Archer C7 - Discussion | Wi-Fi Router



Rep: (0)
TP-Link Archer C7 (AC1750 Dual Band Wi-Fi Gigabit Router)- Discussion
Wi-Fi Router 802.11a / b / g / n / ac | 2.4GHz frequency (450Mbit \ s) | 5GHz frequency (1300Mbit \ s) | LAN 4x1000Mbit \ s | USB 2x2.0 type A |

Attached Image

The forum decided to post images under the spoilerPicture

Specifications
HARDWARE CHARACTERISTICS
Interface 4 LAN ports 10/100/1000 Mbit / s
1 10/100/1000 Mbps WAN port
2 USB 2.0 ports
Buttons WPS / Reset Button
Wireless on / off button (wireless on / off)
Power On / Off Button
External power supply 12 V DC / 2.5 A
Dimensions (WxLxH) 243 x 160.6 x 32.5 mm
Antenna type 3 removable 5 GHz antennas with 5 dBi gain (RP-SMA)
3 internal 2.4 GHz antennas

PARAMETERS OF WIRELESS MODULE
IEEE 802.11ac / n / a wireless standards for 5 GHz frequency
IEEE 802.11b / g / n for the 2.4 GHz frequency
Frequency range (receive and transmit) 2400-2483.5 MHz
5150-5350 MHz
5 GHz transmission speed: up to 1300 Mbps
2.4 GHz: up to 450 Mbps
Sensitivity (reception) 5 GHz пјљ
11a 6 Mbps -96 dBm
11a 54 Mbps: -79 dBm
11ac HT20: -71 dBm
11ac HT40: -66 dBm
11ac HT80: -63 dBm
2.4 GHz
11g 54M: -77 dBm
11n HT20: -74 dBm
11n HT40: -72 dBm
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless functions Enable / disable wireless broadcast, WDS bridge, WMM, wireless connection statistics
Wireless Security Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK

CHARACTERISTICS OF SOFTWARE
QoS (data prioritization) WMM, bandwidth control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Protocols Supports IPv4 and IPv6
Shared via USB Support Samba (storage device) / FTP server / media server / print server
2.4 GHz guest network guest network
one 5 GHz guest network

OTHER
CE, FCC, RoHS certification
Package Archer C7
3 removable antennas
Power adapter
Ethernet cable
Quick Setup Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista в„ў or Windows 7, Windows 8 / 8.1 / 10
MAC OS, NetWare, UNIX or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ - 40
Storage temperature: -40 в„ѓ - 70 в„ѓ
Operating Humidity: 10% - 90%, without condensation
Humidity during storage: 5% - 90%, without condensation
Firmware
Dumps
Attached fileРЎ7V2.zip(8.95 MB)
Useful

The curator of the topic isN.o.F.a.c.e.


Post has been editedN.o.F.a.c.e. - Today, 18:23



Rep: (6)
Good afternoon!

I flashed my devicelede-17.01.4-ar71xx-generic-archer-c7-v2-squashfs-factory. No matter how he fought, he could not raise IpTV.
I read everyone. No result.
Utilitiesigmpproxyandudpxyestablished. How to make them work, did not understand.
Tell me, how to make IpTV work on lede?



Rep: (277)
* VAV_007,
https: //wiki.openwrt.o...oc/howto/udp_multicast
And find out from your provider about the settings



Rep: (6)
NuN70 @ 2.03.18, 15:34*
just studying these branches.
How to "execute the command"? Where can I get the "console"?
The simplest settings. No VLAN id.



Rep: (360)
VAV_007 @ 03/02/18 09:56*
Where can I get the "console"?

TP-Link TL-WR841 - Discussion



Rep: (6)
Herzz @ 03/02/18 18:14*
TP-Link TL-WR841 - Discussion

Plus!
I'm going to dig further! :-)



Rep: (6)
VAV_007 @ 03/02/18, 18:35*
I'm going to dig further

In general, nothing was excavated.
With the help of tutty and WinSCP, I made the necessary changes to the config files, but the multicast did not fly.
Returned to stock firmware. There is no dance with a tambourine.



Rep: (360)
VAV_007 @ 03/02/18 13:58*
In general, nothing was excavated.

https: //homenet.beelin...%82%D0%B2%D0%BA%D0%B8/



Rep: (6)
Herzz @ 2.03.18, 21:32*
Well, at the weekend I will do the next swim. And then the relatives for the TV will strangle.
The main cable from the router works. There are two more on WiFi.



Rep: (6)
* D @ nge1 , thanks for the help. I requested ROOTer. It all worked itself



Rep: (8)
Has anyone got the firmware? I have an update v.4, updated. In my narrow-minded view, nothing has changed))

The question is, does anyone on the smartphone play Mobile legends? I have this game that has micro-friezes, especially when we play three or four people from one wifi, I don’t have any problems with the rest. Who faced?



Rep: (1)
Good day. I want to install custom firmware on the Archer C7 v4 router.
Link* NuN70, for v4 there are two files:
archer-c7-v4-squashfs-factory.bin
archer-c7-v4-squashfs-sysupgrade.bin
Tell me please what of them what? What is the firmware file?
Thank you in advance.



Rep: (360)
* alexvg1980
The first. The second update is not necessary.



Rep: (1)
* Herzz, thank you +



Rep: (1)
Good day. Wired archer-c7-v4-squashfs-factory.bin wifi does not work. What to do? 192.168.1.1 and 192.168.0.1 does not enter. How to roll back to factory settings or flash off-firmware? Thank you in advance.
Probably wrong stitched. Help me fix it. On the wire on a laptop Internet is.

Post has been editedalexvg1980 - 08.03.18, 16:14



Rep: (360)
alexvg1980 @ 03/08/18, 14:33*
Don `t come in.

Cache clear.
In Chrome Ctrl + H

Post has been editedHerzz - 08.03.18, 16:16



Rep: (1)
* Herzz , but as? I already pressed and turned on the reset. I do not know what to do.

Post has been editedalexvg1980 - 08.03.18, 16:16



Rep: (2)
* Herzz ,
I'm a little confused by the file size of this firmware, only 3 MB. For v2, it's 15 MB, the factory is also 15 MB.
About two weeks ago I decided not to sew this firmware.



Rep: (277)
* alexvg1980
1. WiFi after the first firmware is disabled for security purposes.
2. Clean browser cache and connect via ethernet.



Rep: (1)
* Nun70 , did not help. I found it installed without a webmord. Thank you. Herzz prompted. With the help of the SW. Herzz is trying to roll back to off-firmware. not yet obtained.

Post has been editedalexvg1980 - 08.03.18, 17:06



Rep: (277)
* alexvg1980
So for v4 in the firmware and there is no luci, you need to install it through the console with the rest of the packages


Full version    

Help     rules

Now: 07/15/19, 23:00