Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
ZTE Blade A5 Pro - Firmware |
Message#42 28.09.16, 10:23 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 201 Check in: 02.11.11 Reputation: 13 | |
Message#43 28.09.16, 10:34 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 168 Check in: 08.03.16 Ark Benefit M503 LTE Reputation: 6 | And maybe someone's hands are crooked, I through this recovery more than once of the firmware put Then lay out the normal instructions. How to install the recovery and how to install the firmware. Post has been editedr-cafin - 28.09.16, 10:36 |
Message#44 01.10.16, 11:01 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 168 Check in: 08.03.16 Ark Benefit M503 LTE Reputation: 6 | Voooobsche unlocked without root and dancing. 1-through ADB put the recovery of 287, 2-through the recovery put the patch from the cap, 3-through ADB put stock recovery, 4 and only then wipe. while it seems to work. anyone can check. After checking, you can add to the header. By the way, if you do the points, then the stock tracking turns on as it should ... Post has been editedr-cafin - 01.10.16, 11:06 |
Message#45 09.11.16, 13:42 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 517 Check in: 29.06.12 Reputation: 56 | Hello! I will share experiences on the carcass. I bought a friend the other day at his request. For him, it was critically important to switch 3G to different SIM cards. On this body, as I understood it, only one firmware port from Lenovo can. On my smart was 1.0.1 stock from a megaphone, made a root and put Flasheti on instr. from the cap. Everything started, but the ambush went further. Stock recovery (of course) refused to install the firmware from Lenovo, recovery 2.8.5 refused to start at all (flying to a white screen and hanging), and 2.8.7 just gave the error -signature verification failed. error flashing zip. I tried everything from the caps and even from other smarts - FIG. 2.8.5, in general, none were launched, and 2.8.7 many worked, but all produced this error. I do not presume to say that this is not possible, but I did not succeed (I have a lot of experience with the firmware of various devices). Updated to runoff 1.0.3 - the result is similar, ie, 0. And only after flashing runoff 1.0.2 for RD from the header everything worked and the necessary LAOSP A1000 firmware for me CWM \ TWRP ROM got normal. In the firmware 1.0.2 from the header, the recovery of version 2.8.5.0 is integrated, and he decided everything. By the way, the driver for RD is better to take from the header - the third option (they are already signed and you don’t have to bother with installing them (I have W7-64). Maybe all this is described in the posts, but I did not find. May experience someone to come in handy. Good luck to all! : yes2: -------------------- Andrew |
Message#46 12.11.16, 11:15 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 647 Check in: 29.10.12 Reputation: 94 | Who has problems with IMEI and SN. I laid out MOBILETESTER R5.0.0001 ZTE Blade A5 Pro - Discussion (Post vit1651 # 53607654) Tested. It works fine. We start MobileTester.exe from the admin, on the 1 tab (settings) we tap Connect, we connect the switched off phone to the computer. Prog perfectly sees it. On the 2 tab (Misc Information) we work with IMEI and SN. Read - reading of what we have, correcting for what we need. Write - write. Next - Disconnect. Disconnect from the phone. The phone turns on after juggling the battery. Windows 10 64 bit. Test mode. Drivers attached. Added. Works on stock recovery. When installing TWRP, the phone enters the recovery ... Attached files Drivers.rar(15.71 MB) Post has been editedvit1651 - 13.11.16, 10:39 Reason for editing: In the header |
Message#47 13.11.16, 12:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 647 Check in: 29.10.12 Reputation: 94 | As I untied the phone from Megaphone. The initial state. From the shop. Updated to version 1.0.3. I got Root in the standard way (KingRoot, downloaded the latest version from xda), through Flashify installed TWRP 2.8.7.0 EN from the header. Zabokapilsya. Next, I flashed a backup, laid out by one very good person. TWRP_unlock_with_change_IMEI from here:ZTE Blade A5 Pro - Discussion (Post by lanstatemap # 53805012)(do not forget to say thank you). The phone was unlocked, IMEI naturally changed, the serial remained native. I'm trying to change IMEI using MOBILETESTER_R5.0.0001. Phone does not connect. I'm flashing through Flashify native recovery. I launch MOBILETESTER, it connects normally. Change IMEI for this methodZTE Blade A5 Pro - Discussion (Post vit1651 # 55017033)to relatives. The phone is unlocked, IMEI is yours. I wish you all good luck. Post has been editedMgalex - 13.11.16, 18:47 Reason for editing: In the header |
Message#48 19.11.16, 13:31 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1118 Check in: 25.12.12 Apple iPhone 5c Reputation: 76 | Who is interested in working modem with itel version 15.50 Set via twrp backups. Unpack to a folder and set. modem_v15.50.zip(4.85 MB) I think that new is better but not always of course, but so far it works without problems. Post has been editedDOOM933 - 19.11.16, 14:41 |
Message#49 29.11.16, 11:02 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 167 Check in: 27.09.11 Apple iPhone Xs Max Reputation: 110 | <Partitions> <! - size unit is MBytes -> <!--<Partition id = "splloader" size = "1" /> --> <!--<Partition id = "uboot" size = "1" /> --> <Partition id = "prodnv" size = "5" /> <Partition id = "miscdata" size = "1" /> <Partition id = "wmodem" size = "8" /> <Partition id = "wdsp" size = "2" /> <Partition id = "wfixnv1" size = "1" /> <Partition id = "wfixnv2" size = "1" /> <Partition id = "wruntimenv1" size = "1" /> <Partition id = "wruntimenv2" size = "1" /> <Partition id = "wcnmodem" size = "1" /> <Partition id = "wcnfixnv1" size = "1" /> <Partition id = "wcnfixnv2" size = "1" /> <Partition id = "wcnruntimenv1" size = "1" /> <Partition id = "wcnruntimenv2" size = "1" /> <Partition id = "logo" size = "1" /> <Partition id = "fbootlogo" size = "1" /> <Partition id = "boot" size = "15" /> <Partition id = "system" size = "1660" /> <Partition id = "oem" size = "20" /> <Partition id = "cache" size = "150" /> <Partition id = "recovery" size = "12" /> <Partition id = "misc" size = "1" /> <Partition id = "userdata" size = "0xFFFFFFFF" /> </ Partitions> PS A bit later I'll post it with root, simlock, etc. Post has been editedvelikijzhuk - 29.11.16, 11:03 -------------------- Take Galaxy S4 in the hands and write in the terminal emulator: su dd if = / dev / zero of = / dev / block / mmcblk0p3 |
Message#50 29.11.16, 16:12 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 167 Check in: 27.09.11 Apple iPhone Xs Max Reputation: 110 | 1.0.3 root PAC for RD Installed SuperSU, BusyBox, time zones 2016j There is no SIM-Lock, IMEI does not change, the markup is native, nothing has been removed. !!! Who will sew after non-native markup, be sure to make a wipe through the settings after the first boot !!! Yes, and so you can just wipe just in case. Yandex.Disk Post has been editedMgalex - 29.11.16, 20:03 Reason for editing: In the header -------------------- Take Galaxy S4 in the hands and write in the terminal emulator: su dd if = / dev / zero of = / dev / block / mmcblk0p3 |
Message#51 29.11.16, 18:30 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 167 Check in: 27.09.11 Apple iPhone Xs Max Reputation: 110 | indikator8, 1. Clamp on the phone off Volume + and - 2. Insert the cable into the PC and tel. 3. You put the driver off the phone from the PC (firewood signed on the last 10 x64 without rebooting work) 4. Juggle the battery 5. Download firmware for RD, launch RD, select * .pac file, press button with triangle 6. Clamp on the phone off Volume + and - 7. Insert cable 8. Waiting for the end of the process. Attached files drivers.7z(8.39 MB) RESEARCHDOWNLOAD_R4.0.0001.7z(3.76 MB) Post has been editedvelikijzhuk - 29.11.16, 18:31 -------------------- Take Galaxy S4 in the hands and write in the terminal emulator: su dd if = / dev / zero of = / dev / block / mmcblk0p3 |
Message#52 01.12.16, 15:13 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 424 Check in: 10.04.13 Wileyfox Swift 2 Plus Reputation: 34 | Hello! A couple of days ago, my daughter decided to insert a second operator in this phone and opened your topic, saw how to do it. BUT Remembered the way I am free and without flashingunlocked her old smartphone MTS 970N So I suggest to try and other(just know that codes are often asked for there and they are almost always given, so that the forum doesn’t get clogged up much, the themes are transferred to a new name, and the old one is deleted. But there is a search and hammer"ZTE Onlok" for example, and just like I can find a forum where to ask the code! ) The code was sent the next day or a little more. The SITE is foreign, and since I have an Internet beeline, I had to include a program for replacing IP addresses from Russian to a foreign one, but when I was a simple provider, I definitely went to it without replacing IP addresses This method is free and not long, so I advise YOU! If you received the code, then insert the SIM of another operator and getenter it If my method helped you, then I am very grateful for the help! (-: And you understand that the person who gives you the codes, he does not require money and does not do it for the sake of self-interest! BanalThanks he has enough Post has been editedAkella_MC - 10.06.17, 23:21 Reason for editing: In the header -------------------- Changed Highscreen Easy S to Wileyfox Swift 2 Plus and is pleased. |
Message#53 27.12.16, 09:33 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 189 Check in: 06.03.15 Xiaomi Redmi 5A Reputation: 6 | http://vash-web.ru/pro...ei_408_f-or_af3-m-rar/firmware from itel for RD (ZTE Blade AF3 - Itei_408_f or_AF3-m) Verified on your smartphone. Mirror onYaDisk Post has been editedAlexanderL - 27.12.16, 20:01 Reason for editing: In the header |
Message#54 27.12.16, 16:07 | |
AVR [offline] Group: Friendssavagemessiahzine.com Messages 341 Check in: 27.12.14 Samsung Galaxy Win Duos GT-i8552 Reputation: 12 | Ported TWRP 3.0.2-0 file new_TWRP.img Since the beginning of a long logo a little longer, but it works checked! Who does not work TWRP.img Attached files new_TWRP.img(12.69 MB) TWRP.img(11.56 MB) Post has been editedmarineboy1 - 27.12.16, 18:16 Reason for editing: In the header |
Message#55 27.12.16, 18:06 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1659 Check in: 15.01.14 Lenovo A2010 Reputation: 77 | |
Message#56 27.12.16, 18:13 | |
AVR [offline] Group: Friendssavagemessiahzine.com Messages 341 Check in: 27.12.14 Samsung Galaxy Win Duos GT-i8552 Reputation: 12 | I know I do not see too. This is my first port of recovery will be the time to do. Posted on 12/27/2016, 6:15 PM: [email protected], 06:22 3.0-2.0 Need to change to 3.0.2-0 |
Message#57 28.12.16, 21:08 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1659 Check in: 15.01.14 Lenovo A2010 Reputation: 77 | Here it is LAOSP_FINAL for TWRP 2.8.5.0 for tvrp firmwarehttps: //drive.google.c...0TVU/view? usp = drivesdk Post has been editedAlexanderL - 30.12.16, 13:00 Reason for editing: In the header |
Message#58 29.12.16, 10:25 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1659 Check in: 15.01.14 Lenovo A2010 Reputation: 77 | anemak,I had so that the bodies also did not turn on at all to any recovery, anywhere, but it was determined in the device manager, maybe your battery died at all to zero, you should try to charge it like that, for example, even with the same wires plus or minus on the new connect the phone to my computer) Posted 12/29/2016 10:30: zidan 05/23/2016,here is a backup lap from tvrp https: //drive.google.c...3aFE/view? usp = drivesdk Drop this backup of the last Laosp into the cap) Post has been editedAlexanderL - 15.01.17, 16:00 Reason for editing: In the header |
Message#59 29.12.16, 10:41 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1659 Check in: 15.01.14 Lenovo A2010 Reputation: 77 | |
Message#60 02.01.17, 11:58 | |
Old resident [offline] Group: Banned Messages 729 Check in: 23.06.16 Xiaomi Redmi 4X 2/16 Reputation: 34 | Guys, you have a gift - a fully working TWRP 3.0.2.0 from lenovo a1000! Touch works! Check Attached files TWRP-3.0.2.0__A1000__by__nemo-nemo.img(8.76 MB) Post has been editedMgalex - 02.01.17, 13:16 Reason for editing: In the header |
Message#61 02.01.17, 12:24 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 222 Check in: 04.11.15 Reputation: 13 | zidan 05/23/2016I feel in advance that it will not work. But for every fireman check. Well yes. Same. White screen Post has been editedBeerbear91 - 02.01.17, 12:28 Reason for editing: Completed -------------------- 3xBla |
mobile version | Now: 04/30/19, 15:14 |