to bind a router to your xiaomi account?
  • At initial setting, the plugin-locator should bedisabled .
  • You must be registeredxiaomi accountand installed an application forandroid, iosorwindows
  • The router must have access to the Internet (for example, wan xiaomi is connected to the lan of another working router)
  • The device from which the binding is made must be connectedonly to xiaomi router network.

    In some cases, it is necessary to make a full reset with the reset button or try binding from different devices (phones, tablets, computers). All the above conditions must be fully met.
What is the difference between firmware, which one to choose?
Stock
  • The router comes with a "stock" firmware. There were no firmware with English for this router, no, and, practically guaranteed, it will not, but there is no fundamental difference between the "English" and "Chinese" versions, except for the presence of English in the first and more frequent updates of the second. Versions for developers also do not carry significant differences from the usual except for access via SSH.
  • The firmware is based on OpenWRT, but has very limited functionality, so if you need IPTV, a media server on the router, ipv6, bypass blocking, advanced network settings, connecting usb modems and printers, full torrent clients and other amenities, look in the direction of alternative firmware.
  • The miwifi app and the rest of the xiaomi ecosystem only work with stock firmware.
Padavan
  • Stable, high-quality and smart firmware, covering almost all possible needs of the ordinary and advanced user, having an interface in Russian.
  • It features convenient and clear settings.
  • There is support for multicast IPTV (Rostelecom, Beeline and any others), ipv6, hdd connection (including several), dlna media server, work with usb modems, printers, other usb devices, bypassing locks, downloading torrents, scheduler, launching custom scripts, installing additional packages from Entware and more.
  • Of the minuses, the difficulty of self-assembly.
  • It is possible to download the finished firmware
Openwrt
  • Known fresh kernel firmware from an international development team. Covers all possible standard and non-standard needs, incl. advanced users.
  • There is support for multicast IPTV (Rostelecom, Beeline and any others), ipv6, hdd connection (including several), dlna media server, work with usb modems, printers, other usb devices, bypassing locks, downloading torrents, scheduler, launching custom scripts, installing additional packages.
  • From minuses - the complexity of self-installation of the packages and settings. Sometimes behaves not stable.
  • There is an opportunity to download ready assemblies from updated posts in this topic.
The router cuts speed, problems with range and stability, what to do?
The first step is to understand the reason:
  • If problems are observed whenwired connecting:
    - Check the speed by connecting the provider cable directly, bypassing the router.
    -Check the number of wires in the cable and the quality of crimping of the connectors, in case of doubt, check on the other cable / replace the connector.

  • If problems withwirelessly connecting:
    - Check the settings set in the router and clients: region, range and width of channels, version of the communication protocol, support on the end device (relevant for 5 GHz).
    - Analyze the broadcast and select the least loaded channel.
    - Check the speed whenever possible on multiple devices.
    RWhen the air is loaded, far away from the router, there is interference from other devices (microwave oven, bluetooth device, etc.), the speed will always bemuch Below the maximum possible, these are the laws of physics and the principle of wifi.
    The range of action and penetrating ability of a 5GHz signal is noticeably lower than 2.4, this is a feature of the technology, and not a problem with your device.
    -In rare cases, it makes sense to check the reliability of the contacts of the antennas and the radiator on the router board by disassembling the device case.
    SpeedTest and similar online services are not reliable indicators of speed. The real speed can be found either with the help of iperf or a test download torrent with a large number of distributors. Mobile devices due to limited computing resources and, in some cases, rigid fixation of a narrow channel are also not always able to display real results.

Should I connect the 2.4 and 5 GHz networks into one and how to do it?
On the stock firmware there is a separate switch in the settings, for any others it is enough to set the same network names and passwords.
However, there is no full-fledged algorithm for working with interconnected networks on any firmware, so the client will choose the connection point himself, and there are no guarantees of the adequacy of this choice:
in the overwhelming majority of cases, the 5 GHz network will be connected to the last even with a weak signal if it is initially selected by the client, and, conversely, the client is unlikely to switch from 2.4 to 5 if it is already connected to it.
thereforeit is strongly recommended to abandon this feature and use separate networks
What is the Breed loader? Do I need it?
The bootloader in a router is similar to bios / uefi for a computer or recovery for a phone: it is he who is responsible for the low-level initialization, repair and download of the main firmware.
If you plan to use only stock firmware, you will hardly be useful, but installing third-party firmware will be your guarantee of security, ease of migration and updates. Therefore,highly recommended before any manipulation of the firmware install Breed: it is primarily in your interest.
  • The stock downloader has the ability to recover only via usb flash with the original firmware image.
  • The bootloaders built into Padavan and OpenWRT allow you to connect using an usb-ttl uart adapter and restore from the command line.
  • The Breed loader allows you to connect over a normal twisted pair, has a graphical interface (including in Russian when using the plug-in), ample opportunities to configure, change system settings, firmware and create backup copies.
I want to connect a modem / printer / ... to the hdd / usb router, will it work?
On the stock firmware, only drives will work, everything else is only on Padavan and OpenWRT.
  • All common file systems, disks are supported.any volume.
  • With a 99% percent chance, your usb modem will also start up without any manipulations, but using and setting up is much more convenient in the "hilink" mode, look for details in the profile topic of your device.
  • Printers will work in one way or another. There is no WPS on the Padavan firmware, use the manual configuration of the network for the printer using the manufacturer’s utilities on the computer.
Can I connect multiple devices to the router via usb?
Yes, there is such an opportunity. Be it several identical or different devices: hdd, flash drives, modems, printers, etc., get along well together.
Only restriction : devices should have enough power. therefore highly recommended Use a quality usb hub with your own power.
How to upgrade firmware? (any)
Two absolutely universal ways that work on all firmware:
  • Through the regular update menu in the web interface and the file with the new firmware.
  • Through the Breed loader with installing the firmware in the desired section in accordance with the instructions.
Nuances of updating builds and versions of OpenWRT, setting autoboot flags to breed and otherspecify in the instructions on which you originally installed the firmware
The router is unavailable, the front diode is off.
First check the power adapter, it should have 12 volts at the output under load.
Connect to the router via LAN and check the resulting IP address:
-169.254.С….С… - automatic windows range (the router did not issue IP),
-192.168.С….С… - received from the router, try to access its web interface.

If the adapter is OK, but the front diode is off, there is no wifi broadcast, no LAN access: the area of ​​the NAND memory loader is corrupted, and the option is only 2:
-Vypivanie memory chip and firmware on the programmer (easier in terms of service, because programmers cost from $ 100-150)
-Transition to NOR (SPI) memory(costs in the range of $ 5)
After switching to SPI, there is also the possibilityrestore native NAND memory
The wrong partition was selected when flashing through Breed, what should I do?
It is enough just to go into the breed again, write the firmware according to the instructions in the desired section and, if necessary, specify the boot section by adding the autoboot rule, again in accordance with the instructions. No other action is required.
How to return / update the firmware if the drain is installed Breed
To do this, go to Breed bootloader firmware to flash the drain in both sections and remove autoboot rules, if any.
What are the differences between the Mi-3, Mi-3G and Mi-4 routers, which one is better to choose?
On the basis of technical characteristics and capabilities, the 3G router will be the clear winner.
Attached Image

Model Comparison Chart routers Xiaomi
Attached Image

  • Purchase, lifehacks at purchase, coupons are discussed in the topicClub lovers overseas shoppingandPurchase Xiaomi devices
  • Questions and answers on the assembly, configuration, and all not specific to this particular model of the router nuances on the firmware Padavan should look inprofile topic
  • Forall common not attached to this router questions on Openwrt take a look atthis topic
  • With questions on choice and comparison, welcomehere


If you could not find the answer to your question in the header, first use the search on the topic.

Picture



For upgrading and filling caps:QMS curatoralways open


Post has been editedM | A | G - 15.02.20, 20:29
Reason for editing: + family



Rep: (0)
* pitunzzz , How much do you advise to put off time? In my portable screws are not designed for continuous operation. Or I'm wrong ?
    1. Attached Image
      Attached Image



Rep: (0)
* kivikprk ,
In my wd passport. There usually 2'5 "inside koi in many new laptop stand I have set maximum -. 4:00.



Rep: (238)
* kivikprk,
Yes, put it on their discretion! This option does not disable the CDM, and just park the head, and even then, not all CDM. There is still dependent on the hard disk controller: one that does not know how others manage this setting yourself.

Post has been editedRodstvennik63 - 13.03.19, 21:12



Rep: (14)
* M | A | G And can be at least a brief description of how this script works?



Rep: (0)
* Rodstvennik63 , Hand I feel a vibration. When turned off, silence, here and thought that it just works, I use infrequently, 1.2 times a day. Therefore, I ask your advice ...



Rep: (238)
* Ambrov,
Sometimes, not always, the RTC may issue a white (external) ip. The script looks, which received ip router, and if the ip range of gray, then resets the connection and connect again until you get a white, on which you can climb on a remote router or home network thanks to the DDNS service. It may happen that the RTC and will not give a "normalВ» ip, respectively, and the Internet will not have to turn off the script, and conclude that you are not lucky.

