[X]Assistant

[Larry Ivanov]

ESCAM G02
[ip camera] 720p, P / T, Wi-Fi camera with IR illumination for ~ $ 25.
Official site | Discussion пїЅ

A photo

Device photos

Device description

Wi-Fi camera Escam G02 720P P2P WiFi IP Camera is perfect for use, both at home and in the office. The camera is equipped with 10 infrared LEDs that provide illumination at a distance of 8 meters, a motion sensor and other useful functions. The pivoting design of the video surveillance camera allows you to control a wide range in the horizontal and vertical direction using the APP control element.

Device characteristics

System:

• Operating system: Linux OS
  
• Processor: GK7102
  
• Sensor: 1/4 720p CMOS

Video:

• Compression Format: H.264
  
• Video encoding: 1280 * 720 @ 25fps; 640 * 352 @ 25fps, 320 * 176 @ 25fps
  
• Image adjustment: contrast, brightness, clarity, reflection and rotation of the picture
  
• Minimum illumination: 0.8 lux / F1.4 (color mode), 0.4 lux / F1.4 (black and white mode)
  
• Data transfer rate: CBR / VBR, 32-6144kbps
  
• OSD: supported
  
• Lenses: 3.6 mm

Night vision: in the presence of 10 pcs of LEDs, lighting at a distance of 8 meters

Audio:

• Compression Format: G.711A
  
• Input: built-in microphone
  
• Output: built-in speaker

P / T function: turn: 355 В°, tilt: 120 В°

Network settings:

• Protocol: TCP / IP, HTTP, SMTP, FTP, DHCP, DDNS, NTP, UPnP, RTSP, RTMP, etc.
  
• Online users: up to 5 online users are supported simultaneously.
  
• IP address: dynamic IP address and static IP address
  
• WIFI options: WIFI 802.11 b / g / n
  
• Onvif: Onvif protocol supported

Signaling:

• Motion detection: 4 independent zones supported (sensitivity 1-100)
  
• Alarm type: send image to email, save image or video on TF card

Other features:

• Memory: Supports TF card with a maximum capacity of 128 GB
  
• Permissible application environment: indoors
  
• Voltage: DC5 В± 0.3V
  
• Temperature: -10 ~ 50 В° C
  
• Humidity: 10 ~ 95% RH
  
• Power Consumption: 3.5W

Compatibility with operating systems: Windows XP / 7/8/10; IOS and Android

Equipment:

• 1 x ESCAM G02 dual antenna IP camera
  
• 1 x European power adapter
  
• 1 x USB cable
  
• 1 x instructions for use
  
• 1 x mount
  
• 1 x screw

Additional Information

CamHI app on Google Play
CamHI App on the App Store
PC CMS client

G02 Software
About audio problem of G02

Review
ESCAM G02
Web setup
App Setup, Firmware update
MaxOf overview

Purchase

ESCAM Official Store - Aliexpress
Banggood
Gearbest

FAQ & Help

RTSP camera streams
RTSP camera streams 2
Password on RTSP camera streams
Convert files from .264 to .avi from card
Record on the SD card in the resolution of 1280 * 720
Setting up mail on the example of gmail.com
Setting up tinycam under ESCAM (although all the settings are already clear (ip address and ESCAM ports of the camera))
The program for updating the firmware and the firmware itself Escam G02

• Before posting read the message Video section rules
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedRu4kin - 04.07.18, 13:42

Reason for editing: standardized section

[Larry Ivanov]

Guys, help out! My G02 has come, and does not want to connect via WiFi

I do everything according to the instructions (power, reset, add camera. I enter the wifi password, the sound goes, but it reaches 100 and no reaction) can the march settings be needed?

I managed to connect via cable, and then just throw in the WiFi password. In IE, it does not show a picture (it seems to have installed what was requested), in Firefox it shows a picture, but there is no sidebar.

Gentlemen, how to set up alarms on google mail?
Why is the video recorded on the card 640 * 352 16fps, where 1280 * 720?

Post has been editedLarry Ivanov - 27.07.17, 20:49

[ISR]

Larry Ivanov @ 07/27/17, 13:52

I enter the password from wifi, the sound goes

The phone should be next to the camera (I think within 0.5 m) with the volume turned on at all - only then they will start to “negotiate” the sound with the camera, like old modems.

Larry Ivanov @ 07/27/17, 13:52

Firefox shows a picture, but there is no sidebar.

The work of these plugins is guaranteed ONLY in IE, I don’t know the details, but the Chinese emphasize this moment for all the cameras.

