78 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Malaysk firmware for GU (RockChip PX3) MTCD Android 5.1.1 - Discussion
_Malay_
Message#1
11.04.17, 10:57
Killing machines
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3369
Check in: 17.08.10

Reputation:-  1442  +

Malaysk firmware for PG PX3 MTCD Android 5.1.1- Discussion
Discussion �
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

When flashing a device, you must understand all the risks.
Neither I nor the site administrationsavagemessiahzine.comNot responsible for your actions and, perhaps, dead devices!

Only for those who have access to the recovery (first try to get into it with key combinations and Reset, the possible options are lookingHERE ) !!!
How to find out if this firmware is suitable for your device
If you haveMTCDand processorRK3188, then this firmware is suitable for your device.
Only flash one dupdate.img file (without dmcu.img).
The card or flash drive must be formatted in

FAT32 download

!!
You can check all the data in Settings.

Attached Image

Attached Image

Attached Image

Installation method
Installation Method:
The card or flash drive must be formatted in FAT32 !!
For those who go with stock firmware or firmware of other authors:
1. Unzip the archive, write the file dupdate.img to the root of the SD card and insert the SD card into the slot of the device.
2. Go to the recovery and go down to the third point with data cleaning (update system / mcu from sdcard and clear all).
3. Wait until the installation is complete and, without waiting for the system to boot, go back into the recovery again.
4. Make Wipe Data (penultimate item)
5. Boot into the system. The first download can be very long.

When first installed, it will generate an error and go back to the reboot, the flashing will start again - this is normal (repartitioning the partitions)
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Firmware
If you like the firmware, then you can thank by going to myProfile.

What is added, changed, deleted:
Root is the latest SuperSU (hidden root access).
FUSE firmware (all internal memory is connected into one whole - it turned out 13.5 GB)
Removed trash (Chinese keyboards, Maps, and more)
Added programs - Root Explorer, ES File Explorer, TitaniumBackupPro
Four launchers to choose from (Settings - Desktop) + 4 in the OEM application
Settings - corrected Russian translation.
New item in Settings - System and Screen (here all new added items are located)
- Date and Time in the status bar
- screen density
- Sidebar with programs
- The speed of outgoing and incoming Internet status bar
- Change the font and its size of the system
- Blocking all advertising from the Internet
+ Settings for the developer are immediately displayed in Settings
+ Reworked the look of the equalizer.
+ Added reboot button and reboot in recovery in StatusBar
+ Optimization and fixes for 800X480 screen resolution (we unsubscribe from the problems, I do not have such a device)
+ Translation and graphic changes Factory settings
+ New Settings item - Display - StatusBar settings - Gradient status bar
+ In the OEM application, many programs, factory programs and new themes for the design of regular applications. Install as normal applications.Removing them later - go to Settings - Applications - Delete update.
+ Brightness slider added to notification curtain.
+ New radio, music, video (three different color themes) - Other colors are in the OEM application.
+ Added settings - flight mode, mobile data transfer, APN setting
+ New Settings - System - Startup
+ New Settings - Section Information
+ Changed Status Bar
+ Updated Google, Google Apps, Play Store
+ In the OEM application, many programs, factory programs and new themes for the design of regular applications. Install as normal applications. Delete - go to Settings - Applications - Delete update.
Do not forget - you can change the default launcher in Settings - Desktop.
Launcher with GPS speed. Launcher selection in Settings-Desktop - Launcher2mtc3_5_1_1. Activate the Xposed GPS-Launcher module and copy the desired mtc-launcher folder (KM-speed in kilometers, MPH-speed in miles) to the internal memory card (internal_sd) and reboot.
All additional programs and launchers can now be removed by standard methods in Settings - Applications.
+ A new icon (moon) has been added to the status bar to launch Screensaver.
+ Network card settings again appeared.
+ Added support for Init.d
+ Added binary i2cset file for sound.
The system / etc / init.d folder already contains the configuration file for changing the sound (i2cset -y 4 0x1A 0x25 0x01 and i2cset -y 4 0x1A 0x2C 0x60 are enabled by default) (it should have 0755 resolution after the change)
+ Added support for direct sound control from 7floor (in the OEM application there ismtcsound_7floor.apk , you will need to install it and remove the program Root Explorer file 33i2cset in folder system \ etc \ init.d )
+ Added KLD launcher (Launchers folder in OEM layout).
+ Added Weather in Screensaver, Radio, Music. You can customize the Weather - Settings - Weather Settings.
+ Translation in Factory Settings
+ Added PCRadio (can be deleted in Settings - Applications)
+ Added a new module for Xposed mtc-music (do not forget to copy the settings folder from the archive with firmware and activate the module in Xposed itself)
In folderCopy_TO_SD_External (GPS Card) - From KM - there are folders that show speed in kilometers per hour
In folderCopy_TO_SD_External (GPS Card) - From MPH - there are folders that show speed in MPH (US format)
+ Added various screensavers to the OEM application (analog and digital)
+ Display settings Weathers in the screensaver - Settings - Settings Weathers.
If you do not like the sound in the system - Delete the Root Explorer-om file in the system \ etc \ init.d \ 33i2cset folder
+ Now all folders with setup .ini files (mtc-launcher, mtc-music, mtc-statusbar) should be copied by the ES File Explorer program (available in the firmware)to internal memoryinternal_sd !!!
Made specifically for devices that do not have SD Maps (GPS Maps)
+ Added a fully working module for Xposed - mtc-keys (to change the key assignments on the device)
The configuration .ini file with the mtc-keys folder must be located on the external SD cardexternal_sd !!!
In the archive, along with the firmware, there is an approximate settings file, where by double-clicking the Back key, PCRadio starts (you need to delete the # sign in the [click.2] section).
Read about his settings here -Modification of software and decorations for GU MTCB / MTCC CPU RK3066 / 3188 - Discussion
+ In the OEM application added Launcher and Applications (many versions).
+ Added application MtcdTools to configure the keys on the device. (Located in the OEM application)
+ Installed the latest version of RTH access.
+ Added to the OEM application new regular applications in red and screensaver without displaying the speed of GPS
+ Changed the sound (except radio) (added bass and treble) if you do not like the sound, then delete the file\ system \ etc \ init.d \ 33i2cset
+ Redone applicationMTCBlueTooth - two-line contacts and two types of color theme - red (found in the OEM application) and blue (default)
+ Custom applications have been reworked - 3 color themes to choose from (blue, red, green) Blue by default, the rest are installed from the OEM application.
+ Reworked all screensavers to display tags and images. The weather is also moved up.
+ Added Weather display in the Radio application. You can configure or deactivate Settings - Weather Settings - Weather on the screen. You can change the color, icons, size, etc. Display Weather automatically by GPS and the Internet (you must enable Settings-GPS -Location - On for all sources) or set your city in manual mode. Selection of display Weather for two providers.
+ Added module for Xposed, to display tags in the screensaver -xposed-mtc-poweramp
+ Added a module for Xposed, to display information from PCRadio in a screensaver -xposed-mtc-pcradio
+ Added module for Xposed, for bluetooth application -xposed-mtc-bt-1.5 - read about him here
The shortcut settings are in the filemtc-bt / mtc-bt.ini where you yourself must register phone numbers.
IMPORTANT: If you synchronize the phone book with your phone - be sure to disable the modulemtc-bt in xposed and reboot. After synchronization, turn it on again! Otherwise, there will be no synchronization!
Added module for Xposed -xposed-mtc-manager - read about him here
The archive with the firmware are examples of settings in the foldermtc-manager . So if you copy a folder to the GPS map mtc-manager with file settings.ini then by default the screensaver will be launched in all applications (and not only in standard ones) in 300 seconds, here are the settings:
# Enable alternative screensaver, if false is specified, the regular mechanism will work:
screenClock = true
# the screen off time, if not specified, will be used from the standard settings in seconds:
screenTimeout = 300

