Homtom HT37 - Firmware



Rep: (55)
HOMTOM HT37 - Firmware
PictureHOMTOM HT37
Description | Discussion | Firmware

Important information!
Do not charge someone else's charges, it is possible the death of both usb and the phone itself!

Official firmware
Unofficial firmware
Instructions
TWRP and Ruth
Useful

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 30.09.19, 23:36
Reason for editing: Maud curtain as HT16



Rep: (4192)
TWRP 3.1.0forHOMTOM HT37 : Attached filerecovery.img(11.08 MB)

Recovery is built on the basis of the Android 6.0 kernel firmware version HOMTOM-P516-HT37-Android_6.0-V01-20170510_20170509-2127 / 2017 05 月 09 日 星期二 21:27:25 CST
GettingROOT
To get ROOT install this patch from TWRP:Attached fileSuperSU_PRO_v2.79SR4_Patched.zip(5.1 MB)


Attached files

Attached fileMT6580_Android_scatter.zip(1.09 KB)


Post has been editedAlexanderL - 10.06.17, 21:47
Reason for editing: In the header



Rep: (70)
Instructions for installing firmware via TWRP

1. Go to the recovery (Reboot->Recovery mode or enable the On button + Volume up)
2. Go to the menu Cleaning->Selective cleaning note
items
Davlik / ART Cache
System
Cache
Data
Device memory

If you go from the drain to the custom
Click Format Data

3. Go to the Setup menu->Select the firmware_file.zip (from the memory card).
4. Wait for the installation, reboot into the system.

Installing patches, gaps: do not clean anything beforehand, immediately select the installation file, wait for the installation, clear Davlik / ART Cache

Post has been editedgrafom - 25.07.17, 11:04
Reason for editing: In the header



Rep: (70)
Stock firmwarefor TWRP

Not rutovana.
Cleaned up:
system \ app
AdupsFota
AdupsFotaReboot
DocumentsToGo
Email
Exchange2
Gmail2
Maps
MiKeyboard
YouTube

system \ priv-app
GO_Keyboard
GoogleFeedback
GooglePartnerSetup
LauncherL1 (replaced by ZenLauncher)
Velvet

Installation via TVRP with wipes, because the virus could create folders / files in which malicious code remained. Thus, I don’t know how to clean viruses from an already infected system, because I didn’t see viruses at first. (BUT, I repeat, it’s not a fact that we managed to get rid of the Triad, because there is a possibility that the system apk files are also infected)
DownloadGoogleDisk

Post has been editedshushckowa.larisa - 03.08.17, 07:34
Reason for editing: In the header



Rep: (70)
* AlexKAN72,
Firmware V01-20170510

Post has been editedAlexanderL - 14.08.17, 09:48
Reason for editing: In the header



Rep: (1012)
Attached Image

Descriptions
The most sensational and most anticipated new in 2016.
I present to your attentionMIUI 8

Android 6.0.1
Ruta no, no gaps


Screenshots
Attached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached Image

Bugs
Found?

Download

Thanks


Post has been editedmax127328 - 17.02.18, 12:53
Reason for editing: Fix



Rep: (1012)
AICP 11

Description
Android version - 6.0.1
Kernel version - 3.10.18


Bugs
Found?

Screenshots
Attached ImageAttached ImageAttached Image

Download

Thanks
rock1234Build firmware


Post has been editedMgalex - 02.09.17, 14:38
Reason for editing: In the header



Rep: (1012)
On the test MokeeOs
Download



Rep: (7)
HOMTOM-P516-HT37-Android_6.0-V01-20170707
Here are the Chinese gave

Post has been editedgrafom - 20.10.17, 19:23
Reason for editing: In the header



Rep: (15)
For those who flew IMEI after flashing.
1) View and write down two IMEI codes (It is under the battery)
2) Your device should be Root
3) Download the Chamelephon software and give Ruth access.
4) Keep your IMEI code
5) TURN OFF !!! and then take out the battery for 10 seconds.
6) Turn on the phone
7) Cheers

Post has been editedMgalex - 21.10.17, 15:27
Reason for editing: In the header



Rep: (31)
TWRP backup of the second official firmware:
https://yadi.sk/d/dAPBPL913NyEiE
I rolled out the one that for FlashTools - with the help of TWRP. Zabekapil, restored, IMEI does not fly, everything is fine.
I was in a hurry, I cannot stay without a connection, so out of habit I quickly installed several programs from apk, and only then I remembered to make backup, and it seems the folder with apk-files also got into the archive ... there and the doctor web with the key as a bonus)) )
If someone needs to install, or rather, to restore from TWRP, it is suitable.
Wipes are required.

