Assistant
REPLY |
Orange Pi Prime - discussion | [SBC] H5 Quad-Core, 2Gb ddr3 |
Message#1 13.07.17, 07:59 | |
Lord of Gadgets [offline] Group: Curators Messages 475 Check in: 03.03.14 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 41 | Orange Pi PC 2 | Orange pi zero | Orange pi lite | Orange pi prime | Orange Pi Plus | Orange Pi 2G-IOT | Orange Pi Zero Plus 2 | How do I get an Orange Pi? Orange pi prime Important information
OS / OS Installation Instructions Orange Pi -supports ArmLinux, Lubuntu, Raspbian, Android, Kali Linux and etc. Full listhere Instruction: We will need: • HP USB Disk Storage Format Tool • Win32 Disk Imager • SDHC card (at least 4GB / 6 class) The following is a description of the OS installation: 1. Format the SD card using HP USB SFT. To do this, select the letter of your SD card in the program (for example, F: \), tick the Quick Format box and select FAT32 FS. 2. Open an OS image in Win32 DI, select your SD card, click on the "Write" button 3. It remains to insert the card in OPi and boot.Does not apply to Android. Installing Android: 1. Insert the micro SD card into the computer. Remember that the card must be at least 4 GB and its class must be at least 10th. Best suited for this card brand SanDisk. 2. Download the official Anrdoid distribution from this link:http://www.orangepi.org/downloadresources/ 3. Unzip the "Android". 4. Download the "PhoenixCard" program from this link:http://orangepi.su/files/PhoenixCard.rar 5. Unzip the "PhoenixCard" and run. 6. In the window that opens, specify the path to the memory card, in the "Write Mode" section, specify "Product" and click "Format to normal". If everything goes well, you will see the message "Format card to normal mode success". 7. To write the OS "Android" on the memory card, specify the path to it in the column "Img file", in the column "Write mode" select "Startup" and click "Burn". 8. At the end of the process, click "Exit". Done! Now you can insert your card into the computer "Orange Pi" and run it. Remember that the first launch lasts longer than usual! Useful Information / Instructions / Links How to remove CPU overclocking 1. On all Orange Pi from the factory, it is worth overclocking, it is better to remove it. often processors are burned. 2. As they say in all forums, the board is very demanding on the speed of a microSD card! It is recommended to take a card with a speed not lower than Class 10 UHS-1, otherwise no OS will work acceptably, it has been tested on itself. Here is the instruction: 1. Create a .sh file and enter this: #! / bin / bash export PATH = / usr / local / sbin: / usr / local / bin: / usr / sbin: / usr / bin: / sbin: / bin if ["$ (id -u)"! = "0"]; then echo "This script must be executed as root. Exiting>&2� exit 1 fi Fex2Bin = "$ (which fex2bin)" if ["X $ {Fex2Bin}" = "X"]; then apt-get -f -q -y install sunxi-tools fi Path2ScriptBin = "$ (df | awk -F" "'/ ^ \ / dev \ / mmcblk0p1 / {print $ 6}')" if [! -f "$ {Path2ScriptBin} /script.bin"]; then echo "Can not find script.bin. Ensure boot partition is mounted ">&2� exit 1 fi MyTmpFile = "$ (mktemp /tmp/${0##*/}.XXXXXX)" trap "rm \" $ {MyTmpFile} \ "; exit 0" 0 1 2 3 15 bin2fex<"$ {Path2ScriptBin} /script.bin" | grep -v "^ LV" | grep -v "^ max_freq" | grep -v "^ min_freq" | grep -v "^ extremity_freq">"$ {MyTmpFile}" if [$? -ne 0]; then echo "Could not convert script.bin to fex. Exiting>&2� exit 1 fi cp -p "$ {Path2ScriptBin} /script.bin" "$ {Path2ScriptBin} /script.bin.bak" sed -i '/ \ [dvfs_table \] / a \ extremity_freq = 1296000000 \ max_freq = 1200000000 \ min_freq = 480000000 \ LV_count = 7 \ LV1_freq = 1296000000 \ LV1_volt = 1320 \ LV2_freq = 1200000000 \ LV2_volt = 1240 \ LV3_freq = 1104000000 \ LV3_volt = 1180 \ LV4_freq = 1008000000 \ LV4_volt = 1140 \ LV5_freq = 960000000 \ LV5_volt = 1080 \ LV6_freq = 816000000 \ LV6_volt = 1020 \ LV7_freq = 480000000 \ LV7_volt = 980 '"$ {MyTmpFile}" fex2bin "$ {MyTmpFile}" "$ {Path2ScriptBin} /script.bin">/ dev / null if [$? -ne 0]; then mv "$ {Path2ScriptBin} /script.bin.bak" "$ {Path2ScriptBin} /script.bin" echo “Writing script.bin went wrong. Nothing changed »>&2� exit 1 fi echo “Successfully repaired broken overvolting / overclocking settings. Reboot necessary for changes to take effect » 2. Copy to your home directory and write 3 commands: chmod + x fix.sh sudo ./fix.sh sudo reboot If you want to buy You can buy off. Store (Aliexpress):tyk User activity Off site -tyk Link to download images:tyk ArmBian -tyk(Topic uv. TabletPC007) RetroPie for Orange Pi! Group in Telegram. Join now! Do you want your post to be in a hat? Write mehere Post has been editediiputilo - 31.12.18, 23:17 Reason for editing: Added: "RetrOrangPi Theme" |
Message#42 03.08.17, 10:32 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 02.08.14 Xiaomi Redmi 4X 3/32 Reputation: 9 | |
Message#43 03.08.17, 14:26 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 298 Check in: 17.03.11 HP iPAQ h2210 Reputation: 38 | shawls size 98 * 60 together with a technological piece of PCB, and without it - 93 * 60. |
Message#44 03.08.17, 17:08 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | That is, a strip of 5 mm where the USB connectors can be safely cut out with a dremel or a mini-grinder neatly? I'll come home and take off the size of the protruding parts of Prime. Post has been editedtaraz1 - 03.08.17, 17:09 |
Message#45 03.08.17, 21:19 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | I look at my Prime - the Chinese cut the edge of the board themselves - March 2017, the spilino is not very even - length is 93-94 mm, width is 60 mm. |
Message#46 05.08.17, 14:36 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | https: //www.aliexpress...a01-67f2c799891d&tpp=1 The Chinese assures that Prime will rise in this building ... |
Message#47 05.08.17, 20:41 | |
Lord of Gadgets [offline] Group: Curators Messages 475 Check in: 03.03.14 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 41 | |
Message#48 06.08.17, 06:01 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | Who works with GPIO comb - does Prime turn it 180 degrees or did it seem to me? That is, 1 foot on the outside (edge) of the board. In OpiPC and Raspberry it is the same (1 foot) on the inside of the board ... That is, the whole periphery will have to be turned upside down in Prime? |
Message#49 06.08.17, 15:14 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | Prime continue to test. I rolled Ubuntuhttp: //www.orangepi.or...3615c3d08cc1efb22.html An image of more than 3 Gig. Works, updated, updated many packages for quite a long time. Wi-Fi built-in also went. In Armbian, it did not start up automatically. Percent is not heated very much. On it, 2 copper radiator sandwich. There is no default web browser, but a lot of unnecessary games are installed. Pulse-Audio Volume Control for some reason also did not start. |
Message#50 07.08.17, 05:27 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 02.08.14 Xiaomi Redmi 4X 3/32 Reputation: 9 | [email protected], 18:36 The Chinese assures that Prime will rise in this building ... Hey. I have ordered one. After a month, maybe less I will check how it will fit. I rolled Ubuntuhttp: //www.orangepi.or...3615c3d08cc1efb22.html It is very interesting how the video at least full-HD looks :) |
Message#51 07.08.17, 07:24 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | Disappoint: the Chinese responded again after the weekend about the case, some details do not match, I understand that the display connection. This is not suitable with the Prime board. Cause the position of the parts are different. sun sunny: Hello Orange Pi Prime perfectly. I want you to get one. A link to the video is small in this resolution, throw - I will test ... |
Message#52 07.08.17, 08:25 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 298 Check in: 17.03.11 HP iPAQ h2210 Reputation: 38 | Depends on which side to look at the scarf. If the raspberries and oranges are positioned so that the USB and Ethernet connectors are on the right, then the GPIO connectors match the pinout, but on the raspberry it will be on top of the board, and on the orange - below. And if the boards are positioned so that the GPIO connectors on both are on top, then the orange will be rotated 180 degrees. Ie. the periphery really needs to be deployed. [email protected], 07:24 the Chinese again answered after the weekend about the case, some details do not match p.s. And at the expense of "lcd interface" all the garbage was written: It is neither in prime, nor in plus 2e. It is only in orange pi win and win plus Post has been editededukra - 07.08.17, 08:47 Reason for editing: added p.s. |
Message#53 07.08.17, 09:11 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 889 Check in: 29.03.09 Reputation: 66 | [email protected], 08:25 Interestingly, and he tried on, or just figured on the pics. I think it is unlikely he unpacked the handkerchief, otherwise how then to sell it. steven zhao is a direct manufacturer (or rather, the one who does xunlong PR), so I think he has the exact info ... |
Message#54 07.08.17, 09:30 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 02.08.14 Xiaomi Redmi 4X 3/32 Reputation: 9 | |
Message#55 07.08.17, 09:38 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 298 Check in: 17.03.11 HP iPAQ h2210 Reputation: 38 | [email protected], 09:11 I think he has the exact info |
Message#56 07.08.17, 09:57 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 02.08.14 Xiaomi Redmi 4X 3/32 Reputation: 9 | Question: where to apply power 5V on the comb gpio? On VCC-5V (there are several of them)? Posted on 08/07/2017 09:59: [email protected], 11:24 the Chinese again answered after the weekend about the case, some details do not match It does not matter. Needle files to undercut or make a new hole can be so that you can not tell from the factory (almost). The main thing is that the board itself stands up smoothly, and most of the connectors still match. |
Message#57 07.08.17, 11:11 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 298 Check in: 17.03.11 HP iPAQ h2210 Reputation: 38 | There are 2 pins nearby 5v - it is possible on any of them, but if there is a charging cord from the PSP, then you can try it. The connector will fit exactly, but once I got a copy with a thin wire and a large voltage drop. I had to bite off the plug and solder a normal wire to it. |
Message#58 07.08.17, 11:16 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | About 1 foot in the GPIO comb at Prime it is outside, and the PC inside also means that if you install the DS3231 real-time clock modulehttp://www.dx.com/p/ds…r-arduino-black-277258then in the PC model, it looks inside the case with the response part of the board. while the Prime model has a part with a microcircuit and an ionistor, it will look outside the case and it simply will not close in size; So? |
Message#59 07.08.17, 12:39 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 298 Check in: 17.03.11 HP iPAQ h2210 Reputation: 38 | Yes, you need to solder the plug on the other side of the handkerchief, then it will be above the orangeWell, the price of DX! On Alik, such a clock is 3 times cheaper. Post has been editededukra - 07.08.17, 12:40 |
Message#60 07.08.17, 13:39 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 02.08.14 Xiaomi Redmi 4X 3/32 Reputation: 9 | I rolled Ubuntuhttp: //www.orangepi.or...3615c3d08cc1efb22.html Tell me please, did the video with hdmi go right away? After uploading the image, the video does not go to Ubuntu. Need to take a tambourine and edit through ssh? |
Message#61 07.08.17, 14:00 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 173 Check in: 27.01.17 Reputation: 4 | Yes for HDMI video Ubuntu Desctop immediately went. I have an HDMI-to-VGA adapter. As for the case below, Prime models and 2E camera connectors from different sides on the right and left above. Post has been editedtaraz1 - 07.08.17, 14:25 |
mobile version | Now: 04/29/19 08:02 |