Larry Ivanov @ 07/27/17, 13:52

Gentlemen, how to set up alarms on google mail?

Larry Ivanov @ 07/27/17, 13:52

Why is the video recorded on the card 640 * 352 16fps, where 1280 * 720?

I don’t know exactly with the streams, I think the first one is displayed online, and the second one is written in SD. Although there may be options. If, as I said, then you can customize them - as I understand it, quality 1 is higher, and it probably depends on the bitrate.
Some kind of damn ambush, the resolution of the first stream does not change, and the second one is only 2 options: 640x352 and 320x176.

Post has been editedISR - 27.07.17, 22:15

[Larry Ivanov]

ISRso everything is around 40 cm (camera — tablet — march) on one table. Everything is connected via cable

[ISR]

Larry Ivanov @ 07/27/17, 10:22

so everything is around 40 cm

Does the tablet make any sounds? Is the volume sufficient? The tablet should emit tonal sounds - data transmission by tone signals.

[Larry Ivanov]

ISR @ 07/27/17, 10:30 PM

Does the tablet make any sounds? Is the volume sufficient?

makes sounds, well, I think that if a smartphone makes tonal sounds, then the tablet is the same, it will also sound

[ISR]

Larry Ivanov @ 07/27/17, 10:40 PM

makes sounds, well, I think that if a smartphone makes tonal sounds, then the tablet is the same, it will also sound

Yes, I also think that there is no difference tablet or smartphone. Then I do not even know, I have all 4 cameras connected without problems. Sometimes the same did not work, but I just forgot to turn on the sound on the phone, because almost always he stands on my vibra.
Okay, I left today.

Post has been editedISR - 27.07.17, 22:48

[Larry Ivanov]

ISR,
And when you stood on the vibro, there was no sound from the phone? And at the time of setting, the camera, after it rotates, makes sound clicks, and then a short tune, a blinking green diode?

[ISR]

Larry Ivanov @ 07/27/17, 10:52 PM

And when you stood on the vibro, there was no sound from the phone? And at the time of setting, the camera, after it rotates, makes sound clicks, and then a short tune, a blinking green diode?

Yes, there was no sound from the phone, maybe not because the vibra, or maybe just the volume of multimedia was at 0, the slider reached 100% and everything - nothing was found.
It seems so, then she repeats this melody to connect with the phone, after which VERY loudly loses a piece of another melody such as TA-DA or some kind of overflow, then the slider reaches 100% and everything is located. Maybe try with the phone?

[Larry Ivanov]

ISR, and on the march, the wifi settings are the same (11bgn mode mixed, channel width — auto, channel — auto). The CamHi application itself was installed from the market, or from the Escam website
Everything, now CamHi is not connected to the camera and through a cable. : angry: I did not expect.
ISR, maybe on the march you need to forward ports?

Post has been editedLarry Ivanov - 28.07.17, 10:24

[ISR]

Larry Ivanov,
The router did not touch at all, I do not think that its settings should be adjusted to the camera.
CamHi seemed to install from the market, they did not install anything special from the site.
It is not necessary to forward ports for sure, it is only for access from the external network to the rtsp-stream. On the internal network, this is completely unnecessary. I do not have access from the outside, even if I forward ports - because "gray" IP.

[Larry Ivanov]

ISR,
The problem was solved, the CamHi application worked. I had a jackdaw in the P2P section in the OFF position, set it to ON and it all worked!

But for some reason in IE does not show a picture (installed ClientPlus_Setup.exe, well, no reactions whatsoever). Therefore, I wonder how to set up motion detection
I choose window 1 to set the sensitivity and there I understand it is necessary to select the area of ​​detection. How to choose it if there is no picture.

Interested in the same sections
* Auto snap Save Picture on the SD Card
* Multiple settings
* Video shade
What do they allow to do, what to fix?
To record video in 1280 * 720 25fps resolution, select the advanced = section>timer record =>stream =>first stream. There is a record that is set in the section Media =>first stream

Post has been editedLarry Ivanov - 28.07.17, 19:44

[ISR]

Larry Ivanov @ 07/28/17, 19:37

in the P2P section there was a jackdaw in the OFF position

Well, who knows that someone can fly off - well, the main thing was decided.

Larry Ivanov @ 07/28/17, 19:37

But for some reason in IE does not show the picture

I have a picture and all 4 motion detection windows are configured. Probably you need to get a picture, maybe the plug-in for IE got crooked or the computer restarted, I don’t even know - I'm ok.