If you want to turn it off completely, then we register:screenClock = false
If you want it not to run in certain applications, then write the package names in the configuration filess_exceptions.ini
com.microntek.avin
com.microntek.media
com.android.browser

Added module for Xposed -xposed-mtc-music-2.8 - read about him here
In order not to turn off the screensaver when you click on the MOON in the status bar, we write this in the filemtc-music / mtc-music.ini
# Turn off the screensaver only when you touch the screen. true - yes, false - normal operation.

touch_mode = true


-----------------------------------------------------------------------------
New from April 10, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware # 11
+ Updated Google Services
+ Added three new themes for regular applications, red, green, blue with the quick access panel
(the default is a blue theme - the rest are in the OEM application)
+ Added new Settings. Now you can fully customize the icons in the statusbar. Located in Settings - Screen.
When you first start the system after patching, you will have nothing in the StatusBar (not a single icon!)
Settings - Screen - StatusBar Settings - Show-Hide icons in the StatusBar and there we include what you need.
+ Added new screensaver with quick access toolbar (you can immediately launch regular applications)
+ Fixed display of the color palette in Settings - Screen - Settings Bar Status - Gradient Bar Status.
If there are errors like "An error has occurred Lock.apk", then go Settings - GPS - Location - For all sources !!
If you do not like the sound in the system - Delete the Root Explorer-om file in the system \ etc \ init.d \ 33i2cset folder
Added new Xposed module mtc-radio, to show the names of radio stations. The configuration file is in the folder
mtc-radio / mtc-radio.ini which needs to be copied to internal memory internal_sd (available in the archive with the firmware)
You need to register the frequencies of your radio stations in the mtc-radio.ini file in your city (information can be found on the Internet)
and be sure to turn off the RDS display in Settings - Factory settings - Other !!!
Download:https://yadi.sk/d/8vwE8PLJ3GoA2M
-----------------------------------------------------------------------------

New from April 13, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware # 11.1

Google services are replaced by MicroG (it is recommended to install this firmware without erasing data
(or make Wipe Data in recovery after installing the firmware)
1. go to the microG Settings application and activate background services:
- Register your device with Google
- Google Cloud Messaging
2. In the same place, select the UnifiedNlp settings and select (if you use only GPS, you can skip this):
- location programs (just select one, which one you like more), so that the network search will work
- address search programs - tick Nominatim (coordinate transformation to address)
3. reboot the device
4. Go to the Play Market and enter your account.
We use.
Download:https://yadi.sk/d/LgE6zhfR3GvHgf
-----------------------------------------------------------------------------

New from April 18, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware # 11.4

Added four versions of Launcher:
1. Launcher with GPS speed and weather (main)
2. Launcher with GPS speed and WITHOUT showing the Weather (change launcher in Settings - Desktop)
3. Launcher without GPS speed and with analog clock (change launcher in Settings - Desktop)
4. Launcher without GPS speed and with digital clock (change launcher in Settings - Desktop)
Added a set of full-time programs without showing the top panel and without Weather. (Located in the OEM application)
The gps-launcher module has been redesigned to show the speed in two launchers.
Other corrections and additions.
Download:https://yadi.sk/d/rRVYL92R3H6wdJ
-----------------------------------------------------------------------------

New from April 24, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware # 11.5

1. Fixed a launcher with GPS speed and WITHOUT displaying Weather for 800X480 screen resolution
2. Now all programs are available on Google Play with no exceptions (including TomTom)
3. Fixed the widget for the Radio application in Launchers with an analog clock and a digital clock
4. TomTom navigation works immediately and downloads maps.
5. Reduced the height of the Status Bar.
6. At the first boot after flashing, there are now icons in the status bar.
Two versions of firmware with MicroG services and the official version of Google Service.
Download the version with the official Google Market:https://yadi.sk/d/HYOsUi1F3HJ9Y5
Download the MicroG version:https://yadi.sk/d/LXl9hJoy3HKZmJ
-----------------------------------------------------------------------------

New from September 7, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware # 12.6
1. Android base dated August 09, 2017 (factory firmware HA)
2. Updated all Google Services
3. Installed the latest version of SuperSU (hidden Root access)
4. New PCRadio with a new module for Xposed from SW. MVG-V70 (now when starting regular programs, the sound of PCRadio is turned off)
5. New screensaver 2 in 1. With analog and digital clock. Change screen - click on it for 2-3 seconds.
6. The startup time of the Never-15-30-60 seconds-2-3-5-7-10 minutes has been added to the screensaver’s launch settings.
7. New Radio with a quick access panel (installed) and without a panel (in the OEM application)
8. In the Music application, a ViperFX launch button and track numbers with a quick access panel (installed) and without a panel (included in the OEM application) have been added
For ViperFX to work correctly when the Music application is running, disable the graphic equalizer there.
9. Added new module for Xposedmtc-bt version 2.3 (version 1.5 was on previous firmware)
If, after synchronizing contacts with your phone, you didn’t have anything, just exit the Bluetooth application (for example, using the Back key) and go back to it, all contacts will appear. Now disable the module in Xposed is not necessary.
And do not forget to edit the filemtc-bt.ini (Lies in the archive with the firmware) and register phones for quick access there.
10. Added new module for Xposedxposed-mtc-manager version 2.5 (on the previous firmware version 1.13 was)
You can read about its settingshere
Copy foldermtc-manager on external memory card (GPS map) - everything is in the archive with the firmware, just edit the configuration files for yourself in the program Notepad ++
Now you can connect any OBD adapters with different names, register them in the filesettings.ini .
Do not forget who does not need to launch a screensaver, then disable it not only in the Android Settings but also in the filesettings.ini in folder mtc-manager - screenClock = false
# Enable alternative screensaver, if false is specified, the regular mechanism will work:
screenClock = false
# screen off time, if not specified, the value from the default settings will be used:
screenTimeout = 260
# screensaver software package name
screenPackage = com.microntek.screenclock
# name screensaver activator
screenClass = MainActivity
# if the package name and activation are not set, then the standard screensaver will be used

Sound is restored (high and low frequencies are raised) If you don’t like sound in the system - Delete the Root Explorer-om file in the system \ etc \ init.d \ 33i2cset folder
Fixed translation - on and off.
Init.d restarted
Other additions and fixes.

Firmware install must remove all data (Wipe Data) !!!!

Do not forget to copy the folders gps-launcher, mtc-launcher, mtc-music, mtc-radio to the root of the internal memoryinternal_sd , and the folder mtc-manager in the root of the external SD card external_sd and activate modules in xposed.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Version with official Google Market:
Download the version with the official Google Market:https://yadi.sk/d/bBIUME4_3Mft2r
MicroG Version:
Download the MicroG version:https://yadi.sk/d/ZZJ2vX0e3MftdK
------------------------------------------------------------------------------------

New from July 9, 2018 for RK3188 800X480 and 1024X600 MTCD Firmware # 13
1. New versions of Music - are in the OEM application.
2. In Settings, added item - Screen lock.
3. New screensavers with graphic equalizer (included in the OEM application)
4. New PCRadio - in a transparent style from SW. DUK.
5. New screensaver 2 in 1. With analog and digital clock. Change screen - click on it for 2-3 seconds. (set by default)
6. New Radio with a quick access panel (installed) and without a panel (in the OEM application)
7. In the Music application, a Vis launch button has been added with a choice of a graphic equalizer with a quick access panel (installed) and no panel (included in the OEM application)
8. Correct reboot (including MCU) of the device from the StatusBar (many thanks to svasavagemessiahzine.comfor help)
9. Reduced the volume of the bluetooth call.
10. In the OEM application, Live Wallpapers - Planets have been added (you can try to install them, it will be cool to look in transparent versions of Screensaver, Music and Radio :))
11. Other additions and corrections.

Firmware install must remove all data (Wipe Data) !!!!

Do not forget to copy the mtc-launcher, mtc-music, mtc-radio folders to the internal_sd internal memory root, leave other folders on the external SD (external_sd) and activate the modules in Xposed.
Version with official Google Market:
Download the version with the official Google Market:https://yadi.sk/d/S-HQ3I9N3YxRgj
MicroG Version:
Download the MicroG version:https://yadi.sk/d/uJPHkAKB3YxRkG
If you like the firmware, then you can thank by going to myProfile.

