Mi Band Master - A wonderful application to work with the Mi Band smart bracelet and Mi Scale smart scales. Unimaginable functionality, interesting design, huge potential - all this is collected in the MBM. Now you can use the Mi Band to the maximum!

Pedometer, pulse meter, sleep analysis, smart alarm clock, use of a button (Mi Band 2), full music management (Mi Band 4), notifications of calls, SMS and applications (it is possible to put different notifications on different contacts, applications and even on different people in messengers), displaying information on the screen (messages, caller name), detailed settings, loading of firmware / dials, weather - only a small part of all MBM features.

Mi Band Master can work with all versions of the Mi Band 1 / 1A / 1S / 2/2 HRX / 3/3 NFC / 4/4 NFC and Mi Scale 1/2 bracelet, as well as with the original Mi Fit application or without it.

Download Mi Band Master and experience all the features of the application and the Mi Band smart bracelet!

Before writing a review or a letter with a question / error / problem, read the FAQ, which is located on the Settings page. It is very likely that you will find the answer there.

TRANSFER:
Please help me translate the program into your language.http://mbm.blacknote.top/lang/projects/4

1. Why do phone disconnects with a bracelet often occur?
- You need to turn off the phone’s power saving (including third-party programs like Greenify), sometimes adding a program to the exceptions is not enough. Fix the program in memory so that it does not unload (it is not on all firmware, it is definitely on MIUI). Allow the program to work in the background. (also not on all firmware, on Flyme there is). Add the program to autoload if this is not done automatically on your system. Other programs for the Mi Band, which work simultaneously with the Mi Band Master, can also influence. Even if you perform all these actions, then MIUI does not guarantee work without breaks, since they have problems with Bluetooth in the system.

2. Why can not I find my bracelet in the list of devices for binding?
- On some systems (again, this is mainly MIUI), a standard search cannot always find a bracelet, so it helps to launch a search in the BLE Scanner program, if after the search the bracelet is still not visible, then try connecting to the bracelet in BLE Scanner. Try to enable / disable the Settings option ->Connection ->"Run a search before connecting (may improve or worsen the connection)".

3. Why does the alarm / interval pulse measurement not work?
- Here is similar to paragraph 1.
The only type of alarm clock that works without communication with the phone is “Alarm clock in a bracelet”; you do not need to perform all these manipulations from 1 point to operate it. On Android 6.0+, the program cannot wake up the phone more than once every 9 minutes, because of which interval heart rate measurement does not work with an interval of less than 9 minutes when the phone screen is off for a long time. If the phone is charging, then this restriction is removed and everything will work as intended. Turn off the Do Not Disturb mode, since all types of alarms do not work with it, except for “Alarm in Bracelet”.

4. Why is there no data from Mi Fit in Mi Band Master?
- At the first synchronization with Mi Band, all data that is in the bracelet is downloaded (no more than 40 days), no data is taken from Mi Fit (including settings, so settings must be set in Mi Band manually). Mi Band 1 does not know how to repeat synchronization data, which is why the data only gets into the application in which synchronization occurred earlier. On Mi Band 2 and Amazfit this is not, you can duplicate data in both applications. Soon there will be synchronization with Google Fit, then it will turn out to get all the data from Mi Fit.

5. Why do not notifications from applications work?
- Check if Mi Band Master has access to notifications. On some firmware, you need to turn it on manually with every reboot. If there is access, and notifications still do not come, then try to restart the phone and reinstall the program. For unknown reasons, on some systems, the notification service sometimes crashes and only the reinstallation of the program helps.

6. Why is the SMS / call notification not working?
- Check if there is permission to contacts with Mi Band Master. If at the first start you did not give permission to access contacts, then notifications will not work.

7. Why is the text not displayed on the bracelet screen?
- It is necessary to upload fonts to the bracelet (Settings>Bracelet ->Firmware ->Download fonts). If you have already requested the fonts and the text worked, but then disappeared, then most likely you are using MBM along with Mi Fit, Mi Fit overwritten the settings, which is why the text display function in the bracelet turned off. Together with Mi Fit, this function is problematic to use, since there is a program conflict. A temporary solution is to re-tie the bracelet in MBM every time Mi Fit disables text, the permanent solution is to use without Mi Fit.