Shl. All experiments are at your own risk.
Installed from apk-files:
LenovoLauncher_v7.2.20.150528
com.whatsapp.apk
ES + File + Explorer.ver.4.1.6.9.2.build.607.apk
FBReader + 2.8.5.apk
Flyme_Music_5.4.51.apk
MX + Player + Pro + 1.9.3.apk
Total + Commander-2.81b8-Mod.apk
Viber_v7.8.0.0.apk
VLC-Android 2.1.13-ARMv7.apk
WhatsApp_2.17.351_x86.apk
Yandex_Navigator_v1.79.apk
Zedge-5.9b5-AdFree.apk
Just + radio + online + 5.2.apk
Sberbank.ver.7.8.3.build.2017090800.apk
Yandex + Browser ++ 17.7.0.1178.apk
Yandex.Disk_3.19.apk
Yandex.Mail ++ 3.19.apk


Post has been editedMgalex - 22.10.17, 21:39
Reason for editing: In the header



Rep: (70)
Firmware HOMTOM-P516-HT37-Android_6.0-V01-20170807 for TWRP
Download fromGoogledisk

Post has been editedAlexanderL - 23.10.17, 11:17
Reason for editing: In the header



Rep: (1012)
Attached Image

DESCRIPTION
DIRTY UNICORNS 10.6 (AOSP 6.0.1)

Unique in its kind AOSP firmware with the engine of themes from LineageOS and a bunch of settings.
Scanner and sound work

Installation via TWRP (wipe of the first four sections is required).
(After the first launch, it is recommended to restart the device, otherwise there may be errors in the applications)
Inaccuracies
  • FM Radio does not work

SCREENSHOTS
Attached ImageAttached ImageAttached ImageAttached ImageAttached Image
ACKNOWLEDGMENTS
Pedro pereira
(author of the original firmware)

aleha.druga
(5020 vendor blobs)

Abidur rahman
(gh6 / gh6 + vendor blobs)
ADDITIONALLY
SuperSU (always new version)
Google apps (ARM »6.0)

Download: GoogleDrive

Post has been editedMgalex - 02.11.17, 18:56
Reason for editing: In the header



Rep: (125)
**************************************************
* This is a firmware installation manual for NEW (HT37),
* so that newcomers can simply navigate in the new business, see the whole picture
* and if possible, give all the necessary information in one place, dispel doubts and warn about the "pitfalls" associated with the firmware.
**************************************************

* The instructions were written in collaboration with the forum member.SOSA1
* Suggestions for improvement instructions are welcome. Send your feedback to the PM or you can click the "good" or "bad" button at the bottom of this post.
**************************************************
Introduction: This manual contains information from various sources and is based on the experience of several participants in this forum.
We can not provide all the options for which something can go wrong and cause damage to your device, so you should clearly understand
that all actions that you perform in the course of carrying out the points of this instruction, you do at your own peril and risk,
and we do not assume any responsibility for the result of your actions and do not give any guarantees.
You should also understand that when you started making changes in the system of your device, you lose the warranty of the manufacturer and / or seller if there is one.
*************************************************
Basic concepts with which it is necessary to become familiar before proceeding to action.
  • The first and main rule: measure seven times, cut once
  • The names of the directories and the entire path to them in which you unpack the files associated with the firmware and the USB flash drive itself should not contain Cyrillic characters, should not be too long.
  • In the continuation of the previous item, it is better not to create folders on the desktop, but to create a folder in the root directory of one of the disks on the computer.
  • Save everything you can with the help of programs, or with the tools of the android itself, such as synchronization with Google, or simply by copying everything that is possible onto an external memory card,
    since during the firmware all data will be lost (even if you plan to use TWRP backup functions). Export your contacts to an external memory card.
  • Several errors that can deliver fleshtul will be due to the fact that communication with sewn device is bad, so do not use long USB cables, USB ports are on the motherboard (on the front of the PC, hubs, extension cords) and better use of more recent cables, which are likely to provide a more reliable contact. If after the change of cables and USB ports will still appear a mistake, it is possible to reduce the speed of USB connection with "High speed (480 Mbit / s)" to "Full speed (12 Mbit / s)" (thanks for the ideaJLuBeHb)
    List of errors that can be caused by a bad connection + USB Speed ​​Screenshot
    • (1003) S_COM_PORT_OPEN_FAIL
    • (1013) S_COM_PORT_OPEN_FAIL
    • (3001) S_DA_EXT_RAM_ERROR
    • (4008) S_FT_DOWNLOAD_FAIL
      Attached Image

