[X]Assistant

[Dimonn9]

Tele2 Mini 1.1 - Firmware
Tele2 Mini (1.1)
Description | Discussion пїЅ | Firmware пїЅ | Modifications and decorations пїЅ

Important information!

• Firmware for the usual Tele2 Mini are discussed in the Subject:Tele2 Mini Firmware
  
• Phone Tele2 Mini (1.1) has several versions of hardware revisions! You can find out what revision you have.here.
  
• The most common questions about using the phone are described inF.A.Q.
  
• Before any changes in the phone system, be sure to doBACKUP!
  
• What is the best firmware?
  

Drivers and Utilities

• Firmware and other drivers, the current version of the SP Flash Tool
  
• A utility for repacking ROM_Backup into blocks for flashing via the Flash Tool
  

Firmware

Official firmware

• For the first revision
  
  • Official firmware for Tele2 Mini 1.1 under SP Flash Tool V01.01.from 10/23/2016
    
  • Official firmware for Tele2 Mini 1.1 under SP Flash Tool V01.01.from 11/17/2016
    
  • Official firmware for Tele2 Mini 1.1 under SP Flash Tool V01.01 of 04/04/2017
    
• For the second revision
  
  • Tele2_Mini_1.1_V01.03.20161117 under SP Flash Tool
    
• For the third revision
  
  • R3-Tele2-Mini-1.1 dated 05/05/2017 for Flash Tool
    
  • Tele2_mini_1_1_V01.01.20170524 Revision 3 for the Flash Tool

Unofficial firmware

Attention!For flashing custom from the first revision to the third useBoot.img to install custom firmwares for revision III. If the required boot.img is not there, then send it to me atQMSBoot.img from the custom of the first revision, I rebuild.

• For the first revision
  
  • CyanogenMode / LineageOS
    
    • Slim Rom Mod 6 For Tele2 Mini 1.1 Ver 01.01
      
    • CyanogenMod 13
      
    • LineageOS 13
      
    • Remix M
      
    • MokeeOS
      
    • Resurrection Remix 5.7.4
      
    • SlimModUltraLite (SlimROM)
      
    • Remix OS 2.0
      
  • Simple ports
    
    • Zopo Colors C2
      
    • Tst
      
    • Helios
      
    • XOS Chameleon V2
      
    • TEXET
      
    • Cubot Note S
      
    • Lite Mod
      
  • Modified Stock
    
    • Pixel Edition 2018 (lite & full)
      
    • Clean Mod Lite
      
    • Unofficial Stock V01.01 from 04/05/2017
      
    • Unofficial Stock V01.01 from 05/24/2017
      
    • Unofficial Stock-firmware for Tele2 Mini 1.1 for TWRP from 11/17/2017
      
    • Unofficial firmware for Tele2 Mini 1.1 under SP Flash Tool V01.01_20161117
      
    • Firmware Tele2 Mini 1.1 for TWRP
      
    • Clean Mix Lite
      
    • Unofficial Stock-Firmware NEW for Tele2 Mini 1.1 under TWRP from 04/04/2017
      
• For the second revision
  
  • CyanogenMode / LineageOS
    
    • LineageOS 14.1 V1.0 (v01.03) + Patches for installation onV01.01. R1, R3 newfromradbiart
      
    • LOS14_Tele2_1.1v01.03 [7.1.2] by Radbiart
      
    • LineageOS 13
      
    • A.O.K.P
      
  • Simple ports
    
    • Staros
  • Modified Stock
    
    • Backup Stoke. Firmware R2 V01.03 from 04/19/2017 for TWRP
      
    • Cleaned stock for TWRP (backup)
      
• For the third revision
  
  • Modified stock
    
    • Tele2 Mini 1.1 Rev3 (TWRP) newfromschibeki
      
    • Tele2_mini_1.1 for TWRP (Third Revision.)
      