8. Why doesn’t a call reset / acceptance work when a button is pressed?
- Check if you have tracking of button presses on the bracelet. Not all versions of Android allow third-party programs for security purposes, so if they do not work, then the only solution is to change the firmware of the phone.

9. Is it possible to update the firmware of the bracelet through the Mi Band?
- Yes, Settings ->Bracelet ->Firmware

10. Why do sleep data differ in Mi Fit and Mi Band?
- We use our own sleep analysis algorithm, since the Mi Fit code is closed and there is no possibility to take this algorithm from them so that everything matches. In addition, Mi Fit does not know how to display more than one dream per day, unlike the Mi Band.

11. Why do the pulse zones have the wrong ranges to which I am used?
- We took the formula for calculating heart rate zones from the adidas website and we believe that it correctly shows the heart rate zones. Due to the fact that the Mi Band distorts data quite a lot during movements, it seems that it is impossible to reach some heart rate zones. In fact, if you do not move, then the bracelet will show the correct pulse and all zones are perfectly achieved with physical activity. Zones are regulated by 2 parameters: the heart rate in a calm state and the maximum heart rate, both of these parameters can be set in the heart page settings.

12. Is it possible to use once purchased PRO status on several devices at once?
- Yes, if these devices use one Google account.

13. When using the Mi Band, my phone and bracelet became faster to discharge, what should I do?
- List of functions that accelerate battery drain:
1) Interval pulse measurement (enabled by default, 5 minutes interval)
2) Continuous pulse measurement (measuring the pulse approximately once a second, the bracelet sits very tightly and prevents the phone from falling asleep during the measurements)
3) tracking clicks (sets the minimum connection delay with the phone, because of which the battery of the phone and bracelet quickly sits down)
4) The Settings - Pulse option is enabled - "Measure heart rate automatically without phone"
5) The option Settings - Bracelet - "Bracelet is visible to other devices"
6) The Settings - Steps option is enabled - "Get the number of steps for the current day in real time"
7) The Settings - Bracelet option - "Automatic data synchronization interval" is enabled
Another possible reason: you just installed the program, often go to the page of steps, sleep and the main page, because of which data synchronization starts every time, which puts the battery. Frequent checks of notifications also noticeably lower the battery.

14. My pulse is measured every 2 minutes, but I didn’t include interval pulse measurement, what should I do?
- You have a sleep helper turned on, which automatically measures the pulse every 2 minutes during sleep (or when there is little movement and the bracelet thinks you are sleeping), and you do not need to communicate with the phone, unlike interval and continuous pulse measurements. This sleep assistant is disabled in the Pulse settings page.

15. Why does the program need access to SMS, Contacts, Memory, Phone and Location?
- Contacts - to display the name of the contact, as well as to create notifications to certain contacts
Location - to search for a bracelet on Android 6.0+
Memory (Required) - to store activity data and settings
Phone - to reset and answer a call using the bracelet button
SMS - for SMS notifications, as well as displaying their contents on the bracelet screen

16. Can I fool Google Play and developers with the help of hacking software (Lucky Patcher, Freedom and others)?
- No, any hacking attempts will lead to blocking, which you will not be able to remove yourself.

17. Do you plan to reduce or increase the value of PRO status?
- No, in the near future the price will remain the same (149 rubles).