  • Installing the driver and running the programs should be done with administrator rights, if you log in as a simple user, then right-click and select "Run as Administrator".
    Screenshot
    Attached Image

Basic terms:
  • stock (stock) - factory, all that is done by the manufacturer of a specific phone at the factory and specifically for a particular model
  • custom (custom) - alternative or modified - various adaptations / compilations by the hands of folk craftsmen
  • recovery - a system partition that contains tools for flashing, creating backups, restoring from backups, etc.
  • flashlight (sp flash tool) - a program that allows you to flash (write) system partitions into the phone: the system itself, the recovery (factory or custom), as well as fix hard failures / system breakdowns
  • wipe - cleaning partitions of the operating system
  • scatter (scatter) - this is a file in which in the text form contains the markup sections of the operating system.
  • A preloader is a preloader, a section of the system that allows a computer to connect a device and work with it in a low-level mode, in the context of this instruction, allows you to make firmware.
  • Nvram (nvram) is a very important section of the operating system in which the settings of your device are stored, such as: communication parameters, IMEI, MAC address, calibration of the touch.
    It is easier to save once than to restore for a long time. Donor NVRAM (with the exact same phone model) is better not to use, only when there is no other way out.
*********************************************
Procedure and is there a choice? The choice is, but small:
  • if you have almost never used the phone and you have nothing to save / lose, then you can flash the system image with the USB flash drive (system.img)
  • more common case when you already used the phone and want to minimize the risks associated with the firmware procedure - in this case, you must first flash custom recovery (TWRP) and in the future you can do almost everything that the flashlight does and even more, only without using a computer and wires.

TWRP Recovery:
    Much more powerful tool, compared with factory recovery (on our factory apparatus it is practically useless),
    having a graphical interface and controlled from the phone screen using the touch panel (in a simple way, with a finger)
    TWRP is a whole set of tools, I would recommend to treat it as a toolbox in your home or a first aid kit - it’s better to have it and you don’t need it than not to have it at hand when the need arises.
    TWRP is installed in a special system section of the internal memory of the phone, in place of factory recovery.
    The main items of the main menu of the program:
    • Installation - installation of factory / custom firmware, updates, additions, fixes (in particular, root andCorrection dialer / dialer)
    • Cleaning - clearing various system sections, Factory Reset - resetting to factory settings
    • Backup - creating a backup copy of the installed firmware in full or in separate sections (system, settings, data)
    • Restore - restore the firmware from a backup copy of the whole or individual sections
    • Optional - Connect to computer via USB, in removable storage mode

    As you can see the meaning / purpose of the points is clear from the names themselves.
    TWRP interface
    Attached Image
    Attached Image
    Attached Image
    Attached Image

************************************************
Preparation of images and file scatter:
  • Download TWRP Imagerecovery.img(11.08 MB) and a scatter to itAttached fileMT6580_Android_scatter.zip(1.09 KB)
    Put it in a separate folder, for example C: \ twrp, unpack MT6580_Android_scatter.txt. Thanks to the forum member* jemmini
  • Download the archive with the stock firmware, there are various images in the archive, but you only need system.img, unpack system.img and write it to the microSD card in the root directory.
    At the moment, the latest stock firmware, without viruses,HOMTOM-P516-HT37-Android_6.0-V01-20170707.rar(781 MB) is recommended almost unanimously for installation on this device by experienced forum participants.
    Thanks to the firmware for the forum member* bessarab85
    MD5 Checksum
    Checksum for the file HOMTOM-P516-HT37-Android_6.0-V01-20170807.rar 3dbec58b183fe4358e79bc0a1df57108
    for those who want to make sure that no one has modified the archive. If the archive has been downloaded with an error, it will not open, the archiver will give an error by itself and you should download the file again.

*************************************************
Main branch onsavagemessiahzine.com- SP Flash Tool
1. Installing the driver on the computer so that the computer can see the phone (Run as Administrator !!!).
  • Download MTK driver package tosavagemessiahzine.com(with auto-install driver via bat file)MTK_drivers.rar(821,41 КБ) or go to the forum threadsavagemessiahzine.comSP Flash Tool. Unpack to a directory, for example "C: \ spft \ drv".
    Find in folders the one that matches the architecture of your computer and the version of the operating system. Manually install the driver you need, if you do not know how to do this, try the auto-installer in the next section.
  • Or download the package containing the VCOM / PRELOADER driver in the exe-auto-installer onsavagemessiahzine.comDriver_Auto_Installer_EXE_v5.1632.00.zip(9.3 MB). Run DriverInstall.exe and follow the installer’s instructions.
    The whole truth about the driver
    In fact, no special driver is not. Use the built-in Windows standard and universal usbser.sys driver for communication PC with a variety of devices through a virtual serial port. To work with MTK devices need only INF files so that the most appropriate installation package will be one in which there are only INF files (text of the configuration), and there are no files SYS (binary part of the driver). If there is a problem with signature verification or want a more detailed explanation, it can be read on a branch fleshtulaVery detailed and clear about the driver

  • Make sure that the driver is installed and the phone is correctly detected when connecting:
    • open the device manager.
    • Connect the phone without a battery, usb cable to the computer.
    • approximately every 5 seconds a new section "Ports (COM & LPT)" will appear and disappear and there will be a new device in it
      with the name "Preloader USB VCOM Port" / "MediaTek PreLoader USB VCOM" or a similar name, as long as the name contains the word VCOM.
      The fact that the preloader "blinks" every 5 seconds is normal, it should be so, and this is not a problem of the computer connecting to the device.
      At that moment when the flashlight establishes communication with the preloader in the phone, the preloader switches to the firmware mode and there will be no more blinks.
      Screenshot Device Manager
      Attached Image

2. Installing TWRP Recovery using the SP Flash Tool.
  • You can download the latest version of the USB flash drive onsavagemessiahzine.comSP_Flash_Tool_exe_Windows_v5.1804.00.000.zip(52MB) or go to the forum threadsavagemessiahzine.comSP Flash Tool. Unpack to a directory, for example "C: \ spft"
  • Start from the folder flash_tool.exe (Run as Administrator !!!), go to the Options- menu>Download, tick USB Checksum and Storage Checksum, if you do not check this check, the device may be corrupted.
    Screenshot
    Attached Image

  • The presence of a battery or its absence in the phone during the firmware does not affect the process itself, nor its result, but the order of operations varies slightly.
    The flash unit itself determines if there is a battery or not, if you do not change "auto detect" in the Battery settings.
    Screenshot
    Attached Image

  • In the Scatter-loading File- line>choose choose the file MT6580_Android_scatter.txt that you have already prepared in the folder C: \ twrp.
    The program will fill in the plate and only the "recovery" section will be marked, if other sections are also marked, then all checkboxes except recovery should be removed.
    Screenshot
    Attached Image

  • In the drop-down list above the left corner of the partition table select Download Only
    (Other options are needed only when the device has already been scanned and / or damaged sections of the operating system and need radical measures to restore the system.
    Format All and Firmware Upgrade will format all partitions of the system and will lead to data loss in NVRAM)
  • Before pressing the Download button with a green arrow in the upper left part of the program, prepare the phone without a battery, usb cable in the computer, but not in the phone
    Press the Download button, nothing will happen, the flash unit will wait for the phone to connect.
  • We connect the usb cable to the phone, at this moment the computer will recognize the device and the SP Flash Tool will start the firmware itself.
    The process strip (or multi-colored process stripes) will run, wait for the firmware process to complete - the message Download OK with a daw in the green circle.
    Screenshot
    Attached Image

  • Disconnect the usb cable from the phone.

3. Installing stock firmware using TWRP Recovery
  • We insert the memory card on which the system.img is recorded in the root directory into the phone, insert the battery, replace the back cover.
  • Turn on the phone with the transfer to the recovery mode: on the phone off, hold down the volume up button, then hold down the power button and hold the power button until the HOMTOM logo appears, release the volume up button when TWRP Recovery appears
  • When you first start, TWRP will ask "Leave the system partition read only?".
    We make a svayp "Allow changes" in order that the system at the first start could not break / remove TWRP.
    After this change, do not update the firmware over the air (Wireless Update, OTA), if it suddenly appears from the manufacturer.
    Screenshot KEEP READ ONLY
    Attached Image
    .
  • In the main menu, go to the item "Backup-Backup / Backup", select the Micro SDCard drive. Mark the section NVRAM and NVDATA (in the screenshot NVDATA is not visible - scroll down). Make "Swipe to start."
    Now you will have a backup copy of NVRAM. Then, when you start using the phone, locate the TWRP folder on the memory card and package the NVRAM and NVDATA files into the archive, and copy the archive onto the hard disk of your computer or another hard disk.
    Screenshot Backup
    Attached Image
    Attached Image

  • In the main menu, go to the item "Cleaning / Wipe", click "Custom cleaning", mark everything except Micro SDCard. We do "Swipe for cleaning".
    Screenshot Wipe
    Attached Image
    Attached Image

  • In the main menu, go to the item "Install / Install", click "Install img".
    Install Screenshot
    Attached Image
    Attached Image

  • Find the system.img file on the memory card that you wrote there before and check the System Image section (the system.img-- correspondence is very important>SYSTEM). Make "Swipe for firmware."
    LONG, we are watching the process until the inscription in the log reads "IMAGE FIRMWARE IS COMPLETED". At the end of the process, click the "Restart to OS" button.
    Screenshot Install System
    Attached Image

  • Rebooting can be long (5-15 minutes), please be patient.
  • Set the correct date and time to avoid problems with security certificates and incorrect application operations, such as a dialer.


*************************************
* Flash system firmware, for those who do not want to install TWRP
* If you have already installed TWRP and have already flashed the system using TWRP, then you can not read this part of the instruction.
*********************************************

Flash system firmware, for those who do not want to install TWRP
  • Installing the driver on the computer so that the computer can see the phone (Run as Administrator !!!): see item number 1.
  • You can download the latest version of the USB flash drive onsavagemessiahzine.comSP_Flash_Tool_exe_Windows_v5.1804.00.000.zip(52MB) or go to the forum threadsavagemessiahzine.comSP Flash Tool. Unpack to a directory, for example "C: \ spft"
  • Start from the folder flash_tool.exe (Run as Administrator !!!), go to the Options- menu>Download, tick USB Checksum and Storage Checksum, if you do not check this check, the device may be corrupted.
    Screenshot
    Attached Image

  • Download an archive with stock firmware containing images (files with the img extension) and a scatter file, unpack the archive into a separate directory.
  • In the Scatter-loading File- line>choose choose the file MT6580_Android_scatter.txt that you prepared in the folder in the previous paragraph.
    At this point, the program will fill in the partition label in the main window and mark all the sections with checkmarks.
    Screenshot
    Attached Image

    It is necessary to remove all the checkboxes except the "system", this is the section where you can fill in the image for the system to be updated.
    Screenshot
    Attached Image

  • In the drop-down list above the left corner of the partition table select Download Only
    (Other options are needed only when the device has already been scanned and / or damaged sections of the operating system and need radical measures to restore the system.
    Format All and Firmware Upgrade will format all partitions of the system and will lead to data loss in NVRAM)
  • Before pressing the Download button with a green arrow in the upper left part of the program, prepare the phone without a battery, usb cable in the computer, but not in the phone
    Press the Download button, nothing will happen, the flash unit will wait for the phone to connect.
  • We connect the usb cable to the phone, at this moment the computer will recognize the device and the SP Flash Tool will start the firmware itself.
    The process strip (or multi-colored process stripes) will run, wait for the firmware process to complete - the message Download OK with a daw in the green circle.
    Screenshot
    Attached Image

  • Disconnect the usb cable from the phone, insert the battery, return the back cover - you can turn on the phone
  • When the system boots, go to the settings: Settings-->Backup & Reset, do a factory data reset. This action will clear the data section (data) and cache (cache). If this is not done, for example, the browser will for some time swear on certificates.
  • Set the correct date and time to avoid problems with security certificates and incorrect application operations, such as a dialer.
  • Most likely, the stock recovery will no longer be called, so you will ever have to flash either the stock recovery or TWRP, of your choice, the firmware method is the same, you only need to upload the recovery image (recovery.img)


Post has been editedkuzja25 - 18.08.18, 14:13



Rep: (31)
The following information is rarely needed, but just in case I cite as a possible solution:

If it appears, then the device disappears in the file manager:
a) Enter the device manager, remove all USB firewood in general, if they were unsuccessfully installed;
b) Next, put only the desired VCOM, which one is written in the instructions for the firmware (its EXACT name, there are no consoles such as Android or instead of MTK - MediaTech and so on). Here you put it again;
c) Then this driver zapilivaet Wirth. device that is visible. You delete it, Windows asks, they say, remove the driver from the database, say no;
d) Voila, everything is ok. You need to continue to open SPTool, work with this and the driver will automatically slip when you insert the cord into the phone.



Rep: (31)
Dear friends!

The time has come, and I post the result: the manual and files for installing the "second" official (virus-free) firmware on the Homtom HT37 phone.
This is firmware HOMTOM-P516-HT37-Android_6.0-V01-20170807, received from the Chinese by our friendbessarab85 , for which it is possible to push him a plus in the reputation.
The idea of ​​this work belongs tokuzja25 , for which he - thanks, and of course - plus in reputation.

  • Warning: I cannot foresee all the options for which something can go wrong and cause your device to malfunction. Therefore, you should clearly understand that all the actions you perform, you do at your own peril and risk. I do not bear any responsibility for the result of your actions. Also, you should understand that as a result of your actions you lose the warranty of the manufacturer / seller, if it was / is.
  • Warning: following this instruction, you should understand that you have NO backup, and if something goes wrong, you will not be able to restore your phone. Therefore, I recommend installing TWRP, make a FULL backup of the entire phone, and then flashing .


Beginner's Guide
How to install a clean stock (factory) firmware without viruses
on phone Homtom HT37


ATTENTION! This manual says what to do to getGUARANTEEDresult.
Please do not arbitrarily do anything beyond what is written in order not to getNOT necessaryresult.


Enable usb debugging. Look in the spoiler.
Become a developer + Enable usb debugging
First of all - you need to enable developer mode.
Go to the "Settings" and select the section "About the phone."
Then scroll down and see the “Build Number”, tap on it seven times.
If you did everything correctly and a sufficient number of times “clicked” on the “Assembly number”, the message “You have become a developer!” Should appear.
Again open the “All Settings” tab and now the “For Developers” section will appear above the “About Phone” item.
We go there and turn on the item "Debug USB".

After that, disconnect the phone from the computer if it was connected. Turn off and set aside.


Go.
Download the file:HomtomHT37_kuzja25mod_V01-20170807- 806 mb.
Make sure that you do not have an HT37 folder on your C: \ hard drive, since the entire file structure will be unpacked there.
The installation package consists of:
  • driver phone Homtom ht37
  • twrp installation kit
  • SP Flash Tool
  • and firmware HOMTOM-P516-HT37-Android_6.0-V01-20170807.

Run the file as administrator:
Attached Image

Wait until the black window of the unpacker disappears, it will look something like this:
Attached Image

After unpacking, the firmware will be extracted, then the folder with TWRP files will be extracted, then the driver will be installed.
Attached Image

and at the end a shortcut will be created for the SP Flash tool on the desktop.
A little note.
I note for fearful viruses: you can open the file as a Rar archive, and make sure that there is nothing dangerous inside, and perform all operations, including unpacking, manually.
If there is a request to install an untested driver, or an unsigned one (I don’t remember exactly, not everybody gets such a window), we also agree and install.


