[X]Assistant

[VovkaPIG]

DJI Phantom 3

• In the subject are allForum Rules | Section Rules;
  
• Useful topics to note:Forum FAQ | How to clean the image under the spoiler;
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where you were helped, and write thanks;
  
• In the absence of the curator, the moderator fills the topic header. Use the buttonon the message, which, in your opinion, you need to add to the header to contact the moderator.
  

Device photos

Device description

Phantom 3 is a new generation of DJI copters. It is capable of recording video at a resolution of 1080p and transmit HD video. The built-in camera is equipped with a suspension that increases the stability of the shooting and at the same time reduces the weight and size of the structure. Even in the absence of a GPS signal, the optical positioning system allows you to accurately hold the position of the copter.

Device characteristics

Specifications

Copter

Weight (Including battery): 1280 g
Hanging accuracy (GPS-Mode): vertically - 0.1 m, horizontally - 1 m
Maximum lifting speed: 5 m / s
Maximum speed of descent: 3 m / s
Maximum speed: 16 m / s
Maximum flight height: 6000 m
Maximum flight time: about 23 minutes
Operating temperature range: 0 В° to 40 В° C

Camera

Sensor: 1 / 2.3 "
Working Resolution: 12.4 megapixels
The maximum image size is 4000x3000
ISO range: 100-3200
FOV (Field of View): 94 В°
Lens: f / 2,8 (analog of 20 mm)
9 elements in 9 groups
Video recording mode: UHD: 4096x2160p 24/25, 3840x2160p 24/25/30, FHD: 1920x1080p 24/25/30/48/50/60, HD: 1280x720p 24/25/30/48/50/60
Data transfer rate for video storage: 60 Mbps
Photo formats: JPEG, DNG
Video Formats: MP4 / MOV (MPEG-4 AVC / H.264)
Memory Cards: Micro SD SD / SDHC / SDXC max. 64 GB capacity, speed class 10 or higher

Mobile device system requirements: iOS version 8 and above / Android version 4.1.2 and above.

Platform Compatibility

Android, iOS

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedmihadom - 28.05.18, 08:50

[VovkaPIG]

Friends! On such a respected forum there is still no topic on one of the most popular quadcopter models. I agree that there are specialized thematic forums, but I think there are also a lot of fans of this “toy” here.
Communication in other forums is more like a monologue. Questions often go into the void. Knowing the friendliness and responsiveness of the participants in our forum, I hope many quadcopter drivers will find here a solution to their problems.
Therefore, do not hesitate to ask questions.

Post has been editedVovkaPIG - 11.06.17, 15:48

[kazyrnet]

The main problem of the Phantom 3 Standart is the small radius of flight (100 m) on the latest firmware. In older devices, you can roll it back. Mine was bought recently and did not work. So I fly, even though the manufacturer claims 500 m. Maybe someone solved the problem?

[Ilguit]

kazyrnet,What version of firmware is it worth?

[Basil406]

kazyrnetradius or height? If the altitude then this is changed in the settings, and the flight distance from the standard is kilometer.

[mister syslik]

kazyrnetWhat is the firmware version?

[tukpert]

Hello! Phantom 3 pro stopped connecting to the console after an unsuccessful takeoff. The fall was not serious, only 2 blades broke. I tried to reinstall the firmware on the drone, but at some point it starts to squeak constantly. What can be done in this situation? Is there any phantom block after a fall?

[lieutenant]

tukpert
After physical impact, it makes sense to look for its consequences, and not try to cure it with firmware, open the drone and check that all the connectors are in place, that nothing is torn off or broken off, see the cracks on the board.
It is unlikely, but perhaps a simple coincidence with your crash and electronics failure, but even here the console can refuse not only the drone

[kraichik]

My son is 3 standard, after the fall, too, the connection with the console was lost, it seems that a red light was burning, instead of green. There is a hole on the drone, for reset, they held it for 5 seconds with a toothpick, the connection was restored.

[lieutenant]

Kraichik @ 05.13.18, 21:26

hole to reset

there is a toilet, and the copter has a button to bind to the console, and it is not clear that your son fell ?, I hope everything is all right with him?

[kraichik]

tukpert, lieutenant, Do not worry about us, you are our diploma. Only the word PORUCHIK without T is written.

[lieutenant]

Let the word be spelled, and the lieutenant is NICK, and according to the rules of the forum, and not the Russian language, NICK can be a set of any letters, numbers, and so forth.
When you start your forum, you can make it obligatory there to choose a NICK only from Russian words, according to all the rules of the Russian language, and on 4 pda, as on many other resources, I have the right to use any letter combination. : P

[knfevg]

He got out of the closet unleavened, and bought P3S 2 years ago. The latest firmware 1.9.20 was delivered. As soon as the copter flies meters to 40-50, the control signal disappears (video goes). What to do?

[kraichik]

[snapback] 73431061 [/ SNA knfevg, knfevgIn the settings "tick" uncheck.

[zheca]

Also higher than 100 meters in height does not fly; the latest firmware v01.09.0200 rolls back to others backwards serovno above 100 does not fly

[nikolafair]

hello pilots question one did roll back firmware 1.11.0020 to 1.10.0090 and further to 1.08.0080 I want to return 1.090060 but the kopter is not stitching and hangs in the program firmware 1.1.9+ what can I do or where can I read about it?

[Sophit]

Hello! Help the council, after the next shutdown and on, the network SSID stopped broadcasting. I tried to reset - nothing changes. At the same time the camera reacts to the wheel. According to the advice - he spun the console, pressed the plugs - nothing helps. What to do?

[vovlip74]

Hi, I rolled back with an empty file and the necessary firmware. I have Dji fantom 3 professional. It is stitched easily, there was a firmware at the time of purchase of the copter 1.10.90, updated to the latest 1.11.20. I did not like it because of the height limit (30 meters), although the student mode was turned off.

[romster]

Hello everyone, tell the P3P copter, GL300A remote control question: not including the copter, you can connect the smart to the remote and find out the remote's firmware, does the smart even connect to the remote without a quadcopter?

[lieutenant]

romster,And what's stopping you from trying?

[romster]

in the morning there is not much time ... I will describe the adventures, once I bought a copter, but not simple, but ... P3P and almost not working :) :) who took the mortgage, they will understand me ...

The Lieutenant @ 08/15/18, 17:36

Romster, And what prevents you from trying?

Of course, I try, but nothing comes out, there is a suspicion that I cannot come out for a number of reasons, I just would like to know about the moment: will the smartphone connect to the console without the copter turned on?

history: P3P 2015, turns on, flies, is controlled only from the remote to the blind, which I consider is not acceptable for a kopter of this class. the last owner said that he stopped connecting to the smart, and everything works. and there is

treatment: attempts to flash the copter always ended with a DDDD error ... in the logs there are references to the absence of 08 00 and 15 00 devices apparently bad blocks are to blame, it means the DM368 chip has loaded the bootloader, the firmware on the copter is up, great. the smartphone still didn’t connect to the console ... but the GL300A turned out to be the same rake with the bootloader killed, the console’s boot logs showed it ... the bootloader was flashed, now something else is in the log)

So I am looking for a smartphone to check whether the console has earned or not, but in order not to carry along with the copter, I also want to know:Is it possible to connect a smartphone to the Phantom 3 pro console without a copter?

Comrades, who are not difficult, well, you check this opportunity, the smartphone connects to the console without a copter, the console data will be visible, at least that thread, charge level or something else.

Post has been editedromster - 16.08.18, 08:40