18. What is the difference between PRO and FREE version?
FunktsiyaFREEPROReklamaEstNetSvetlaya temaNetEstKolichestvo notifications prilozheniya2BeskonechnoKolichestvo notifications sms2BeskonechnoKolichestvo notifications zvonki2BeskonechnoKolichestvo notifications sobytiya1BeskonechnoKolichestvo alarms / reminders / taymerov3BeskonechnoMinimalny measurement interval pulse in interval rezhime5 minut15 sekundMaksimalnoe time pulse measurements in continuous rezhime5 minutBeskonechnoPodrobnaya information about sleep / steps / clicks pulse7 dneyLyuboy denOtslezhivanie knopki20 nazhatiyBeskonechnoVyvod the name of the song on the bracelet’s screen No YES Sound of the heartbeat voice None Y N The firmware of the wristband from your file None Y N The automatic synchronization of the bracelet font from your file N Y N Automatically synchronize the data with the specified interval N Y N End the call with a long press N Y N

19. Can I add my own icons to the bracelet or display the day of the week in Russian?
- No, this is embedded in the firmware, and only the manufacturer can edit it.
UPD: Already we can:Xiaomi Mi Band 2 - Discussion
Xiaomi Mi Band 2 - Discussion

20. After working with MBM I can not tie a bracelet back to Mi Fit, what should I do?
- Perform the following steps:
1) Untie the bracelet in MBM or remove the MBM.
2) Run Mi Fit.
3) Untie the bracelet there, if it is now attached.
4) Tie a bracelet in Mi Fit again. Some have a problem with this item, Mi Fit cannot find a bracelet. Try to restart bluetooth, place the bracelet as close as possible to the phone and start the search again. If the bracelet is not located for a long time, then try to erase the Mi Fit data and log in to your account again, and then try the binding again. It also helps launch the scan in the program BLE Scanner.
!!! Each item is important, you can not skip any of them to solve the problem.

There are two reasons for this problem:
1) You incorrectly linked the bracelet in MBM. If you want to use both MBM and Mi Fit at the same time, then DO NOT need to choose the authorization method "Own authorization", you need to choose "Authorization through Mi Fit"
2) You deleted Mi Fit, but did not untie the bracelet there, after which the MBM selected the authorization method “Own authorization”, and then you installed Mi Fit again, which left the old binding, which is no longer valid, as the authorization key has changed, but After all, Mi Fit does not know that the bracelet was tied to a third-party program.

21. Why when calling / sms only the contact number is displayed, not the name?
- The numbers in the address book must be entered via the country code (for example, +79996661115). If the number is recorded after 8, the program will not be able to find the name by number.

22. Why after the alarm goes off at the set time after 10 minutes does it work again?
- The built-in alarm clock in the bracelet (Alarm type in the bracelet alarm clock) is automatically activated again after 10 minutes if you have not made enough movements so that the bracelet will realize that you are awake. This is not regulated by the program and does not turn off.

23. What should I do if, after purchasing PRO status, I’m still writing FREE status?
- Disable Google Play emulators such as Lucky Patcher and Freedom, if they exist. Reboot your phone. Sometimes the purchase does not immediately appear on the server, so you need to restart the phone after a while.

24. How to flash custom fonts? (Mi Band 2)
- Click Settings ->Bracelet ->Firmware ->Download the firmware from the file ..., then select the font file with the .ft extension. Only for PRO users.

25. What events (intent) can I catch in Tasker?
1) mb2_tapN - When you click on the button of the bracelet. Instead of N, the number of clicks.
2) mb2_mute_call - When you mute a call from a bracelet button.
3) mb2_end_call - At the end of a call from the bracelet button.
4) mb2_answer_call - When answering a call from a bracelet button.
5) mb_start_charging - At the start of charging the bracelet.
6) mb_stop_charging - When removed from charging the bracelet.

26. How to change the delay between parts of the text on custom firmware?
- Some custom firmware have a modified time display text on the screen of the bracelet (the default is 4 seconds). Due to the fact that MBM sends parts with a delay of 7 seconds, there will be loss of parts on firmware with a delay of more than 7 seconds, so you need to set your own. If your custom firmware has a display time of 8 seconds, then create the file mibandmaster / custom_text_delay.txt and write 8000 there. The time is specified in milliseconds. There should be nothing in the file except a number.

27. Binding bracelet flies after reboot
- Try turning on / off the Settings option ->Connection ->"Run a search before connecting (may improve or worsen the connection)".