    • Backup firmware for 3rd revision
      

Recommended template for the design of the post with the firmware

Dear porters and romodels, to maintain cleanliness in the topic, it is recommended to issue posts with firmware for this template:

[CENTER] Firmware name [/ CENTER] (Font size is not more than 4, do not use bright font colors.)
[spoiler = Description of the firmware] [LEFT] [url = "http: // here we write a link to the post with the firmware"] Donor [/ url] [/ LEFT] Details, without lyrics. It is advisable to indicate on which core the donor firmware [/ spoiler]
[spoiler = Screenshots] No more than 10-12 [/ spoiler]
[SPOILER = My changes] Write what you did [/ SPOILER]
[spoiler = Bugs] We describe bugs, without lyrics. When corrected, we cross out and write: Fixed [/ spoiler]
[spoiler = Installation] Details on how to install, wipes, etc. [/ spoiler]
[spoiler = Download] Link to gapps here too [/ spoiler]
[SPOILER = Patches, add-ons] If there is. No - we do not add a spoiler [/ SPOILER]
[Spoiler = Disclaimer] Text at your discretion [/ spoiler]
Allowed to add spoilers "Thanks", "Attention", "Firmware Update" at will and need.

Do not forget to add text about the need for backup and, of course, backup of your NVram!

Instructions

• Disabling driver digital signature verification in Windows 8-10
  
• How to make a complete memory dump of the device (ROM_Backup)
  
• Installing firmware via SP Flash Tool
  
• Information on SP Flash Tool errors and solutions found
  
• What is TWRP recovery and how to use it
  
• Installing custom recovery (TWRP)|Important!
  
• GettingRoot
  
• IMEI registration
  
• Testpoint to restore the "brick" | Another option
  
• Instructions for those who do not charge up to 100%
  
• Google Account Bypass (FRP) after Reset | Addition
  
• Hide the item "For Developers" with saving settings
  

TWRP recovery, custom kernels

Important! After TWRP firmware via SP Flash Tool, go to it (on the phone off, hold Volume + and On before entering the menu, select Volume + Recovery mode and press Volume.-), bypassing the boot to the system, otherwise TWRP will be reset to stock recovery!
After installing TWRP, subject to the permission of changes in the system, installation is requiredSuperSUotherwise the system will not boot!

• TWRP
  
  • New TWRP 3.2.1-0 for v0101R1
    
  • TWRP 3.0.3 forR1
    
  • New TWRP 3.2.1-0 for v0103R2(compatible withR3)
    
  • TWRP 3.0.3 forR2
    
  • TWRP 3.1 forR2
    
  • TWRP 3.1.1 forR2
    
  • TWRP 3.0.3 (with the ability to install system.img images) forR2
    
  • TWRP 3.0.3 (with the option to clear the FRP section (Unbind from Google Account)) forR2
  • TWRP 3.1.1 forR3
    
• Custom kernels
  
  • Boot.img to install custom firmware for revision III (updated post)
    
  • Dynamic Status BarV01.01
    
  • Dynamic Status BarV01.03
    
  • Dynamic status bar for Tele2 Mini 1.1 Revision III

miscellanea

• MT6580_Android_scatter.txt | He is in the archive
  
• Reduced power consumption by disabling unnecessary network standards.
  
• Universal patch for porting firmware 1 revision to 2 (Simple firmware)
  
• Universal patch for porting firmware 1 revision to 2 (For Cyans)
  
• Communication module from drains of the first and second revision for TWRP
  
• GApps redirect to official source
  
• Activation of init.d support to the kernel
  
• Patches on the behavior of the "home" buttonfor firmwareSlim Rom Mod 6
  
• Patch for the exchange of places of the buttons "Back" and "Menu" | Rollback
  
• Patch moving task manager from the "Menu" button
  

Topics CuratorDimonn9, on the issue of updating the caps, please contactQMS

Post has been editedDimonn9 - 10.04.19, 20:04

Reason for editing: Hide the item "For Developers" with saving settings

[jemmini]

TWRP 3.0.3 пїЅпїЅпїЅ Tele2 Mini 1.1 download

: recovery.img(10.98 MB)

Recovery collected on the basis of the Android 6.0 kernel kernel version Y8192.JM.L4072.4 + 4.Tele2 Mini.B1B8.6.0.V01.01.20161023 / Sun Oct 23 13:39:02 CST 2016

ATTENTION!! After installing the recovery, subject to the permission of changes in the system, it is mandatory to install SuperSU, otherwise the system will not boot.