* kivikprk, I never stopped completely screw. When you call him, he certainly began to spin faster, but never completely stopped. Thus yuzal different hdd- behavior was the same everywhere.

Post has been editedRodstvennik63 - 13.03.19, 21:30



Rep: (0)
Two interesting questions :)

1. What is bad about PandoraBox? This is the same OpenWRT, but with proprietary modules for our WiFi, right?

2. Are there any Wive-NG-MT builds for our router?



Rep: (66)
molotokspb @ 13.03.2019, 23:24*
Two interesting questions

1. What is bad about PandoraBox? This is the same OpenWRT, but with proprietary modules for our WiFi, right?

It is a fork with its own characteristics. Many Chinese. Harder to get the source code.
molotokspb @ 13.03.2019, 23:24*
2. Are there any Wive-NG-MT builds for our router?

Not. We wive no support nand flash.



Rep: (238)
* alexnik81,
Why so categorically? Yes, nand no, but with spi memory can be.



Rep: (279)
Ambrov @ 13.03.19, 21:20*
and can be at least a brief description of how this script works?

Looks first octet received from the provider addresses, if everything is bad, then reconnects wan, to get a new address. And so, until you arrive a good address.

Post has been editedDart raiden - 14.03.19, 02:03



Rep: (0)
Good day.

Tell me, please, whether it is possible to drain the firmware fasten paid VPN (eg, PureVPN), to have access to Google in China?



Rep: (20)
Good afternoon! When the firmware, you can use the flash drive volume greater than 16 GB? One of these days should come to 128 GB, and the other I do not have.



Rep: (238)
Troll73 @ 14.03.19, 11:23*
When the firmware, you can use the flash drive volume greater than 16 GB? One of these days should come to 128 GB, and the other I do not have.

Yes it is possible though to use the 256Gb, but not to a router)) Useinstructions for installation Breed without the stickAnd everything will be fine!)



Rep: (0)
Prompt. There are two Router Mi-3G with firmware Padavan, want to expand the Wi-Fi network. Incoming rate 500Mbit. From the main router on Lan produces for 500Mbit, via Wi-Fi for 200Mbit. A second (repeater) by Lan connection (Lan / WAN). no more than 50 Mbit of Wi-Fi. According to the Wi-Fi connection to 40 Mbit. of Wi-Fi. Maybe something did wrong, why the second router, any connection via Wi-Fi speed does not rise above 50 Mbit. ??? Maybe it's in the wireless mode, deleting obsolete - the rate of rise. But on the ground, too, all selected modes and speed standards ... And I still left the second router to router mode, can it is necessary was to the access point, because Lan is not claimed.!

Post has been editedGerman_gad - 14.03.19, 13:09



Rep: (8)
Good afternoon! Guys tell me what's wrong. Worth router firmware from Padawan at at 5Hz internet works fine on 2.4 barely barely pages loaded, although the signal is much better.

Attached images
Attached Image
Attached Image



Rep: (62)
German_gad @ 14.03.19, 11:14*
Yes, and I still left the second router to router mode,

* German_gad,
That's poprobuyte.Rezhim Access point.

Post has been edited_kentavr_ - 14.03.19, 13:29



Rep: (59)
mitnick @ 14.03.19, 15:30*
reliable speed - iperf

I take this as iperf'om measure the speed of the internet, rather than on a local network?

Post has been editedpushkagun - 14.03.19, 13:39



Rep: (62)
pushkagun @ 14.03.19, 12:38*
mitnick @ 14.03.19, 15:30
reliable speed - iperf

I take this as iperf'om measure the speed of the internet, rather than on a local network?

* pushkagun,
Yes, the local network is really possible to measure speed without affecting the provider. And from then on, you can see if the results are consistent with spidtestom-means something you do not like that. If not - then the provider.

Post has been edited_kentavr_ - 14.03.19, 13:50



Rep: (166)
* pushkagun,
You need a partner in the internet
for example - public server, naprmer provider or you are interested in the region
https://iperf.fr/iperf-servers.php



Rep: (196)
* mitnick
And as a result of the practical benefits of this are not more than from speedtest. One packet went on one route and the other on the other, any node or a channel at a particular moment is loaded, a fraction of a second is free, meaning all these figures, if they can not be influenced.
iperf is designed to help in setting up a local area network, speedtest to the ISP server (if available) or the popular torrent to check the line. The rest is meaningless little less than full.


Full version    

Help     rules

Time is now: 18/02/20, 13:05