607 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Mini M8S PRO / PRO-C TV Box / COOLEME® MB3 [Android] | [TV Box] [Amlogic S912]
S-M-O-K-I
Message#1
10.06.17, 00:11
Local
*****
[online]

Group: Friendssavagemessiahzine.com
Messages 353
Check in: 31.03.10
Samsung Galaxy S8 Plus Exynos

Reputation:-  120  +

DiscussionMini M8S PRO / PRO-C / COOLEME® MB3
Picture[Android 6 | 7.1] [Amlogic S912] [Mali-T820MP3] [5G WiFi] [Bluetooth 4.0]
Discussion | Purchase | PictureFAQ



Differences between Pro and Pro-C versions

Specifications
Model: Mini M8S PRO / PRO-C
Type: TV set-top box
System: Android 6 | 7.1
Processor: Amlogic S912
Kernels: 8 x Cortex A53
GPU: ARM Mali-T820MP3
RAM: 2G
Type of RAM: DDR3 / DDR4
ROM: 32G
Maximum. Extended TF card capacity: 32G
5G WiFi: yes
Bluetooth: Bluetooth4.0
Interface: Power Port, HDMI, RJ45, SPDIF, TF card, USB2.0
WiFi Antenna: internal
HDMI Version: 2.0
Other features: DLNA, ISO files, Miracast
Supported external subtitle: Yes
HDMI function: CEC
Power Consumption: 6 W
RJ45 port speed: 1000M / 100M for PRO-C

Media support
Decoder Format: H.263, H.264, H.265, HD MPEG4
Video Format: 4K, AVI, DAT, ISO, MKV, MP4, MPEG, RM, WMV
Audio Format: AAC, DTS, FLAC, MP3, OGG, RM, TrueHD, WMA
Photo format: BMP, GIF, JPEG, JPG, PNG, TIFF
5.1 Surround Sound Output Support: Yes

A photo
PRO boards
Attached Image
Attached Image


PRO-C boards

Attached Image
Attached Image
Attached Image
Attached Image


Instructions and useful
Firmware
Mini M8S PRO-C


Bug in all firmware with audio playback on optics

Mini M8S PRO
AlexElec and CoreElec
Cooling
Accessories (cables, power supplies, etc.)
Reviews
Polls
Attached Image


Attached Image


Attached Image


For filling caps tovelikashkin


Post has been editedvelikashkin - 01.04.19, 13:56
Reason for editing: Ugoos 2.1.7 based firmware for PRO and PRO-C
Celt30
Message#22
19.07.17, 22:59
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

yurisavagemessiahzine.com @ 19.07.17, 18:51 *
Only the remote control file is replaced after installation.
Hello Yuri! That's what I have a problem with. I've reviewed your posts in the last few months. Earlier you wrote that in order for the native console from the console to include it (the console), you need to flash the native bootloader. To do this, respectively, you need to make a firmware dump, and pull it out. I am ashamed to admit, but I do not know how to do this. The night of searching for information did not give any result. Does this seem to be done with the help of a terminal for dumping, and "Customizer" for parsing? I would be very grateful if you indicated the direction of the search. In any case, the dump would be useful, so that people would have the opportunity to choose (for example, roll back to stock, if the UGOOS did not correct the problem with the “new” Eden channels. After all, Android 7.1 should come, but in it, I understand from your words this is all right).


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
sokkol
Message#23
19.07.17, 23:05
Novice
***
[offline]

Group: Active users
Messages 40
Check in: 14.09.10
Samsung Galaxy Note 2 GT-N7100

Reputation:-  10  +

A person who is not well versed in the guts of TV boxes, it is difficult to understand what is being said when they say the names of various adapters and so on. As I understand it, for hardware and software compatibility (firmware) in a TV set-top box
should have Wi-Fi chip like Ugoos AM3 - QCA9377 / LTM8830. The reviews on the Mini M8S PRO and the like mention both the QCA9377 and the AP6335 chip. And on the Beelink site, the firmware is marked with either AP6335 or QCA9377.
Those. Before flashing the box, you need to know which chip is in it, otherwise it is guaranteed that we get idle Wi-Fi / BT? It seems clear. And what is the file of the console (probably in the native prosh) and where to look for it, do not tell me, be caress?
yurisavagemessiahzine.com
Message#24
19.07.17, 23:27
Not guru
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 6069
Check in: 09.06.10

Reputation:-  2514  +

Celt30 @ 07/19/17, 10:59 PM*
That's what I have a problem with.


Here you need to clearly determine whether you even need the function of enabling boxing? Turning it on from the off state (when you forcibly turned off the box; when the power cable is connected, the box starts automatically), and not waking up from sleep. This feature, which people very rarely use.

If not needed, then the following options are possible:

- You will use the remote with a USB-receiver. Those. replace the regular IR remote control with any remote control with a USB receiver (from $ 2) - there are many pros, no cons. In this case, you do not need to change anything in the system. Everything will work, waking from sleep too.

- You will use the remote from the TV (you have it very convenient) for HDMI CEC. In this case, you do not need to change anything in the system. Everything will work, waking up from sleep too (when you turn on the TV).

- You like the standard IR remote so much that you are not going to refuse it. Simply replace the /system/etc/remote.conf file from the original box. Everything will work, waking from sleep too.

If you need the ability to turn on from the IR remote and life without it is impossible:

- You need the original firmware of your box (img). Parse it with the help of the AMLogic Customization Tool program - there are literally a few mouse clicks. Keep the files /level1/bootloader.PARTITION and /level2/system/etc/remote.conf. You disassemble the Ugoos firmware in the same way, replace the bootloader.PARTITION file and remote.conf, collect the firmware back. Done, you can flash.

- If the original img image is not available, then the bootloader can always be removed from the working device. But this is an extreme case, because You can always get the firmware even from the seller, you do not need to do a firmware dump yourself.

Post has been editedyurisavagemessiahzine.com - 19.07.17, 23:40


--------------------
NCR - New Digital Releasesfor Android TV | High-quality movie releases in the last 60 days
yurisavagemessiahzine.com
Message#25
19.07.17, 23:32
Not guru
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 6069
Check in: 09.06.10

Reputation:-  2514  +

And what is the file of the console (probably in the native prosh) and where to look for it, do not tell me, be caress?


The file /system/etc/remote.conf. It spelled out the correspondence codes specific console. Additionally, in the bootloader section of the firmware, the activation code is registered from the IR remote.

Those. Before flashing the box, you need to know which chip is in it, otherwise it is guaranteed that we get idle Wi-Fi / BT?


That's right. If Ampack, then Wi-Fi and BT will not work. If Qualcomm, then everything will work. With a special desire, replacing one daddy and one file, you can bring BT back to life. At the same time, the core of the Ugoos system will not be affected and everything will function perfectly. This is when you do not need Wi-Fi, a cable connection.

Moreover, if you have a box with 3 GB, and you flash it with firmware from 2 GB (not universal), then in most cases the box will not even turn on. This is due to the fact that different platforms are registered in the DTB table. Corrected too easy.

Post has been editedyurisavagemessiahzine.com - 19.07.17, 23:39


--------------------
NCR - New Digital Releasesfor Android TV | High-quality movie releases in the last 60 days
Celt30
Message#26
20.07.17, 01:45
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

yurisavagemessiahzine.com @ 19.07.17, 22:27 *
Here you need to clearly determine whether you even need the function of enabling boxing?
Thanks for the answer! The fact of the matter is that I need (personally to me). There are several reasons for this: 1. There is no confidence in an uncertified power supply unit, and there is no certainty that this box is designed to work in 24/7/365 mode. 2. I need the USB ports to be de-energized, otherwise the spindle on the external screw will rotate in the same mode, and it will not live long (it works for me without additional power). 3. I want to put a pin code or password to enter. Shket grows up, and he climbs everything on and dig in everything. And even if he doesn’t get to the Eden playlist (porn channels that can be removed, I don’t watch them), then every time he is guaranteed to take down all the settings, he has a gift for it.
I don’t like my own remote control. The difference in price (with Beelink GT1), I ordered the Aeromysh, will come with a prefix. And the power to juggle every time is not an option; the tilvizer is in a niche, a prefix is ​​behind it, to access it every time you move the bandura ... So I will try to unwind the "saleswoman" to the firmware image.
Thanks again!


