[X]Assistant

[obtim]

DiscussionAmbertek MD81S
Official site | Discussion пїЅ

Device description

MD81S Mini WiFi camera wireless type, designed to monitor the security of the premises, looking after the family, store, warehouse, office, small and medium enterprises.

Device characteristics

Video recording
Compression video format: H.264
Horizontal Definition: 480TVL
Video Format: AVI
Frame rate (FPS): 10fps + / - 1fps
Resolution: 640 x 480
Audio input: Built-in microphone
Record: cyclic
Activation of motion sensor recording
Remote camera connection and control
Network
Protocol: IP, P2P
IP Mode: Static IP Address
Mobile access: Android, iPhone OS, Windows Mobile
Motion Sensor
The inclusion of a mini-video camera is carried out when motion is detected within 5-8 meters. E-mail alert about sensor triggering.
Memory card
The camera saves video files to a microSD memory card of up to 32 GB, which allows you to store up to 24 hours of video!
Built-in battery
A 260mAh battery allows you to record video continuously for 1-1.5 hours. Extend the operating time by an external power source: DC 5V network or Power Bank.

Additional Information

Video instruction on connecting to a home Wi-Fi:
https://www.youtube.com/watch?v=GDbLt1JoVx0
IMPORTANT: this model can not send alerts to e-mail and write archive to FTP

• Before posting read the message Video section rules
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedgivlax - 14.04.17, 23:29

[obtim]

Question: What ports need to be forwarded on the router in order for the device to be accessible from the home network on Android devices via the plug2view application?

[leks2000]

I am trying to bring this miracle to the network, it works in LAN, but does not broadcast on the Internet.

[21andrey12]

[email protected], 09:43

I am trying to bring this miracle to the network, it works in LAN, but does not broadcast on the Internet.

How did you stream video in LAN?

[leks2000]

21andrey12 @ 05.28.17, 19:12

How did you stream video in LAN?

I registered a password from the Wi-Fi network in the notepad file, put it in the root of the card. plug2view.apk program was downloaded to the phone, I would like to connect it to the tinyCam program, but I can't get through the ip and protocol;

[21andrey12]

Leks2000 @ 05/29/2017, 11:32

...
I registered a password from the Wi-Fi network in the notepad file, put it in the root of the card. plug2view.apk program was downloaded to the phone, I would like to connect it to the tinyCam program, but I can't get through the ip and protocol;

The application is configured without problems. I wanted to get the stream on the URL inside lokalki

[leks2000]

I would also like, but alas, it does not work, if you suddenly find how to write here.

[obtim]

Some resources indicate that it supports the onvif standard. In practice, the Onvif Device Manager does not see it.
Website manufacturer filling for the camera -http://www.uipcam.hk
The developer already has three applications for the subject, the last of which is available in the market at this address:https: //play.google.co…s/details? id = x.p2p.cam
User's manual:https://minic.com.ua/a…kspluatatsii-mini.html

Post has been editedobtim - 23.06.17, 10:14

[logush2083]

camera shit. she does not write any alerts, does not sialize, she does not do anything at all. you can only write in real time and photos. does not see at night, the angle of view can not be called. but heats up and works. from jokes: to connect via the Internet, 3g, sd card must be inserted. without her only wan.

Post has been editedlogush2083 - 25.06.17, 23:19

[TT100T]

In this camera, the parts of the transistor of the resistors can diode or Conder if someone is disassembling for which they need it, thank you so much.

Attached images

[Serge_ISA]

obtimI managed to get to the camera with its software after pushing port 5000 on the router. And it connects without any authorization, so there’s no privacy at all.
By the way, the camera is constantly trying to connect to the Chinese address 114.119.7.33:8000, apparently for implementing WAN access. And taking into account that the login and password on the camera are not interchangeable, then how much privacy is there ...

Post has been editedSerge_ISA - 29.08.17, 10:53

[Fed-Zh]

Motion sensor can be configured to turn on the camera for a certain period of time? And then it turns on once and until the battery dies.

[Kosfed]

Also I suffer the second day. Settings reset to the plant already - through the cloud in any way. Inside the network, "native" programs on the Lan tab of the video I see. In the settings I see that the camera is connected to the Wi-Fi network, but sends packets of 92 bytes to 234.56.78.9. This address is not pinged. Therefore, the question is - can the video from this camera be watched by a third-party program, and not recommended?

[lopatino10]

the camera of this model is supported by the manufacturer for only a year through the Internet, then the server does not recognize it and only local computer remains
And about the stream, stream is a great Ketai secret, for everyone I tried and scored

[mav1creator]

Hello.

This camera fell into my hands with aliexpress, model md81s, board version - H50_REV1.2_WIFI 2013-10-23. How to watch the video through the LAN (I assigned it a static IP address with the help of the PC software "SYSM Monitor" that came with the camera), I understood it, everything works. I set up the camera so that it simultaneously wrote to the card and was automatically connected by the client via wi-fay to my router. The web muzzle, like the previous unsubscribers, also does not open - all because by default (or in general) it does not have a web muzzle. With the help of wireshark, it was possible to establish that the camera uses ports 5000 and 6280. Whether it has rtsp is a big question, and to find out the answer to this question, it is necessary to connect via ssh or at least telnet, which fails.

Only one thing remains - to connect via UART. I examined the board from both sides, I clearly see UART pins TX, 3V, GND, but I don’t see the RX. Under that radiator, as seen in the photo, there is no such contact either. Can anybody tell where is the RX ??? The loader is clearly in the 8-leg mikruh, its marking is C25Q64B.

I attach a photo

Attached images

[shurka1974]

mav1creator,
Is there any firmware for this flash C25Q64B? There is no reset button I can not reset to factory settings

[Dima]

Is there any firmware normal for this miracle?

[Madmaks81]

Tell me, the Wi-Fi does not turn on, all the diodes are constantly on, the phone does not see it

[telepuzik.2011]

Hi. Torn camera. Is there a chance to solder from the phone?

[Madmaks81]

Help to reanimate the MD 81s, when you turn on or charge, both LEDs are constantly on and no action is taken with it. Neither the computer nor the phone can not see it

[sharakiev]

1. The camera is badly latched ...
2. Quartz is defective especially that near the micro SD card reader
3 The wifi module is very hot It is possible to rewire a module similar to the old tablet I have a Realtek RTL8188 WI-FI module very often defective set up warming and not holding an image ...
https://skylots.org/65...efonov-noutbukov-kamer
4. This is a processor or flash memory.
5. very rarely flies firmware
http://sharakiev.narod.ru/anika_md81s.rar


Processor: ANYKA AK3751B
WI-FI REALTEK RTL8188 Module
FLASH nand, eprom Winbond C25Q64C, card microSD reader.