Assistant
| REPLY |
 Xiaomi Redmi 4X - Unofficial firmware |
Message#22  18.06.17, 21:37 | |
Old resident  [online] Group: Friendssavagemessiahzine.com Messages 1041 Check in: 15.07.13 Xiaomi Redmi 5 Plus 3/32 Reputation:  339  | "The display has gone out after an unsuccessful firmware recovery." Article for those who know that his bootloader is unlocked.(How to find out, look in the cap) Sometimes it happens that when installing recovery through a batch file from the header, recovery.img download is in progress, after pressing the enter, boot.img seems to be correcting, during which it gives an error and then the screen just goes out. When you connect your phone to your computer, it somehow shows up, but you don’t need to flash it or you need to pinch the test points. I did not sew. In the agony, I fought and thought about how to get out of the situation, because the phone is new and already brick ??? Took all the keys and held for a long time, did not help.Solution: long hold the power button,The phone will wake up and load. Further, if we want recovery, we can try again to sew a file through the baht ... But I acted differently, was sewn right away. So, go to the folder with adb, or extract the archive from the recovery to the folder in the root of the C: / adb drive, hold down the shift, right-click to open the command window. Next, open the baht file through notepad and copy the commands into the command window, execute, after which the device will reboot into the recovery. This trabl, as I understand it, rarely happens, but it happens. He helped the man in the next branch with his observation. Maybe someone will be useful.  Post has been editedxaverty - 26.07.17, 15:07 Reason for editing: stamp, errors |
Message#23 19.06.17, 07:57 | |
Darwin Kernel [offline] Group: Friendssavagemessiahzine.com Messages 565 Check in: 27.12.12 Xiaomi Redmi 4X 2/16 Reputation: 53 |  waiser,I did not have a flashing of the recovery, everything went according to the batch file scenario, but there was no reset in the recovery. After the reboot of the device flew into the system. Here is what I say. The problem is not in the batch file, but rather in the rights. It must be run as administrator, but after the second command in the batch file, he writes that fastboot is not a win program. This is most likely due to the fact that when you run as the admin, the default folder in which cmd starts working is c: / and not the adb recovery and batch file. And if you run without admin rights, nothing happens. In general, you need to fix the batch file, or in the description, tell unzip the contents of the archive to the root of the disk and not to the folder. In general, make a separate instruction in addition to work in the terminal with commands, and not with a bow. There are only 3 teams copied and ready. So safer and without further problems. Post has been editediSoldat - 19.06.17, 08:06 Reason for editing: Correcting errors t9 -------------------- All were once noobs. |
Message#24 19.06.17, 08:21 | |
Darwin Kernel [offline] Group: Friendssavagemessiahzine.com Messages 565 Check in: 27.12.12 Xiaomi Redmi 4X 2/16 Reputation: 53 | More guys. Lineage os 13 v1 from the header. I put on charging and what I see ... Fast charging ... Chinese stockpile 5/2 burst and I do not know whether to believe or not, but 25% in 23-26 minutes. There are no testers to check the charging. Is the lineage included fast charging ?? Or is it just that the optimization is such that the discharge is smaller, hence the charge is faster? On miui it was charged obviously longer Posted on 06/19/2017 08:23: xaverty,Just yesterday and put on the instructions and did not get up at all. Some also have problems in this thread, so I decided to unsubscribe -------------------- All were once noobs. |
Message#25 21.06.17, 17:24 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 419 Check in: 17.09.07 Xiaomi Redmi 4X 3/32 Reputation: 64 | I requested LineageOS fromsilent27When you first set up, foolishly turned on the password when booting, without understanding that it was about encrypting the internal memory. After that, I tried to just reset, reset data, then wipe absolutely all partitions and rewind the firmware. Every time I write "Encrypted" in Security-Encryption.Is it not disabled and used in the firmware forcibly or how?Although the password no longer asks when loading the device and in general the last time I didn’t even configure the screen lock, but I still write that it is encrypted. With all this, if you boot into TWRP, then all files are visible and not encrypted by adb. When trying to reset the settings in the OS itself, she writes that user data will be erased, because the phone is encrypted. I do not understand anything. (See post below!) Post has been editedxaverty - 28.10.17, 17:43 Reason for editing: stamp |
