Archer C7 - Discussion | Wi-Fi Router
РЎ7V2.zipother tips:
1. put an ftp server and firmware in a folder with a simple name without Russian and gaps in the root directory with. something type C: / ftp
2. Turn off all unnecessary programs. It is better to reboot "bezoapasny mode for network adapters."
ps For the new router always have time. kill him is not easy. Another option - flash across someone cable (not very difficult but it is desirable to be able to solder) and extreme option - flash vleshku on an external programmer (and need a specialist equipment).
Post has been editedNaevus - 14.07.19, 17:22
1. put an ftp server and firmware in a folder with a simple name without Russian and gaps in the root directory with. something type C: / ftp
2. Turn off all unnecessary programs. It is better to reboot "bezoapasny mode for network adapters."
ps For the new router always have time. kill him is not easy. Another option - flash across someone cable (not very difficult but it is desirable to be able to solder) and extreme option - flash vleshku on an external programmer (and need a specialist equipment).
Post has been editedNaevus - 14.07.19, 17:22
Reason for editing: ps
all who responded thank you very much, but ... to flash through the normal lan port rather than through a wan. Through wan no reaction at all was not, but once through the lan. And the reason was really my adapter usb-ethennet. It is necessary to sew through a conventional computer with ethernet (I used a regular laptop).
Yet now the question on OpenWrt on my router if wifi settings where 5g - works only on channel 36. It is normal? If the exhibitor on the car, it does not work. So we all?
Hello!
Please help with instructions on how to get the ART-section of the dump firmware!
Tell me, please, what commands to use to get the ART section of the firmware dump?
Please help with instructions on how to get the ART-section of the dump firmware!
Tell me, please, what commands to use to get the ART section of the firmware dump?
sony_vaio @ 21.07.19, 11:35
Comrades, may I own the Russian archer c7v4 flash the firmware in the US?
pereproshivat v2, v4 do not know - I think that you can try, if you do not go then will the message and everything will remain as it was.
sony_vaio @ 21.07.19, 12:07
then something has changed in the US firmware
Changes you can read on the site,
each firmware by regions / countries of the world your wifi In accordance with the regulations of the countries.
In the US firmware is the biggest power.
seydon @ 13.04.19, 18:31
Immediately I tried to install dd-wrt (the last for this version). Through a web interface to deliver, but the overload was a brick.
After spending a lot of time trying to restore via TFTP. Restored only if the slip him the latest firmware to the office site.
All other firmware (dd-wrt, openwrt, the older firmware from the site) simply do not sew. With TFTP - just nothing changes (is the version that was), via the web interface does not accept the old firmware.
And now what i can do?
Even symptoms - when flashing Openvrt, DDVRT - miracles begin with indicators LAN connection (or not burning those ports are plugged cord, or burn the port remains lit even when the elongated cord).
With DDVRT device does not even pinged with OPENVRT - pinged but telnet and web does not respond.
After spending a lot of time trying to restore via TFTP. Restored only if the slip him the latest firmware to the office site.
All other firmware (dd-wrt, openwrt, the older firmware from the site) simply do not sew. With TFTP - just nothing changes (is the version that was), via the web interface does not accept the old firmware.
And now what i can do?
Even symptoms - when flashing Openvrt, DDVRT - miracles begin with indicators LAN connection (or not burning those ports are plugged cord, or burn the port remains lit even when the elongated cord).
With DDVRT device does not even pinged with OPENVRT - pinged but telnet and web does not respond.
Absolutely the same story, the same C7 ver.5 RU, freewheeling through web face DD-WRT, too okirpichil, restored through LEDE and slipped native firmware.
So now I sit and I scratch turnip - what to put?
Accustomed to the DD-WRT, I have it on TP-Link 4300 for 5 years running, only occasionally reboot.
Advise, as well?
eugene97rus, Now this freewheeling through web face (previously stopped antivirusnik) 
factory-to-ddwrt.bin.txt (14.15 MB) Only it is necessary to remove the txt extension
 |
Small instruction.
1. Nakata dd-wrt (attached)
2. coasting through LEDEthis
3. Came throughWinSCPand threw a folder on your router / tmp thisfirmwareorDD-WRT
4. renamed it in 1.bin (better to rename the computer, and then transfer)
5. After the command sysupgrade -n /tmp/1.bin updated to complete OpenWRT or DD-WRT, whichever is slipped
 |
Post has been editedSheldonIEA - 28.07.19, 21:14
Reason for editing: screenshot
The trouble came to me. Get off time settings after a reboot of the router. Different server time synchronization tossed, there is no result.
I wanted to turn off the wi-fi on the schedule, but here is ...
Post has been editedExpoel - 01.08.19, 22:08
I wanted to turn off the wi-fi on the schedule, but here is ...
Attached images
 |
Post has been editedExpoel - 01.08.19, 22:08
Need advice. I turned up Tp-Link Archer C7 AC1750 v.3 American version, whether to take? As with iOS and stability work in Ukraine? The signal level? Power steering signal as I understand the FCC is higher than the Council of Europe. As the unofficial firmware is not going to.
Post has been editedRUSSIA_VDV - 03.08.19, 09:48
Post has been editedRUSSIA_VDV - 03.08.19, 09:48
Reason for editing: Incorrectly formulated
I wanted to ask, and the lights should be flashing or just lit? I just lit green and not flashing. As far as I have seen with other routers is always flashing.
sony_vaio @ 03.08.19, 13:08
and the lights should be flashing or just lit
then v2 - cm. p. 4
https: //static.tp-link...er_C7 (US) _V_2.0_UG.pdf
RUSSIA_VDV, if you use it at home, then you none of this does not scold. And so very normal piece of iron for their money.
use for 10 days showed smart speed of pravaydera (98 Mbit / s over ethernet and 92 Mbit / s on a 2.4 GHz WiFi) and within the network (between the NAS and the PC to the road from the SSD 92 Mbytes / s) on the TV operates 5GHz normally does not fall off, 4k film looked loose from the local network with and active use of an Internet 5tyu devices (mobile telephones 3, one PC and one laptop) even on Skype to communicate at this time.
In general, very happy this piece of iron. especially after the transition to OpenWRT.
Posted 04/08/2019, 8:42:
sony_vaio, and that you are interested to set up?I wanted to install a router dd-wrt or openwrt. openwrt very hard to set up, and found that only works on 5GHz 36 Canela. probably some glitches that. I wanted to know what settings who prescribes.
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement