Installing android
To install the required USB flash drive 2-32GB and keyboard.
1. Format the USB flash drive in FAT32, does not matter the name, the default cluster size.
2. Download and unzip the file to a flash drive with the firmware, with archive files must be in the root of the stick, not in a folder.
3. Set the size of the android, the choice of prepared files on 6, 8, 16GB, or all the available disk. Unpack the archive gpt_Android.rar, select the desired size and copy the replacement gpt.bin file on a USB flash drive.
gpt_Android.rar(2.23 KB)
4. Start the actual installation, for this it is necessary to turn off the Pip better immediately after the android, then there will be dancing with a tambourine, connect a keyboard and a USB flash drive. Enable Pip and start pressing the Del key to enter the BIOS, go to the right-most tab and press the bottom of the second paragraph.
Lounch EFI Shell ... You should run the yellow line and after a delay of 5 seconds. will begin installing android.
Pipa droidboot restart in a few minutes after the start of the installation in an android, no action on your part is required.
Windows to install after the installation of the android.
Download to Android. Plug the prepared USB flash drive, Claudia, mouse. In the curtain from top to select reboot in Windows. The dual-boot menu will be selected Windows icon.
Post has been editedD_Kuzma - 07.10.19, 15:29