Sony FDR-X3000 / HDR-AS300 - Accessories | [Action] [Camera] [Accessories]



Rep: (117)
Accessories forSony FDR-X3000 / HDR-AS300
Sony FDR-X3000
Discussion пїЅ | Accessories пїЅ

Fasteners, belts, stops, camera protection, etc.

Original accessories from Sony: ( Online )

For filming:
Finger Guard AKA-FGP1(One-handed operation
Shoot great videos with a comfortable and ergonomic grip with a trigger. The fastening of the Live-view2 control panel makes it easy to frame and capture images with one hand.)

Mounts:
Rubber supercribor VCT-SCM1(Reliable mounting on the suction cup allows mounting the camera on flat horizontal and vertical surfaces. The mounting consists of three hinge assemblies that allow fixing the camera literally at any angle.)
Clip on the cap AKA-CAP1
Pipe / frame mounting VCT-HM2

Camera protection:
Safety glass on the lens MC AKA-MCP1 (on ali)
(Protect your Action Cam from dirt, dust, and scratches without an aquabox. The AR anti-reflective coating reduces glare and ghosting for enhanced clarity even in bright conditions. Water-repellent and oleophobic coating.)
Rigid protective cap for AKA-HLP1 camera lens(There are comments that this cover is not compatible with our device)
Anti-fog film AKA-AF1(Reusable anti-fog inserts absorb condensate in the aquabox2 when used in water or on snow. Each insert ensures lens cleanliness and ensures clear image.)
Semi Hard Case LCM-AKA1

Non-original protection:
Protective cover for Sony AS300R X3000R HDR-AS300R FDR-X3000

Homemade protection
Do-it-yourself lens protection
Uante case (video)(link to purchase is in the comments)


Non-original accessories:

Other useful non-original for Sony Action Cam
Fastening On a hand -ali link
Glass protection -ali link
Additional transition with GoPro -ali link
Clothespin on a backpack -ali link
The holder for fingers -ali link
Handle the camera - [url = "https: //ru.aliexpress....ction/32797412873.html"] Link on the weapon mount -ali link
Monopod + Smartphone -ali link
Camera Insurance -ali link
Mirror Mount -ali link
Float -ali link
Platform for Sony -ali link
Water insurance -ali link

Microphones
Microphone FM-15 FlexiMis for Dji Osmo -ali link
Lapel microphone Aputure A.Lav lavalier:ali link
Microphone Rode VideoMicro -ali link
Lapel Stereo Microphoneali link

Homemade mounts:
Mount console x3000 on monopod from Alengos
Small hand made for fans of road bikes from DUEJIiST

Tripods:
Tripod stand (Sony FDR-X3000 / HDR-AS300 - Accessories (MacVit Post # 74624374)

Accessories for diving:
Scope (for diving):
http://danydanfree.free.fr/boutique-accessoires-sony-x3000-as300-as50-sony-x3000-plongee-red-sniper.html
Red lens (for diving):
https://aliexpress.com/item/-/32888527071.html
Different lenses:https://aliexpress.com/item/-/32885009648.html
Case (camera with aquabox breaks in): I also bought a case, I won’t advertise it, but I’ll leave the link for general development. The camera will get into the aquabox but with difficulty, and putting something else there is very problematic.
https://aliexpress.com/item/-/32836906122.html

Batteries and memory

Battery for Sony -NP-BX1

Original:
Battery NP-BX1 Series X -sony.ru

Unoriginal:
Charging + 2 batteries -ali link
Charging + 3 batteries -ali link
Charging + 4 batteries -ali link
Battery 2 pcs -ali link
Auto charge + 2 batteriesali link
Sony FDR-X3000 / HDR-AS300 - Accessories (Post Xeok # 58439890)
Charger for sony Camera BC-TRX BCTRX NP-BX1 BK1 BD1 FD1 FG1 BG1 FT1 FR1

Manual stabilizers
Our camera has a very high-quality image stabilizer, however, if you want a really smooth picture taken on the go, you need to take care of acquiring an external stabilizer.