GettingROOT

To get ROOT install this patch from TWRP:SuperSU-v2.79-201612051815.zip(5.21 MB)

Stock recovery

Stock recovery from the specified firmware:recovery.img(7.64 MB)

Attached files

MT6580_Android_scatter.zip(1.11 KB)


Post has been editedDimonn9 - 07.03.18, 13:13

Reason for editing: In the header

[barminov1976]

Drivers for Tele2 Mini 1.1
MTK_USB_Al_0.9.8.zip(54.53 MB)

WIN7_WINXP.zip(9.31 MB)

Flasher
SP_Flash_Tool_Win_v5.1628.rar(30.81 MB)



Post has been editedigor_nikitin - 22.09.17, 07:42

Reason for editing: In the header

[barminov1976]

CyanogenMod 13

Port from here

Doogee X6 - Firmware

About firmware

Stable firmware Android 6.0.1.

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card.
Go to Install and select our archive

Gapps

open_gapps-arm-6.0-pico-20161230.zip(111.89 MB)

Download

https: //drive.google.c...BLQUU/view? usp = sharing

Gaps set immediately after the firmware is not overloaded into the system

HAPPY NEW YEAR !!!

Post has been editedigor_nikitin - 22.09.17, 07:42

Reason for editing: Correct network display and radio now works

[barminov1976]

Firmware Tele2 Mini 1.1 for TWRP Recovery

About firmware

Firmware without last update

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card and the device's memory.
Go to Install and select our archive

SuperSU

[SuperSU-v2.79-201612051815.zip(5.21 MB)

Changes

All Tele2 applications have been removed. 3G is enabled on the second slot

Download

https: //drive.google.c...Z4OWc/view? usp = sharing

Post has been editedigor_nikitin - 22.09.17, 07:43

Reason for editing: In the header

[denrusvrn]

Official firmware for Tele2 Mini 1.1 under SP Flash Tool

Official Tele2 Mini 1.1 version V01.01. Dated 10/23/2016

Download

Tele2-Mini-1.1

Official Tele2 Mini 1.1 version V 01.01 of 11/17/2016 Update

Download

Tele2-Mini-1.1-Update

Official Tele2 Mini 1.1 version V 01.01 of 04/14/2017 New

Download

Tele2-Mini-1.1-New

SP Flash Tool Windows v5.1640.00.000

Download

SP_Flash_Tool_exe_Windows_v5.1640.00.000.zip(45 MB)

Post has been editeddenrusvrn - 12.01.18, 20:09

Reason for editing: Added to header

[barminov1976]

For Tele2 Mini 1.1

A source

Doogee X5 Max - Firmware

About firmware

The firmware is based on the stock from KingZone S2. Nimble, smooth. Eats little ram.

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card and the Phone memory.
Go to Install and select our archive

Download

https: //drive.google.c...NKU3M/view? usp = sharing

Thanks for testing and screenshots of denrusvrn



Post has been editedigor_nikitin - 22.09.17, 07:44

Reason for editing: In the header

[barminov1976]

For Tele2 Mini 1.1

About firmware

The firmware is based on the stock from TST. Beautiful, Nimble, smooth. Eats little RAM. Incoming flash call alert.

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card and the Phone memory.
Go to Install and select our archive

Download

https: //drive.google.c...laVzg/view? usp = sharing

Thanks for testing and screenshots of denrusvrn



Post has been editedigor_nikitin - 22.09.17, 07:44

[barminov1976]

ZopoColors C2

For Tele2 Mini 1.1

About firmware

The firmware is smart, without too much rubbish, sewn root and busybox.

Cons and bugs

I did not find if you write something

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card and the Phone memory.
Go to Install and select our archive with firmware.

Download

https: //drive.google.c...92QzQ/view? usp = sharing

Thanks for testing and screenshots of denrusvrn



Post has been editedigor_nikitin - 22.09.17, 07:44

Reason for editing: In the header

[denrusvrn]

XOS ChameleonV2

For Tele2 Mini 1.1

DESCRIPTION

Sewn root and busybox
Kernel with init.d and init.d.loop scripts support
Replaced the hosts hosts to block ads in applications, etc., etc.

MINUSES

Screenshots

Installation

Drop the zip-archive into the SD root, TWRP 3.0.3, expert-cleaning everything except the SD, then "Install" and select the archive with the firmware

Download

Download

Thank you so much for testing and screenshots spawn3080

Before installing the firmware, we MUST make a backup of our NVRAM through TWRP and preferably a full backup of the device!

The author is not responsible Do everything at your own peril and risk!

Post has been editedigor_nikitin - 23.09.17, 17:45

Reason for editing: In the header

[denrusvrn]

Unofficial Stock Firmware

for Tele2 Mini 1.1 under TWRP

from 11.11.2016

DESCRIPTION

Firmware with the latest update

INSTALLATION

Drop the zip archive into the SD root, TWRP 3.0.3, expert cleaning everything except the SD, then Install and select the archive with the firmware

CHANGES

3G is enabled on the second slot. All Tele2 applications are removed.

DOWNLOAD

DOWNLOAD

Before installing the firmware, we MUST make a backup of our NVRAM through TWRP and preferably a full backup of the device!

The author is not responsible Do everything at your own peril and risk!

Post has been editedigor_nikitin - 22.09.17, 07:45

Reason for editing: Corrections

[denrusvrn]

TEXET

For Tele2 Mini 1.1

About firmware

The firmware is smart. There is support for topics and much more.
Sewn root and busybox
Kernel with init.d and init.d.loop scripts support
Replaced the hosts hosts to block ads in applications, etc., etc.

Minuses

Incorrect display of the internal drive in Explorer instead of 4 displays 8 and incorrect display of the icon in the status bar displays 4G instead of 3G.

Screenshots

Installation

Drop the zip-archive into the SD root, TWRP 3.0.3, expert-cleaning everything except the SD, then "Install" and select the archive with the firmware

Download

TEXET_V1.0.4

Before installing the firmware, we MUST make a backup of our NVRAM through TWRP and preferably a full backup of the device!

The author is not responsible Do everything at your own peril and risk!

Post has been editedigor_nikitin - 22.09.17, 07:46

Reason for editing: In the header

[linaro]

Motor636 @ 03/27/17, 1:44

https://yadi.sk/d/0DLp5LYF3GNuD7

is ready

That is necessary. Here, try to flash this recovery.twrp_new.img(10.99 MB)
(for version v01.03)
The file will need to be renamed to recovery.img



Post has been editedigor_nikitin - 22.09.17, 07:46

Reason for editing: In the header

[linaro]

Motor636 @ 03/27/17, 16:35

And the script can not be made universal? for any models?

Unfortunately not(

Uptate:
I decided to add a calendar from MTK to the script for deletion. You can always put from Google from the playlist market if desired.Tele2MiniSystemLess-1.2.zip(180.55 KB)

Now removed additionally compared with version 1.1
/ system / app / MtkCalendar
/ system / app / CalendarImporter

Update2:
I noticed that the built-in music player (/ system / app / Music) crashes. I decided to add it to the script too. If someone still needs it, then use version 1.2.
Tele2MiniSystemLess-1.3.zip(180.55 KB)


Replacement player (he used this himself until he bought Poweramp):Walkman.apk(13.98 MB)




Post has been editedigor_nikitin - 22.09.17, 07:46

Reason for editing: cleaning post

[denrusvrn]

FOR

MINI 1.1

Description

The firmware is excellent in dark style
Launcher with cyanogenmod
Sewn SuperSU and Busybox and Dolby Atmos, Xposed Installer
Pre-installed applications are Link2SD, Greenify, Rootexplorer, SD Maid
Kernel with init.d and init.d.loop scripts support
Replaced the hosts hosts to block ads in applications, etc., etc.
Tweaks to build.prop

Minuses

Approximately 10% of 100% not translated into Russian

Screenshots

Installation

Drop the zip-archive into the SD root, TWRP 3.0.3, expert-cleaning everything except the SD, then "Install" and select the archive with the firmware

Download

REMIX M MINI 1.1

Before installing the firmware, we MUST make a backup of our NVRAM through TWRP and preferably a full backup of the device!

The author is not responsible for obtaining an inoperative device !!

You do everything at your own peril and risk !!!

Post has been editedigor_nikitin - 22.09.17, 07:46

Reason for editing: In the header

[linaro]

Instructions on how to make a full backup using SPFlashTool. Download the contents of the entire flash memory.

1) Loading stock firmware. Specifically, you need a scatter file, since it contains the markup and characteristics of the flash drive.

2) Switch to the Readback tab and set the Start Address fields (everywhere 0x0), Length, Region as in the screenshot, and in the File field where to save the backup.
BOOT1 0x0000000000200000
BOOT2 0x0000000000200000
USER 0x00000000e2000000
Before entering values, it is recommended to clear the value entry field completely.

