[X]Assistant

[Anticooler]

Minirobot Ninebot mini (Xiaomi Clone)

• In the subject are allForum Rules | Section Rules;
  
• Useful topics to note:Forum FAQ | How to clean the image under the spoiler;
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where you were helped, and write thanks;
  
• In the absence of the curator, the moderator fills the topic header. Use the buttonon the message, which, in your opinion, you need to add to the header to contact the moderator.
  

Device photos

Device description

Minirobot Ninebot mini is a full-fledged clone of the Xiaomi Ninebot mini hoverboard with similar characteristics.
Available in black, white and in various colors, the build quality is at the original level.

Device characteristics

Maximum speed: 16 km / h
- Maximum torque: 60 Nm
- Rated power of engines: 700 W
- Battery: 54.8V, 4400 mAh
- Maximum climb angle: around 15 В°
- Chassis height: ground clearance 60 mm
- Moisture protection class: IP54
- Ride time: from 2 to 3 hours
- Protection against overvoltage, undervoltage, short circuit, overheating.
- The case from shock-resistant plastic, steady against blows and vibrations.
- Maximum load: 100 kg

Useful information

Application for Android phones:https://apkpure.com/m1robot/com.mini.m1robot
Application for phones on the iOS platform (iPhone):https: //itunes.apple.c...p/m1robot/id1152279939

Platform Compatibility

Android, iOS

Posted 05/24/2017 10:21:

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).

Post has been editedmihadom - 16.05.18, 09:54

[Danya300]

how does the M1 differ from the M3 White and black as I understand it M3 This is a nain bot mini pro

[Olle-256]

Everything would be fine, but a mini-robot with an awfully loud voice all the time indicates that Bluetooth is ready.
Only unplug the speaker?

[1upus]

Olle-256,about! You have a version with a bluetooth speaker. It is only needed to play music. It is possible to power off the receiver board. I would even recommend it.

[Olle-256]

1upus,No, the music does not go on it - there is no profile.
Only a noisy aunt yells in English all the time.
And beeps.
We'll have to disassemble and disable the speaker.

[1upus]

Olle-256,noisy aunt usually yells from the musical dynamics, and beeps - the other.

[Olle-256]

1upus,
Yes
According to the instructions fromhttps://youtu.be/AcEsX9rKTjQopen. There are 2 such connectors, the same.
One for the squeaker, the other for the aunt. Tweezers both turned off, it became quiet.

[4emax]

Experts, tell me, are there any examples of using this unit in the winter?

If there is, tell me how much charge is enough and whether it is going on ice or snow at all.

Post has been edited4emax - 24.12.17, 15:12

Reason for editing: Added

[zlodeika90]

Good afternoon, where can I buy this control stick? The child was given this, and she is not very reliable
And please take a picture of how it is attached, otherwise 3 complete bolts are different and everyone fits))))

[Olle-256]

zlodeika90,
It?

rack mount

http: // cs5-3.savagemessiahzine.com.to / 12493697.jpg

Post has been editedOlle-256 - 26.03.18, 12:13

[1upus]

Danya300,
Not understood correctly.
M1 for 36 volt akb, M3 for 54 volt.
Original Ninebot Mini / Light / Pro - 54 Volts.

M1 is a cheaper version. In general, besides the slush design, regardless of the filling, mini-bots have nothing to do with the original and are sooooo far from it in quality. Those who say that they did not feel the difference, either did not have the opportunity to compare normally, or could not admit to themselves that it turned out not to save, but to waste money.

[zlodeika90]

And another question, while riding, periodically crackling of the wings and a nasty creak are heard, because of what could it be?

Post has been editedzlodeika90 - 30.03.18, 15:40

[1upus]

Due to poor fitting of parts or poor quality plastic. Or one and the other at the same time. Look at how many wings sit tight to the sandwiches and the rear bumper.

[Dmitry011971]

Hello
tell me, pumped all the available applications in appstore
None of them find a miracle scooter, can I do something wrong?
thank

[1upus]

There is usually a sticker on the steering wheel; the name of the application is written there.

[zlodeika90]

What does the heart mean in the application? And the application has been updated, I realized that the functions were cut, I can’t adjust the turn signals, and who can share links to parts and axes for the hoverboard

[graf_bl]

1upus @ 05.05.18, 0:13

application

1upus @ 05.05.18, 0:13

What is there to discuss?

Well I do not know! I have a month like 54 volts, I took it myself after I tried it on the same thing, it is also okay, but maybe there are some nuances, since I did not come across the original, but I am completely satisfied with the device. Passed 200km, the first one that inspired me for more than 500km. The only problem I have is the backlash in the steering wheel about 1 centimeter. It doesn’t affect his work;

[1upus]

graf_bl,in which projection you play the steering wheel?
One of the most frequent mechanical problems is a break in the shaft to which the steering wheel is attached. Unlike the original, it is cast from a low-grade silumin alloy and we install the original from the nynbots.

[graf_bl]

1upus @ 05.05.18, 17:25

graf_bl, in which projection you have the steering wheel play?
One of the most frequent mechanical problems is a break in the shaft to which the steering wheel is attached. Unlike the original, it is cast from a low-grade silumin alloy and we install the original from the nynbots.

It really does play on the shaft itself, the steering wheel itself is fixed on it tightly. While this does not affect the work as a whole, I will not change it. I'll try to make out and look. He backlash from the very beginning, can not press the shaft inside ?!

[1upus]

graf_bl,I would come to find out the reason, though she sits deeply ...
The algorithm is as follows:
1. Remove acb
2. Remove the front and rear bumper
3. Remove the platform pedals
4. Remove the keel and we have a goal.

1. Check the integrity of the cup covering the shaft and how well it is pressed. It happens that her eyes have broken off. More often seen on the originals after a good blow. The solution is to change the cup. Worse, if the thread in the bore holes is torn off, but also resolute.
2. Check the integrity of the shaft. If stoman and miraculously keeps - under the replacement. I have never seen a cracked one - either whole or broken.
3. The most favorable outcome (if the backlash is from the moment of purchase, it looks like this is your case) - during assembly, the hardworking native put the pressure plate under the shaft with a bend down then turn it over, put the shaft and cup in place, tighten the bolts and evaluate the backlash .
Worse, if the plate forgot to set the bend.
Even worse, when it is not, but the symptoms are not very similar.

[graf_bl]

1upus @ 05.05.18, 22:35

Worse, if the plate forgot to set the bend.
Even worse, when it is not, but the symptoms are not very similar.

Ok, thanks, I'll try to accomplish my goal.