link replaced

With Ruth, no one came? to clean the internal memory of the software ...

Greetings to all!
Prompt pliiiz, this unit can somehow increase the volume of the speakers or headphones? And then you go in public transport, you can not hear anything. ((
Thank you in advance. :)

Some codes for a set of dialer:

* # 06 # - imei
* # 8828 # - station info
* # 9980 # * # 37 * # - factory test

* # 9981 # - eng. mode

* # 9982 # * # * # 888 # * # - real software info
* # 9988 # - hardware info

Post has been editedhalfaxle - 22.08.17, 13:44

Try through the engineering menu (the code in the previous letter). As if you can do it, but did not check.
And if there is a solid understanding of what you are doing, then I would highly recommend to check out the pre-something on the topic of increasing the volume through the engineering menu.

Thank! :)

shurick-jan, If we manage to solve the problem, unsubscribe here. Suddenly, someone else will come in handy.

Hello!
I changed the sound from the engineering menu. In general, not difficult, but!
There are sections:
Normal Mode (nothing is happening). I have different sub - nothing.
Headset Mode (too personal)
LoudSpeaker (in this section, I will regulate the headphone volume with only subsection Max.VOl.) Automatically increased sound and external speakers for calls
Headset_Loudspeaker (too personal) values ​​changed, but the sound has not changed.
which is characteristic of each section there is Value is 0-255 line. It corresponds to Level 0-14 (depending on the section). but as I have changed, save, re-entering the section - was always 0 and Level Value is stand.znachenie.

Xs. how to save it.

Post has been editedshurick-jan - 25.08.17, 22:07

The idea is that for a given mode, level - "volume" which we switch up / down buttons. For each of the "Volume" you can set the "value" - value, which will determine how much the phone will sound loudly at the volume level selected in this mode.

That is, for example, for levels 0 to 14 can be made more or less linear volume increment from 0 to 255. In this case, the step is about 18: level 0 - value 0, level 1 - value 18, level 2 - value 36 ... level 14 - value 255.

Or, conversely, it can be non-linear adjustment with a different increment value for a different level. Thus it is possible to compensate for "nonlinear" hardware in order to achieve a uniform increase in ear volume.

Max Vol - Something like "main" volume control for the selected mode. In proportion to the volume of the sound changes once for all level.

Ruth could anyone get it?

Removal FRP (google account request) via Flashtool.

1) open a scatter-file
2) Run the SP Flash Tool, go to Formatting tab, note the item Manual Format Flash
3) Begin address [HEX] 0x4FA0000
Format Lenght [HEX] 0x100000
4) presses Start the program and connect your device to the PC off.
Waiting for completion of the formatting process is 5 seconds


MT6580_Android_scatter.rar(1.06 KB)

It is suitable for a41 scatter?

Worth buying this device for World of Tanks blitz? Or at least Clash Royale?

Probably not. By today's standards, the only "game" component in this phone - it's battery.

djhim
Good day. file does not work. you he was? not open Rahr.

winrar 5.4

djhim
thank)

Help me find the firmware on your phone haier a41. I understand that is not on

agressor338,
Haier A41 - Discussion (Post Lex1981 # 68502255)

this device zhutchayshy brake. Even when you answer the call hang about 5 seconds, which is much less tanks ... vpominat old tekset with 512 operatives on board and pulling GTA VC without lags. Sobsna question craftsmen did not make port 4th android for this Haier?