Instructions
Connecting Google account on firmware with MicroGHERE
We read about the settings of the modules for XposedHERE
Instructions for connecting modules Xposed -HERE
Examples of writing in Settings - Date and time - Custom JAVA format
Examples of writing in Settings - Date and time - Custom JAVA format for display in the status bar.

Examples:

dd.MM.yyyy - 04/17/2016
dd / MM / yyyy - 04/17/2016
dd MMMM yyyy - April 17, 2016
dd MMMM - April 17
EEEE, dd MMMM - Tuesday, April 17
HH: mm: ss - 20:33:30
K: mm a - 4:45 PM

date

D (day of the year) - 199

E / EE / EEE (day of the week) - W
EEEE (day of the week) - Tuesday
EEEEE (day of the week) - At

F (day of the week in the month) - 2 (2nd week of July)
FF (day of the week in the month) - 02 (2nd week of July)

G (era) - N.E.

L (autonomous month) - 1
LL (autonomous month) - 01
LLL (Offline Month) - Jan
LLLL (Offline Month) - January
LLLLL (offline month) - I

M (months in a year) - 1
MM (months in a year) - 01
MMM (months in a year) - Jan
MMMM (months in a year) - January
MMMMM (months in a year) - I

W (weeks in a month) - 2
WW (weeks in a month) - 02

c / cc / ccc (autonomous day of the week) - W
cccc (autonomous day of the week) - Tuesday
ccccc (autonomous day of the week) - At

d (days in the month) - 1
dd (days in a month) - 01

w (weeks in a year) - 9
ww (weeks in a year) - 09

yy (year) - 16
y / yyy / yyyy (year) - 2016

Time

H (hours in the bottom: 24) - 3
HH (hours in the bottom: 24) - 03

K (am / pm: 12) - 1
K (am / pm: 12) - 01

S (milliseconds) - 700

h (am / pm: 12) - 3
hh (am / pm: 12) - 03

k (hours in the bottom: 24) - 7
kk (hours in the bottom: 24) - 07

m (minutes per hour) - 5
mm (minutes per hour) - 05

s (seconds in a minute) - 5
ss (seconds in a minute) - 05

a (am / pm marker) - PM

z / zz / zzz (time zone) - CTB
zzzz (time zone) - Pacific Standard Time

Z / ZZ / ZZZ (time zone RFC 822) - 0800
ZZZZ (time zone RFC 822) GMT-08: 00
ZZZZZ (time zone RFC 822) - 08:00

'(escape character for text) -'Date ='

'' (quotation mark) - 'o''clock'


Useful applications


Post has been editedMalaysk - 09.07.18, 19:07
_Malay_
Message#2
31.05.16, 18:42
Killing machines
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3369
Check in: 17.08.10

Reputation:-  1442  +

Old version of the main message
I made the firmware for myself, so do not forget -When flashing a device, you must understand all the risks.
Neither I nor the site administrationsavagemessiahzine.comNot responsible for your actions and, perhaps, dead devices!


Only for those who have access to the recovery (first try to get into it with key combinations and Reset, the possible options are lookingHERE ) !!!

How to return to stock firmware

Installation method :
1. Unzip the archive, write to the root of the SD card filedupdate.imgand insert the SD card into the slot of the device.
2. Enter recoveryand go down to the third item with data cleansing (update system / mcu from sdcard and clear all ).
3. Wait until the installation is complete and, without waiting for the system to boot, go back into the recovery again.
4. MakeWipe Data(penultimate item)
5. Boot into the system. The first download can be very long.


When first installed, it will generate an error and go back to the reboot, the flashing will start again - this is normal (repartitioning the partitions)

Do not forget to make Wipe Data from recovery (penultimate item)

Root embedded
FUSE firmware (all internal memory is connected into one whole - it turned out to be 13.5 GB) - many people thank you for their advice and assistance.booroondook
Removed trash (Chinese keyboards, Maps, and more)
Added programs - Root Explorer, ES File Explorer Pro 1.0.4_mod, TitaniumBackupPro
Two launchers to choose from (Settings - Desktop)
Settings - corrected Russian translation.
New item in Settings - System (here all new added items are located)
- Date and Time in the status bar
- screen density
- Sidebar with programs
- The speed of outgoing and incoming Internet status bar
- Change the font and its size of the system
- Blocking all advertising from the Internet
Developer settings are immediately displayed in Settings
Reworked the look of the equalizer.
Radio application reworked
Reworked the entire status bar
Added reboot button and reboot in recovery in status bar
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Fixed a status bar error occurring when changing the system language.
Optimization and fixes for the screen resolution of 800X480 (unsubscribe from the problems, I do not have such a device)
Translation and graphic changes Factory settings
New item Settings - System - Gradient status bar (see screenshots)
There are a lot of programs in the OEM application, factory programs and new themes for regular applications. Install as normal applications.Delete - go to Settings - Applications - Delete update.
KingoRoot replaced by SuperSU (hidden root access)
Brightness slider added to notification curtain.
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

New radio, music, video (three different color themes) - Other colors are in the OEM application.
Added settings - flight mode, mobile data transfer, APN setting
New Settings - System - Startup
New Settings - Screen - Configure Notifications
New Settings - Partition Information
Changed Status Bar
Updated Google, Google Apps, Play Store
Changing permissions for programs that are now all available in Play Markete (some wrote before this is not supported on this machine)
Cheating apps and canbass application for 800x480 screen resolution
There are a lot of programs in the OEM application, factory programs and new themes for regular applications. Install as normal applications. Delete - go to Settings - Applications - Delete update.
Do not forget - you can change the default launcher in Settings - Desktop.
[/ b]
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image

Launcher with GPS speed. Launcher selection in Settings-Desktop - Launcher2mtc3_5_1_1. Activate the Xposed GPS-Launcher module and copy the desired mtc-launcher folder (KM-speed in kilometers, MPH-speed in miles) to the GPS memory card (External_SD1) and reboot.
Fixed the choice of applications for navigation. Now, after selecting a program, it will immediately be launched.
All additional programs and launchers can now be removed by standard methods in Settings - Applications.
A new icon (moon) has been added to the status bar to launch Screensaver. You can configure it in the ScrinseverClock program (the clock itself, color, size, weather, etc.)
Added new module for Xposed - mtc-statusbar (do not forget to activate it in Xposed). Its settings are located in the mtc-statusbar folder and are called status_bar.ini.
This folder must be copied to the SD card sd_external (GPS CD-card). The folder is included in the archive. Here are its settings that you can configure:
status_bar.ini
[hide]
# Show / Hide entire StatusBar
# Show / Hide all statusbar
# true - Hide: false - Show
# true - Hide: false - Show
status_bar = false
#--------------------------------------------------
# Show / Hide Home button
# Show / Hide Home button
# true - Hide: false - Show
# true - Hide: false - Show
home = true
#--------------------------------------------------
# Show / Hide app
# Show / Hide Applications
# true - Hide: false - Show
# true - Hide: false - Show
app = false
#--------------------------------------------------
# Show / Hide screenshot button
# Show / Hide Screenshots button
# true - Hide: false - Show
# true - Hide: false - Show
screenshot = false
#--------------------------------------------------
# Show / Hide Back button
# Show / Hide Back button
# true - Hide: false - Show
# true - Hide: false - Show
back = true
#--------------------------------------------------
# Show / Hide volume panel
# Show / Hide volume icon
# true - Hide: false - Show
# true - Hide: false - Show
volume = true
#--------------------------------------------------
# Show / Hide eject DVD icon
# Show / Hide DVD Extend Icon
# true - Hide: false - Show
# true - Hide: false - Show
eject = true
#--------------------------------------------------
Show / Hide screen brightness icon in statusbar
# Show / hide dimming icon
# true - Hide: false - Show
# true - Hide: false - Show
screenbrightness = true
#--------------------------------------------------
# Power icon
# Reload Icon
# true - Hide: false - Show
# true - Hide: false - Show
syslock = false
#--------------------------------------------------
# Show / Hide screensaver button
# Show / Hide the Screensaver icon (Moon) in the StatusBar
# true - Hide: false - Show
# true - Hide: false - Show
deskclock = false
#--------------------------------------------------
# Show / Hide name of the running program
# Show / Hide the name of the running program
# true - Hide: false - Show
# true - Hide: false - Show
notification_lights_out = false
#--------------------------------------------------
# Show / Hide icons running services in statusbar
# Show / Hide icons of running services
# true - Hide: false - Show
# true - Hide: false - Show
notificationIcons = false
#--------------------------------------------------
# Show / Hide system icons (eg WiFi, GPS, 3G and other)
# Show / Hide system icons (for example, WiFi, GPS, 3G and others)
# true - Hide: false - Show
# true - Hide: false - Show
system_icon_area = false
#--------------------------------------------------

Added the latest version of ViPER FX (launch Settings - ViPER FX)
Added the last jetAudio completely redone by me. (can be deleted in Settings - Applications)
Removed hidden RTH access and installed the latest SuperSU (some programs worked incorrectly with hidden root)
Fixed replacement of the system font in Settings - System - Font selection.
Fixed setting of notifications in Settings - Screen.
Network card settings again appeared.
Added support for Init.d
Added binary i2cset file for sound (thanks to Kumarai)
The system / etc / init.d folder already contains the configuration file for changing the sound (i2cset -y 4 0x1A 0x25 0x01 and i2cset -y 4 0x1A 0x2C 0x60 are enabled by default) (it should have 0755 resolution after the change)
NEW from October 16, 2016. Firmware number 7.5
+ Fixed speed widget on GPS
+ Fixed work of 3G modems
+ Added support for direct sound control from 7floor (in the OEM application there ismtcsound_7floor.apk , you will need to install it and remove the program Root Explorer file 33i2cset in folder system \ etc \ init.d )
+ Added applications Radio, Music, Bluetooth, DVD from SW.AlexNikolaev with his permission to the OEM application.
+ Added KLD launcher.
+ Added Weather in Screensaver, Radio, Music. You can customize the Weather - Settings - Weather Settings.
+ Translation in Factory Settings
+ Added PCRadio (can be deleted in Settings - Applications)
+ Other fixes.

Screenshots:
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

NEW from October 23, 2016. Firmware number 8
Android base from September 27, JY
Fixed the work of the module XposedVolumeBar
Added a new module for Xposed mtc-music (do not forget to copy the settings folder from the archive with firmware and activate the module in Xposed itself)
In folderCopy_TO_SD_External (GPS Card) - From KM - there are folders that show speed in kilometers per hour
In folderCopy_TO_SD_External (GPS Card) - From MPH - there are folders that show speed in MPH (US format)
Added various screensavers to the OEM application (analog and digital)
Setting display Weather in the screensaver - Settings - Settings Weather.
A bunch of other additions and fixes.
If you replace the MTCManager file from the old firmware, the screensaver and the XposedVolumBar module will not work
If you do not like the sound in the system - Delete the Root Explorer-om file in the system \ etc \ init.d \ 33i2cset folder
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

NEW from December 18, 2016. Firmware number 9
Just a gigantic job was done within 2 months from the release of firmware number 8. I want to express special appreciation to the people who helped make the world brighter :):
For a huge contribution to the finalization of modules for Xposed for MTCD devices -MVG-V70
For adding the program MtcdTools - XDA forum and application authorf1x
For the presented launchers in the OEM application with changed names -booroondook
For red and green color applications are in the OEM application -AlexNikolaev
1.Android base from November 22, 2016
2. Fixed Google Play
3. Now all folders with setup .ini files (mtc-launcher, mtc-music, mtc-statusbar) should be copied by the ES File Explorer program (available in the firmware)to internal memoryinternal_sd !!!
Made specifically for devices that do not have SD Maps (GPS Maps) We look at the screenshot
Attached Image


4. In the Xposed mtc-statusbar module (status_bar.ini), a status bar height adjustment has been added
[statusbar]
height.id = status_bar_height
# height bar status
# the height of the status bar
height.value = 55

5. Added a fully working module for Xposed - mtc-keys (to change the key assignments on the device)
The configuration .ini file with the mtc-keys folder must be located on the external SD cardexternal_sd !!!
In the archive, along with the firmware, there is an approximate settings file, where by double-clicking the Back key, PCRadio starts (you need to delete the # sign in the [click.2] section).
Read about his settings here -Modification of software and decorations for GU MTCB / MTCC CPU RK3066 / 3188 - Discussion
6. Added new versions of Radio, Music, Video.
7. In the OEM application, added Launchers and Applications (many versions) and fixed the work of the Music application.
8. Added application MtcdTools to configure the keys on the device.
9. Changed the factory settings for a normal display in the resolution of 1024x600.
10. Fixed clock in the retractable curtain.
11. Installed the latest version of RTH access.
12. A huge number of other fixes and additions.

NEW January 15-18, 2017. Firmware number 9.6 and 9.7
+ Android base from December 22, 2016
+ Added to the OEM application new regular applications in red and screensaver without displaying the speed of GPS
+ A bunch of other fixes and additions - honestly reluctant to write :)

Download version9.6 (regular sound):https://yadi.sk/d/qjyZdCLA39Astm

+ Changed the sound (except radio) (added bass and treble) if you do not like the sound, then delete the file\ system \ etc \ init.d \ 33i2cset
+ Fixed new applications for 800X480 screen resolution
+ Redone applicationMTCBlueTooth - two-line contacts and two types of color theme - red (found in the OEM application) and blue (default)

NEW from January 29, 2017.Firmware number 10
Fixed WiFi Direct
The standard applications were altered - 3 color themes to choose from (blue, red, green) Blue by default, the rest are installed from the OEM application.
All screensavers have been redesigned to display tags and images. The weather is also moved up.
Added display of Weather in the Radio application. You can configure or deactivate Settings - Weather Settings - Weather on the screen. You can change the color, icons, size, etc. Display Weather automatically by GPS and the Internet (you must enable Settings-GPS -Location - On for all sources) or set your city in manual mode. Selection of display Weather for two providers.
Added module for Xposed, to display tags in the screensaver -xposed-mtc-poweramp
Added module for Xposed, to display information from PCRadio in the screensaver -xposed-mtc-pcradio
Added module for Xposed, for bluetooth applications -xposed-mtc-bt-1.5 - read about him here
The shortcut settings are in the filemtc-bt / mtc-bt.ini where you yourself must register phone numbers.
IMPORTANT: If you synchronize the phone book with your phone - be sure to disable the modulemtc-bt in xposed and reboot. After synchronization, turn it on again! Otherwise, there will be no synchronization!
Added module for Xposed -xposed-mtc-manager - read about him here
The archive with the firmware are examples of settings in the foldermtc-manager . So if you copy a folder to the GPS map mtc-manager with file settings.ini then by default the screensaver will be launched in all applications (and not only in standard ones) in 300 seconds, here are the settings:
# Enable alternative screensaver, if false is specified, the regular mechanism will work:
screenClock = true
# the screen off time, if not specified, will be used from the standard settings in seconds:
screenTimeout = 300

If you want to turn it off completely, then we register:screenClock = false
If you want it not to run in certain applications, then write the package names in the configuration filess_exceptions.ini
com.microntek.avin
com.microntek.media
com.android.browser

Added module for Xposed -xposed-mtc-music-2.8 - read about him here
In order not to turn off the screensaver when you click on the MOON in the status bar, we write this in the filemtc-music / mtc-music.ini
# Turn off the screensaver only when you touch the screen. true - yes, false - normal operation.

touch_mode = true




Download version10 with modified sound(added bass and treble):https://yadi.sk/d/3-ajQr753BWxav

NEW from February 21, 2017.Firmware number 10.
+ Android base from February 9, 2017
+ Updated Google Services
+ Added three new themes for regular applications, red, green, blue -8 with a shortcut bar
(the default is a blue theme - the rest are in the OEM application)
+ Removed module Xposed - StatusBar (if you install the firmware update (without Vip Date),
then go to Settings - Applications and there remove the module StatusBar)
+ Added new Settings. Now you can fully customize the icons in the statusbar. Located in Settings - Screen.
+ Added new screensaver with quick access toolbar (you can immediately launch regular applications)
+ Fixed display of the color palette in Settings - Screen - Settings Bar Status - Gradient Bar Status.
+ ViperFX
+ Many other additions and bug fixes.