Larry Ivanov @ 07/28/17, 19:37

* Auto snap Save Picture on the SD Card

I will automatically make screenshots once a minute or how much is set.

Larry Ivanov @ 07/28/17, 19:37

* Multiple settings

It did not penetrate, it is possible to combine several cameras with the same settings, so as not to twist each one — one set up, and the rest will pick up — but this is just my guesswork.

Larry Ivanov @ 07/28/17, 19:37

* Video shade

I also didn’t understand what it is, there again the same 4 windows as in the motion detector, but I translated - the shade shield, i.e. Perhaps areas for closure and monitoring, so that the camera does not remove something not needed, but again, my guesses.
By the way, IE often crashes when entering the motion detection and video shade settings. And to change the size of these 4 windows is VERY difficult - barely caught a corner - then it seemed to expand.
But once again I say I do not use these options - it is stupidly permanently writing to SD for now.

Post has been editedISR - 28.07.17, 19:59

[Larry Ivanov]

ISR,and what you have installed in IE? I have Win10 64 bit, IE 11.483.15063.0, installed:

NameWebClient Control
Publisher Unavailable
Status Enabled
32-bit architecture

NameWebClientPlayBack Control
Publisher (Unverified) www.xjghost.com
Status Enabled
32-bit architecture

NameShockwave activex control
Publisher Adobe Systems Incorporated
Status Enabled
32-bit architecture

NameShockwave flash object
Microsoft Windows Third Party Application Component Publisher
Status Enabled
32-bit and 64-bit architecture

ActiveX settings - enabled or suggested. Despite this, IE does not want to show a picture from the camera in any way!

Post has been editedLarry Ivanov - 30.07.17, 16:45

[ISR]

Larry Ivanov,
On the main PC I’m sitting on Win7, but now I’ve checked it on my MiniPC on Win'10 64b - it also shows everything, I didn’t climb into the IE settings at all:
IE version 11.576.14393.0, Security level - medium. There in the security settings (the Other button) a bunch of settings about ActiveX, maybe there is something twisted - I did not touch anything there.

[Larry Ivanov]

ISR, but as a picture from the camera, I have something the left side of the frame is blurred

[ISR]

Larry Ivanov @ 07/31/17, 09:47

as a picture from the camera, I have something left side of the frame is blurred

The picture is less, like the same as the others. Focus is adjusted by turning the lens. A little to the side and floated the picture, but if it floats, it seems like the whole, and not in parts. Possible marriage, or some speck of dust. And maybe something else, China all the same, and cheap. Of course, the picture is not super clear, but then the resolution is 1280x720 max. Now the cameras with 2MP are starting to gain momentum (become cheaper) - there naturally it will be better, but the volume of cards for recording will also need to be increased and the width of the Internet channel.

Post has been editedISR - 31.07.17, 17:45

[Larry Ivanov]

ISR,look, these photos match the quality of your camera

I think the left side of the picture is blurred

[normex]

Can you please tell me if this is not an analogue of this camera? The location of the antennas is confusing. Well, for this more feedback would be desirable.
I have a T10 proce, Kerway 720p died a day later, I went to the next topic - it turns out there through one such

Post has been editednormex - 15.08.17, 06:31

[ISR]

normex @ 02.08.17, 11:08

look, these photos match the quality of your camera

It's hard to say, just attach my photo:

normex @ 02.08.17, 11:08

not an analogue of this camera?

It seems not, the head seems to be similar, and the antennas in G02 are spaced apart at different angles, but here it seems to be near.
According to reviews, it seems to work stably, at least for now. Now the heat is 30 degrees - do not seem to be buggy. I use 4 cameras for about a month, they write around the clock on SD, I do not use motion and sound detection. The quality of the picture may not suit everyone. At night, people can not figure out the course.

Larry Ivanov @ 07/28/17, 19:37

To record video in 1280 * 720 25fps resolution, select the advanced = section>timer record =>stream =>first stream. There is a record that is set in the section Media =>first stream

Does the CamHi image deteriorate? Just in Sricam, when switching to high-quality stream (HD) for recording on SD, switching to a bad stream (SD) and back in the application already HD (i.e. 1st stream) no longer look.

[Larry Ivanov]

ISR @ 2.08.17, 14:29

Does the CamHi image deteriorate?

I think not, I understand that in the application the settings are set to max (this will be the corporate stream, and the low settings will be the second stream). And what quality do you have? I have 1 everywhere on streams

Post has been editedLarry Ivanov - 02.08.17, 14:38