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
iamshaman
Message#27
01.08.17, 06:47
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 77
Check in: 01.07.12

Reputation:-  0  +

* Celt30,
Celt30 @ 07.20.17, 04:45*
So, I will try to unleash the "saleswoman" on the image of the firmware.

good day.
Now I’m thinking about flashing firmware from ugoos, as I’m not satisfied with the playmarket crashes, but I’ll do it for the first time, as I didn’t have experience with boxes, and I don’t know how to dump the original firmware either.
Did you manage to find the firmware image?

Post has been editediamshaman - 01.08.17, 06:50
Celt30
Message#28
01.08.17, 11:48
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

* iamshamanPlease wait, do not be sewn. We will ask Yuri how to do it polovchee (dump). My seller has unsubscribed that the manufacturer did not provide him with the firmware, but how he will provide ... etc. I also went over my firmware (Andr. 7.1) ... l- installed SuperSu to check for the presence of the root, and it did not start again. There was no choice, I had to sew UGOOS.
P.S. Finished the same saleswoman. Sent me two links: for updating through a computer, and through sd. References to "Baidu" pancake ... We'll have to fight with "Baid".

Post has been editedCelt30 - 01.08.17, 15:40


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
iamshaman
Message#29
02.08.17, 07:23
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 77
Check in: 01.07.12

Reputation:-  0  +

* Celt30,in my case, android 6th version, but I do not think it is critical. I will wait for your results.
Celt30
Message#30
02.08.17, 14:29
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

Baidu did win. I downloaded the firmware for updating via the Burning tool, now it downloads for SD. I disassembled the firmware, threw out unnecessary system applications for me, refused to assemble back. Strange, with other firmware this number passes. So far I have left it as it is, I just saved my own bootloader, and the console config, so that you can upgrade UGOOS (for those who need the work of their own console). 7-ku rolled ... for fun. Ruth is there, and it works, even if it doesn’t update binarik, I didn’t do it a second time, just in the settings I granted the rights. The firmware does not have a dock bar, and a status line. If the dock-bar and the application for taking screenshots can be tried to install from the market (I have not tried it yet), then I don’t know what to do with the status line. In general, it may not be critical for everyone, I have boxes on Rocchip, in one of the firmwares on which they were not there either. It didn’t bother me much; for several months I managed very well without them (I haven’t reshuffled yet). There is no “settings” item in Titanium, so it’s impossible to transfer the backup folder yet. In general, I have an old one, I need to try the fresher version. A similar situation was on the Mini m8s (without pro). Yuri flashed the MINIX firmware, and Titanium behaved the same way. He (Yuri) advised to throw out files from Android TV, and everything became normal. Here such a trick did not work, I did not find these files in that place. I haven't checked anything else yet (the sun has risen). I will continue to test in the evening, now they do not let me go to tilivizer. A little later, I'll reload the firmware on Mega and post it.


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Celt30
Message#31
02.08.17, 19:47
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

Once again, curiosity played a cruel joke with me. While testing on the UGOOS prefix and the native 7-ku inserted into it a card from another console, the MINI M8S, which works on the port from MINIX. When I returned the card to its place, MINIX became inoperable: and the root crashed, as a result of which the applications using it stopped working (they say nothing, they just do not start up and everything), and many other applications crash with a black screen (only restart). TWRP does not enter. I rebooted, restored the backup made earlier, nothing has changed. We'll have to install everything from scratch. I sin on UGOOS. A month and a half ago I put a port from UGOOS, made by Yuri (from the same innocent motivation, curiosity), on that prefix. Did not like. When rolling back, about the same thing happened. Then also no recovery tools helped, only the complete installation was clean.
And I also wanted to insert a card from the phone to 128 gigs, in order to check whether it will see its prefix. Anyway, of course I’ll do it, but only when I return home from vacation.


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Celt30
Message#32
02.08.17, 20:24
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

I post the native firmware for our Android 7.1.2 console.
For flashing via USB burning tool:https://mega.nz/#!B6wz…Fik_fDZ_3VprltALjeYuJU
For firmware via SD:https://mega.nz/#F!Ijp...OJ05dLtau-1F7ZUPzOzfTw
Here is a video instruction (for deaf-and-dumb: D) on firmware from SD:https://youtu.be/saZWCyXVETQ
I took the instruction in the Beelink topic header.
I ask the author of the topic to pick it all up in a hat (otherwise you have to press the "complaint" button, and ask the moderator about it ... and they are busy people: rolleyes :).


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Celt30
Message#33
03.08.17, 12:39
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

Adapted for our remote UGOOS AM3 1.1.1 firmware. I set myself working, but about her a little later.


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Celt30
Message#34
04.08.17, 14:39
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

All KU gentlemen! A very joyful event happened at night:* yurisavagemessiahzine.com,(all the praises in the form of benefits to him) posted in the subject Beelink GT1 latest firmware UGOOS 1.1.4. Naturally she got the changes, details here:Beelink GT1 / COOLEME® MB2 / Alfawise S92 [Android] (Post yurisavagemessiahzine.com #63776927). With the permission of the author, I inserted our bootloader into it, the remote config, replaced ES Explorer with another (more beautiful for my taste), added SuperSu 2.82, Galaxy launcher, and Titanium Backup. Titanium was not automatically installed, however, also manually (from the Preinstall folder). I threw it on the card, and installed it through the Appinstaller. The firmware is excellent, everything is fine plowing, except for one thing: the native console, the Power button does not turn off the console. Does not react to it at all. Turns on off. state, but does not want to turn off. It would be much worse if it were the other way around. What is the matter I do not know. There are several ways to solve this problem, about them later.
I'll also post the firmware UGOOS1.1.1. In its pure form, as it is. Only works with our remote control (also except the power button). It will get updates, but it will not be updated, because of our bootloader, and the console config. I recommend the update. freeze or remove. But it is better to put 1.1.4.

Post has been editedCelt30 - 04.08.17, 14:43


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Celt30
Message#35
04.08.17, 14:54
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

Perezal. The remote now works as it should. She, who is almost pristine clean, didn’t check for herself, but she is 99.9% sure that everything is fine with her.
Well, here they are, firmware:
UGOOS 1.1.4 (from Yuri):https://mega.nz/#!snZD...leotReDAMpXLagsUuVZJZs
UGOOS 1.1.1 (net):https://mega.nz/#!JvIV…Z0ULDy-pTqyttBY4GUujuM
Installation via USB Burning Tool. Information on how to use it (and the program itself) can be found in its native topic.
According to the tradition that has developed on the forum: I will remind you: RESPONSIBILITY FOR ALL MANIPULATIONS WITH FIRMWARE LIES EXCLUSIVELY ON YOU !!!
I forgot to add: in many places it is highly recommended, when receiving the root, to choose not the Supersu, but the Silent.

Post has been editedCelt30 - 12.08.17, 00:02


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
nessy74
Message#36
04.08.17, 22:46
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 714
Check in: 13.10.10

Reputation:-  122  +

I have such thoughts about the model "Mini M8S PRO":
- the same as the Beelink GT1 series (for hardware) and the Mini M8S II series (for case design)
- as there was no analog AV output, there is no way that makes it impossible: connecting to old TV sets with RCA "tulips", as well as making sound in the analog to an amplifier / speakers
- Wi-Fi antenna inside: as was a dead little “for a tick” antenna in the form of a piece of foil, and remained:
Wi-Fi connection quality will be nasty
- a vivid example when a manufacturer makes a new model that doesn’t carry anything in itself at all, but everyone will shout that “a new model, fly in, hurry, buy a painting!”
- Sorry, dear Bilink / Netkseon / AZV, with all respect as a normal manufacturer, but with this model I don’t understand the sense in it from the point of view of a reasonable buyer yet (marketers stupidly fool people, soaring "nothing new" as a "novelty" in order to earn some "fun piastres").
- the fact that people immediately begin to install non-native and unofficial firmware on the model does not speak in favor of the quality of the native firmware.
Well, what's there, is it important to immediately make high-quality firmware? the same iron is most importantly stuffed into a new box and shoved to trustful customers ...


--------------------
Owner-User-Tester: Amlogic S805 ... S912 / Rockchip RK3188 ... RK3399 / Allwinner A31 ... A80 / Nvidia Shield TV (+ receiver: YAMAHA RX-V377: HDMI 4K Hi-Res 5.1)
Do not ask me in PM about the advice that it is better to choose and where it is more profitable to buy - I do NOT answer such questions.
Celt30
Message#37
04.08.17, 22:53
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

* nessy74Thank you for your opinion. All of us (five) immediately felt sad and sorry for the money thrown out! : D


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
nessy74
Message#38
04.08.17, 23:15
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 714
Check in: 13.10.10

Reputation:-  122  +

Celt30 @ 04.08.17, 22:53*
sorry for the money thrown out

it's not about the money thrown out - I did not mean it, but about the small sense of the purchase of the model "Mini M8S PRO" if already a year there are on sale full analogs - "Beelink GT1"and newer"Beelink GT1 Ultimate"- which are much more famous and with much more extensive support on the forums.


--------------------
Owner-User-Tester: Amlogic S805 ... S912 / Rockchip RK3188 ... RK3399 / Allwinner A31 ... A80 / Nvidia Shield TV (+ receiver: YAMAHA RX-V377: HDMI 4K Hi-Res 5.1)
Do not ask me in PM about the advice that it is better to choose and where it is more profitable to buy - I do NOT answer such questions.
Celt30
Message#39
04.08.17, 23:33
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

* nessy74The meaning is just obvious. Why do I need to buy a beautiful box, at least for a thing more expensive, if no one sees this “beauty” behind the TV, and the beauty is doubtful. The difference in price can buy aeromysh, as I did. I can also use their technical support without restrictions. Why, reading the Beelink topic makes sure that few people need it. The overwhelming majority on the UGOOS mods sits. So from the point of view of common sense this purchase is quite justified. And in the UGOOS thread, I watch everyone just happy with their purchase. And the VI-FI at all polls just rolls over ... with a very beautiful, hefty external antenna!
P.S. Let's not flood. Talk niochem, and there is no one to clean the topic.

Post has been editedCelt30 - 04.08.17, 23:44


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Celt30
Message#40
05.08.17, 02:57
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 832
Check in: 03.02.13
OPPO Find 7

Reputation:-  143  +

Tura-tutu-tutu !!! I made a brilliant discovery! And as is often the case, quite by accident. It turns out the remote from our little animal works perfectly with my Mini M8S on the MINIX, including on-off. It immediately struck me that the remotes' configs are absolutely identical, the manufacturer, without further ado, left the old console! Immediately went through the firmware, and replaced the configs. Now everything works as it should. They will lie in the same place (I reload at the moment). : russian_garmoshka:

Post has been editedCelt30 - 05.08.17, 02:58


--------------------
... Uncle Vova did not read books - it was useless to him, since he himself wrote poems.
Nullez
Message#41
05.08.17, 14:13
Novice
***
[offline]

Group: Active users
Messages 39
Check in: 30.12.08

Reputation:-  4  +

Great news :)
Now I will download the firmware. Can they be used already? :)
With the remote in general, it is gorgeous :) It would have been a dog with him, but the fact that something was not working did not let me rest :)
But interestingly, can I change the configuration of the console with some kind of script or application?
After all, if there is a root, there should be no problems with editing / replacing system files?

I think boxing is a very good acquisition :) Carefully done, very good memory settings for a low price.
The only thing I had to do was take the airbrush with the keyboard :)

607 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19 9:51 PM