[X]Assistant

[Dmitri157]

DiscussionteXet TM-1067
teXet TM-1067, TM-1067
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

пїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

:

Operating System - Android 5.1
The processor - MediaTek MT8321 1300 MHz
The number of cores - 4
Built-in memory - 8 GB
RAM - 1 GB
Slot for memory cards - is, microSDHC, up to 32 GB

Screen:

Screen - 10.1 ", 1280x800
Widescreen - yes
Screen type - TFT IPS, glossy
Touch screen - capacitive, multitouch
Number of pixels per inch (PPI) - 149
Video Processor - Mali-400 MP2

Wireless connection:

Wi-Fi support - is, Wi-Fi 802.11n
Bluetooth support - is, Bluetooth 4.0
Work in cell phone mode is
The number of SIM-cards - 2
Mobile communications - 3G, EDGE, HSPA +, GPRS, GSM900, GSM1800, GSM1900

Camera:

Rear camera - yes, 2 megapixels
Front camera - yes, 0.3 megapixel

Sound:

Built-in speaker - there is
Built-in microphone - there is
FM tuner is

Functionality:

GPS - is
Automatic screen orientation - there is

Sensors:
accelerometer - is
The vibromotor is

Connection:

Connect to computer via USB - there is
Connecting external devices via USB - optional
Audio / headphone output - yes, 3.5 mm

Nutrition:

Battery capacity - 5000 mAh

Dimensions and weight:

Dimensions (LxWxD) - 260x165x10 mm
Weight - 500 g

Additional Information:

Components - tablet, USB cable, network adapter, manual

Photo

!!! ATTENTION !!!I highly recommend before all actions with the device - to make a full memory dump through the SP Flash Tool:SP Flash Tool is a flash driver for MTK smartphones. (Post wexxxx # 22556656) !!! ATTENTION !!!

ATTENTION!!!

There are two different revisions of this model - REV.A and REV.B - with the firmware not with its own revision - the tablet after the firmware will not respond to the power button.
there are also models on different motherboards - along and elink, before installing the firmware, see which board you have. (can be viewed in the build.prop file.
It is being restored (at least along with me) - with the firmware where my board is indicated, with a choice in the USB flash drive - Format All + Download.
when comparing scatter files from different revisions, there is a difference in the size of the preload, and some project:

Useful

>>>Page on the official website<<<

>>>Android 5.1 firmware firmware (obtained by removing a memory dump)along<<<

Deodexalong

Official firmware. thank wervolk90

For along

from 2016.07.03:ftp: //relay.alkotel.ru...ware/1067-20160703.rar
from 2016.08.11:ftp: //relay.alkotel.ru…8321_emmc_101_0811.zip

For elink

REV.A:
from 2017.08.09:ftp: //relay.alkotel.ru...re/TM-1067%20REV-A.rar

REV.B:
from 2017.03.11ftp: //relay.alkotel.ru…_W4_E1011_20170311.rar
from 2017.07.14ftp: //relay.alkotel.ru...REV.B%2014.07.2017.rar

More firmware revisionsAandB: teXet TM-1067 - Discussion (Post DimkinRussia # 72234318)

brick restoration after unsuccessful firmware:teXet TM-1067 - Discussion (Post FlyMen1 # 66876302)

Program-flasher:SP Flash Tool is a flash driver for MTK smartphones.

>>>TWRP 3.0.3 along<<<

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedDmitri157 - 11.04.18, 02:48

Reason for editing: added info about different motherboards.

[Dmitri157]

Vilnur1989 @ 08/23/18, 14:14

I cannot find the items.img file in the firmware

In firmware revisions for the specified platform - it does not exist.

P.S. when I changed my touch, I immediately looked at the model number of the module, and I was looking for it for it.
As a result, there were no problems with mirroring after replacement.

[Vilnur1989]

Dmitri157 @ 08.23.18, 14:40

Vilnur1989 @ 08/23/18, 14:14
I cannot find the items.img file in the firmware

In firmware revisions for the specified platform - it does not exist.

and please help, how to solve the problem with mirroring!?

[Dmitri157]

Vilnur1989 @ 08/23/18, 16:07

how to solve the problem with mirroring !?

I'm definitely not an assistant here.
because I have no experience with such problems.

The only thing I can advise is:
if changed in the service center - carry it back, it's their joint.

[plotnikofff]

No one has firmware on the device with s / n 1624009338. The tablet is loaded, it responds to everything, but on the screen there is a gray background with stripes after the firmware along / on the board marking al-mt8321-101-l3

[nikon165]

Hello owners of this miracle! Tell me for mercy, is it possible to stick a memory substitution?

[narochnyi]

Hello to all!

Throw a new touchscreen for this tablet, but it does not work correctly, the bottom is the top, the middle is the bottom. Tell me, what can I do and will the firmware help?

P.S. The tablet flashed, it did not help. In the developer settings, the Auto-rotate item was not found, disabling the Auto-rotation in the optional features did not help!

If more options?

Post has been editednarochnyi - 08.10.18, 12:40

[N.i.m.n.u.l.]

Help can anyone have a firmware tm-1057 percent MT8321 board K706_MB_1.2 SN 1621002795

[bobrinoleg]

Hello, after the firmware gray screen and stripes, help me find the right firmware, that's all I know about the tablet

Post has been editedMgalex - 11.12.18, 00:19

Reason for editing: Images under spoiler

[kuzua6]

Removing a Google Account after a reset or firmware. (Unlock FRP)

This instruction is for ELINK REV. A, about the other models can not say.

1. Download scatter -MT6580_Android_scatter.txt(9.23 KB)

2. Open Flashtool.
3. Choose our scatter in the "Scatter Loading File".
4. Go to the "Format" tab.
5. Select "Manual Format Flash".
6. Set the following values:
- Region: "EMMC_User"
- Begin Address [HEX]: 0x50A0000
- Format Length [HEX]: 0x100000
7. Press the "Start" button and connect the disabled tablet to the PC.
8. We are waiting for a green check mark, disconnect the tablet from the PC and launch it.

Everything :)


P / S: If you do not want to do this after each reset, go to "Settings" ->"About phone" ->"5-7 click on the build number until it pops up," You became a developer! ".
We return to the settings, select the item "For Developers" and turn on "Factory Unlock".

P / S2: If Flashtool does not see the phone, try to connect without battery.

Post has been editedkuzua6 - 10.04.19, 15:40

[bobrinoleg]

The third day I fight with a tablet, help me find the firmware

[CtufM]

Worn out with this tablet. There are at least 3 different boards: ELINK EJ01R_V3_2016.06.02, ALONG AL-MT8321-101-L3-V1.2 2015.10.28, ELINK E101B_V1_2015122304.
The ELINK E101B_V1_2015122304 board, went up only from the Along MT8321 firmware,
ALONG AL-MT8321-101-L3-V1.2 2015.10.28 board also rises with Along MT8321 firmware
ELINK EJ01R_V3_2016.06.02 board after the swamped preloader did not get up to the 1st of the firmware, it seems they are not on the network, so MANDATORY merge the backup before flashing such a board

[bobrinoleg]

CtufM @ 12/19/18, 12:55

Worn out with this tablet. There are at least 3 different boards: ELINK EJ01R_V3_2016.06.02, ALONG AL-MT8321-101-L3-V1.2 2015.10.28, ELINK E101B_V1_2015122304.
The ELINK E101B_V1_2015122304 board, went up only from the Along MT8321 firmware,
ALONG AL-MT8321-101-L3-V1.2 2015.10.28 board also rises with Along MT8321 firmware
ELINK EJ01R_V3_2016.06.02 board after the swamped preloader did not get up to the 1st of the firmware, it seems they are not on the network, so MANDATORY merge the backup before flashing such a board

I have an ALONG AL-MT8321-101-L3-V1.2 2015.10.28 board, the firmware flies the norm, but after turning on the gray and stripes, the tablet loads, when connected to a PC it is determined, tried all the firmware, read that the Lk file .bin need to be changed, but where to get it ???

Post has been editedbobrinoleg - 19.12.18, 15:43

[CtufM]

Keep full merged with AL-MT8321-101-L3-V1.2 2015.10.28 before firmware using SP FT, there are all the markup
sew ONLY EMMC_USER for FIG know what memory you have on the board and whether the preloader will fit it
https: //drive.google.c....YcNbH27bLlz1NtL9QikSWN
if not efficiently, then you need to experiment with files from other firmware

[CtufM]

All the same, the ELINK E101B_V1_2015122304 board has not been upgraded by firmware from
I installed the firmware from Arhos 101c Copper, replaced it in the firmware LK.bin, Boot.img, logo.bin, recovery.img, items.img from the firmware rev.B (TM-1067 REV-B [stock backup] SN1708) using scatter from Arhos 101c Copper
Now the tablet works, even imei is

[bobrinoleg]

CtufM @ 12/19/2018, 16:46

Keep full merged with AL-MT8321-101-L3-V1.2 2015.10.28 before firmware using SP FT, there are all the markup
sew ONLY EMMC_USER for FIG know what memory you have on the board and whether the preloader will fit it
https: //drive.google.c....YcNbH27bLlz1NtL9QikSWN
if not efficiently, then you need to experiment with files from other firmware

[quote] the torture continues, I can’t download a request from a scanner, pulled the same gray screen out of this full lk.bin (maybe something I’m doing wrong, and how is this lk. bin inserted properly? Just replace one with another ?

Post has been editedbobrinoleg - 16.01.19, 12:43

[DimkinRussia]

Firmware for ALONG AL-MT8321-101-L3-V1.2 card 2015.10.28

https://cloud.mail.ru/public/MBj1/wQqEDnmp8

[gsufer]

teXet TM-1067 ELINK E101R_V3_2016.06.02 board. If anyone needs to write, I will backup and fill in. REV.:A

Post has been editedgsufer - 11.02.19, 18:51

[sergojan92]

Helter @ 11/23/2017, 21:58

Can someone tell me - I changed the sensor and it does everything in a mirror image
And this is already in 2 years the second sensor and both worked in a mirror from different vendors.
It is necessary to calibrate, but how, can anyone come across. What do you advise.

Good day wish. You have solved the problem of mirroring work after replacement. All searched did not find such firmware. Can you help ?? Thank you in advance

[lapuchka1]

gsufer,
Yes, it would not hurt backup, fighting with the same miracle. Pour those pliz on coca do not be exchanger

[rpogHo]

Something with the volume button held down is determined in emergency mode, but in the flashtool it does not go further than the red line. Fired elink e101r_v3_2016.06.02 firmware from along (((