After that, the SP Flash Tool for flashing the phone will be launched.
There is a hint that in this place it is better to close the SP Flash Tool, and reboot the computer "just in case."
After reboot, run the SP Flash Tool shortcut from the desktop, run as administrator.
Run the Flash Tool with administrator rights and right in the settings tick the “DA DL ALL With Check Sum”.
Attached Image


We are guided bythis topicif not clear, write.

I'll tell you briefly.
We need to select the scatter-loading file (underlined in red), clickchoose (circled in red)

Attached Image


- and choose:

Attached Image


if you want to flash only twrp - we make a double-click in the window on the TWRP folder - and select MT6580_Android_scatter.txt from there
if you want to sew all the firmware - do a double-click in the window on the folder HOMTOM-P516-HT37-Android_6.0-V01-20170807 - and select from there MT6580_Android_scatter.txt
All ticks will standright.

In any case, in order not to erase IMEI from the phone, make sure that the Download mode is selected.
If you select the "Format all + Download" mode, respectively, imei will be erased, and you will have to restore it.


If we sew TWRP:
chose the right scatter - clicked Download - and the computer starts to wait for the phone to appear on the usb port.
Here we stop, pick up the previously switched off phone and take out the battery.
We take the usb cable and connect the switched off phone to the computer. As soon as the phone is recognized and determined, FlashTool will throw a file into it and a green circle will appear.

Next we boot into TWRP: Reboot->power + keys Increase Volume
and do whatever we want. I recommend to make backup.
And here awaits youinstructions for installing firmware via twrp.

Post has been editedond24r - 13.02.18, 08:38



Rep: (55)
AOSP Extended 4.6

This fix fixing scanner.
Ported firmwaremax127328
Instruction
  • Installing firmware
  • Installing Gaps
  • Patch installation
  • P.S.:After the firmware, the gaps and patch do not do wipes

Firmware

Gaps

Patch
Attached fileFix_FP_LOS.zip (1.44 MB)


Post has been editedsetup722 - 17.02.18, 23:04



Rep: (55)
FreemeOS

Hmm .. FreemeOS is a firmware from Leagoo, in this case Leagoo M5. It is a beautiful firmware with a completely normal volume of interesting topics, with various cool things with a scanner (I myself have not checked their work yet, but at least they are present in the firmware The battery holds up well, surprisingly to the 6th Android. The root is sewn, the gaps too, I did not notice any bugs except with buttons, I screwed the camera, the scanner screwed it up after a long time, I didn’t check the connection in my city )
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Firmware
GoogleDisk
Patch with a small fix, scripts, tweaks and otherAttached fileFix_Stok.zip(646.02 KB)


If the scanner does not appear, then we fix
Attached fileFix_FP_LOS.zip(1.47 MB)

We look, we estimate, we draw conclusions. : thank_you:

Post has been editedsetup722 - 01.07.18, 14:43
Reason for editing: Patch



Rep: (55)
iOS 10

Of the bugs only the scanner, the buttons seem to be normal, there are no LEDs either.
P.S.: scanner is not treated, at least for now.
The link will appear soon, the firmware is nice, please add to the header.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Download

UPD: by default it is for one snapshot, who needs a two-put patch, two will work but one will be shown
Patch:https: //drive.google.c...rM3NN3_aWBpHd2nUcnNABH

Post has been editedsetup722 - 05.03.18, 19:18



Rep: (55)
ViperOS

Bugs: the same as the sevens usually scanner buttons, LEDs
Screenshots
Who is not difficult, skinte

Download
GoogleDisk
Patch from viper developers:Attached fileViper Fix.zip(10.46 MB)



Rep: (55)
Ressurection remix 5.8.5

Bugs: the same as on the sevens, scanner, buttons, LEDs
Screenshots
Who is not difficult, please skip

Download
GoogleDisk
Patch (if the sound or the camera does not work):Attached fileFix.zip(4.4 MB)


Posted 06/03/2018 18:21:

* rauf655 , throw a link, if possible, porting

Posted 06/03/2018 at 6:25 pm:

MokeeOS Nougat

Bugs: the same as other sevens ported by me
Screenshots
Not yet

Download
GoogleDisk
Patch (if there is no sound or camera with defects):Attached fileFix.zip(4.4 MB)


Full version    

Help     rules

Time is now: 12/08/20 02:00