Here are the options that are suitable for our camera:
PILOTFLY ACTION-1 3AXIS STABILIZER(fully fit for x3000) Byreferencebelow there are a lot of videos with demonstration of the stabilizer. Also on youtubeis fullvideos with examples.
Feiyu Tech FY-G4 GS Ultra Gimbal 3-Axis for Sony(suitable for AS200, X1000v, however for mounting x3000 you may need a small counterweight (video)) Example Example Example Overview Overview Review from olegf2
Zhiyun Crane-M(can also be used for mirrorless weighing up to 650 grams) Example of workhere comparison with or without comparison with or without
Sony AS-300 on Zhiyun Smooth Q
Fantaseal stabilizer -https://aliexpress.com/item/-/32800283289.html
3 DJI Osmo mobile (with adapterSony FDR-X3000 / HDR-AS300 - Accessories (Post BazonTSK # 89357647)and is such a modificationSony FDR-X3000 / HDR-AS300 - Accessories (Post BazonTSK # 96965263))

Feiyu Tech G6 Plus- without alterations, you can also use for other chambers up to 800 grams
https://www.youtube.com/watch?v=XDPrd3Suvy

Feiyutech FY-G5GS- might require modification
https://www.youtube.com/watch?v=Eineuhzw508.
http://www.youtube.com/watch?v=mqatkl3zfts.
https://www.youtube.com/watch?v=uwoyspfgpom

Feiyu FY-G6- might require modification


Memory cards
homemade:
Miscellanea:


On filling caps please contact the moderators section, sending the "Complaint" on messages, links to which you want to add.

Post has been editedOleg Vereshchagin - 26.12.20, 15:40
Reason for editing: Description



Rep: (2086)
* remorse72, Samsung standards, but not with Ali



Rep: (0)
* remorse72,
it is better to buy in yourself, the difference is minimal

Post has been editedLipesin - 24.01.18, 18:38



Rep: (0)
And also tell me, the RM-LVR3 console is very different from the old console? Is it sense to overpay for it?



Rep: (16)
* zabelin13,
* Alengos,
* ant0n88,
Guys, and what the usual G5 does not suit you?



Rep: (5)
Iamevil @ 01/25/18, 15:59*
Guys, and what the usual G5 does not suit you?

Yes nothing secret, just it is designed specifically under this model)
By the way, I came the unit ... But with a marriage, not a worker ... I try to bone, unpacking did not take off .... pipette))



Rep: (0)
People, tell me who is what uses instead of the original lid for mad money? ) How to protect the lens?
Even on Ali, something did not find any cheap options for banal protection. It was for 1000r - and that is no longer.



Rep: (125)
AMDXP @ 27.01.18, 13:23*
who uses instead of the original cover

Corks from anything (drinks, medicines, etc.)



Rep: (3)
Print to the 3D printer nozzle for windscreens. The one that is put with the original protective breakdown. In general, the bottom is fed. It would be to expand by 1.5 mm. And lengthen, i.e. By 1.5-2 mm in height increase (also at the bottom). The top is normal - lasted, but the bottom is narrow. In the photo it can be seen how the cracks went and broke out this nozzle when it stretched.

Attached images
Attached Image
Attached Image
Attached Image


Post has been editedbarkas333 - 27.01.18, 20:17



Rep: (8)
Barkas333 @ 01/27/18, 20:16*
Print to the 3D printer nozzle for windscreens. The one that is put with the original protective breakdown. In general, the bottom is fed. It would be to expand by 1.5 mm. And lengthen, i.e. By 1.5-2 mm in height increase (also at the bottom). The top is normal - lasted, but the bottom is narrow. In the photo it can be seen how the cracks went and broke out this nozzle when it stretched.

And the link to the file that you print can give?

Post has been editedmax_pavlov - 27.01.18, 20:32



Rep: (3)
Here in thisPostBrew a link



Rep: (10)
Good day. I purchased a new FEIYUTECH G5 GS model, which is specifically for Sony cameras. Without a cover, it works badly (in extreme positions begins to twitch), but if you hang a loader on the camera, then everything starts working fine. This is preliminary tests. I will deal next.



Rep: (3)
Finally, I put the Sony AS-300 on Zhiyun Smooth Q. To do this, the adapter printed on a 3D printer. For a counterweight used 5 nuts M10. Total weight (camera + part + nuts) 216 gr. In principle, at the limit of the possibilities of the stabilizer (its working weight up to 220-230 gr.), But if all this is a deceit, it works easier for him. Only in the most inclined positions are heard the buzz of motors, which at the limit work.
Photo in the appendix.
And here is the video

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedbarkas333 - 28.01.18, 18:17



Rep: (0)
Koshachi @ 01/28/18, 14:33*
Good day. I purchased a new FEIYUTECH G5 GS model, which is specifically for Sony cameras. Without a cover, it works badly (in extreme positions begins to twitch), but if you hang a loader on the camera, then everything starts working fine. This is preliminary tests. I will deal next.



It is very sad to hear, I hope they correct it. I do not want to bother with cargo when you buy Stabs specifically for this camera. I hope they will update in the near future. Write no sound, I'm not interested in video.



Rep: (10)
To correct in them will not be anything. The fact is that this model is designed precisely under Aquabox. It's just that the camera can be installed there, but lacks the length of the groove to shift it back to calibrate (so that the camera stood horizontally in the off state.)
I have already come up with a solution. I will do how I will do if I start posting this solution to the problem.
To be honest, I do not understand the logic of the developers of this stabilizer. For what it was necessary to stuff the camera into the case. And how to write sound? A very strange decision. The only thing that comes to mind is that they position this stabilizer as a waterproof, and the camera without a cover is afraid of water, so they decided to shove into the case of the camera, so that you can immerse the water together with the stabilizer. Strange solution. Based on this, it turns out a very narrow use of this stabilizer.



Rep: (0)
Koshachi @ 01.29.18, 02:29*
To correct in them will not be anything. The fact is that this model is designed precisely under Aquabox. It's just that the camera can be installed there, but lacks the length of the groove to shift it back to calibrate (so that the camera stood horizontally in the off state.)
I have already come up with a solution. I will do how I will do if I start posting this solution to the problem.
To be honest, I do not understand the logic of the developers of this stabilizer. For what it was necessary to stuff the camera into the case. And how to write sound? A very strange decision. The only thing that comes to mind is that they position this stabilizer as a waterproof, and the camera without a cover is afraid of water, so they decided to shove into the case of the camera, so that you can immerse the water together with the stabilizer. Strange solution. Based on this, it turns out a very narrow use of this stabilizer.


I wrote to the support service, I was answered that they plan to update the software to work without boxing, but when it would be exactly not said. I will wait for me with boxing this device is not interesting. I am also important sound.

It seems to me that the more appeals will be to them, the faster they think, change the

Post has been editedzabelin13 - 29.01.18, 01:16



Rep: (10)
We are waiting for the video review on YouTube on this stub.



Rep: (16)
Barkas333 @ 01/28/18, 00:16*
Print to the 3D printer nozzle for windscreens. The one that is put with the original protective breakdown. In general, the bottom is fed.

Same problem. I tried to modify the napfil, it did not work. Too much need to be used.



Rep: (10)
Iamevil @ 01/29/18, 14:39*
Barkas333 @ 01/28/18, 00:16
Print to the 3D printer nozzle for windscreens. The one that is put with the original protective breakdown. In general, the bottom is fed.

Same problem. I tried to modify the napfil, it did not work. Too much need to be used.

Tomorrow I will correct and lay out the normal version.



Rep: (16)
* koshachi maybe it will be a useful photo.

Attached Image


Complete roundings, the camera rests on them.

Post has been editediamevil - 29.01.18, 17:36



Rep: (3)
Who thinks about buying a stabilizer. HereAn example of my videoWith the stab of Zhiyun Smooth Q for 130 USD. The quality is quite worthy for this money. I think it makes no sense to take more expensive Feiyutech.

Post has been editedbarkas333 - 29.01.18, 20:38


Full version    

Help     rules

Now: 13.01.21, 09:46