If there are errors like "An error has occurred Lock.apk", then go Settings - GPS - Location - For all sources !!
If you do not like the sound in the system - Delete the Root Explorer-om file in the system \ etc \ init.d \ 33i2cset folder

Download version10.8 with modified sound(added bass and treble):https://yadi.sk/d/IUXt0orh3ELHtS
________________________________________________________________________________________________
You can download the latest firmware versions.if you look at my profile. There are links to firmware. On this
moment last updated version fromApril 10th # 11
andApril 18th # 11.4 with MicroG. Carefully read the fileWhat news.txt, which is in the archive with the firmware.

If you like the firmware, then you can thank by going to myProfile.
----------------------------------------------------------------------------------------------------------------------------
Examples of writing in Settings - Date and time - Custom JAVA format for display in the status bar.

Examples:

dd.MM.yyyy - 04/17/2016
dd / MM / yyyy - 04/17/2016
dd MMMM yyyy - April 17, 2016
dd MMMM - April 17
EEEE, dd MMMM - Tuesday, April 17
HH: mm: ss - 20:33:30
K: mm a - 4:45 PM

date

D (day of the year) - 199

E / EE / EEE (day of the week) - W
EEEE (day of the week) - Tuesday
EEEEE (day of the week) - At

F (day of the week in the month) - 2 (2nd week of July)
FF (day of the week in the month) - 02 (2nd week of July)

G (era) - N.E.

L (autonomous month) - 1
LL (autonomous month) - 01
LLL (Offline Month) - Jan
LLLL (Offline Month) - January
LLLLL (offline month) - I

M (months in a year) - 1
MM (months in a year) - 01
MMM (months in a year) - Jan
MMMM (months in a year) - January
MMMMM (months in a year) - I

W (weeks in a month) - 2
WW (weeks in a month) - 02

c / cc / ccc (autonomous day of the week) - W
cccc (autonomous day of the week) - Tuesday
ccccc (autonomous day of the week) - At

d (days in the month) - 1
dd (days in a month) - 01

w (weeks in a year) - 9
ww (weeks in a year) - 09

yy (year) - 16
y / yyy / yyyy (year) - 2016

Time

H (hours in the bottom: 24) - 3
HH (hours in the bottom: 24) - 03

K (am / pm: 12) - 1
K (am / pm: 12) - 01

S (milliseconds) - 700

h (am / pm: 12) - 3
hh (am / pm: 12) - 03

k (hours in the bottom: 24) - 7
kk (hours in the bottom: 24) - 07

m (minutes per hour) - 5
mm (minutes per hour) - 05

s (seconds in a minute) - 5
ss (seconds in a minute) - 05

a (am / pm marker) - PM

z / zz / zzz (time zone) - CTB
zzzz (time zone) - Pacific Standard Time

Z / ZZ / ZZZ (time zone RFC 822) - 0800
ZZZZ (time zone RFC 822) GMT-08: 00
ZZZZZ (time zone RFC 822) - 08:00

'(escape character for text) -'Date ='

'' (quotation mark) - 'o''clock'





Instructions for connecting modules Xposed -HERE

.

Post has been editedMalaysk - 19.04.17, 18:21
Spike_kgz
Message#3
09.04.17, 09:32
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1794
Check in: 08.11.09
Xiaomi Redmi 4X 3/32

Reputation:-  145  +

Luciano8 @ 08.04.17, 20:16*
Put on malaysk 10.8, everything works!
the processes no longer hang Google services
increase in the speed of gu work is noticeable
The problem of the "disappearance" of Google did not encounter
happy with everything! Thanks for the patch!

I confirm. Put on a clean malaysk 10.8 - everything works. Play market did not fall off.

Posted 09/04/2017 09:35:

I will try again to ask about ViperFX. The problem is as follows:

ViperFX whenloadingGU starts normally, nothing falls off. In the status there is an icon that it is running. BUT!As soon as GU goes to sleep,then upon waking up, ViperFX falls off, the status icon is not visible, and accordingly the sound changes for the worse. It is necessary to run every time manually. How to cure it?

Has anyone come across this?
mass5
Message#4
09.04.17, 13:24
Visitor
**
[offline]

Group: Active users
Messages 27
Check in: 07.03.08

Reputation:-  0  +

Question to the distinguished Malaysk:
GU with your latest firmware 4.4
received from China just such a parcel (write works with Andrew 4.3 and above)
VT GU does not want to see this device, the phone (S7 sees the gathering, iPhone too)
The tablet (Andr. 4.4) also does not see. I installed firmware 5.1 (there were hopes that something would change), but everything remained in its place.

and the second question: can I flash your latest 5.1 (only the GU does not understand the dupdate.img file)
s_artur
Message#5
09.04.17, 16:23
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2441
Check in: 31.08.07

Reputation:-  73  +

* Spike_kgzin the whitelist.ini file of the mtc-manager module.
How it is and where it is read in the module description. I don’t remember
andspb78
Message#6
09.04.17, 19:45
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 06.01.11

Reputation:-  3  +

Dear Malaysk has released a new version of its firmware. Description and link available on xda.
stevks
Message#7
09.04.17, 22:11
Novice
***
[offline]

Group: Active users
Messages 35
Check in: 13.12.14

Reputation:-  1  +

And how is the new firmware 11? Faster or just blunting ??? Maybe someone managed to put :)

Post has been editedstevks - 09.04.17, 22:11
T_33
Message#8
09.04.17, 23:12
User
****
[offline]

Group: Banned
Messages 56
Check in: 17.01.17

Reputation:-  1  +

And how is the new firmware 11? Faster or just blunting ??? Maybe someone managed to put


My 10th is not stupid. 200-300 meters of free space always. What do you have there tupit I do not even know.
kumarai
Message#9
09.04.17, 23:15
Guru
*********
[offline]

Group: Moderators
Messages 3115
Check in: 25.02.11
Oneplus 5 6/64

Reputation:-  586  +

T_33 @ 9.04.17, 23:12*
My 10th is not stupid. 200-300 meters of free space always.

TaskKiller android is configured so that in any case everyone will have 200-300 meters always free! Regardless of the installed programs and their quantity.
T_33
Message#10
09.04.17, 23:27
User
****
[offline]

Group: Banned
Messages 56
Check in: 17.01.17

Reputation:-  1  +

Kumarai @ 04/09/17, 23:15*
TaskKiller android is configured so that in any case everyone will have 200-300 meters always free! Regardless of the installed programs and their quantity.


Yes to me on the drum, to be honest, these free meters. I do not notice the brakes, as well as all the glitches there, the interface for me, nothing lags. What else do you need from the radio? I do not put all kinds of mura, I don’t play toys like some here.
Altabum
Message#11
10.04.17, 06:03
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 70
Check in: 13.01.17

Reputation:-  1  +

Andspb78 ​​@ 04/09/17, 23:45*
Dear Malaysk has released a new version of its firmware. Description and link available on xda.


Where is it? Throw a link please to the new firmware ...
OlegSkugarov
Message#12
10.04.17, 06:28
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 418
Check in: 05.12.10
Xiaomi Redmi 3S

Reputation:-  11  +

Altabum @ 04/10/17, 1:03 PM*
Where is it? Throw a link please to the new firmware ...

https: //forum.xda-deve…s-mtcd-device-t3385309


--------------------
PX3 2G Hal9k Mod v2.5
OlegSkugarov
Message#13
10.04.17, 06:33
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 418
Check in: 05.12.10
Xiaomi Redmi 3S

Reputation:-  11  +

andr91 @ 04/10/17, 13:28*
Thank you, plus sign.

Thanks for the plus sign, but sign off with the brakes ... Especially in the first minutes after loading ..


--------------------
PX3 2G Hal9k Mod v2.5
kumarai
Message#14
10.04.17, 07:19
Guru
*********
[offline]

Group: Moderators
Messages 3115
Check in: 25.02.11
Oneplus 5 6/64

Reputation:-  586  +

Malaysk firmware for GU RK3188 MTCD Android 5.1.1- Discussion
Discussion �
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Drivers and Utilities

Firmware
Instructions

miscellanea


There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.

Post has been editedkumarai - 10.04.17, 23:26
Hal9k
Message#15
10.04.17, 08:49
Developer
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 2744
Check in: 12.07.11

Reputation:-  638  +

OlegSkugarov @ 04/10/17, 06:33*
as there with the brakes.

There are no system changes compared to 10.8, but several stock applications and some previously added third-party applications have been removed.
This will allow the device to breathe more freely.


--------------------
T_33
Message#16
10.04.17, 09:39
User
****
[offline]

Group: Banned
Messages 56
Check in: 17.01.17

Reputation:-  1  +

OlegSkugarov @ 04/10/17, 06:33*
Especially in the first minutes after loading ..


And what do the first minutes give to you ?! This is from the delirium that linups is loaded faster than Windows ?!
Spike_kgz
Message#17
10.04.17, 10:39
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1794
Check in: 08.11.09
Xiaomi Redmi 4X 3/32

Reputation:-  145  +

s_artur @ 04/09/17, 20:23*
in the whitelist.ini file of the mtc-manager module.

It helped. Now it works as it should. Thank.
andspb78
Message#18
10.04.17, 10:58
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 06.01.11

Reputation:-  3  +

* Malaysk,Many thanks for the firmware and especially for the mtc-radio module. : thank_you:
stevks
Message#19
10.04.17, 11:42
Novice
***
[offline]

Group: Active users
Messages 35
Check in: 13.12.14

Reputation:-  1  +

Installing the replacement patch for Google Play Services on microG?
Will a patch without glitches work at 10.8?
kumoha33
Message#20
10.04.17, 13:58
Novice
***
[offline]

Group: Active users
Messages 36
Check in: 09.01.13
Apple iPhone SE

Reputation:-  0  +

Good afternoon, will this firmware work on this device? Tell me please))
MTCD_MX_v2.01_1

Attached images
Attached Image


Post has been editedkumoha33 - 10.04.17, 14:03


--------------------
The signature should not exceed 300 characters and have no more than 3 lines of text.
Krolikk
Message#21
10.04.17, 14:16
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 311
Check in: 02.12.13
Samsung Galaxy S7 SM-G930

Reputation:-  7  +

* kumoha33,
Hi, there will be.


--------------------
ASUS X555LD
Samsung Galaxy S7 SM-G930F
OrangePI Win Pro Plus

78 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/30/19 13:30