3) Click the button "Read Back" and connect the phone

That's all)

Now the fun part. The USER.bin file will be a GPT markup disk image. You can safely unpack it with the 7z archiver and get ready-made images of the sections:

proinfo.img
nvram.img
protect1.img
protect2.img
seccfg.img
lk.img
boot.img
recovery.img
para.img
logo.img
expdb.img
frp.img
nvdata.img
metadata.img
oemkeystore.img
secro.img
keystore.img
system.img
cache.img
userdata.img
flashinfo.img

The bootloader (preloader) will be located in the BOOT1.bin file at offset 0x800
The partition table at offset 0x0 in the USER.bin file is 512KB in size (524288 bytes)
From these files, you can easily make firmware for SPFlashTool.



Post has been editedigor_nikitin - 22.09.17, 07:47

[linaro]

Motor636 @ 04/19/17, 12:12

Or wait until linaro will collect

Almost completed) I think I'll post it in the evening. There will be two at once for v01.01 and v01.03 from 20161117.
First and Second Revisions.
Update:
Firmware can be downloaded here.Tele2Mini_1.1_Firmwares
SPFlash_Tele2_Mini_1.1_V01.01.20161117.7z - for the hardware version V01.01>first revision
SPFlash_Tele2_Mini_1.1_V01.03.20161117.7z - for the hardware versionV01.03 >second revision

Before flashing, I recommend making a backup from the device (see instructions) just in case. Source - stock firmware from devices, no modifications have been made. You can unpack the firmware with the 7z archiver. Flash in Download mode. If SPFlashTool suddenly offers Format All + Download mode, then abandon the firmware and report it in this thread, specifying the release date of the model, which is under the device battery.

Post has been editedDimonn9 - 08.12.18, 21:56

Reason for editing: In the header

[denrusvrn]

Unofficial Stock FirmwareNEW

for Tele2 Mini 1.1 under TWRP

14.04.2017

Description

Official stock firmware remade for twrp.

Installation

Drop the zip-archive into the SD root, TWRP 3.0.3, expert-cleaning of everything except the SD, then Install and select the archive with the firmware.

Changes

3G is enabled on the second slot. All Tele2 applications are removed.

Download

Download

Before installing the firmware, we MUST make a backup of our NVRAM through TWRP and preferably a full backup of the device!

The author is not responsible Do everything at your own peril and risk!

Post has been editedigor_nikitin - 22.09.17, 07:48

Reason for editing: In the header

[barminov1976]

LineageOS 13

For Tele2 Mini 1.1

About firmware

The firmware is smart, smooth. Fixed the correct network display. FMRadio works

Cons and bugs

Not found

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card.
Go to Install and select our archive

Download

https: //drive.google.c...RRQQW8/view? usp = sharing

Gaps

open_gapps-arm-6.0-pico-20161230.zip(111.89 MB)

Gaps set immediately after the firmware is not overloaded into the system



Post has been editedigor_nikitin - 22.09.17, 07:48

Reason for editing: In the header

[barminov1976]

MoKee Open Sourse

For Tele2 Mini 1.1

About firmware

Excellent firmware
Productive, smooth, without lags and glitches.
Firmware with advanced settings
Correct network mapping fixed. FMRadio running

Cons and bugs

Not found

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card.
Go to Install and select our archive

Download

https: //drive.google.c...NleXM/view? usp = sharing

Gaps

open_gapps-arm-6.0-pico-20161230.zip(111.89 MB)

Gaps set immediately after the firmware is not overloaded into the system



Post has been editedigor_nikitin - 22.09.17, 07:48

Reason for editing: In the header

[barminov1976]

Cubot Note S

For Tele2 Mini 1.1

About firmware

The firmware is based on the flow from Cubot Note S. Nimble, smooth. Eats little ram.

Cons and bugs

I did not find if you write something

Screenshots

Installation

We throw the archive on the USB flash drive. We go to TWRP. We do all the wipes except the SD card.
Go to Install and select our archive with firmware.

Download

https: //drive.google.c...VLdmc/view? usp = sharing

Post has been editedigor_nikitin - 22.09.17, 07:49

Reason for editing: In the header