TP-Link TL-WR845N - Discussion | [wifirouter] Wi-Fi Router: 11n: Up to 300 Mbps
If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks.
AlexC1 , AlexC1 , downloaded virtualka and launched. After updating all the scripts itp launched the build. I chose the manufacturer TP LINK (25 in my opinion), the model wr845n v4 and it went to compile. I pulled the file from the virtual image. Then this bin is needed in the hex editor to obkotsat and remove from 0x00 to 0x200 part. After save and upload via tftp Post has been editedVitality-007 - 29.05.19, 11:34
safanda3 , I can. A man asked me how I shared my experience. If necessary, I can’t get rid of Posted 05/29/2019 11:33 AM:
AlexC1 if you have wr845n v4 then I can throw Vitality-007, I have a model wr845n v1 now is firmware 3.16.9 build 15.12.29 rev. 72829n.
If the firmware from your wr845n v4 model is suitable, then I will be very grateful to you for the firmware already assembled. Thank you in advance!
safanda3, And I, however, to give the hungry not a fish, but a fishing rod!
Posted 05/29/2019 12:04:
AlexC1 @ 05.29.19, 14:03
If suitable firmware from your model wr845n v4
Hello! People help the wretched to solve the problem. I bought this device TL-WR845N v4 00000004, software version 0.9.1 3.16 v0283.0 Build 1806 19 Rel. 56190n
Connected set up everything according to the instructions, everything worked perfectly. About a week later, the range of the signal was greatly reduced. Initially I finished on the second floor of the house "I have a private house the device is located on the first floor" in the room 2 floors far from the device, about 75-80 %% of the signal power and now you will go 5 meters to the next room and the signal drops less than 40-50 %% not to mention the second floor there is no WiFi network at all
Connected set up everything according to the instructions, everything worked perfectly. About a week later, the range of the signal was greatly reduced. Initially I finished on the second floor of the house "I have a private house the device is located on the first floor" in the room 2 floors far from the device, about 75-80 %% of the signal power and now you will go 5 meters to the next room and the signal drops less than 40-50 %% not to mention the second floor there is no WiFi network at all
 |
 |
I wanted to play with OpenVPN here, Padawan is desperately not going to OpenVPN and the compilation error ends. Has anyone tried OpenWRT to build under WR845N v4? He has mediatek 7628, right? OpenWRT if you pour from wr841n-v13 or will there be a brick?
Vitality-007 @ 05.29.19, 11:32
if you have wr845n v4 then I can throw
Is it possible to post here the padavan firmware file and the recovery file? And then in the cap indicate? I tried to collect in my linux mint 19, I do not want to work there prometheus. And to put other systems, incl. virtual, well, just does not make sense, especially if there is a working version. By the way, in the padavan firmware there is a limit for 15 users?
Parus2017 , about 15 users did not hear. The recovery firmware is the firmware from the router of your model and revision which has a piece from 00000000 to 00000200 cut out of the .bin file. I downloaded the ready virtual machine with a promet. I can throw off the firmware, but on condition that you also have wr845n v4 and I (his Padawan) sewed it from the router's interface. I will not post here, I can drop it on the mail.Vitality-007 @ 06/18/19, 10:03
Provided that you also have wr845n v4 and I (it is Padawan) sewed it from the interface of the router
Yes, I have this version. if it doesn’t make much trouble, then on the parus.bit box, zhmeyl.com. And I read about 15 users here, and I felt it myself ..
Post has been editedParus2017 - 18.06.19, 14:04
Vitality-007, for their efforts in sending +.) But I did not get to use.
"Error code: 4503 The downloaded file is not suitable for this device."
Originally worth TL-WR845Nv4_RU_0.9.1_3.16_up_boot [180619-rel56190] and the like is locked. Even in TL-WR845Nv4_UN_0.9.1_3.16_up_boot [180319-rel67391] complains as well as on Padawan. Maybe because the router model specified TL-WR845N (RU) v4? Decision has yet been found ...
Parus2017 I have it so. I initially screwed and embedded firmware that's the English. Cut off her 0h000 of 0x200, has retained binary. I filled for tftp, router alive. Then he fed him Padawan. Why is your gags xs, well, looking at the title above version of rubble. We must ask the curators ride if padawan cut with 0h000 on 0x200 and pour on the tftp Vitality-007, The firmware on anything it is not necessary to cut Padavan'a, and it is necessary to add file 128kb in early firmware and sew on tftp.
Parus2017, https: //forum.tp-linkr.../viewtopic.php t = 10015?
Or, you moved onto firmware for your region.
Post has been editedvovan26_ - 23.06.19, 13:23
vovan26_ @ 23.06.19, 09:32
Or, you moved onto firmware for your region.
I have not rolled, I bought it with this firmware in the store. And along the way to of.sayte ru region is unique. Angl.sayta downloaded from the above-not gone as padawan. And it is not including on the tftp, but it is probably necessary to add zeros at the beginning.
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement