Archer C7 - Discussion | Wi-Fi Router



Rep: (0)
TP-Link Archer C7 (AC1750 Dual Band Wi-Fi Gigabit Router)- Discussion
Wi-Fi Router 802.11a / b / g / n / ac | 2.4GHz frequency (450Mbit \ s) | 5GHz frequency (1300Mbit \ s) | LAN 4x1000Mbit \ s | USB 2x2.0 type A |

Attached Image

The forum decided to post images under the spoilerPicture

Specifications
HARDWARE CHARACTERISTICS
Interface 4 LAN ports 10/100/1000 Mbit / s
1 10/100/1000 Mbps WAN port
2 USB 2.0 ports
Buttons WPS / Reset Button
Wireless on / off button (wireless on / off)
Power On / Off Button
External power supply 12 V DC / 2.5 A
Dimensions (WxLxH) 243 x 160.6 x 32.5 mm
Antenna type 3 removable 5 GHz antennas with 5 dBi gain (RP-SMA)
3 internal 2.4 GHz antennas

PARAMETERS OF WIRELESS MODULE
IEEE 802.11ac / n / a wireless standards for 5 GHz frequency
IEEE 802.11b / g / n for the 2.4 GHz frequency
Frequency range (receive and transmit) 2400-2483.5 MHz
5150-5350 MHz
5 GHz transmission speed: up to 1300 Mbps
2.4 GHz: up to 450 Mbps
Sensitivity (reception) 5 GHz пјљ
11a 6 Mbps -96 dBm
11a 54 Mbps: -79 dBm
11ac HT20: -71 dBm
11ac HT40: -66 dBm
11ac HT80: -63 dBm
2.4 GHz
11g 54M: -77 dBm
11n HT20: -74 dBm
11n HT40: -72 dBm
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless functions Enable / disable wireless broadcast, WDS bridge, WMM, wireless connection statistics
Wireless Security Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK

CHARACTERISTICS OF SOFTWARE
QoS (data prioritization) WMM, bandwidth control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Protocols Supports IPv4 and IPv6
Shared via USB Support Samba (storage device) / FTP server / media server / print server
2.4 GHz guest network guest network
one 5 GHz guest network

OTHER
CE, FCC, RoHS certification
Package Archer C7
3 removable antennas
Power adapter
Ethernet cable
Quick Setup Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista в„ў or Windows 7, Windows 8 / 8.1 / 10
MAC OS, NetWare, UNIX or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ - 40
Storage temperature: -40 в„ѓ - 70 в„ѓ
Operating Humidity: 10% - 90%, without condensation
Humidity during storage: 5% - 90%, without condensation
Firmware
Dumps
Attached fileРЎ7V2.zip(8.95 MB)
Useful

The curator of the topic isN.o.F.a.c.e.


Post has been editedN.o.F.a.c.e. - 15.07.19, 18:23



Rep: (32)
Here I also have a question about the version of iron. The goal is to distribute the Internet for a three-ruble note with concrete walls, now 841 can not cope, although it is not enough a bit.
In the stern of this I want to connect a usb drive as storage. 1. have ftp access.
2. Have wi-fi access to this drive within the network.

Good wallpapers, do I take a steam bath by version or take it calmly? In general, what I want is feasible ???
Plus with me



Rep: (1)
v2 is not updated
v4 is updated
and about ftp it will be possible to get through from everywhere. having also a white ip then you can get from outside
I have v2 - but I would change it to v4 (not because of stability, but because of the functionality (there is vpn))

Post has been editedovergrow - 25.02.18, 08:40



Rep: (3)
NuN70 @ 02.24.18, 16:36*
There are also firmware for v4

I understand that if now there are not as many as 2, then in the future this situation will change for the better? How do you think?

Japet @ 02.24.18, 16:19*
Looking for what you router.
If for flashing - look for v2, of course.
And if you set it up and forget it in the closet, any revision will completely come down.

For me to forget on the closet, but when life seems boring, so that was something to do))))
To know that there really has changed. If something has become really better in v4, then you can also sacrifice firmware, especially since this is possible temporarily. If there are no improvements, then it makes sense to take v2, for greater compatibility. Or maybe v4 even got worse. Unclear :(

Posted on 02/25/2018, 16:52:

v2 is not updated
v4 is updated

In terms of v2, have native firmware stopped ceasing to be released?



Rep: (5)
Tell me, pliz.
I want to buy on Ali WDR7500 V6 Archer C7
https: //ru.aliexpress...er-T.../32757591741.html
What is V6 fraught with and is it possible to stick OpenWRT / LEDE on it?
What is the declared eSATA interface and where is it from?



Rep: (2)
Sav13 @ 02.27.2018, 21:03*
Tell me, pliz.
I want to buy on Ali WDR7500 V6 Archer C7
https: //ru.aliexpress...er-T.../32757591741.html
What is V6 fraught with and is it possible to stick OpenWRT / LEDE on it?
What is the declared eSATA interface and where is it from?


On the site, the latest revision rev 5 was on the site, but no one saw it in the market as I understand it. so ver 6 it’s not understand where they got it from and what this ver refers to) they are Chinese)))

Post has been editedkasatkin777 - 27.02.18, 21:25



Rep: (6)
Please tell me, there is v2. There were frequent freezes, disabled hardware NAT. It has become more stable, but now I'm just trying to use samsung connect, so it hangs tight again. Maybe someone knows a solution to the problem?



Rep: (240)
Put LEDE and enjoy the work of the router.



Rep: (6)
* D @ nge1 , the functionality is the same, I still have an Internet distributing from the whistle iota



Rep: (240)
And there will be distributing



Rep: (6)
* D @ nge1 , I'm stupid, please tell me what exactly to download for my router.



Rep: (240)
* makcim.999999
http: //downloads.openw...2-squashfs-factory.bin



Rep: (6)
* D @ nge1 , thanks, I asked, now I can’t access the web face



Rep: (240)
The web muzzle responds at 192.168.1.1. There is no default password.

Post has been editedD @ nge1 - 28.02.18, 13:46



Rep: (6)
* D @ nge1 , that is the fact of the matter that does not respond



Rep: (3)
Kasatkin777 @ 02.28.18, 00:24*
On the site, the latest revision rev 5 was on the site, but no one saw it in the market as I understand it. so ver 6 it’s not understand where they got it from and what this ver refers to) they are Chinese)))

As far as I understand, this is the official version of the router for the Chinese market. And it’s kind of like you can put LEDE on it, anyway I saw this version in the compatibility table



Rep: (6)
* D @ nge1 , went to the web face, please tell me how to run a usb modem?



Rep: (0)
* NuN70,
The port is idle :( I had to stick the switch.



Rep: (240)
* makcim.999999
I'll get to the house, help. While driving.



Rep: (240)
* makcim.999999 unsubscribed in drugs.



Rep: (1)
* ralgis
In terms of v2, have native firmware stopped ceasing to be released?

the latest firmware was almost a year ago, and the crack vulnerability was not fixed (although the firmware was fixed on all the others), and those who support it say that it is unlikely that there will be a firmware release
The router itself drags a lot, but for some reason they decided to do so in the company, either stay on what it is, or switch to v4, well, or switch to Archer C2300 in general (new in new products, and it will be 10 times more powerful (128 MB 512 permanent operatives, dual-core percent 1.8 GHz, removable antennas (transplant x3 at 9 dBi) + all the latest modern technologies are present there, and the price is not much more expensive)

Post has been editedovergrow - 01.03.18, 20:13


Full version    

Help     rules

Now: 08/14/19, 00:43