Message#26 21.06.17, 17:57 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 419 Check in: 17.09.07 Xiaomi Redmi 4X 3/32 Reputation: 64 | [email protected], 16:40 Try to enable encryption after the firmware (enter the same password!), and then disable it. I remember him, only after all the wipes he is nowhere and not requested, just the system itself thinks for some reason that the user is encrypted. Well, to decipher - this is not in the menu. There, only the status is displayed. In general, the system thinks that the section with user data is encrypted, but in fact, the data is read without any password from TWRP. On the Internet, a lot of information and instructions such ashttps: //android.stacke...cryption-from-recoverybut for me so far no method has worked. I will sew a stock in the hope that it will overwrite everything. Solved. It only helped from the fastboot to wipe the partition that is mounted in / userdata, more precisely, fastboot recreated it and the partition became normal, not encrypted In the normal state, it looks like this (the numbers may differ think): / dev / block / mmcblk0p24 And the encrypted section is: / dev / block / dm-0 From dm- begin the names of encrypted sections. TWRP did not help. You could probably format the partition with pens through mkfs, but there was no desire to tinker with selecting parameters. Directly solution: To cancel the encryption of the partition, you must enter the command in fastboot mode. Where to get the utilities, how to switch the phone to fastboot mode and where to enter commands on the PC itself, described in detail under the third spoiler of this post in paragraphs 1-5Xiaomi Redmi 4X - MIUI Firmware (Post Camerado # 62946455) The team itself for fastboot fastboot format userdata The user section will be re-created, the data will naturally be lost. Post has been editedPub - 18.12.17, 18:18 Reason for editing: because of the flow of questions in QMS, added a link to how to get into the fastboot. |
Message#27 21.06.17, 23:52 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 419 Check in: 17.09.07 Xiaomi Redmi 4X 3/32 Reputation: 64 | Questions on LineageOS: 1) Is it possible to turn off the vibra with successful recognition of a print? So as in stock. 2) Is it possible to turn off the sound when taking a photo with a standard camera? Auto-brightness on LineageOS is generally not usable, if during the day it is not so noticeable and not so critical, then in the dark, when every change is clearly visible - it becomes unbearable, the display brightness may change up or down without external influences: the same position, then the same coverage of the last 10-15 minutes, and then the light begins to change, and with a huge jump. I remember when the latest off-firmware (8.2.10.0) "broke" the auto-backlight, then this effect is multiplied at times. Post has been editedPub - 22.06.17, 00:58 |
Message#28 22.06.17, 16:29 | |
Visitor [offline] Group: Active users Messages 20 Check in: 09.04.14 Xiaomi Redmi Note 4 3/32 Reputation: 17 | alexbel776, in the settings of SIM cards there is a point of the "operator network". By default, there is an auto mode. If you turn it off - the phone will find and show all available networks (looking for a long time). When the search is over, it will be possible to force a network. My operator has separate networks for 2, 3 and 4g. Chose 4g. The flight is normal. Connects instantly. Do not break. |
Message#29 22.06.17, 22:18 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 419 Check in: 17.09.07 Xiaomi Redmi 4X 3/32 Reputation: 64 | A folder has been created on the ruler. / sdcard / wlan_logs And there are three files host_driver_logs_current.txt cnss_fw_logs_current.txt cnss_fw_logs_000.txt In the morning I deleted it, in the evening the smallest one ran up to 18Mb, more - 26 and 30. In the developer's menu, "WiFi verbose logging" is disabled, where else what debugging can be enabled? I have one so? Post has been editedPub - 22.06.17, 22:19 |
Message#30 23.06.17, 00:11 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 321 Check in: 04.01.14 Xiaomi Redmi Note 5 3/32 Reputation: 37 | |
Message#31 25.06.17, 20:19 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 373 Check in: 28.04.12 Sony Xperia XA2 H3113 Reputation: 27 | [email protected], 15:54 Explain knowing that neither so ?? It's simple. The phone has a system fixed partition / system. From the weight of the firmware will only depend on the employment of this section. This is not related to the / data section. To increase the memory, you need to do redevelopment with an increase in the size of / data, but not the fact that the firmware will want to be installed in the corrected / system. For example, on older models of phones that started with android 4.4, and which sawed custom on 5.0 / 6.0, redesigned to increase / system was required, and for downgrade, on the other hand, to reduce to decrease. Post has been editedxaverty - 15.01.18, 18:01 Reason for editing: overclocking |
Message#32 30.06.17, 17:16 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 06.12.08 Samsung Galaxy J3 (2017) SM-J330F Reputation: 8 | DecisionThe problems of a broken 3-button headset. Thanks for the tipyefunutaand for the decisionMaldoror. For the headset volume buttons to work in the file /system/usr/keylayout/Generic.kl need to add lines key 250 VOLUME_DOWN key 251 VOLUME_UP 250 and 251 are my buttons, other headsets may have other (although unlikely). To determinethis prog. Post has been editedxaverty - 09.09.17, 20:40 Reason for editing: software update |
Message#33 30.06.17, 19:22 | |
a guest [offline] Group: Users Messages 9 Check in: 19.05.10 Xiaomi Redmi 4X 3/32 Reputation: 0 | In general, I set myself linage os 13 v1 from silent, someone said that the battery holds well ... In the morning it was 75%, after 12 hours (did almost nothing and installed only the vibe, there was no time to restore anything else) and at 7 pm - 41%. THIS I HAD NOTHING DONE ANYTHING ON A MOBILE! What kind of autonomy is the comrades .... My lenovo p780 is new, with an average load per day for 2-3 days calmly kept .... 4 days if it doesn’t load so much ... I’m not used to it so that I charge the battery with 4k battery once a day ... Maybe I put the wrong line? Or Mokke can try? |
Message#34 30.06.17, 22:50 | |
Advanced juzver [offline] Group: Friendssavagemessiahzine.com Messages 2887 Check in: 17.12.13 Xiaomi Redmi 4X 2/16 Reputation: 390 | -------------------- |
Message#35 30.06.17, 23:08 | |
a guest [offline] Group: Users Messages 9 Check in: 19.05.10 Xiaomi Redmi 4X 3/32 Reputation: 0 | dangerouspkzm @ 06/30/2017, 19:33 ... Gaps what put? The same firmware, quietly holds for 2-3 days. Gaps put those that are in the manual for the installation of the line, clicked on the link, chose the architecture, and the minimum set of Google services - like pico was called ... There, just in the header 2 version of the line, put os 13 v1. Nz che so eats infection |
Message#36 01.07.17, 01:19 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 852 Check in: 22.04.13 Reputation: 51 | The problem with the bluetooth remote control for media management, as described above, has been resolved. It turned out that it is caused by the Google application. I rolled back the application to the version that goes by default by clicking Uninstall, and everything began to work as expected. I spent 5 hours searching for a solution, I had to re-install and install-delete a bunch of applications, checking the operation of the keychain (I initially sinned on the xposed framework). |
Message#37 01.07.17, 15:04 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1041 Check in: 15.07.13 Xiaomi Redmi 5 Plus 3/32 Reputation: 339 | I created a backup of all partitions, so that when installing other firmwares, just roll back and not install everything again, I noticed that when restoring the backup, my unlock key did not fit. I went into the recovery, deleted the key, started again, the pattern disappeared, put the key again, made a backup again. I installed the last flymy at the moment, then decided to roll back, restored the backup again, the key was already in my new backup. Before that I remember someone had questions about it. Described my observation. |
Message#38 01.07.17, 15:42 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 384 Check in: 11.01.08 Reputation: 16 | I also noticed a bug in MK60.1-santoni-stable-v2.zip: 3G catches much worse, the reception is not very good at home, I go through all the rooms in the duet - the Internet still seems to be "E" and barely crawls. On the street it is clear on the "H" switches and more or less. I tried to install different modems - all the same. I put the line - everything is OK, at home it seems "H" and an adequate speed of 15-18 megabits. It is a pity however, but it will not work like this :( Post has been editeduncann - 01.07.17, 15:47 |
Message#39 01.07.17, 22:51 | |
Visitor [offline] Group: Users Messages 12 Check in: 14.10.10 Reputation: 0 | I found a solution to my problem - the inability to choose 4g only, 3g only - xposed and networkmode enabler! |
Message#40 01.07.17, 23:34 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1041 Check in: 15.07.13 Xiaomi Redmi 5 Plus 3/32 Reputation: 339 | Creating a swap file in order to increase the memory on our body. Mandatory presence of root The first thing we need is to download the program RAMEXPANDER  ROEHSOFT RAM Expander v3.64.apk(5.95 MB)Next, you need to install and go into it. Press the button: The optimal value. Next, in the dialog box, select the mode: I chose an online gamer, you can choose any value for you. After, choose the target destination, I chose the SD card. We are waiting for a couple of minutes while creating a 3GB file. Close the pop-up window. After that, in the main window will appear vmem size 2.93 GB. Well, this seems to be all .. According to my feelings, the body began to work faster, maybe it seems .. But in any case it will be useful. The total amount of memory has become: 4842mb. According to the testimony of RAMEXPANDER. Post has been editedwaiser - 01.07.17, 23:55 Reason for editing: Completed |
Message#41 03.07.17, 04:52 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 404 Check in: 25.03.12 Xiaomi Redmi 4X 2/16 Reputation: 32 | dangerouspkzm @ 07/03/17, 02:21 about the differences in autonomy in the line of Silent, it is possible that different results in connection with the work of one or two SIM cards? How much more is the second Simka eating? device with one sim. 2-3 days calmly holds. Yesterday I put the line on (I just have 2 SIM cards), it was 53% charge, I watched YouTube in the evening and shook the themes for 20 minutes, the night passed, and in the morning, too, for 10 minutes, now 49%. So xs, it seems to me in the event that something specifically eats the battery, it is necessary to track. I have another problem, with services Google-periodic message pops up services stopped. And when applying themes from the market, the manager of the themes constantly crashes, although it seems that the themes themselves are still applied. We will have a further look, otherwise I like it, finally it works as a vibrator in silent mode, and there is no such paranoid security system as a miui, in which to make some kind of vatsap work, you need to climb into a hundred thousand points and something there D Post has been editedx-one - 03.07.17, 05:01 Reason for editing: errors -------------------- MiuiPro | Android 7.1.2 |
| mobile version | Now: 04/29/19 05:50 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement